Related
I decided to round up all of the cases for the HTC Universal for reference:
Piel Frama (1 case... also available on Expansys as the "Chairmans Case")
- http://www.pielframa.com/imate_jasjar.htm
PDair (2 cases, both with belt clips)
- http://www.mobilefun.co.uk/product/7749.htm
- http://www.pdair.com/scripts/main/viewitem.php?itemid=1998&pdaid=190
XaX (2 cases)
- http://www.expansys-usa.com/product.asp?code=125516
- http://www.expansys-usa.com/product.asp?code=125869
- Nutshell
http://www.tuff-as-nuts.com/209-210.html#
I have ordered the XaX cases with the intention of sending one back... I will post a full analysis with lots of pics.... it's sad that there are not a lot of pics around of these two !
BTW, here's a nice review of the Proporta case...
http://www.clieuk.co.uk/execbookcase.htm
Thanks for the summary - very useful indeed. I'm looking for something like the Piel Frama or Xax (2) case but the keyboard must NOT be covered - which I believe it is with both of these, although it is hard to tell from the photos.
I have found another case by Krusell which looks quite good:
http://www.krusell.se/product.php?s=2&product=2095
Sold here:
http://www.expansys.com/product.asp?code=127398&asource=119353
Anyone got one?
Mods:
Should this be in accessories ?
Sorry...
@page 3:
Wow... the Krusell one looks pretty good !
Hole for ear... belt clip... window for screen... Hmmmmm.... !
The only thing its missing is elastic stretchy sides to block the SD card from falling out while still being able to open the case.
case
i like the krussel or the xax #1.
am interested in feedback on the xax, as I really just want something simple to make the carrying of it easier. if I need it, i just want to take it out of the case entirely, then when finished put it back. most cases are designed to keep it inside the case. i think the clam design prevents the need for a protective permanent case, so something to make it easier to carry it would be handy.
But yes, the krussel looks good if I felt it needed protection...
So any feedback on the Xax 1 would be good, and if any body does by the krussel, let us know.
Re: case
simon_darley said:
...any feedback on the Xax 1 would be good...
Click to expand...
Click to collapse
I've had the XAX 1 for about a week now and it's just what I was looking for. Like you, Simon, I was also interested in just something to carry the Universal as I prefer to take it out completely to use it. The XAX 1 certainly does the job.
The magnetic closures make it very easy to take it out of the case and put it away. The fit is not too tight to make it difficult to remove and replace but tight enough to feel secure. It's not going anywhere. And it may seem a small thing, but I also like that the magnets make the removal and replacement of the Universal into a silent operation without zipping or velcro or snaps to announce what you're doing. It's not a big deal, but it was a nice little bonus.
The concern I had with this case was the belt clip since it is an actual clip and not anything that locks in place. My previous "belt" cases with other PDAs had the locking type clips. This one just hooks on to the belt, but it feels very secure. There seems to be no question of it slipping off of a belt and I've even used it just hooked on to jeans (without them falling down, despite the Universal's weight!) when not wearing a belt. I can see where there is more of a chance that it could come unhooked when just on jeans like that, but I haven't had that happen yet.
One advantage to the locking clips was the ability to allow the case to swivel which this one does not have. After using it though, I like the horizontal orientation and now prefer that it doesn't swivel actually. I don't have to take the case off or swivel it around every time I sit down.
I'm planning to eventually get the PDAir (most likely) for times when I want the Universal protected even while in use, but I would only use that in certain environments where I was worried that it might get damaged if taken out completely. Most of the time I plan to use the Xax.
I am not sure I get how the Xax 1 works.
Is it like a holtster, where you just slide the JasJar in?
What is the magnetic closure for, is that a tab that closes over the top opening?
How are the sides protected?
Care to post some pictures?
I'm at work, so I can't post any pictures right now (they probably wouldn't be all that happy that I was positng in the first place, but hey, it's lunch!)
It is like a holster and the JJ just slides in. As you suspected there is a leather tab that goes over the top to help protect and hold it in (though the fit is tight enough that I don't think holding the JJ in is really all that necessary.) It doesn't go completely across the top, but leaves room on one end so that you can use the headphone jack while it's in the case (as long as you put the JJ in it with the camera facing out.) Beyond that, the top is protected. There is leather on both sides, so they are protected as well. On the bottom, there's a large cut out in the middle that allows you to push up on the JJ to take it out more easily as well as two other small cut outs for the speakers.
I'll try to see if I can get some pics together later tonight.
Hi everyone,
I got the XaX #2 case today (the magnetic snap one, NOT the belt clip) and well... it's not that great.
First of all, the Jasjar won't fully close when it's inside... the leather strip that holds down the keyboard gets in the way of the screen. I've tried a bunch of different positions, and no dice.
