Can the HTC Raph Headset work as PC headphones? - Touch Pro, Fuze Accessories

Is there an adaptor available that allows me to use my HTC headphones on my PC?
It would be nice to carry only one set. Thanks!

You could try buying the RC-E100 remote (using it myself works great), the HTC miniUSB connector is not really common, the 3.5mm jack in the RC-E100 remote is.

Related

mini USB adapter to minijack

I drive a prius with an AUX adapter (accepts a minjack) does anyone know of a cable that is a mini USB to mini jack?
Thanks!
you need a male USB to female 3.5mm adapter. Often, they come as male USB to both female 3.5mm and female USB. Many, many sites have them. Search for "USB audio splitter" or somthing like that.
Once you have one of those, you need a standard male 3.5mm to male 3.5mm headphone cable.
I have never seen a male USB to male 3.5mm cable.
Also, indicating which country you are in when asking where to buy something often helps, this is an international forum
Be aware that not all mini USB accessories work with the Kaiser. Some have the connector pins on the top, some on the bottom. You think that would be universal (thats what the "U" in USB stand for, you know!), but its not. And if you buy an accesory w. the wrong pin layout, it won't work.
I have read this is the case with some headsets, so the adapters may be the same case. Try to buy one that specifically says that it works with the Kaiser (or at least other HTC phones).
evilc said:
you need a male USB to female 3.5mm adapter. Often, they come as male USB to both female 3.5mm and female USB. Many, many sites have them. Search for "USB audio splitter" or somthing like that.
Once you have one of those, you need a standard male 3.5mm to male 3.5mm headphone cable.
I have never seen a male USB to male 3.5mm cable.
Also, indicating which country you are in when asking where to buy something often helps, this is an international forum
Click to expand...
Click to collapse
Sorry...I'm in the US.
Hey Griffin911, from one Prius driver to another.
Try http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=776
Then you will just need a male to male 3.5 mm adapter which you should be able to find at any Radio Shack. I am using this Seidio adapter with a set of Shure earbuds with my Kaiser and it works fine.
I haven't tried it on the Pruis's aux port yet, I travel through the week and haven't had as much time to play with it as I'd like. I'll do it when I get home Friday and post to this thread to let you know how it works.
I have paired the phone with the car via Bluetooth and transferred contacts fine (although transferring contacts is one at a time) and calls work fine as well.
I tried the Seidio adapter with the M to M 3.5 mm to the Aux jack on the Prius and it worked fine. I also ran the Odyssey nav software while playing MP3's through TCPMP and that worked fine. Only problem was the volume on the nav software was too loud when TCPMP was at the right volume, the volume controls don't work independently.
Didn't especially care for the Odyssey software (running the 14 day trial right now) the one route I mapped gave me a really weird route. I'll try the rest of the weekend and see how it works, but it's also not extremely intuituve from what I've seen so far.
redpoint73 said:
Be aware that not all mini USB accessories work with the Kaiser. Some have the connector pins on the top, some on the bottom. You think that would be universal (thats what the "U" in USB stand for, you know!), but its not. And if you buy an accesory w. the wrong pin layout, it won't work.
I have read this is the case with some headsets, so the adapters may be the same case. Try to buy one that specifically says that it works with the Kaiser (or at least other HTC phones).
Click to expand...
Click to collapse
It's not universal because ExtUSB is a proprietary extension to the USB standard.
Anything involving analog audio is NOT covered by the USB standard.

Mini USB to RCA?

