Yesterday was installing the drivers for the Redfly viewer on my XDA Mini. When the drivers had finished installing, the device soft reset and wouldn't get past the O2 splash screen. I've been browsing the web for possible solutions but haven't found a definiative answer. Can anybody give me some advice to possible fix my XDA?
Alex
This will erase all data and restore your phone to factory default settings.
Hard reset sequence: Press VoiceDial button + Comm Manager button + soft reset.
nah, it hasn't done anything still stuck on O2 splash screen. Thanks anyway
-MyHTC- said:
This will erase all data and restore your phone to factory default settings.
Hard reset sequence: Press VoiceDial button + Comm Manager button + soft reset.
Click to expand...
Click to collapse
Fixed it, then you need to keep holding down the two buttons while pushing the d-pad, then when prompted pushing the talk button
Related
I have installed a program that the device din't like, now it doen't boot anymore, I only see the start up screen.
How can I start over and delite what is on, if I can not start up?
The hard reset is not working, any ideas?
Soft reset or Hard reset.
You try this for HR : "Hold the comm manager buton and the voice command button at the same time.
While holding these push the soft reset button. Keep your fingers on the Comm and voice Manager buton. After about five seconds a screen will appear asking you to press the green send button.
That's it."
See there : http://forum.xda-developers.com/viewtopic.php?p=182354
Have you installed SPB Pocket Plus ? :wink:
hard reset dind't work, but I put it in usb mode and installed new rom, that worked..
Hello all,
I install aku2 and all ok, i install resco explorer and keyboard pro but when i reboot le 9100 it's appears a withe screen and the 9100 was freezed. i want to do a hard reset but the 9100 only do a soft reset and freeze in a withe screen. thx for all for help
Have you tried the following steps for a hard reset?
# Press and hold both the Comm Mannager Button and the Voice Command Button
# While keeping those two buttons pressed, press the Reset Button with your stylus
# After about a second you will be prompted for confirmation. Press the Talk Button to confirm
This should hard reset your phone. Let us know how you get on.
try to keep and hold comm manager button, voice command button and power button together
yes y tried the hard reset but nothing:
hold comm mannager and voice command and reset button.
go to the wizard mod forum and find out how to do the USB boot and reflash your device
thats my suggestion
try without reset button but keep and hold comm, voice and power on button in my phone work in this way
Hi all,
I try to install HTC Home screen and I install .NET Compact Framework v2.0 and it required to reboot, and when it come to reboot it stops on windows mobile screen, doesent boot..
what should I do? any good ideas?
thank you
beetleman said:
Hi all,
I try to install HTC Home screen and I install .NET Compact Framework v2.0 and it required to reboot, and when it come to reboot it stops on windows mobile screen, doesent boot..
what should I do? any good ideas?
thank you
Click to expand...
Click to collapse
Hard reset
How can I do that?
beetleman said:
How can I do that?
Click to expand...
Click to collapse
First,try to do a 'SOFT REST' (Push and hold down Camera button and push the Power On button) and see if it works out,if it doesn't,then do the 'HARD RESET'
To perform a Hard Reset:-
1. Press and hold the Comm Manager button and Voice Comm button on the device.
2.Keep the two(above mentioned) buttons pressed,and at the same time,use the stylus to lightly press and hold the RESET button.
The phone will reboot,and on reboot will ask for confirmation,press the 'Send' button,which is usually used when answering/calling.It'll do the Hard Reset.
But mind it,you'll lose all your personal data,like contacts,settings and messages,which of course,you can again put in.
Hi,
I am puzzled by the fact that I cannot hard reset my device at all via the hardware buttons. I can hard reset via clear storage, but cannot hard reset by holding explorer and gps button + soft reset button. This just doesn't work for me. The device does nothing. Any suggestions?
Thanks for your help.
fried_potatoes said:
Hi,
I am puzzled by the fact that I cannot hard reset my device at all via the hardware buttons. I can hard reset via clear storage, but cannot hard reset by holding explorer and gps button + soft reset button. This just doesn't work for me. The device does nothing. Any suggestions?
Thanks for your help.
Click to expand...
