Hello,
I bought and flashed to English (rom JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship with Softbank Extended ROM) one X01HT. I'm getting crazy trying to make MMS work in my phone. Can anybody put one tutorial of how to do it?
Two more things:
-I have the "old" Vodafone Mail Flat Rate in my keitai, and it's quite important for me to keep it.
-If somebody have working the threaded MMS Palm app and can explain how to setup it, better.
Thanks!
Sesaru
Please!! Somebody could make work Palm SMS Threaded app in a X01HT? At least, let me know if it possible!!
I tryed this:
1. go to connection in control panel
2. add a new modem connection under "default company network setting" (not under "default internet setting")
3. name the new connection as you like, and choose 3g as connection type
4. set it up as follows
apn: mailwebservice.vodafone.ne.jp
user id: vodafonelive
passwd: q_c_e_f_f_k_n_a_r_l_u_r_q_g_b_l (without the _)
leave domain blank
5. OK to finish
6. go back to connection in control panel
7. change the name of this new company network as "VFJP Network"
Install Palm MMS Threaded (I don't know if it's beta4; can somebody send to me??) and setup like this:
Message center number: +819066519300
Email center number: empty
MMS gateway adress: vfkkmmsproxy.vodafone.ne.jp:8080
MMS URL: http://mms/
Network Profile: VFJP Network
Please, help me!!!
http://forum.xda-developers.com/showthread.php?t=280256
bnycastro said:
http://forum.xda-developers.com/showthread.php?t=280256
Click to expand...
Click to collapse
I read this thread almost all and couldn't find help for my problem
sesaru said:
I read this thread almost all and couldn't find help for my problem
Click to expand...
Click to collapse
With old ROM(before Dec 2nd) of X01HT, no success was reported on 2ch(Japanese BBS), AFAIK.
With DoCoMo hTcZ ROM, some success was reported in Japan.
With newer ROM of X01HT, I and some poeple in Japan succeeded to install Palm SMS app.
Maybe, old ExtROM of Softbank prevented Palm SMS app to work correctly.
FYI:
I uninstalled Palm SMS. It's not good for me.
It doesn't disconnect after send & receive mail.
It doesn't inform me when mail receives.
When I open some mail, the app closes unexpectedly.
Now, I'm happy with Arcsoft MMS client & MMS Resender
B-Driven said:
With old ROM(before Dec 2nd) of X01HT, no success was reported on 2ch(Japanese BBS), AFAIK.
With DoCoMo hTcZ ROM, some success was reported in Japan.
With newer ROM of X01HT, I and some poeple in Japan succeeded to install Palm SMS app.
Maybe, old ExtROM of Softbank prevented Palm SMS app to work correctly.
FYI:
I uninstalled Palm SMS. It's not good for me.
It doesn't disconnect after send & receive mail.
It doesn't inform me when mail receives.
When I open some mail, the app closes unexpectedly.
Now, I'm happy with Arcsoft MMS client & MMS Resender
Click to expand...
Click to collapse
This problems are with Beta 4 also? I think it inform when MMs arrives and also have an option for dissconnect after recieve the MMS. Are you sure?
Anyway, I couldn't setup Arcsoft MMS properly ... Now, I install last ROM aviable (from HTC), and tried ... no lucky. It has MMS client by default. Does this client have "Arcsoft MMS client & MMS Resender"? What is "MMS Resender"?
Bye!!
Sesaru
B-Driven said:
With old ROM(before Dec 2nd) of X01HT, no success was reported on 2ch(Japanese BBS), AFAIK.
With DoCoMo hTcZ ROM, some success was reported in Japan.
With newer ROM of X01HT, I and some poeple in Japan succeeded to install Palm SMS app.
Maybe, old ExtROM of Softbank prevented Palm SMS app to work correctly.
FYI:
I uninstalled Palm SMS. It's not good for me.
It doesn't disconnect after send & receive mail.
It doesn't inform me when mail receives.
