I drive a prius with an AUX adapter (accepts a minjack) does anyone know of a cable that is a mini USB to mini jack?
Thanks!
you need a male USB to female 3.5mm adapter. Often, they come as male USB to both female 3.5mm and female USB. Many, many sites have them. Search for "USB audio splitter" or somthing like that.
Once you have one of those, you need a standard male 3.5mm to male 3.5mm headphone cable.
I have never seen a male USB to male 3.5mm cable.
Also, indicating which country you are in when asking where to buy something often helps, this is an international forum
Be aware that not all mini USB accessories work with the Kaiser. Some have the connector pins on the top, some on the bottom. You think that would be universal (thats what the "U" in USB stand for, you know!), but its not. And if you buy an accesory w. the wrong pin layout, it won't work.
I have read this is the case with some headsets, so the adapters may be the same case. Try to buy one that specifically says that it works with the Kaiser (or at least other HTC phones).
evilc said:
you need a male USB to female 3.5mm adapter. Often, they come as male USB to both female 3.5mm and female USB. Many, many sites have them. Search for "USB audio splitter" or somthing like that.
Once you have one of those, you need a standard male 3.5mm to male 3.5mm headphone cable.
I have never seen a male USB to male 3.5mm cable.
Also, indicating which country you are in when asking where to buy something often helps, this is an international forum
Click to expand...
Click to collapse
Sorry...I'm in the US.
Hey Griffin911, from one Prius driver to another.
Try http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=776
Then you will just need a male to male 3.5 mm adapter which you should be able to find at any Radio Shack. I am using this Seidio adapter with a set of Shure earbuds with my Kaiser and it works fine.
I haven't tried it on the Pruis's aux port yet, I travel through the week and haven't had as much time to play with it as I'd like. I'll do it when I get home Friday and post to this thread to let you know how it works.
I have paired the phone with the car via Bluetooth and transferred contacts fine (although transferring contacts is one at a time) and calls work fine as well.
I tried the Seidio adapter with the M to M 3.5 mm to the Aux jack on the Prius and it worked fine. I also ran the Odyssey nav software while playing MP3's through TCPMP and that worked fine. Only problem was the volume on the nav software was too loud when TCPMP was at the right volume, the volume controls don't work independently.
Didn't especially care for the Odyssey software (running the 14 day trial right now) the one route I mapped gave me a really weird route. I'll try the rest of the weekend and see how it works, but it's also not extremely intuituve from what I've seen so far.
redpoint73 said:
Be aware that not all mini USB accessories work with the Kaiser. Some have the connector pins on the top, some on the bottom. You think that would be universal (thats what the "U" in USB stand for, you know!), but its not. And if you buy an accesory w. the wrong pin layout, it won't work.
I have read this is the case with some headsets, so the adapters may be the same case. Try to buy one that specifically says that it works with the Kaiser (or at least other HTC phones).
Click to expand...
Click to collapse
It's not universal because ExtUSB is a proprietary extension to the USB standard.
Anything involving analog audio is NOT covered by the USB standard.
Related
I have a a USB mini extension lead, so I'm trying to plug in a 3-to-1 adapter to it. So male USB mini, the a-symetrical type (flat one side) to a female USB mini, the symetrical type (wings on both sides). Obviously this doesn't fit!
So is there a USB Mini (female a-symetrical) to USB mini (male symetrical) adapter?
Or could someone at least tell me their proper names so I can google it?
What are you trying to achieve? If it is to increase the cable length between the 3in1 and the Kaiser, I think you would need an ExtUSB patch lead with all 11 pins wired to retain the functionality of the 3in1. I don't know if these leads even exist.
The Asymetrical female socket, like the one on the base of the Kaiser, is double sided on the internal plastic "island" and has 5 contacts on one side and 6 contacts on the other.
The power and data are on the top 5 connectors.
The audio in/out & talk/end are on the bottom 6 connectors.
This is known as ExtUSB and is peculiar to HTC devices.
The Symetrical plug/socket is standard mini USB and will only ever have power and data connections. The mini USB plug only connects to the top 5 connectors in an ExtUSB socket.