Also, the camera hole is uncovered, but the earpiece is not so you can't use the phone when the case is closed.
The magnetic snap is nice and strong though, and the leather is of good quality.
However, in terms of functionality, it's not that great. I'll post pics later.
ikaris said:
...the Jasjar won't fully close when it's inside...
Click to expand...
Click to collapse
So I guess XaX may have a hit and a miss with their two cases. Thanks for passing that along because I think that is a concern.
I've wondered if the Piel Frama case will have the same "closing" issue. In some of the pictures on their website it looked like the JJ may not have been all the way closed. I had one of their cases for a Dell Axim 5 and it was of very high quality but the "closing" question concerns me.
I'd love to hear from anyone who gets a Piel Frama.
Same here. I am interested in the Piel Frama case or the Krusell. Both look pretty nice and seem to have the proper cut outs for all buttons and such. Just wondering which one seems to fit the device better.
I am currently using the case that came with the iPaq 5500 series. This fits the XDA Exec perfectly and is ideal if you want to use the case for storing the Exec and taking it out of the case for use.
Simon
kelford said:
So I guess XaX may have a hit and a miss with their two cases. Thanks for passing that along because I think that is a concern.
I've wondered if the Piel Frama case will have the same "closing" issue. In some of the pictures on their website it looked like the JJ may not have been all the way closed. I had one of their cases for a Dell Axim 5 and it was of very high quality but the "closing" question concerns me.
I'd love to hear from anyone who gets a Piel Frama.
Click to expand...
Click to collapse
I have received my Pielframa case a couple of days ago. The Pielframa does not have a closing issue. Also it fits perfectly. Besides that it does not use a plastic 'pouch'. That is terrible. I owned a Qtek 9090 which the case also had a plastic 'pouch' to cover the keyboard. It is a dust collector. My keyboard got very dirty and I could not get the stain away. Luckily Pielframa did not use this design.
simba said:
I have received my Pielframa case a couple of days ago. The Pielframa does not have a closing issue. Also it fits perfectly. Besides that it does not use a plastic 'pouch'. That is terrible. I owned a Qtek 9090 which the case also had a plastic 'pouch' to cover the keyboard. It is a dust collector. My keyboard got very dirty and I could not get the stain away. Luckily Pielframa did not use this design.
Click to expand...
Click to collapse
Just want to confirm 100% before ordering the Pielframa case - you are saying that the keyboard is NOT covered by any plastic? It isn't clear from the photo. Thanks.
simba said:
I have received my Pielframa case a couple of days ago. The Pielframa does not have a closing issue. Also it fits perfectly. Besides that it does not use a plastic 'pouch'. That is terrible. I owned a Qtek 9090 which the case also had a plastic 'pouch' to cover the keyboard. It is a dust collector. My keyboard got very dirty and I could not get the stain away. Luckily Pielframa did not use this design.
Click to expand...
Click to collapse
Thanks for giving an update! That's good news that the Piel Frama doesn't have the closing issues that was found with the XaX 2 case. I know how well PF cases are made, so I may have to get one of these (or at least put it on a gift wish list!) since I find I like to use different cases depending on circumstances.
How does it feel in terms of added bulk? It seems designed to be on the device most if not all of the time, so I wondered how it really feels when used every day?
Take a look at this one: http://www.mobilefun.co.uk/product/7866.htm
seems reasonalbly priced
One thing though..........
Click on larger image.
first pic you see is the belt clip side
click the next pic and where you would expect to see the closing flap thingy, you see a plain flat side!?!?
Am I missing something?
Codiac said:
Am I missing something?
Click to expand...
Click to collapse
I don't understand that either. Where did the flap go?
I'm supposed to be getting pictures together (having regular PC issues at home) so I can show the XaX 1 in use, but the general construction looks similar to the one in the link, but the XaX has a bigger flap. And it doesn't hide anywhere either!
page3 said:
Just want to confirm 100% before ordering the Pielframa case - you are saying that the keyboard is NOT covered by any plastic? It isn't clear from the photo. Thanks.
Click to expand...
Click to collapse
Yes, it is not covered by any plastic.
The case does make it feel more 'bulky'. In the daily usage you could leave the it in case without the need of taking it out. I can answer the phone by not having to open the case. Of course you do need to open it to be able to make a phone call.
Well there seems to be a lot of views about the best cases out there, just wondered what the most 'pocket friendly' case was?
Don't care about the material as long as it isn't a sock or a stick-on option (ie an actual case)
Definitely no belt loop, preferably a very low profile clasp etc...
Basically just want something that is likely to stop it getting scratched up in a bag or if it was dropped, but don't need full armour!
Any good suggestions?