When I open some mail, the app closes unexpectedly.
Now, I'm happy with Arcsoft MMS client & MMS Resender
Click to expand...
Click to collapse
Ok
, I got post Dec2nd x01ht... Where did you found info no how to set up MMS? Even Japanese page should be helpful...
sesaru said:
This problems are with Beta 4 also? I think it inform when MMs arrives and also have an option for dissconnect after recieve the MMS. Are you sure?
Click to expand...
Click to collapse
With Palm Messaging beta4, yes.
But, it wasn't correct. I'm sorry.
It doesn't disconnect after send & receive mail.
It shows pop-up message, but, no LED, no sound when mail receives.
When I open some mail, the app closes unexpectedly.
Does this client have "Arcsoft MMS client & MMS Resender"? What is "MMS Resender"?
Click to expand...
Click to collapse
MMS Resender is not a part of MMS client.
http://forum.xda-developers.com/showpost.php?p=1079239&postcount=244
Zgembo said:
I got post Dec2nd x01ht... Where did you found info no how to set up MMS? Even Japanese page should be helpful...
Click to expand...
Click to collapse
#235 & followings will help you.
http://forum.xda-developers.com/showthread.php?t=280566&page=24
Thanks; so, You disrecommend me to install it?
Anyway, I still have the problems when setup my keiti with MMS.
Regards!
Sesaru
sesaru said:
Thanks; so, You disrecommend me to install it?
Anyway, I still have the problems when setup my keiti with MMS.
Regards!
Sesaru
Click to expand...
Click to collapse
Arcsoft MMS client & MMS Resender works with me, too although it sometimes gets hung up on some emails and i prefer to use normal pop3 email.
qtotter said:
Arcsoft MMS client & MMS Resender works with me, too although it sometimes gets hung up on some emails and i prefer to use normal pop3 email.
Click to expand...
Click to collapse
Hello,
I install last ROM from HERMES (RUU_HERMES_HTC_WWE_1[1].35.255.2_1.35.255.102_1.08.00.10_SHIP) and didn't change Extended ROM to the SoftBank one, so I had the MMS Client installed by default.
I got the "Decode Error" almost everytime I receive a message that is not pure text, so I install MMS Resender ... but it didn't solve anything, I thing. Anytime I got the "Decode Error", nothing happens ... I don't know If I have to setup something or similar.
Help!! Is any way there to fix this? WHY I can't receive MMS messages with this mobile and Softbank?
Thanks
Sesaru
Related
i have installed the Merged version of WM2003SE by SIn, which I must say lookes and works really great! I just have one little problem! I cant send or recienve mms, When i try to send it says "Your message is larger than the sending limit you specified in 'Preferences'. to change the limit, select 'MMS Settings' from the Inbox Tools menu." I can't change it cause i can't see that specific Settings to change the limit is no where to be found, it's like it's missing from the window! All my settings are perfect, I can surf the web everything! If anyone has an idea for my minor problem thats turning into a mounten, please let me know!
Thank you all!!
RE
I suppose you're using O2 XDA II. My problem was a bit different in that I could not view the recieved MMS and my recipient could not recieved my MMS.
I faced a similar problem recently when I tried to use MMS for my O2 XDA II with WM2003SE and ROM v2.06.00. My MMS composer was v2.0.0.13
Apparently, my telco carrier does not recognize v2.0.0.13 as the official MMS composer.
Now it works because I'm using MMS v1.6.0.8 from the original ROM v1.6.00 ie from WM2003.
Hey all,
i have found a new mms program that is currently in beta testing that seems to work so far in wm05. the address is http://electricpocket.com/products/pixermms.html you can find the download there near the bottom, the correct one is where it mentions xda.
i however am unable to test send/receive features because i cant work out how to set up gprs/wap in magneto some help with this would be appreciated.
THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. .. thanks again..