Hello all, I want to plug my Tilt into my factory Volkswagen radio as an auxilary audio input. I already have the volkswagen factory harness that accepts a white and red RCA pair. I know i could go to mini usb >>>> 3.5mm stereo>>rca OR does anyone make a mini usb strraight to RCA?
cheers
Praygo said:
Hello all, I want to plug my Tilt into my factory Volkswagen radio as an auxilary audio input. I already have the volkswagen factory harness that accepts a white and red RCA pair. I know i could go to mini usb >>>> 3.5mm stereo>>rca OR does anyone make a mini usb strraight to RCA?
cheers
Click to expand...
Click to collapse
Olympus makes one for the 780 which comes with a mini-USB-to-RCA video/audio cable. If it is the right one, check a camera shop.
The port on our Kaisers are called mini usb right?
no and yes the sync and charge part is called mini usb
but htc's own connector which also carry audio is called extUsb
look at www.expansys.com for a converter even if all you can get is
an extusb to 3.5minijack then a minijack to rca is pretty easy to get
Or you could get a SonyEricsson MBR-100. It will connect via bluetooth to your Kaiser for audio out and comes with RCA leads as well as giving a 3.5mm output for use with headphones.
tkalli said:
Olympus makes one for the 780 which comes with a mini-USB-to-RCA video/audio cable. If it is the right one, check a camera shop.
Click to expand...
Click to collapse
Analog audio output on a USB connector is NOT a defined part of the USB specification. As a result implementations of it are manufacturer specific.
95%+ chance the Olympus adapter will not work with HTC devices.
The best bet is likely a ExtUSB-3.5mm + 3.5mm-to-RCA adapter.
Edit: Or an A2DP (Bluetooth stereo) to RCA adapter.
Im just going to go this route: ExtUSB-3.5mm + 3.5mm-to-RCA adapter.
thanks for everyones input!
http://roccstar.com/catalog/Mini-USB-to-Male-RCA-Cable-p-910
my search led me to this. if it fits the razr, it should fit a kaiser!
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280098254181
The more i got to thinking, the more i wanted one. so i went on eBay and found one. In a few days i should have a new cable, and i shall tell you how wonderful it is!
douglastheduke said:
http://roccstar.com/catalog/Mini-USB-to-Male-RCA-Cable-p-910
my search led me to this. if it fits the razr, it should fit a kaiser!
Click to expand...
Click to collapse
Yep, it will fit. But it won't work.
Entropy512 said:
Analog audio output on a USB connector is NOT a defined part of the USB specification. As a result implementations of it are manufacturer specific.
The best bet is likely a ExtUSB-3.5mm + 3.5mm-to-RCA adapter.
Click to expand...
Click to collapse
I had a RAZR adapter lying around and tried it with my Kaiser. No go. Had to buy an HTC-specific adapter.

3.5mm USB Adapter - No Sound From Headphones

I recently picked up a set of earbuds and a 3.5mm adapter for my Tilt and have not been able to get the sound to play through the headphones... Is this a radio version issue? I'm a bit new to all this. I flashed my phone to the most recent ROM from HTC, installed the keyboard fix and that's about it. Any help would be appreciated.
Thanks!
JM
try flashing another radio...this is usually the culprit with no sounds...
I had this problem. When I plugged in the headphones, sound still came out of the phone speaker. It turned out one of the pins in the usb port was bent. If you get sound from the speaker with them plugged in, that could be your problem.
from my understandings...
There are 2 types of mini usb 3.5 mm headphone jacks. one that pulls form the top row on the mini usb port and one that pulls from the bottom row on the mini usb port. One works with the tilt, the other will not. More than likely you got the one that will not work with the tilt.
dtmcnamara said:
from my understandings...
There are 2 types of mini usb 3.5 mm headphone jacks. one that pulls form the top row on the mini usb port and one that pulls from the bottom row on the mini usb port. One works with the tilt, the other will not. More than likely you got the one that will not work with the tilt.
Click to expand...
Click to collapse
The sound comes through the external speaker just fine, I also tried ALL the radios and nothing helped. There are no bent contacts so I guess it is probably that I got the adapter that will not work with the tilt. Does anyone know of a specific manufacturer that makes one that does work with the tilt? I picked this one up off ebay for about .50 cents, no idea who makes it.
I had one adapter with gold plated on the 3.5mm headphone side, the connection to USB was bad. I had to hold it down for it to work properly. I have since bought another one (with L shape USB connector), it works perfectly. Either you need to juggle it to see if it's a connector issue or you simply got the wrong type of adapter.
What kind of adapter is it?
I bought a "OEM" adapter from a website selling Tilt accessories, and it works fine. However, when I picked up a Motorola headphone kit with a USB adapter, it did not work, and the sound would only come out of the speaker.
The Moto compatible adapters do not work. HTC specific adapters are fine. They are also available in 2.5mm if you want to use a cell headset with it instead of bluetooth.
The Kaiser requires an 11 pin usb adapter......I believe the Razr uses a 7 pin? if im correct. That is why you dont have sound....
A cheaper way, ie: FREE! is to make one yourself out of the cheap pair that came with the kaiser!
see this: http://www.tracyandmatt.co.uk/blogs/index.php/2006/08/18/orange_spv_m3100_headphone_adapter_hack
its for the TyTN 1, but it still works for the Kaiser, its also very fun and great to show off to people
I use a mini-USB adaptor (3.5 mm) from Boxwave and it works great with my Shure SE 110 earphones! The adaptor was around $12.00.
Internal Microphone
When I plug my heaphones in, it seems that the internal microphone (on the phone) is disabled.
Is it possible to hear the sound through the headphones and talk through the phone?
I hate having to unplug the headphones every time someone calls me.