I've been looking for something pocket friendly as well... I'm almost ready to just get a thin sunglass pouch... currently I'm using a case for a Sprint Mogul, but it has a belt clip...
i use an ipod slip case, and have pulled off the belt clip, gives good protection to the screen,
going to order a leater slip case from www.pdair.com to see what thats like
I've got one of these - http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=6561
Doesn't add much to the size at all, and I keep mine in my pocket all the time.
Here is what I'm using, it comes in Black, Brown or Pink:
http://www.wirelessground.com/tiltflipblack.html
It covers the back and front very well, the cut outs are aligned very well, it has a slimmer form factor than the Krussel Orbit I normally use.
Here is the one my spouse uses, it comes in Black or White:
http://www.boxwave.com/products/dlsleeve/at_t-tilt-designio-leather-sleeve_2906.htm
I just ordered one of these yesterday. I will let you know how it is hopefully tomarrow or over the weekend.
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
SpeedRazr said:
I just ordered one of these yesterday. I will let you know how it is hopefully tomarrow or over the weekend.
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
i would be interested in your opinions and if you could confirm these points for me:
1) Can you still use the touch screen?
2) If the slide up and tilt works fine with the case on
3) The general quality and how bulky it is in a pocket
this looks perfect for me as i wanted a 2 piece armour case where i could still slide open the phone
scharnet said:
Here is what I'm using, it comes in Black, Brown or Pink:
http://www.wirelessground.com/tiltflipblack.html
It covers the back and front very well, the cut outs are aligned very well, it has a slimmer form factor than the Krussel Orbit I normally use.
Here is the one my spouse uses, it comes in Black or White:
http://www.boxwave.com/products/dlsleeve/at_t-tilt-designio-leather-sleeve_2906.htm
Click to expand...
Click to collapse
The "tiltflipblack" is made by PDair and is available for 1/2 that price. I've had one for several weeks and it still looks new, and I wear it every day. It's the perfect case for me.
The slimest most "pocketable" case I've found yet, is the formfitting Noreve case as seen here:
http://www.pocketpcfreak.com/archive/00006945.htm
It is also one of the very few - true - formfitting cases (using a laminated leather design, w/o the ugly and disturbing plasting cover over the KB. It protects the front and back really well, if not so much the sides. Easy to use and good workmanship.
Actually it IS meant (IMO) for pocket carrying.
Have it for about a month, still looks as new. If however looking for a drawback, then to my daily use pattern there is one. While in the case using the Kaiser/Tilt for navigation (in a cradle) needs taking it out of the case.
======
Saar
I've tried several ...
Tothotspur said:
i would be interested in your opinions and if you could confirm these points for me:
1) Can you still use the touch screen?
2) If the slide up and tilt works fine with the case on
3) The general quality and how bulky it is in a pocket
this looks perfect for me as i wanted a 2 piece armour case where i could still slide open the phone
Click to expand...
Click to collapse
Just wanted to add my comments based on owning 4 different cases for the Tilt/Kaiser ...
The PDAir aluminum cased is good and pocketable. It is a little on the heavy side, but I've carried it arond now for a couple of weeks and it's all right. The downside is that there is a hard plastic protector over the touchscreen of the Tilt. You have to open the case to use the touchscreen or you have to take the hard plastic out. You can either cut out or push it out with some force, but the plastic is glued in and is under the neoprene that cushions the Tilt against the case. Not the smallest feel in the pocket, but no leather covered cardboard bulk feel. The size of this reminds me of a naked 8125 in my pocket (did that without disaster for almost 2 years).
I also tried the PDAir leather flip case. That one is definitely not pocketable unless you have some REALLY big pockets. And I'm not a big flip cover guy. Another strike is the plastic keyboard cover.
I also tried the Noreve and it's a nice leather case. I would consider this one pocketable, it's rather slim. But it has the flip cover. The good thing is that it has no plastic keyboard cover. It's a little loose when you close the cover with the snap. It's not loosely held in ... that's a good fit. But the snap doesn't hold the flip cover down as firmly as I'd like.
Lastly, I JUST snapped on one of the plastic snap-on kind. Good fit, but not sure how much the plastic will help in a fall. It snapped on tightly ... so tightly it took 15 minutes to get it off! I did not like that at all. If something goes wrong and you need to drop the battery quickly ... 'quickly' won't happen with this case. You can still use the touchscreen and it's a very tight snap on fit. Doesn't add much bulk or weight for pocket storage. NOTE: if you pick one of these up, be careful and check whether the belt clip button on the case is screw on or permanent. The permanent ones won't be pocketable.
The best feel in the pocket is the plane Tilt/Kaiser with no case. But I know I'm pushing my luck if I continue to do that. Still switching up to see what I end up liking most. Hope this info helps folks.
Tothotspur said:
i would be interested in your opinions and if you could confirm these points for me:
1) Can you still use the touch screen?