PS dont use local number coding instead use international Number coding
example
09173xxxxxx4 <- local
+639173xxxxx4 <-international
if you cant connect to GPRS you need to connect manually
(Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)
try any of this three cab see which one will work for you
MMS
I wasn't able to get this to work. Stayed stuck on "0% Connecting" even when my GPRS connection was established prior. Funnily enough, if i DIDN'T establish the GPRS connection manually then it said "Authentication OK" even though it wasn't connected to anything! Then it would just hang.
I have to soft-reset to get out of it as "Cancel" does not work.
Using:
WM2005 1.50g
Radio 1.17
i-mate PocketPC
Vodafone NZ
I have not had any joy with MMS Composor 2.0.0.20 for Magneto either (hence why I'm trying this). I am about to install EzWAP 2.5 and try that again. Had some issues with it though, will try again. MMS is just handy to have. You wonder what messages you're missing out on without it
toenailed said:
THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. .. thanks again..
PS dont use local number coding instead use international Number coding
example
09173xxxxxx4 <- local
+639173xxxxx4 <-international
if you cant connect to GPRS you need to connect manually
(Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)
Click to expand...
Click to collapse
Toenailed,
Does this use the Smart/Globe MMS Settings or the Smart/Globe Internet(GPRS) Settings from the Autoconfig app?
Thanks
Sending is work perfectly, but the receive...
pixar 4
hello to all
i have allready tryed that prog and it keeps saying that the messege was reject for unknon reason and to check my card for mms etc
card as mms enable
it says that allways the diference now is the international nunber format now it says 10% 20% to 100% them it gives me the error
i manualy conect but no luck
so i get Messagw rejected- no reason given
wap service unavailable
Please check with you operator ....etc etc
help needed
thanks
toenailed said:
THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. .. thanks again..
PS dont use local number coding instead use international Number coding
example
09173xxxxxx4 <- local
+639173xxxxx4 <-international
if you cant connect to GPRS you need to connect manually
(Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)
Click to expand...
Click to collapse
Toe,
Could you post your settings for Pixer4?
My settings are below and I cant seem to send nor receive..
Thanks..
hi jenellej.. just run the GPRS cab ..
under in Service use Globe MMS Settings or Smart MMS Settings or Sun MMS Settings
for sun
"Gateway"="202.138.159.78"
"MMS URL"="http://mmscenter.suncellular.com.ph"
for GLobe
"MMS URL"="http://192.40.100.22:10021/mmsc"
"Gateway"="192.40.100.20"
for Smart
"MMS URL"="http://10.102.61.238:8002"
"Gateway"="10.102.61.46"
i already try the GLOBE and SUN .. but i havent try it with SMART yet
one last thing .. during sending .. the connectivity will not popup that it is connecting to GPRS .. but Pixer4 will say it connects .. suprisingly it does send without the GPRS Connecting notification appeared .. so its normal that you though it doesnt established a connection but in fact it does ..
PS Dont install also ArcSoft MMS COmposer
I manually configured my connection settings. But there should be no problem using toenailed cab. I used to have problems, maybe because it causes conflict with Arcsoft MMS. I uninstalled it, then it worked!
still doenst work
can ´t get it ti work in vodafone.pt i have tryed every possible combination and still get the message rejected for unknown reason
i will not give up lol
gateway 213.30.27.63
url http://mms/servlets/mms
port 9201
After sending--- device Hang
Hi, after I send the MMS using Pixer, the device just freeze. Any help? I'm using manual configuration for DiGi Malaysia.
Re: After sending--- device Hang
muhelen said:
Hi, after I send the MMS using Pixer, the device just freeze. Any help? I'm using manual configuration for DiGi Malaysia.
Click to expand...
Click to collapse
it takes time for it to send. just wait for it. it will seem it hanged but in fact it isn't. it takes time on "authenticated-ok" but after a while, it goes on smoothly.
for SMART (philippines):
here's the settings for Pixer..
Start/Settings/Connections/Connections
Click Advanced Tab, choose Select Networks
Under "Programs that automatically connect to the Internet should connect using:", click new.
