Hi Guys!
I am unable to connect to my office vpn using my Htc touch HD. (Windows mobile 6.1) I have been able to configure my VPN by giving IP, Username and Password but not able to connect.i Get the error VPN server problems. verify your username and password is correct. If problem continues restart the device.
I have checked all the information and it is correct..still the problem remains. Anything that i might be doing wrong ?
I have configured Vodafone connect services on my phone for gprs/edge. i have no modems configured to my work network? Should i configure it same as vodafone and then try? It doesnt even work even on wifi..
Please suggest what should i be doing?
My office has a cyberoam UTM installed..do i need to enter any additional settings in it even if it works great with my laptop.
P.S. I am able to connect thru my computer with same settings but not thru HD.
Related
I work in IT and often need to conect to customer sites to resolve issues.
Many of our custoemrs allow me to have VPN access in.
This works a dream from XP PRO.
However I thought I would try and access 2 customers via VPN over WIFI from my MDA PRO which I have just upgraded to the latest T-mobile UK ROM.
I created my 2 connections both use PPTP.
I then tried to connect one of them , holding the stylus over the connection I wanted and selecting connect.
Nothing seems to happen.
Rebooted
tried again the same.
Disabled WIFI and tried over the usb connection and activesysnc, nothing.
How do you know when you are connected.
I removed the password info and tried to connect again.
Exepecting to be prompted for password.
nothing appears on the screen.
no error messages, I would expect to see conenction failed, or a disconnect option once you connect.
Am I missing something.???
I dont think your missing a thing, ive tried it before and never got it working through any connection method. bag of pap as they say
VPN only seems to work over t-mobile 3g not wifi
I can conenct via 3g but not wifi
Seems to be a device limitation
Update
I understand from T Mobile UK this is a problem that their UK partners cannot fix so they have passed it onto T Mobile in Germany who will raise it with their suppliers.
There is no promise of a fix or any idea of timescale
This works fine for me:
1.Set up VPN Connection in connection settings for th server you wish to use
2. - most important - in the advanced tab relating to above under Exceptions you need to enter the IP address of the computer you are trying to connect to
3. Go to Terminal services in Programs and enter the IP address of the cf the computer yo wish to connect to - and press Connect
Hopefully that may work for you
johntheo
What am I missing? Where can you obtain the updated rom from? I cannot find it on the T-Mobile site.
Gareth
Can anyone connect to VPN (PPTP) using WM5 via wireless or GPRS?? When i use my old XDAIIi or II, i can connect by now using WM5 i cannot.
Hope those can connect please share. tks.
I can connect to a Windows 2000 PPTP VPN via wireless -- make sure that in Settings/Network Cards/Network Adapters, your network card is set to connect to the Work network.
Also, in Settings/Connections/Advanced/Select Networks, make sure that the lower droplist (private network) is configured to use the Work network.
Aside from those two items, I can't think of any other gotchas.
Ya still doesn't work......
do you know what the vpn device is that you are trying to connect to?
windows servers tend to be quite reliable. there are known issues with some checkpoint and cisco devices.
Hello,
I am having the same problem! I cant connect via VPN (PPTP) to my Windows Server 2003 RAS setup. It works perfectly fine on my laptop over the internet but when I try to connect using my Cinguar 8125 I get a generic "Invalid username/password' kind of error message. I have tried several differnt things, but I was wondering if there are security settings that are turned off or something like that? I actually have my RAS policy to let any device establish a VPN connection (obviously as long as it is authenticated) so I dont know what to do next... any suggestions??
RickoT said:
Hello,
I am having the same problem! I cant connect via VPN (PPTP) to my Windows Server 2003 RAS setup. It works perfectly fine on my laptop over the internet but when I try to connect using my Cinguar 8125 I get a generic "Invalid username/password' kind of error message. I have tried several differnt things, but I was wondering if there are security settings that are turned off or something like that? I actually have my RAS policy to let any device establish a VPN connection (obviously as long as it is authenticated) so I dont know what to do next... any suggestions??
Click to expand...
Click to collapse
For me works fine. I have only 2 connections:
a) my isp, with gprs configuration for vodafone
b) my work network, with the vpn connection definition (ip address, user, passw and domain)
I have it set up the same way and I still get the password issue... what kind of policies do you have in RAS?
RickoT said:
I have it set up the same way and I still get the password issue... what kind of policies do you have in RAS?
Click to expand...
Click to collapse
did you uncheck the security in the connection with the server?
take care with the name user, times exchange get crazy: server/user or only user name for the user field...
Public IP
afterlife said:
Can anyone connect to VPN (PPTP) using WM5 via wireless or GPRS?? When i use my old XDAIIi or II, i can connect by now using WM5 i cannot.
Hope those can connect please share. tks.
Click to expand...
Click to collapse
Hi! I am not an Network expert at all, but here in Norway with one teleoperator we have to use a special access point name on My Work Network connection to get a public IP-address so Network accepts the connection. Perhaps nothing to do with your problem, but also we experience a lot of PDA users having no problem with pre-WM5 devices and much problems with WM5 devices and VPN
Hello:
I have an XDA with WifI, whcih I can connect fine to my wireless network.