YES!
The openings for the keypad and LCD are tappered to provide the best access to the edges but they become alittle harder to get at due to the thickness of the plastic.
2) If the slide up and tilt works fine with the case on
Yes the screen slides out and up to the normal position. The upper softkeys are silightly harder to get at when tilted due to the tickness of the plastic.
3) The general quality and how bulky it is in a pocket
Fit was tight, and snapped into place. I do not plan to use the clip as it is optional, but I will follow up with a proper review and test it out. I will get exact mesuraments later but it is not a big change and well worth the extra size.
this looks perfect for me as i wanted a 2 piece armour case where i could still slide open the phone
Click to expand...
Click to collapse
Yup! Cheap Too!
I will follow up with a better review tonight.
What I do not understand about using the transparent plastic snap, is why the hack would one need a case at all when all the really "pocket sensitive" components (Touch screen, Camera lens) are not covered at all... IMO if one is indiferent to this, they may not need a case at all.
I guess that all cases are kind of trade offs. Whatever protects adds bulk in the zones protected, light protection protects less than heavy armor but presents snappier use and so on.
The potentially best solution I've seen yet is actually not offered for the Tilt/Kaiser. It is made by EB Cases and called the eNovo. It is made of sturdy yet thin laminated leather, offering a form fitting case with an optional leather flip.
http://www.ebcases.com/-strse-3333/eNOVO-PAQ-6500/Detail.bok
I'm trying for some time to convince EB, Noreve and BoxWave (the ones apparently having the technology) to think about it...
Cheers,
======
Saar
thanks kahibbi and SpeedRazr for your input, i look forward to your review
SpeedRazr said:
I just ordered one of these yesterday. I will let you know how it is hopefully tomarrow or over the weekend.
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
I picked this up from DayDeal.com and it didnt' fit my ATT tilt. the back does but the front will not stay on
i picked up the alum. case for travel and biking it is perfect. also from DayDeal
Hey guys/gals, just thought I'd share this with you. I bought this case for my Tilt and it's one of the best I've had. The phone fits perfect in this case. Snug but easy to get out. I paid $12 on ebay for it. Make sure you buy the one with the attached belt clip (like in my pic). There is another one on there that allows you to change the belt clip. I had that one too but (same perfect fit) but unless you have a thin belt, the clip will not catch the belt. I'll include one of my previous cases. This one is just a better looking case and feels real sturdy. Hope you like it.
Have you seen a case that exposes the miniUSB port? I've seen a lot of good cases, but none that will expose the miniUSB. My second option would be just to go with the Seidio Slim Ruberized case.
Kraize
Kraize92 said:
Have you seen a case that exposes the miniUSB port? I've seen a lot of good cases, but none that will expose the miniUSB. My second option would be just to go with the Seidio Slim Ruberized case.
Kraize
Click to expand...
Click to collapse
Unfortunatly no I haven't. There's a thread on here that has the Seido clip with mods on it. Looks sweet.
I recently had bought a case for my Wing (before getting the tilt) and it fits the tilt perfectly and allows access to the usb port - unfortunately it seems the ebay seller is no longer registered so I can't even get the details from the auction.
This is HTC branded and the listing was titled NEW HTC TOUCH SHADOW MOGUL VX6800 MDA OEM LEATHER CASE
Edit - Found the case, different seller and more expensive, but you can see it - http://cgi.ebay.com/OEM-Leather-Case-Pouch-for-HTC-Wing-P4350-Herald-XV6800_W0QQitemZ150268701210QQihZ005QQcategoryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I've got the Krusell Orbit leather case with multidapt and I really like it, I've tried several so far and this is the one that I'm keeping...
http://www.krusell.se/product.php?productID=2776&category=51
I've also got the Krusell CarHoldicKit adapter as well to go with it, I like being able to unclip my phone from my belt with the clip still remaining on my belt, and attach to dashboard while driving, it makes using the GPS very easy and other related accessories as well...
dampeal said:
I've also got the Krusell CarHoldicKit adapter as well to go with it, I like being able to unclip my phone from my belt with the clip still remaining on my belt, and attach to dashboard while driving, it makes using the GPS very easy and other related accessories as well...
Click to expand...
Click to collapse
It works that well? I was interested in both the orbit and carholickit (think i still have an old one), but was thinking the flap would be in the way when using it for GPS? This isn't the case?
airjer said:
It works that well? I was interested in both the orbit and carholickit (think i still have an old one), but was thinking the flap would be in the way when using it for GPS? This isn't the case?
Click to expand...