Under General Tab:
Enter a name for these settings: Smart MMS
Under Modem Tab:
Tap new, enter a name for the connection, select "Cellular line (GPRS)" then tap next.
Access point name: mms
Click Next then Finish.
NOw open Pixer4.
Tap Options/Preferences/Advanced.
Wap Gateway IP Address:
10.102.61.46
MMS URL:
http://10.102.61.238:8002
Service:
Smart MMS
Click OK, check "Get Message Immediately" then OK.
for GLOBE and SUN settings, refer to toenailed's post above.
i was working on a cab with toenailed's help (thanks toe!!!), but i still can't get it to work. maybe later i'll figure it out when i'm not too busy. :wink:
I can send using Pixer4 on the Orange network. Not sure about receiving yet.
My Pixer4 settings:
Wap Gateway IP Address:
192.168.224.10
MMS URL:
http://mms.orange.co.uk
Service:
Orange MMS
works perfectly on sending MMS message (Etisalat) Operator & 1.5 WM but recieving is not working even when retrieve option is ticked, but that could be because of the workarounds am doing with MMS composer, am trying to replace the pop3 account in my inbox with MMS composer but no success so far :shock:
How abaut EzWAP MMS
i'm not try it yet but i thought it work.... :roll:
Re: After sending--- device Hang
mariolouis said:
muhelen said:
Hi, after I send the MMS using Pixer, the device just freeze. Any help? I'm using manual configuration for DiGi Malaysia.
Click to expand...
Click to collapse
it takes time for it to send. just wait for it. it will seem it hanged but in fact it isn't. it takes time on "authenticated-ok" but after a while, it goes on smoothly.
Click to expand...
Click to collapse
mariolouis, thanks for the explanation. It's really take time to send. Infact, I'm waiting more than 10 minutes, but still the same!
try this MMS Composser
this two cab must instaled
Re: try this MMS Composser
mwilmar said:
this two cab must instaled
Click to expand...
Click to collapse
Are these files the same ones with WM2003SE(Arcsoft?)? Or is the MMS Composer also Pixer?
Re: try this MMS Composser
jenellej said:
mwilmar said:
this two cab must instaled
Click to expand...
Click to collapse
Are these files the same ones with WM2003SE(Arcsoft?)? Or is the MMS Composer also Pixer?
Click to expand...
Click to collapse
Arcsoft MMS Composer 1.6
I've read a lot on the o2online.de page. but i cant find the settings menu in wm6. sms and mms are using one menu-point, not like in wm5 2 different accounts in messaging menu. i hope someone can help me how to setup mms configuration that i can download/receive and send mms messages. my girlfriend tried to send me a mms, but there comes a hint that mms are saved in incoming (posteingang) till setup mms correctly. and i also had an error that i am in roaming and can't receive messages from there. but my internet is working perfectly, also the email accounts, msn and so on.
hope somebody can help me.
thx in advance
greet
Hello i have had some issues sending out MMS... I checked the settings and they are correct verified on the T-Mobile sites.. I also checked out this site and found a .cab file to fix it but its not working.. can anybody help me out here please..
n8izzle said:
Hello i have had some issues sending out MMS... I checked the settings and they are correct verified on the T-Mobile sites.. I also checked out this site and found a .cab file to fix it but its not working.. can anybody help me out here please..
Click to expand...
Click to collapse
I am on T-Mobile, have used a half dozen different ROMS and have no problems with my MMS.
Your TMobile Data needs to be set on epc.tmobile.com
Then go to the SMS tab, all messages, menu MMS Options. Go to TMobile MMS Server, the server address needs to be as follows: http://mms.msg.eng.t-mobile.com/mms/wapenc
Then select Connect via: T-Mobile Data
I have yet to have a problem sending a MMS using this.
try this one.
had tons of problems too, with custom roms. this cab fixed all of them. install after the auto sim configuration sets to tmobile. credit goes to the ChrisGrundy, maker of the timor tmobile 6.5 rom. also sets send recieve limits to 1000k, per current tmo limits.
