ArcSoft 5.x MMS threaded problem - MDA III, XDA III, PDA2k, 9090 ROM Development

Is there a way to turn off the threaded message feature in arcsoft MMS client?
I've looked everywhere, I can't find out how to make my messages non-threaded, I don't want the "conversations" just the individual messages.
I have an sx66, WM6.5 Build 21202 WWE R6.1, ArcSoft 5.0.70.24, T-Mobile USA
Thanks

Related

ArcSoft MMS Composer issues on the Qtek 8500, 9100 and HTC TyTN

Has anyone experienced problems with the ArcSoft MMS composer software not being able to process the image sent to the device when set to WAP version 2.0. and displaying unable to send from the device when set to WAP version 1.2? I believe it is a software version issue with the ArcSoft MMS composer software. Any version older then 3.2 seems to have various send or receive issues. I recently updated my rom on the HTC TyTN and the new version of the mms composer works just fine (MMS Composer Version 3.2.0.15)
I have worked with my WAP/MMSC provider to capture packets at the gateway and we are seeing a NACK message being sent from the handset prior to loosing the session. The mms receive log (when set to WAP version 2.0) ends with a Receive result: 413. What does this mean?!
Would it be possible to update the AcrSoft MMS composer within the ext rom on these devices to a version equal to 3.2.0.15 or higher?
Please help!
Problem with MMS Composer
JSarg said:
Has anyone experienced problems with the ArcSoft MMS composer software not being able to process the image sent to the device when set to WAP version 2.0. and displaying unable to send from the device when set to WAP version 1.2? I believe it is a software version issue with the ArcSoft MMS composer software. Any version older then 3.2 seems to have various send or receive issues. I recently updated my rom on the HTC TyTN and the new version of the mms composer works just fine (MMS Composer Version 3.2.0.15)
I have worked with my WAP/MMSC provider to capture packets at the gateway and we are seeing a NACK message being sent from the handset prior to loosing the session. The mms receive log (when set to WAP version 2.0) ends with a Receive result: 413. What does this mean?!
Would it be possible to update the AcrSoft MMS composer within the ext rom on these devices to a version equal to 3.2.0.15 or higher?
Please help!
Click to expand...
Click to collapse
I work with many different brands of HTC and ofcourse there is a lot of problems with MMS. 95% of the cases it is due to wrong configuration. The last 5% it is either memory, previously installed 3rd party software, loosing MMS Config. under Messasing, loosing MMS cathegory, etc. but nothing that couldn't be fixed.