Click to collapse
The flap and GPS? No, I have my mounted like this, so when I open flap it just rests on dashboard:
If you wish you can read my full review of the Orbit HERE, lots of pictures etc included of course
dampeal said:
I've got the Krusell Orbit leather case with multidapt and I really like it, I've tried several so far and this is the one that I'm keeping...
http://www.krusell.se/product.php?productID=2776&category=51
Click to expand...
Click to collapse
That's the one I've just bought... and I like it a lot. Fits really well although the slideout keyboard doesn't slide as smoothly now it's in the case.
dampeal said:
The flap and GPS? No, I have my mounted like this, so when I open flap it just rests on dashboard:
If you wish you can read my full review of the Orbit HERE, lots of pictures etc included of course
Click to expand...
Click to collapse
Thanks for the GREAT review.
I have this HTC OEM case and it's real nice and pretty cheap. Fits perfectly with the Seidio case installed on the Tilt.
I recently purchased the Seidio rubberized case/holster combo. This is an excellent product. I was looking for protection for the Tilt's body, however, wanted to access the screen. I was using the metal case from Monaco, very well built, however, twice my Tilt fell out of the case when the unit was on my belt and the latch caught on the bumper of my car and the Tilt when bouncing on the pavement. Also, my signal was very weak with the metal case, never realized this was the problem as I always used a metal case. I switched to this combo unit and I now have an extra 1-2 bars of signal regularly. Also, I like the fact the holster will hold the unit with the skin in place, faces inward, giving max protection to the screen which is easily accessed. If you want a case to protect the body of the tilt, access the screen easily, and use with a belt clip (do not have to use the clip holster), I could not imagine a better choice. I am very happy with the quality and design of the unit.
https://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSRCG8925-BK
jim131 said:
I recently purchased the Seidio rubberized case/holster combo. This is an excellent product. I was looking for protection for the Tilt's body, however, wanted to access the screen. I was using the metal case from Monaco, very well built, however, twice my Tilt fell out of the case when the unit was on my belt and the latch caught on the bumper of my car and the Tilt when bouncing on the pavement. Also, my signal was very weak with the metal case, never realized this was the problem as I always used a metal case. I switched to this combo unit and I now have an extra 1-2 bars of signal regularly. Also, I like the fact the holster will hold the unit with the skin in place, faces inward, giving max protection to the screen which is easily accessed. If you want a case to protect the body of the tilt, access the screen easily, and use with a belt clip (do not have to use the clip holster), I could not imagine a better choice. I am very happy with the quality and design of the unit.
https://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSRCG8925-BK
Click to expand...
Click to collapse
i second that one. ive gone thru metal, silicone, plastic and even leather cases for my tilt. none of which seemed to work until I went with the seidio innocase holster combo that the gentleman above me stated. its really the best case and it comes with the holster facing inward so you can have maximum protection for your phone with easy access. point blank period.
thetruth1985 said:
i second that one. ive gone thru metal, silicone, plastic and even leather cases for my tilt. none of which seemed to work until I went with the seidio innocase holster combo that the gentleman above me stated. its really the best case and it comes with the holster facing inward so you can have maximum protection for your phone with easy access. point blank period.
Click to expand...
Click to collapse
With that case do you have to face it inside, and is it really worth $50.00? Geez their high.
I already have a soft rubber case and wondering if I could get buy just buying the holster for it.
texas said:
With that case do you have to face it inside, and is it really worth $50.00? Geez their high.
I already have a soft rubber case and wondering if I could get buy just buying the holster for it.
Click to expand...
Click to collapse
not necessarily, you could face it either way and its worth it. believe me, its worth it. even though its a little pricey.
The rubberized case is good. I gave up on the holster because the clip kept getting caught and would disengage the phone causing it to fall.
I got a Palm Treo case and it fits perfectly. The Seidio case also prevents the Tilt's buttons from being accidentally pressed.
This is the best combination of all the cases I have tried.
grymicast184rc said:
I have this HTC OEM case and it's real nice and pretty cheap. Fits perfectly with the Seidio case installed on the Tilt.
Click to expand...
Click to collapse
This is the same case I have. Been very happy with it! For the person who asked... it does leave the USB port exposed.
mrschwarz said:
The rubberized case is good. I gave up on the holster because the clip kept getting caught and would disengage the phone causing it to fall.
I got a Palm Treo case and it fits perfectly. The Seidio case also prevents the Tilt's buttons from being accidentally pressed.
This is the best combination of all the cases I have tried.
Click to expand...
Click to collapse
what holster were u using
GuySparkz said:
what holster were u using
Click to expand...
Click to collapse
I bought the Seidio case and holster combo kit.
Unlike most here, I want to be able to put my Kaiser in a case, and put in my pocket. No swiveling, no clipping, and no holstering. I know the Kaiser doesn't have the most pocket-friendly form-factor, but hell, I have to make do with what I've got.
The slimmer and lighter the case, the more pocket-friendly it is.