Ouch, my dreams of the perfect in-car system dashed! Thanks wizzard that's really explained it very well.
The objective is to have a nice looking car install with only one wire leading to the Kaiser, and the 3-in-one hidden. So ideally:
Power \/
Audio > 3-in-one >> USB extension >> Kaiser
Hands free /\
It was hard enough finding the mini USB extension, so as you say an ExtUSB extension lead may not even exist
I purchased this adaptor for less than £10 from ebay. It ticks all the boxes for me and is the most discrete adaptor I could find. The 3in1 adaptors like this one dont come with a mic so wont work as a hands free without additional adaptors.
My intention is to have the plug fixed to a Brodit mount. The cable is no thicker than headphone cable. This 90cm cable will route to behind the steering wheel on the cowling. The adaptor is flat and low profile with the answer/hang up button on the top. Easily pressed through the steering wheel spokes. The audio 3.5mm and mini USB leads plug in at right angles to each other but will easily route out of site, behind the dash to USB car charger and 3.5mm MP3 In socket on the head unit.
It all works as expected, and even at Motorway speeds callers can hear me clearly. Voice Command works fine, TomTom and Media Player sound great. My only problem is alternator whine when charging, which I think is just an earthing problem. When I get it all properly finished I will post some photos.
After work, wife, kids etc. have finished with me.
Thanks Wizzard. Not a bad solution, and the best so far without the existence of an ExtUSB extension lead.
My only problem with it is that (I assume) it forces the kaiser into handfree mode even when all I was to do is charge and listen to music from the 3.5mm connection.
Again, I am assuming here, but I thought the second adapter you cite would only initiate hands free when I plug in the hands free into its port. I could be wrong on that one though.
Perhaps my issue is a small price to pay for 8gbs of music in the car
foaf said:
I thought the second adapter you cite would only initiate hands free when I plug in the hands free into its port.
Click to expand...
Click to collapse
I dont have the bulky 3in1 to test, sorry. For me when listening to music and TomTom the audio mutes when I take a call and then resumes seamlessly on hang up without needing to physically touch the Kaiser. I only need to touch the Kaiser to press the Voice Command key once to launch programs and initiate calls.
wizzzard said:
I purchased this adaptor for less than £10 from ebay. It ticks all the boxes for me and is the most discrete adaptor I could find. The 3in1 adaptors like this one dont come with a mic so wont work as a hands free without additional adaptors.
My intention is to have the plug fixed to a Brodit mount. The cable is no thicker than headphone cable. This 90cm cable will route to behind the steering wheel on the cowling. The adaptor is flat and low profile with the answer/hang up button on the top. Easily pressed through the steering wheel spokes. The audio 3.5mm and mini USB leads plug in at right angles to each other but will easily route out of site, behind the dash to USB car charger and 3.5mm MP3 In socket on the head unit.
It all works as expected, and even at Motorway speeds callers can hear me clearly. Voice Command works fine, TomTom and Media Player sound great. My only problem is alternator whine when charging, which I think is just an earthing problem. When I get it all properly finished I will post some photos.
After work, wife, kids etc. have finished with me.
Click to expand...
Click to collapse
Hi!
Unfortunately the link to the item you have is broken...
I'm trying exactly what you wanna do, I bought this extension.
Is this the same of you?
It works, but I have annoying noise on audio when it's connected to the USB power jacket.
How to fix this?
Thanks a lot.
Hello all, I want to plug my Tilt into my factory Volkswagen radio as an auxilary audio input. I already have the volkswagen factory harness that accepts a white and red RCA pair. I know i could go to mini usb >>>> 3.5mm stereo>>rca OR does anyone make a mini usb strraight to RCA?
cheers
Praygo said:
Hello all, I want to plug my Tilt into my factory Volkswagen radio as an auxilary audio input. I already have the volkswagen factory harness that accepts a white and red RCA pair. I know i could go to mini usb >>>> 3.5mm stereo>>rca OR does anyone make a mini usb strraight to RCA?
cheers
Click to expand...