Setup MMS in flashed SoftBank X01HT

Hello,
I bought and flashed to English (rom JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship with Softbank Extended ROM) one X01HT. I'm getting crazy trying to make MMS work in my phone. Can anybody put one tutorial of how to do it?
Two more things:
-I have the "old" Vodafone Mail Flat Rate in my keitai, and it's quite important for me to keep it.
-If somebody have working the threaded MMS Palm app and can explain how to setup it, better.
Thanks!
Sesaru
Please!! Somebody could make work Palm SMS Threaded app in a X01HT? At least, let me know if it possible!!
I tryed this:
1. go to connection in control panel
2. add a new modem connection under "default company network setting" (not under "default internet setting")
3. name the new connection as you like, and choose 3g as connection type
4. set it up as follows
apn: mailwebservice.vodafone.ne.jp
user id: vodafonelive
passwd: q_c_e_f_f_k_n_a_r_l_u_r_q_g_b_l (without the _)
leave domain blank
5. OK to finish
6. go back to connection in control panel
7. change the name of this new company network as "VFJP Network"
Install Palm MMS Threaded (I don't know if it's beta4; can somebody send to me??) and setup like this:
Message center number: +819066519300
Email center number: empty
MMS gateway adress: vfkkmmsproxy.vodafone.ne.jp:8080
MMS URL: http://mms/
Network Profile: VFJP Network
Please, help me!!!
http://forum.xda-developers.com/showthread.php?t=280256
bnycastro said:
http://forum.xda-developers.com/showthread.php?t=280256
Click to expand...
Click to collapse
I read this thread almost all and couldn't find help for my problem
sesaru said:
I read this thread almost all and couldn't find help for my problem
Click to expand...
Click to collapse
With old ROM(before Dec 2nd) of X01HT, no success was reported on 2ch(Japanese BBS), AFAIK.
With DoCoMo hTcZ ROM, some success was reported in Japan.
With newer ROM of X01HT, I and some poeple in Japan succeeded to install Palm SMS app.
Maybe, old ExtROM of Softbank prevented Palm SMS app to work correctly.
FYI:
I uninstalled Palm SMS. It's not good for me.
It doesn't disconnect after send & receive mail.
It doesn't inform me when mail receives.
When I open some mail, the app closes unexpectedly.
Now, I'm happy with Arcsoft MMS client & MMS Resender
B-Driven said:
With old ROM(before Dec 2nd) of X01HT, no success was reported on 2ch(Japanese BBS), AFAIK.
With DoCoMo hTcZ ROM, some success was reported in Japan.
With newer ROM of X01HT, I and some poeple in Japan succeeded to install Palm SMS app.
Maybe, old ExtROM of Softbank prevented Palm SMS app to work correctly.
FYI:
I uninstalled Palm SMS. It's not good for me.
It doesn't disconnect after send & receive mail.
It doesn't inform me when mail receives.
When I open some mail, the app closes unexpectedly.
Now, I'm happy with Arcsoft MMS client & MMS Resender
Click to expand...
Click to collapse
This problems are with Beta 4 also? I think it inform when MMs arrives and also have an option for dissconnect after recieve the MMS. Are you sure?
Anyway, I couldn't setup Arcsoft MMS properly ... Now, I install last ROM aviable (from HTC), and tried ... no lucky. It has MMS client by default. Does this client have "Arcsoft MMS client & MMS Resender"? What is "MMS Resender"?
Bye!!
Sesaru
B-Driven said:
With old ROM(before Dec 2nd) of X01HT, no success was reported on 2ch(Japanese BBS), AFAIK.
With DoCoMo hTcZ ROM, some success was reported in Japan.
With newer ROM of X01HT, I and some poeple in Japan succeeded to install Palm SMS app.
Maybe, old ExtROM of Softbank prevented Palm SMS app to work correctly.
FYI:
I uninstalled Palm SMS. It's not good for me.
It doesn't disconnect after send & receive mail.
It doesn't inform me when mail receives.
When I open some mail, the app closes unexpectedly.
Now, I'm happy with Arcsoft MMS client & MMS Resender
Click to expand...
Click to collapse
Ok
, I got post Dec2nd x01ht... Where did you found info no how to set up MMS? Even Japanese page should be helpful...
sesaru said:
This problems are with Beta 4 also? I think it inform when MMs arrives and also have an option for dissconnect after recieve the MMS. Are you sure?
Click to expand...
Click to collapse
With Palm Messaging beta4, yes.
But, it wasn't correct. I'm sorry.
It doesn't disconnect after send & receive mail.
It shows pop-up message, but, no LED, no sound when mail receives.
When I open some mail, the app closes unexpectedly.
Does this client have "Arcsoft MMS client & MMS Resender"? What is "MMS Resender"?
Click to expand...
Click to collapse
MMS Resender is not a part of MMS client.
http://forum.xda-developers.com/showpost.php?p=1079239&postcount=244
Zgembo said:
I got post Dec2nd x01ht... Where did you found info no how to set up MMS? Even Japanese page should be helpful...
Click to expand...
Click to collapse
#235 & followings will help you.
http://forum.xda-developers.com/showthread.php?t=280566&page=24
Thanks; so, You disrecommend me to install it?
Anyway, I still have the problems when setup my keiti with MMS.
Regards!
Sesaru
sesaru said:
Thanks; so, You disrecommend me to install it?
Anyway, I still have the problems when setup my keiti with MMS.
Regards!
Sesaru
Click to expand...
Click to collapse
Arcsoft MMS client & MMS Resender works with me, too although it sometimes gets hung up on some emails and i prefer to use normal pop3 email.
qtotter said:
Arcsoft MMS client & MMS Resender works with me, too although it sometimes gets hung up on some emails and i prefer to use normal pop3 email.
Click to expand...
Click to collapse
Hello,
I install last ROM from HERMES (RUU_HERMES_HTC_WWE_1[1].35.255.2_1.35.255.102_1.08.00.10_SHIP) and didn't change Extended ROM to the SoftBank one, so I had the MMS Client installed by default.
I got the "Decode Error" almost everytime I receive a message that is not pure text, so I install MMS Resender ... but it didn't solve anything, I thing. Anytime I got the "Decode Error", nothing happens ... I don't know If I have to setup something or similar.
Help!! Is any way there to fix this? WHY I can't receive MMS messages with this mobile and Softbank?
Thanks
Sesaru

MMS Settings / MMS Composer

Hello,
i use Qtek9000 for 3 month, and till today i didnt worried about MMS because i never used. But today I had an idea to send an MMS message so I opened Messaging system, selected from MENU -> MMS Configuration and configured my QTEK with MMS parameters from Operator Site.
The problem that I experience is that after setting MMS I'm still no able to create an MMS, in Messagind didn't apear an account for MMS Messages.
Can someone explain me why? and maybe someone can upload an MMS Composer here. Maybe and update of my MMS Composer will solve the problem.
Thanks in advance,
SchumiX
no one can aswer my question?

How to set up o2 germany MMS with wm6???

I've read a lot on the o2online.de page. but i cant find the settings menu in wm6. sms and mms are using one menu-point, not like in wm5 2 different accounts in messaging menu. i hope someone can help me how to setup mms configuration that i can download/receive and send mms messages. my girlfriend tried to send me a mms, but there comes a hint that mms are saved in incoming (posteingang) till setup mms correctly. and i also had an error that i am in roaming and can't receive messages from there. but my internet is working perfectly, also the email accounts, msn and so on.
hope somebody can help me.
thx in advance
greet

Disable MMS notifications and autodisconnect on WM5

Hi!
I am trying to disable the message (notification) popping up when MMS is being sent. Is it not possible to disable this in Registry ? This is especially needed for WM5. Also, if possible to autodisconnect after sending MMS. The ArcSoft MMS Client seems to have this registry key, but does it not work ?

Categories

Resources