How to connect 3.5mm headphones

Does anyone know of a adapter or device that will adapt my headphones for use with the USB mini?
how 'bout this noob ^?
So I saw the adapter in the store banner right after posting this. Anyone use the Javo? How is the sound quality on a good pair of phones?
http://store.mobilitytoday.com/content/accessories/73-75--2373.htm
Any hope that this amp would work USB with windows mobile? Or am I stuck hooking it up with mini jacks.
Thank you for the above response.
http://www.headphone.com/products/headphone-amps/the-mobile-line/headroom-total-bithead.php
If you're super cheap, use the adaptor that came with your Touch in conjunction with this 2.5mm to 3.5mm adaptor. Very cheap, free shipping, and great website!
http://www.dealextreme.com/details.dx/sku.733

USB Port for Sound and Answer/End Call?

Hiya,
You'll all probably know that on the TouchPro, the HTC mini-USB jack allows headphones to be connected (via adaptor), as well as a 'remote' which answers/ends calls...
...which is excellent, because I was able to develop my own wired connection to my CK-7W car kit.
I would like to do the same for my SEX1, particularly given the unreliable nature of the bluetooth.
Q: Is the mini-USB port configurable to give audio-out, and potentially answer/end calls?
Kind regards,
Oms.
Oms said:
Hiya,
You'll all probably know that on the TouchPro, the HTC mini-USB jack allows headphones to be connected (via adaptor), as well as a 'remote' which answers/ends calls...
...which is excellent, because I was able to develop my own wired connection to my CK-7W car kit.
I would like to do the same for my SEX1, particularly given the unreliable nature of the bluetooth.
Q: Is the mini-USB port configurable to give audio-out, and potentially answer/end calls?
Kind regards,
Oms.
Click to expand...
Click to collapse
It should be, you can get usb headphones, with a talkbutton, that use a standard mini usb fitting.
the audio for the X1 goes to the 3.5mm jack? There is an answer button on the supplied cable.
I thought the USB port was only for USB and power - am I wrong?
I'm not sure most HTC phone have audio out by USB and Mobile fun has
HTC Multifunction Audio Cable YC A200
HTC TyTN/MDA Vario II 3-in-1 USB Adapter
HTC Multifunction Audio Cable YC A300
in the X1 area,
but can't find anything on the net saying it will work
I really want it to work so i only need to plug one cable in when its in the car phone and audio.
I would love to know if some one has tried them.
I'll let you knoe if i get one
I tried it with my Moto L7 USB headset. Nothing happens.
Sorry
I wish it would work too...
htc devices use the extUSB connector and use the extre pins not in normal miniUSB for these features
pins the normal miniUSB connecter the x1 uses don't have so it can't be don
x1 don't support usbHost so the miniUSb connector only have 2 functions
being connected to an usbHost like a computer
and charging no other functionality is possible for a device which
don't support usbHost
Hi Oms,
I've just came across your post about the wired connection you made from Touch Pro to ck-7w. I would like to make a similar setup for my Touch Diamond2. Could you please post your findings on this matter and connections details?

Categories

Resources