Click to collapse
Olympus makes one for the 780 which comes with a mini-USB-to-RCA video/audio cable. If it is the right one, check a camera shop.
The port on our Kaisers are called mini usb right?
no and yes the sync and charge part is called mini usb
but htc's own connector which also carry audio is called extUsb
look at www.expansys.com for a converter even if all you can get is
an extusb to 3.5minijack then a minijack to rca is pretty easy to get
Or you could get a SonyEricsson MBR-100. It will connect via bluetooth to your Kaiser for audio out and comes with RCA leads as well as giving a 3.5mm output for use with headphones.
tkalli said:
Olympus makes one for the 780 which comes with a mini-USB-to-RCA video/audio cable. If it is the right one, check a camera shop.
Click to expand...
Click to collapse
Analog audio output on a USB connector is NOT a defined part of the USB specification. As a result implementations of it are manufacturer specific.
95%+ chance the Olympus adapter will not work with HTC devices.
The best bet is likely a ExtUSB-3.5mm + 3.5mm-to-RCA adapter.
Edit: Or an A2DP (Bluetooth stereo) to RCA adapter.
Im just going to go this route: ExtUSB-3.5mm + 3.5mm-to-RCA adapter.
thanks for everyones input!
http://roccstar.com/catalog/Mini-USB-to-Male-RCA-Cable-p-910
my search led me to this. if it fits the razr, it should fit a kaiser!
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280098254181
The more i got to thinking, the more i wanted one. so i went on eBay and found one. In a few days i should have a new cable, and i shall tell you how wonderful it is!
douglastheduke said:
http://roccstar.com/catalog/Mini-USB-to-Male-RCA-Cable-p-910
my search led me to this. if it fits the razr, it should fit a kaiser!
Click to expand...
Click to collapse
Yep, it will fit. But it won't work.
Entropy512 said:
Analog audio output on a USB connector is NOT a defined part of the USB specification. As a result implementations of it are manufacturer specific.
The best bet is likely a ExtUSB-3.5mm + 3.5mm-to-RCA adapter.
Click to expand...
Click to collapse
I had a RAZR adapter lying around and tried it with my Kaiser. No go. Had to buy an HTC-specific adapter.
I recently picked up a set of earbuds and a 3.5mm adapter for my Tilt and have not been able to get the sound to play through the headphones... Is this a radio version issue? I'm a bit new to all this. I flashed my phone to the most recent ROM from HTC, installed the keyboard fix and that's about it. Any help would be appreciated.
Thanks!
JM
try flashing another radio...this is usually the culprit with no sounds...
I had this problem. When I plugged in the headphones, sound still came out of the phone speaker. It turned out one of the pins in the usb port was bent. If you get sound from the speaker with them plugged in, that could be your problem.
from my understandings...
There are 2 types of mini usb 3.5 mm headphone jacks. one that pulls form the top row on the mini usb port and one that pulls from the bottom row on the mini usb port. One works with the tilt, the other will not. More than likely you got the one that will not work with the tilt.
dtmcnamara said:
from my understandings...
There are 2 types of mini usb 3.5 mm headphone jacks. one that pulls form the top row on the mini usb port and one that pulls from the bottom row on the mini usb port. One works with the tilt, the other will not. More than likely you got the one that will not work with the tilt.
Click to expand...
Click to collapse
The sound comes through the external speaker just fine, I also tried ALL the radios and nothing helped. There are no bent contacts so I guess it is probably that I got the adapter that will not work with the tilt. Does anyone know of a specific manufacturer that makes one that does work with the tilt? I picked this one up off ebay for about .50 cents, no idea who makes it.
I had one adapter with gold plated on the 3.5mm headphone side, the connection to USB was bad. I had to hold it down for it to work properly. I have since bought another one (with L shape USB connector), it works perfectly. Either you need to juggle it to see if it's a connector issue or you simply got the wrong type of adapter.
What kind of adapter is it?
I bought a "OEM" adapter from a website selling Tilt accessories, and it works fine. However, when I picked up a Motorola headphone kit with a USB adapter, it did not work, and the sound would only come out of the speaker.