Click to collapse
Strange, with my device it´s the other way around. Can HR via buttons but not via clear storage. If someone has an solution for one or even better the both of us....don´t hesitate.
Hold the stylus pressed in that hole.
Press the two magic buttons.
Remove the stylus but keep the buttons pressed until you see the "welcome screen".
OK now?
Figured it out
Bloody HTC...trinity can HR with device off. Was use to that. With Polaris, it is required to have device on!
So Thanks Dimitri,
You order is correct. Just that the device must be turned on and booted into WM6 OS.
With regards to Clear Storage. Not sure how I can help. Could it be your ROM? I've only Clear Storaged with two ROMS. Bepe and the original manufacturer's ROM (Taiwainese Version). Had to reflash to Bepe to get English. Maybe try a different ROM?
GOOD DAY I HAVE AN HTC BLACKSTON AND HAVE A STRANGE PROBLEM WHEN I FINISH A PHONE CALL THE PHONE FREEZ AND REFUSE TO WORK. AFTER EACH CALL I HAVE TO DO A SOFT RESET CAN YOU HELP PLZ WITH THIS PROBLEM 10XXXXXX
abiis said:
GOOD DAY I HAVE AN HTC BLACKSTON AND HAVE A STRANGE PROBLEM WHEN I FINISH A PHONE CALL THE PHONE FREEZ AND REFUSE TO WORK. AFTER EACH CALL I HAVE TO DO A SOFT RESET CAN YOU HELP PLZ WITH THIS PROBLEM 10XXXXXX
Click to expand...
Click to collapse
Could you provide us with the following info:
Which rom are you currently using?
Have you recently flashed a new rom? Problem may be with this rom in particular
What is your current SPL?
When did this first start happening?
Have you recently installed any apps?
Have you recently changed any registry settings/tweaks?
This may help us narrow down your issue
Ta
Rick
Fallen Spartan said:
Could you provide us with the following info:
Which rom are you currently using?
Have you recently flashed a new rom? Problem may be with this rom in particular
What is your current SPL?
When did this first start happening?
Have you recently installed any apps?
Have you recently changed any registry settings/tweaks?
This may help us narrow down your issue
Ta
Rick
Click to expand...
Click to collapse
good day
* i am using original rom 1.14.421.5 (25590) wwe
*no didnt flash any rom
*IT HAPPENS WITH ME SINCE 2 WEEK
*YES GPS SOFTWARES BUT AFTER the problem
*ONLY THE REGISTARY OF CAM TO SHOW THE EXTRAS AND NETFRAME FROM 3.5 TO 3.7 ALL THIS IS SINC TWO DAYS
NB= MY PROGRAM MEMORY IS USING 45% OF THE CPU IS THAT NORMAL WHEN I DO SOFT RESET IT RETURN TO 37%
thanks
any ideas plz
Hi there abiis,
You can try resetting your phone back to factory settings by performing a Hard Reset. Try to uninstall any programs that you may have recently installed first that may be causing a conflict. You can backup any data on your phone (such as Contacts, Messages, etc) using PIMBackup before you perform a Hard Reset.
To perform a Hard Reset, try the following:
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.
3. Release the VOLUME UP and VOLUME DOWN buttons, press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
Mastoid said:
Hi there abiis,
You can try resetting your phone back to factory settings by performing a Hard Reset. Try to uninstall any programs that you may have recently installed first that may be causing a conflict. You can backup any data on your phone (such as Contacts, Messages, etc) using PIMBackup before you perform a Hard Reset.
To perform a Hard Reset, try the following:
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.
3. Release the VOLUME UP and VOLUME DOWN buttons, press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
Click to expand...
Click to collapse
i know this option but i need a solution without having a hard reset thanks any way
can't you just backup before hardreset ?
To be honest, I think a Hard Reset would resolve your problem with the dropped calls... but if you are unwilling to perform a hard reset, then I would suggest that you try sending your phone back to HTC for repair assuming it is still under warranty?
Best Regards.
well this depends greatly
which end call button is he using. if it the red software one then its a software problem, and this would be remedied with a had reset
if its the one on the bottom of the phone with the 4 button (start call, home, back and end call) then this could indicate a hardware issue and in that case i recommend a return to vendor