I can ping my server from the XDA, all works fine.
I cannot connect to any network shares on the server. I have tried the built in windows explorer and Total commander also, both have the same issue.
I type in the IP address fo the server and the share in question
e.g. \\192.168.0.1\MyShare - the connection keep timing out
I have also tried the server WINS name as well, (\\server\MyShare) I get the same problem.
I suspect it is an authentication thing - no permission, however, I never get asked for a username / password, so cannot type them in.
Anyone got any ideas about how to fix this?
Thanks
Hey folks! I need some help setting up VPN. Here's what I want to do: I want to be able to connect to my PC through Internet (HSDPA Connection. NOT Wireless LAN!!!!!) and access the network shares on my PC. Okay, now I believe the only way not involving a HTTP Server on my PC would be to set up a VPN network. What I have done so far is configuring Vista. I set up the VPN Server. I think almost nothing can go wrong, because the only setting that I'm prompted for is Username/PW to allow... ANyway so I did this, and a friend of mine managed to connect. So I think the Vista-Part is okay. Now when I try to do it with my mobile, I FAIL. I did setup the VPN Connection in the Connections menu, and then I find the connection in the list and I tap-and-hold it and choose connect, and then it SEEMS the phone is trying to connect, at least it establishes the HSDPA Connection if it's not ready. But nothing more happens. No errors, no warnings, no indicators, nothing. Resco Explorer can't see my PC and my PC doesn't show an active VPN Connection either. I've already tried to alter the settings of the VPN Connection on my mobile and I think I've had them in almost every possible constellation but it simply won't work. Can someone help me and explain how to do it please? Your efforts would be very much appreciated!
Nobody? I really need this
Hi!
I have been trying to connect to my to vpn pptp server (witopia.net) for 2 days. I tried every combination that i could think, but there must be something i am doing wrong. I think the mobile is trying to connect to the vpn server through gsm because everytime i try to connect the gsm signal bars disappear for a few moments. How can i make sure that the vpn connection goes through wifi?
I have managed to actually connect to the vpn server, but i cannot access websites like facebook and youtube from the Leo (I live in China and they are blocked). I am able to access blocked services through my iphone and laptop through the same vpn connection.
Any suggestions?
Thanks
PPTP on WM6 is a major problem. Especially if the server (and most do) required MPPE. Its one of the few niggles I have about WM. If you own the server your best setting up the conection using L2TP/IPSEC.
Or if you dont own the VPN server, and have a server laying around the house (as I do) you could set up your server to use the PPTP VPN then set there server as a Proxy, and connect WM6 to the server via proxy...so basically WM6>Proxy>VPN>interwebs
Hi Jagnet, Thank you for your reply.
Unfortunately i am not able to use Ipsec/L2TP in China, only PPTP works fine with blocked sites.
After trying many combinations, there is a step that i havent been able to figure it out.
Once i am in Start > Settings > Connections (tab) > Connections (icon) > Advanced (tab) > Select Networks, How do i select the WIFI connection in "Programs that automatically connect to the internet should connect using" opcion? . On the modem tab i only can choose "celullar line", "Celullar line (GPRS)" or "Hayes Compatible on COM1:", there is nothing about WIFI there, so when i try to connect at the vpn server specified in "Programs that automatically connect to a private network should connect using", the phone seems to be trying to connect via GPRS.
¿Any ideas?
Thanks
joaquinmora said:
Hi!
I have been trying to connect to my to vpn pptp server (witopia.net) for 2 days. I tried every combination that i could think, but there must be something i am doing wrong. I think the mobile is trying to connect to the vpn server through gsm because everytime i try to connect the gsm signal bars disappear for a few moments. How can i make sure that the vpn connection goes through wifi?
I have managed to actually connect to the vpn server, but i cannot access websites like facebook and youtube from the Leo (I live in China and they are blocked). I am able to access blocked services through my iphone and laptop through the same vpn connection.
Any suggestions?
Thanks
Click to expand...
Click to collapse
having similar issues with HD2. CMCC as well, in China.
I am getting a proxy IP address if I check on ipchicken.com, etc
but I am not able to open FB.
I am not using the PPTP option, but using their SSL service with
openVPN. but STILL not working..
right now on support chats with witopia.
VPN PPTP is simply broken in WM. It will work, but only with no encryption at all, which beats the purpose.
First of all sorry for bumping this old thread. But I have been looking and it seems kinda close to what I`m doing, oh a little new to vpn.
I have managed to sucessfully connect the HD2 via VPN in connections only when on the lan (outwith I need to contact O2 to get it enabled apparently). I setup a dialup connection in Win 7; HD2 says I`m connected to the VPN.
However heres the thing. Am I right in thinking that folders by default have to be shared. Therefore when using resco I can see network folders anyway, when connected to wifi.
So how would I prove that I can see folders shared to the VPN and not on the LAN as I cant seem to prove whether I`m seeing the folder via LAN and not on the VPN?
Sorry if its confusing but perhaps you get my drift? Or am I missing the point entirely....