Related
I had a JasJar and before it PDA2k and with both I could not mount network shares on my local home network. I write the address in file explorer in the format \\10.0.0.23\share where the share share does not even have a password and is share to everybody and the phone can not recognize the share.
It does see other devices on the local netword for example it can browse the Internet and access my routers web based admin but not the share.
Other computers on my home network can access the share.\
I heard there are programs that help in doing this, but is there no direct or free way to do this?
Try using Resco File Explorer in which you will be able to map shared network folders and then you can access them from File Explorer directly, it even support possword protected shared items.
Im using the standard file explorer, it works fine. I start by typing \\P4 which eventually shows my shares, and then I can navigate as I want.
Cheers
Nasdaq
still can not connect to share
Nasdaq, which version of windows do do you have the share on. Are there any special settings?
It gives me "network path was not found" always then "Network resource can not be found or you do not have the permission to access the network".
The share has no password, on windows it just logs me in without any further input.
I am using the openpath in the file explorer.
May be you need to check once again about IP Addresses and Default Gateway settings, which is not allowing you to connect with your LAN.
--Universal can't connect to Windows Server 2003--
Cant map to a Windows 2003 Server share? Is it also a Domain Controller? Check the server for
start / programs / administraton tools / Domain Controller Security Policy
Then check Local Policies / Security Options :
Microsoft Network Server: Digitally sign communications (always)
change to disabled
that will stop your universal from accessing a share normal windows machines can access.,.
Access shares problem is on Windows XP
This problem is on WindowsXP share not on windows server.
Also the imate can access the Internet and even the administration of the router, so I gues it has full TCP/IP abililty.
Are there any workgroup settings that I need to do?
Sorry for not getting back earlier, my share is on an XP sp1 box.
What I would REALLY like to do is browse my Exec over wifi from my PC. :?
Cheers
Nasdaq
Anyone got any other advice on this one?
Can't access my network shares with //192.168.0.1/ etc either?
Thanks
M.
I can't access shares by using the IP, I have to use the name of the machine: \\azhad instead of \\10.168.2.158
Azhad
Hi Guys,
what is this sharing stuff u r talking about?
Please excuse me for this newbee question but i want to know about what sort of sharing etc can i do with my Exec and Laptop, like exploring files on laptop from Exec or other way around?
My laptop has Windows XP sp2 and i use wireless router to share my broadband
many thnx......
Jatt
Try this up
I had the same problem accessing network shares on my Universal...
I was also typing IP address in Resco Explorer and it was not working.
But I could make it work using the computer name. I have no idea why it work whil with basic ip address it couldn't, but at least I am able to browse my computer folder and play video files.
So try using "\\computername\share" to see if it's working.
forrest.
I tried
I tried doing that, using the computer name. It takes more time to tell me that it can not access the server.
I think that to resolve the name of the computer it needs a wins server, is that correct?
Could it also be in your network settings if you set your network as internet or connects to work?
to Jatt
Jatt theoretically you should be able to create a network share on any computer on your network and be able to access it on your phone. This is really handy since you would not need to activesync to exchange files.
But note that for JasJar/Exec or any WM5 device you can not sync over the network just share files.
To ehabh
Thanks for trying to help me out but can u tell me how do i create a network share on my computer? please
Thanks again
Same problem
I've got the same problem. I can connect to the internet through my router but for the life of me I can't connect to the shared on my PC (XP SP2). I know it's not a problem with my EXEC because I can connect to my PC at work. I can see my PC in the device list but not connect to it.
The first time I tried to connect using Resco Explorer 05 I managed to ge the screen asking for log-on details, but never got any further as it said my passwork was incorrect. Since then I've never managed to get the log-on screen back only an error say the network resource was unavailable.
I've ran the XP network set-up wizard more times than I can count, changed my PC settings manually but still had no luck. Has no one figured out what we're doing wrong?
I didn't really understand the machine name issue as I don't have any WINS or DNS server at home... But for me it worked...