The Moto compatible adapters do not work. HTC specific adapters are fine. They are also available in 2.5mm if you want to use a cell headset with it instead of bluetooth.
The Kaiser requires an 11 pin usb adapter......I believe the Razr uses a 7 pin? if im correct. That is why you dont have sound....
A cheaper way, ie: FREE! is to make one yourself out of the cheap pair that came with the kaiser!
see this: http://www.tracyandmatt.co.uk/blogs/index.php/2006/08/18/orange_spv_m3100_headphone_adapter_hack
its for the TyTN 1, but it still works for the Kaiser, its also very fun and great to show off to people
I use a mini-USB adaptor (3.5 mm) from Boxwave and it works great with my Shure SE 110 earphones! The adaptor was around $12.00.
Internal Microphone
When I plug my heaphones in, it seems that the internal microphone (on the phone) is disabled.
Is it possible to hear the sound through the headphones and talk through the phone?
I hate having to unplug the headphones every time someone calls me.
That I can buy, that will plug into my auxiliary jack in on my Saturn Vue, so I can listen to music on the go?
Thanks
Wouldn't this be a better question for a Saturn forum? Good luck!
The auxillary jack is a 3.5mm headphone jack. Nothing abnormal.
So you're asking for a Kaiser USB -> 3.5" female adapter? 2-in-1 USB adapter (found on amazon) fills that need and you can charge at the same time.
You'd just need a male-male 3.5" cable in between the two for audio output. No need for bluetooth unless you want to get fancy, but you'd still need to charge your phone, so might as well use a completely wired solution.
Hope this helps!
Thanks for the suggestion Alex, I already have this, but my problem is that my usb port was messed up , and now I can't use the wired solution. Otherwise I would stick with the wired.
Maybe something here
Mitch, I love you. Thanks, the Sony Ericcson was exactly what I was looking for.
Anyone find a source for USB extension cables for the Touch Pro? I want to run a cable in my car from my touch pro mount to the center counsle where I will have the audio dongle. which will branch off to a charger and line out to my Aux in. Otherwise I have to have the exposed audio adapter and then two cables running out of that instead of the one single extension cable I want to run to the center console. Really hoping I don't have to build my own.
I suspect this will be hard to find, considering it's not just a standard mini USB cable.
I like the idea behind it though. I was thinking about the same type of thing in my car and I'm waiting on getting a couple different docks so I can see if they will fit my needs once I rip them apart.
You need an extUSB extension cable. It should be around $10-$30. Depends on where you get it from. I'm thinking try eBay/expansys-usa/htc store
Kraize said:
You need an extUSB extension cable. It should be around $10-$30. Depends on where you get it from. I'm thinking try eBay/expansys-usa/htc store
Click to expand...
Click to collapse
Been looking at all the normal sources, the problem is I need it to end in the same female plug that is in the Touch Pro (so I can plug the audio dongle into it). Having zero luck finding it.
I have to disappoint you: if you connect both the audio and the charger from your car, you'll get a loud noise because of lack of grounding in car
darfri said:
I have to disappoint you: if you connect both the audio and the charger from your car, you'll get a loud noise because of lack of grounding in car
Click to expand...
Click to collapse
Easily fixable:Ground loop Isolator http://www.crutchfield.com/p_127SNI135/PAC-SNI-1-3-5-Noise-Filter.html?search=ground+loop&tp=2653
fishzine said:
Easily fixable:Ground loop Isolator http://www.crutchfield.com/p_127SNI135/PAC-SNI-1-3-5-Noise-Filter.html?search=ground+loop&tp=2653
Click to expand...
Click to collapse
Does it work?
3in1 11 PIN ExtUSB Earphone Handsfree Adapter for HTC
Finally appeared on eBay what I was looking for a long time!!
I think that is the same that you are looking for!
http://cgi.ebay.com/3in1-11-PIN-Ext...AU_MobilePhoneAccessories&hash=item3cabfd9d0b
Now I will not have a lot of wires apparent in the dashboard of my car!
not yet tested, I just bought!