Any recommendations?
I'm considering:
PDAir's Vertical Leather Pouch http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=6590
& Seido's super slim rubberized case http://www.htcforums.com/kaiser-tilt-tytn-p4550-f13/seido-slim-case-t11.html
& PDAir's Aluminum case http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=6561
Be very careful of the screen in your pocket. Two of your choices will not protect the screen. Good luck.
I've tried several different cases, and I too have opted to just keep the phone in my pocket. And I don't use any protective covers, but I do so with some rules.
1. NOTHING in the same pocket with it.
2. Always screen facing toward me.
3. ALWAYS be aware it is in my pocket. (IE, no bumping into anything, no leaning on anything, and no squating down and putting my phone in a bind)
I have to say after 10 months of use, it still looks almost new.
GWelker62 said:
I've tried several different cases, and I too have opted to just keep the phone in my pocket. And I don't use any protective covers, but I do so with some rules.
1. NOTHING in the same pocket with it.
2. Always screen facing toward me.
3. ALWAYS be aware it is in my pocket. (IE, no bumping into anything, no leaning on anything, and no squating down and putting my phone in a bind)
I have to say after 10 months of use, it still looks almost new.
Click to expand...
Click to collapse
your mind reading skills are awesome!
That is exactly the way i carry mine ... With the execption of when I am at work I slip it into a leather eyeglass case I found, to keep dust and grime off it.
otheruser said:
PDAir's Vertical Leather Pouch http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=6590
Click to expand...
Click to collapse
I've used this case for a long time (had a similar one for my Wizard) and really like it:
http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=6562
Only downside is the top and bottom do add thickness to the phone overall, but during the summer when I'm wearing cargo shorts, it goes into my pocket nicely. Biggest downside is the case fits tight so if you are on the phone the slightest bump will tend to hang up the call (or other buttons get pressed). So now I'm looking at a new case they offer:
http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=7423#thumb
This leaves the buttons exposed, gives you a cover over the screen, and then with a simple unsnap you can get to the keyboard (and it appears no plastic cover over the keys like the one I have now.
I really like the Seidio Slim, but I really need a flap to cover the screen for protection (whether its in my pocket or on my belt, I just don't like the screen being unprotected). I wish the Seidio holster had a removable clip as that could be workable then...
depending on the size of your pocket, the krusell orbit works quite well
I use the seido rubberized one with a screen protector
psionandy said:
depending on the size of your pocket, the krusell orbit works quite well
Click to expand...
Click to collapse
Here, Here!! Another vote for the Orbit, it takes a few to get used to, but after dropping it twice, and not a dent.. i like it!
if im up to something where it might get bashed by accident then i use my PDAir's Vertical Leather Pouch, as it covers the screen nicely
mfrazzz said:
So now I'm looking at a new case they offer:
http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=7423#thumb
This leaves the buttons exposed, gives you a cover over the screen, and then with a simple unsnap you can get to the keyboard (and it appears no plastic cover over the keys like the one I have now.
I really like the Seidio Slim, but I really need a flap to cover the screen for protection (whether its in my pocket or on my belt, I just don't like the screen being unprotected). I wish the Seidio holster had a removable clip as that could be workable then...
Click to expand...
Click to collapse
I bought one just like the new PDAir, but it was a cheap ebay case. Best $15 I've spent - has saved the phone from a number of drops, fits really well, and still fits in my pocket (it does add bulk, but an acceptable amount and I really wanted something to cover the screen).
Everything is easily accessible, and using the keyboard is a breeze.
The only drawback is if you're slipping between a car and your pocket. I've got a metal case for it in silver (It's actually the Hermes case) that i use but most the time I don't bother. It's not been too bad. But then, I am covered by Insurance
I've never had one before, but heard good things about the Seidio case. It's available for order now.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CSR2HTFE-BK
I just ordered the case and clip combo.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSR2HTFE-BK
Might get the Innodock Jr. charger later.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CRJHTCX1-BKC
OlSarge said:
I've never had one before, but heard good things about the Seidio case. It's available for order now.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CSR2HTFE-BK
I just ordered the case and clip combo.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSR2HTFE-BK
Might get the Innodock Jr. charger later.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CRJHTCX1-BKC
Click to expand...
Click to collapse
I owned the seidio clip holster for my Kaiser and loved it!! Very sturdy and comfortable. Will definitely be ordering one for my Rafael.
Have the hybrid case for the Kaiser. It still is a top-notch case (once Seidio gets their head out of their ass about their online support).
Just got the Innocase and it's much much better quality than the other Amazon one.
Another truly excellent case after the hybrid Seidio case on the Kaiser.
First 3 pictures are of Innocase
4th is with Amazon's case's top with thick borders around the screen
5th is comparison of these "Touch" screen border thickness.