Anyway you should try to temporarily disable your personnal firewall (On the computer you're trying to access) just to see if it is not blocking network traffic for the windows sharing.
If it is the problem, then you have to configure your firwall to stop blocking this traffic...
Sorry, but it's all I know...
Forrest.
Hi forum,
I have a WiFi Connection in my office premisis & was womdering if I could create a VPN or a similar p2p connection between my laptop & my universal...
Any comments or ideas..
Thanx,
mOrph
yes you can
but not an activesync connection.
you basically have to get on the WIFI network (VPN not necessary unless you are external of the network and/or behind firewalls).
then its a question of what you want to do, the WIFI network gets you on to it using WEP or WPA SPK I think (we use WEP at home and work).
if you want to connect to your laptop, create a mapped drive then you can copy and paste backwards and forwards.
you can run terminal server to control your PC or connnect to a terminal server, or connect to SBS with administrator priverlidges.
The question is, if you connected, what do you want to do. You cannot activesync, but you might like to try streaming music or other bandwidth consuming activities...
ok
got your PM.
Question: If you created the connection using WIFI between your laptop and your PDA, what do you want to do/achieve?
PS morphosin
Please please please stop using "help guys" as your heading. Refer here: http://forum.xda-developers.com/viewtopic.php?t=4534
Particularly point 2.
This is at the beginning of every forum topic.
Hi
Answer:
Hi Simon... The reason i was wanting to connect my laptop & my ppc through Wifi is that i cannot activesync (like you already know).
I was thinking maybe i can have a data trasfer between the devices if nothing else.
Is that possible?
If not, what can the connection be used for?
Thanx buddy,
mOrph
Activesync cannt be done over WIFI, 2003 allowed it not WM2005.
You can share a folder on your PC, and thus place files in and out of that using WIFI. Generally though, I found it more efficient to use an SD card with a USB memory reader to transfer files, much quicker read/write. Usually I want to put pictures or videos back the other way anyway. some pc's and laptops come with memory card readers anyway.
ON your PC' find a folder, right mouse click and share it with a share name. Make sure you know the name of the machine, eg my computers name is TLA-DELL1 for work, and home is the name of my daughter. If you havent named your machine it will have some dodgy obscure pathetic name issued by the manufacturer. You can get this from system in control panel.
On your PDA, start your WIFI.
Using Resco explorer hopefully you have it, map a net work drive. You can try the standard file explorer, but I dont like it. Total commander can also do it. In the share address use:
\\computername\foldersharename
note the double backslash.
Enter usernames and passwords as appropriate.
Now, the pain in the arse bit.... do you have a firewall? This is where it can get tricky.
The other thing you can do is if you are running XP Pro (if not, I recommend it), you can also go into control panel > system on the tab called remote connection, you can tick a box that allows you to take control and use your machine on your PDA using Terminal Server. This allows you to access all the resources and facilities that your machine has as if you were sitting at the console, including the power and processing speed of your computer.
Only downside, the screen is much much smaller than your computer, so getting around it can be painful.
Once you have enabled your machine to allow the connection, its simply a matter of starting wifi, programs > terminal services, and enter the IP address or computer name of your laptop to connect to it, and it should open then a log on name for you to start using your machine.
A further feature, which I dont use and cannot advise how to, but read about it here, is to "stream" mp3's from your laptop to your PDA so you can play music on your PDA based upon music on your machine rather than having to copy it.
In relation to sending files to your computer, if all else fails, I ahve two extra email accounts on my PDA a hotmail account, a POP3 account, and if in times of need, a GMAIL account, all of which allow me to email particular files anywhere I want using any WIFI connection. I use this when all else fails.....
Hence my question, what did you want it for....
Dont worry mate, we'll get there... one day. We just have to challenge MS, and what is life without a challenge or 100 from MS.
Hi!
Sorry if this question has already been answered, i could not find a solution to my problem.