(hopefully this isnt the same cab you already tried...)
edit:seems to only work with standard messaging program, previous post worked for me with manilla messaging app, but have to manually increase send/recieve size limit.
Thank you for that but im still not able to download a message or send.. it says that the notification is going to remain in the inbox... I guess i might have to switch roms which really sucks.. i really liked this one lol
n8izzle said:
Thank you for that but im still not able to download a message or send.. it says that the notification is going to remain in the inbox... I guess i might have to switch roms which really sucks.. i really liked this one lol
Click to expand...
Click to collapse
The fix posted by benttwig (which I made myself) is supposed to be run after the HTC connection setup wizzard. Also, it's meant for use in the USA T-Mobile network.
Do those conditions apply to you?
I just now tried to run the fix after the connection setup wizard and it still does not work. I am sure im doing it correctly but its just not working for me.. I too have T-Mobile but I may be doing something wrong...
*** Well i just re flashed the rom and now the MMS is working.. Thank you for your help
MDANavymom said:
Then go to the SMS tab, all messages, menu MMS Options. Go to TMobile MMS Server, the server address needs to be as follows: http://mms.msg.eng.t-mobile.com/mms/wapenc
Click to expand...
Click to collapse
did this and now it works, thanks
Good day all
when I was using old rom 1.48 (WWE) my hd2 was able to send and receive MMS but now after I had upgraded my device to the new rom 1.66 (WWE), I cant send any MMS.
when I send MMS, the device connects to the MMS server and its keep connected forever without sending the MMS
any idea guys about this problem ?
me too
loney_frsu said:
me too
Click to expand...
Click to collapse
it could be rom problem but we need to confirm this..
anyone else has same problem ?
use search on forum
only solution is to erase operator config reset
create config/update config problem solved
str0g said:
use search on forum
only solution is to erase operator config reset
create config/update config problem solved
Click to expand...
Click to collapse
I already erased the operator setting and make them again manually and still it does not work
AbdullahT said:
Good day all
when I was using old rom 1.48 (WWE) my hd2 was able to send and receive MMS but now after I had upgraded my device to the new rom 1.66 (WWE), I cant send any MMS.
when I send MMS, the device connects to the MMS server and its keep connected forever without sending the MMS
any idea guys about this problem ?
Click to expand...
Click to collapse
WIFI isn't on is it ??
I don't think it works properly over WIFI
I flashed my O2 version with the new rom... ran through the set-up and all seems to be working fine (once I realised setup was hidden behind sense!!!)
I had this problem too, I went to Wireless settings and Data Connection, selected UK and then my service provider and it set my MMS/mobile web up. I wasn't able to use mobile web either which explained why weather and other functions were not working.
waynepyrah said:
WIFI isn't on is it ??
I don't think it works properly over WIFI
I flashed my O2 version with the new rom... ran through the set-up and all seems to be working fine (once I realised setup was hidden behind sense!!!)
Click to expand...
Click to collapse
no, the wifi is not turned on.
this problem is a little bit weird because it does not show any error messege when the mms is not sent, its just keep connected to the mms server without sending the mms it self.
abdullaht said:
no, the wifi is not turned on.
This problem is a little bit weird because it does not show any error messege when the mms is not sent, its just keep connected to the mms server without sending the mms it self.
Click to expand...
Click to collapse
hard reset <<<<
MrMagicMushroom said:
I had this problem too, I went to Wireless settings and Data Connection, selected UK and then my service provider and it set my MMS/mobile web up. I wasn't able to use mobile web either which explained why weather and other functions were not working.
Click to expand...
Click to collapse
Thanks
problem solved.
what I had done is running the connection setup wizard again. the connection setup wizard updates all existing connections including mms connection after that I had tried to send mms and the mms was sent .