Macro-mode for those that haven't figured it out in the Youtube videos. Yes, Amazon's case has its rubberization already peeling before I took it out of its shipping packet.
4th is with Amazon's case's top with thick borders around the screen
5th is comparison of these "Touch" screen border thickness.
Very illuminating photos - thank-you!
Was "reasonably certain" that would not find using the Touch Screen with a FINGER all that attractive - after all, have hardly ever used my Axim without the Stylus.
But in actual practice find that it IS often convenient to simply swipe a finger at the screen, and so your comments about the relative Screen Border Thickness - and hence the possibility of interference with finger-contact near the edges of the screen - are very interesting.
Still, $30 seems a lot for small hunk of plastic....
rkistler said:
But in actual practice find that it IS often convenient to simply swipe a finger at the screen, and so your comments about the relative Screen Border Thickness - and hence the possibility of interference with finger-contact near the edges of the screen - are very interesting.
Still, $30 seems a lot for small hunk of plastic....
Click to expand...
Click to collapse
As illustrated, the Seidio case is thin (on width) around the screen leaving plenty of space for finger-gestures. Hitting X and menus at bottom is no problem. The Amazon case felt like it was a 8525 again.
There's also velvet in the case back so it doesn't scratch the OEM smooth back. This raises the back a few mm above the original diamond plate, but with the speaker hole, it's all around good protection.
For $30, Seidio tends to be the first and last case you'll ever get because it's a perfect fit, and solid at protection and surviving drops. Only reason to switch to another case is they come out with some other fancy idea such as a hybrid rubber-crystal case + holster, or other colors. I would go for a white case.
I paid $8 (total) for the Amazon case and you can see what I got. Horribly fitting, messes with the slider, rubberization peeling before it came out of the bag. $30 isn't that bad especially since I'm still very happy with the hybrid-case I got for my Kaiser last year.
edit:
whatever case you guys end up getting, I have to say my FUZE is a much more pleasant beast now that the cold, slimy feeling is gone.
the amazon case you purchased is not a good example of the other options out there. I am not saying anything negative about the Seido case. I have seen it personally and it is a nice case, but the one on Ebay that many are buying is also pretty nice, and no issues with the pealing your pictures showed. The employees in my company have 6 Fuze phones and no one has had any issues like that. The biggest illusion with the phone shown at http://forum.xda-developers.com/showthread.php?t=459761 is that the border is white and not black like the rest of the case.
The $30 cost is the main objection, but in general Seido makes quality cases.
Overall it is very positive that there are multiple options now available and more coming each day.
does this one interfere with teh screen as reported on the other amazon/ebay one? something about the inside of the upper left corner pressing down on the screen makes one unable to use the screen after having the case on for a few days... the only way to resolve this with the other one is to file down the inside of the plastic part that touches the screen...
shade
shadeone said:
does this one interfere with teh screen as reported on the other amazon/ebay one? something about the inside of the upper left corner pressing down on the screen makes one unable to use the screen after having the case on for a few days... the only way to resolve this with the other one is to file down the inside of the plastic part that touches the screen...
shade
Click to expand...
Click to collapse
I'm interested in the answer to this question too. My initial attempt at sanding down my rubberized ebay case was not successful, my phone still locked up after a couple of days.
Fuze innocase owners, are you lockup free after days of operation?
jknuckey said:
I'm interested in the answer to this question too. My initial attempt at sanding down my rubberized ebay case was not successful, my phone still locked up after a couple of days.
Fuze innocase owners, are you lockup free after days of operation?
Click to expand...
Click to collapse
on your ebay case, why are you still locking up? mine is not locking up anymore at all after sanding down a little on the inside upper left side?
TVDinner said:
but the one on Ebay that many are buying is also pretty nice, and no issues with the pealing your pictures showed. The employees in my company have 6 Fuze phones and no one has had any issues like that. The biggest illusion with the phone shown at http://forum.xda-developers.com/showthread.php?t=459761 is that the border is white and not black like the rest of the case.
Click to expand...
Click to collapse
Just because you're happy with the work you put into fixing your Ebay case does not mean you should troll other case threads to protect your investment and mind-share about it. Also stating that I'm not a Seidio apologist since I haven't had the greatest shipping experience last time around, and their CS/managers lying back-and-forth about it.
Lock-ups? Are you seriously kidding? That's a red-flag for me right there. Even the Amazon case doesn't have that problem.
The Innocase is a perfect fit with no modifications necessary. That's what paying a slight premium gets you. Costs less than getting the Expansys Touch Pro back too.
It's like paying for the unlocked version of the phone. No crapware, loads of accessories, and special attention to details the cut-rate version doesn't have.