I want to access the data on my WM6 Device from another PC in the same network. I know that there are no networkshares available in WM6. But there has to be a possibility to access my data on PPC from a PC over Wifi. I know that i could do it vice versa, but i want to access my whole device via network. does anybody know a solution? Maybe with the help of a ftp software on my device? Thanks in advance!
Push.
No ideas??
Yeah, I was looking for exactly this, but found nothing.
I would also like to know if it is possible to create Shares.
ok, i found a solution.
use a ftp-server program on your ppc and you can access your whole device on an pc in the same network. i use the freeware "Mocha ftp server" for this. you can deny anonymous access and create useraccounts with password for secure and protected access.
hope this helps some people
Hi,
Is it possible for my WM6.1 device to join my LAN Workgroup such that I can view the files on my PPC from my desktop computer and drag and drop files over to the PPC via WIFI? Kind of like using the PPC as a NAS device?
Thanks in advance
Rob
Yes and No
To my knowledge no. i believe that microsoft stopped allowing that feature within active sync quite awhile ago, but what i have managed to do is to create a computer to computer network (ad-hoc) where my PDA was the access point and my laptop could then connect to that.
I could transfer files using explorer on my phone to access my network drives on the laptop, then copy and paste from there, but i could not find my phone on the laptop due to it not having shared folders to my knowledge.
The things i would like to achieve is shared internet over wifi by using the phone as an access point and to figure out how to access files on phone on the laptop. Not the other way round.
When i created this computer to computer network i thought that if i had 3G connected it would automatically pick up the connection on the laptop but i was wrong.
Which means i am no expert on the matter, but im sure there is a way
the same rules goes for pda's on the same net as for other computers
if they got the correct rights to access shared dirs
it can access them and map them if one use programs like total commander
and know a bit about network in generals not really that user friendly i guess
It can be done, I use a program called WMFTP. Google it.
Yea i get some of it
Rudegar said:
the same rules goes for pda's on the same net as for other computers
if they got the correct rights to access shared dirs
it can access them and map them if one use programs like total commander
and know a bit about network in generals not really that user friendly i guess
Click to expand...
Click to collapse
Some of it i get but others bits i dont. Like is it possible to set sharing rights to directory's on the phone? If that is possible great.
Also how do you find out the device name or would you have to use the ip address for mapping those directory's?
I have a touch diamond and would love to map the internal storage on my network, but have failed at that.
Still not figured how to share the internet connection of the phone over wifi either
hi
Probably some newbie questions, please don't mind if they seem silly but i`m stuck
I wanna to connect my polaris to company network via wifi in order to transfer some files. At least it could be bluetooth
But HOW?
Internet connection works fine but i still cant see others computers
How to establish connection with other computers or (the best) with whole company network and then copy some files
any other way to easy wireless transferring files from pda to pc?
hey
no kidding
nobody transfer / share some files pc - pda?
Can VPN work
Can you setup a connection to a VPN network?
But that means your company network would need a VPN server.
Just talk to the people who log-in company network remotely, they would have an idea how this works.
bizzdev netuse
hey i found this program after years of searching....it says it won't work right with windows 6.1, but it is working great in my Touch Diamond US version. just click on options and then start adding your shared folders on your server. type "//servername/sharedfoldername"
ok
i have found another solution
in Total commander in catalog \\Plugins\Lan you can map some discs in network. Its not so easy to enter the right name/path but after some time its possible. Works fine. Problem that you dont see mapped disc in tree.......
Other problem that you still dont see pda on pc..
tnkk80 said:
hey i found this program after years of searching....it says it won't work right with windows 6.1, but it is working great in my Touch Diamond US version. just click on options and then start adding your shared folders on your server. type "//servername/sharedfoldername"
Click to expand...
Click to collapse
Thnx
its sounds interesting...
does it works wit TC? (does total commander see mapped drivers in tree?)
Its automatic -you map disc only once?