I've noticed the Ebay case has a huge clip tab right next to the volume-up button. The Seidio case clips seem to be more thoughtfully placed, and smaller, thinner. In fact, the bottom case has a cut-out curve around the volume/PTT buttons also that helps the case stay out of the way.
Thank you for you info, and no trolling (that made me laugh) intended. I have the ebay case AND have ordered the Seido case, which we were waiting for. Thanks again.
OlSarge said:
I've never had one before, but heard good things about the Seidio case. It's available for order now.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CSR2HTFE-BK
I just ordered the case and clip combo.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSR2HTFE-BK
Might get the Innodock Jr. charger later.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CRJHTCX1-BKC
Click to expand...
Click to collapse
I've had the case, belt clip and charger for a few days. Overall, I'm very happy with the products, and would purchase Seidio equipment again in the future. I've had a few different cases for my old 8525, and I like this one for my Fuze the best.
I love the case. It's not bulky, and has a good feel to it. I wasn't sure about the clips that hold the case to the phone, because they looked fragile...but it holds very nicely.
The belt clip for the case is fine. Seems to hold the phone and case in very well, and the belt clip will not slip off any belt I've tried it on.
The charger...I'm not happy with it. That's my fault not Seidio's, I didn't read the description of the charger. I'm sure it's a quality product. It is a small dock type charger, but comes with a cable with two large USB connections on it. So it can be docked when plugged into a computer's USB. I thought it would have a connection to plug into a wall outlet.
Just bought the combo pack, Will post pics when it arrives.
Just wondering if this case will fit the Bell / CDMA version, is it a rubber type compound, as well does the case scratch the phone in any way?
Thanks
Some questions?
For ppl that have the combo case/holster. Can you put the phone with the case on it, in the holster with screen facing in (screen facing you) and out (screen facing away from you)?
Thanks
TVDinner said:
Thank you for you info, and no trolling (that made me laugh) intended. I have the ebay case AND have ordered the Seido case, which we were waiting for. Thanks again.
Click to expand...
Click to collapse
Hey TVDinner, why did you order the Seidio case? Did your filed ebay case start locking up again?
To answer your question to me in my earlier response, I don't know why my ebay case locked up after my filing attempt. Maybe I didn't file it enough? My tolerance level for trial and error is pretty low, so maybe I'll just order the innocase...
jknuckey said:
Hey TVDinner, why did you order the Seidio case? Did your filed ebay case start locking up again?
To answer your question to me in my earlier response, I don't know why my ebay case locked up after my filing attempt. Maybe I didn't file it enough? My tolerance level for trial and error is pretty low, so maybe I'll just order the innocase...
Click to expand...
Click to collapse
Hi jknuckey - no my ebay case is working great to be honest. no issues at all after my initial filing on it. But I always need to have "the best" case, lol. I was originally waiting for the Seidio one, but they were taking to long and I ordered the ebay one. then shortly after the Seidio one became available, lol.
datruth said:
For ppl that have the combo case/holster. Can you put the phone with the case on it, in the holster with screen facing in (screen facing you) and out (screen facing away from you)?
Thanks
Click to expand...
Click to collapse
There are two models of the holster.
One that fits only just the phone:
https://www.seidioonline.com/ProductDetails.asp?ProductCode=HLHTFEAS
"Seidio's stylish holster provides the ultimate in convenience and functionality by securing your Smartphone on all sides.
- Unique Spring-Clip holds your device securely and lifts for quick access
- Soft-touch "rubberized" texture provides a unique look and extra protection
- Face-in design protects your device's screen
- Locking swivel belt clip with 7 rotating angles
- Easy access to connectors"
One that only fits the phone with the case:
https://www.seidioonline.com/ProductDetails.asp?ProductCode=HLHTFEASC
"Seidio’s Innocase holster offers the best carrying solution when paired with our Innocase.
- Designed specifically for Seidio Innocases
- Unique Spring-Clip holds your device securely and lifts for quick access
- Face-in design protects your device's screen
- Locking swivel belt clip with 7 rotating angles
- Easy access to connectors
*This holster is designed for use exclusively with our Innocases and will not fit a "naked" device or other manufacturer's products. "
The holsters are custom fit, the phone only goes in facing you.
NuShrike said:
Just got the Innocase and it's much much better quality than the other Amazon one.
Another truly excellent case after the hybrid Seidio case on the Kaiser.
First 3 pictures are of Innocase
4th is with Amazon's case's top with thick borders around the screen
5th is comparison of these "Touch" screen border thickness.
Macro-mode for those that haven't figured it out in the Youtube videos. Yes, Amazon's case has its rubberization already peeling before I took it out of its shipping packet.
Click to expand...
Click to collapse
Hey bro any peeling so far from the Innocase? I just ordered it... I had the ebay one but man screen still freezing after I filed.. bleh...