Is it normal that the wifi connection breaks up when you turn off the screen? this kinda sucks wehen youre using for example windows live. Is there any way to tweak this?
i'd like to know this too its annoying when im using windows live messenger or remote desktop
There is an option on advanced config!
Start advanced config - Menu - More settings - Connections - check "Enable Wi-Fi an standby mode
ebola0 said:
There is an option on advanced config!
Start advanced config - Menu - More settings - Connections - check "Enable Wi-Fi an standby mode
Click to expand...
Click to collapse
Works, thank you!
Related
My old device was htc wizard. There was an option to disable gsm (phone) only. Is there any way to do this in g1? I just want to avoid calls and in the same time to use wifi. Airplane mode doesn't work for me, because it disables wifi too
mony87 said:
My old device was htc wizard. There was an option to disable gsm (phone) only. Is there any way to do this in g1? I just want to avoid calls and in the same time to use wifi. Airplane mode doesn't work for me, because it disables wifi too
Click to expand...
Click to collapse
Not quite the way you are accustomed to it, but there is a 'way' around it... you basically leave the phone on but you can turn on call forwarding... settings > call settings > call forwarding > always.
It doesn't turn the phone off but it won't ring either.
--M
i was wondering the same thing, there might come out with a fix for this in the next update.
demontefixo, i was using the same solution, but I hoped for real solution to disable GSM. Anyway I will just wait
PS: This device is amazing I'm so happy with it. I wasn't using windows on my computer and laptop, and now i am completely MS free
Install anycut and Create a Software to Hidden Application named Phone Info, their you can see the Phone or Radio disable type of option. I have Tried it
It can actuall disable Radio and keep the Wifi on, But i could not renable radio and must have to reboot the phone.
Through the same Phone Info shortcut you can enable it to use WCDMA only or just prefer WCDMA or use GSM only. I think that is what mony87 was looking for.
Or you can go to:
Settings
Mobile networks
Operator selection
If you only see T-Mobile then Search Networks.
Select a non subscribed Network like ATT
It will tell you you your SIM card does not allow a connection...
But if you don't re-select TMobile the Phone Connection will turn off.
To get your Phone Connection back, just select TMobile
hetaldp said:
Install anycut and Create a Software to Hidden Application named Phone Info, their you can see the Phone or Radio disable type of option. I have Tried it
It can actuall disable Radio and keep the Wifi on, But i could not renable radio and must have to reboot the phone.
Click to expand...
Click to collapse
I thought I had the same issue but you actually can re-enable the radio after you turn it off...it just takes a while...
Bring up the dialer, type in: *#*#INFO#*#*. Shouldn't need to hit enter. Scroll all the way down, and hit "Turn off radio".
Gary13579 said:
Bring up the dialer, type in: *#*#INFO#*#*. Shouldn't need to hit enter. Scroll all the way down, and hit "Turn off radio".
Click to expand...
Click to collapse
that's the same as using the "Phone info" shortcut from AnyCut
maxdamage2122 said:
that's the same as using the "Phone info" shortcut from AnyCut
Click to expand...
Click to collapse
Some people don't want AnyCut?
*#*#4636#*#*
Works fine for me.
Tho i do hope a app or a fix for this in any near update
helloo...
Does enybody know any apps that kan change the settings in wifi or make it possilble that wi fi does not turn off when the sreen turns off in htc diamond???
thanks kitha
Search for Diamond Tweaking
Or Advanced Configuration tool (3.3)
kitha said:
helloo...
Does enybody know any apps that kan change the settings in wifi or make it possilble that wi fi does not turn off when the sreen turns off in htc diamond???
thanks kitha
Click to expand...
Click to collapse
This is actually related more to windows than Diamond. Open Settings, then System and Power. Last tab is Wi-Fi. Uncheck "Enable Wi-Fi power-saving mode", comfirm settings and that's it.
jazz198X said:
This is actually related more to windows than Diamond. Open Settings, then System and Power. Last tab is Wi-Fi. Uncheck "Enable Wi-Fi power-saving mode", comfirm settings and that's it.
Click to expand...
Click to collapse
Not on my diamond its not lol
In settings i have to go to all settings, system then power. but when in power the last tab isnt wifi, its Advanced.
In advanced all thats there is settings for the backlight and to turn the device off if not used for X time.
Anyone got an answer to this?
The first 2 responses make no sense to a newbie like me so if anyone can explain it would be appreciated.
Cheers,
John.
Download and copy this .cab file to your diamond, and install it on your phone.
http://www.touchxperience.com/en/advanced-configuration-tool/downloads.html
After install, run the Advanced Config Tool.
Go to Menu -> More Settings -> Connections and Enable Wifi on stanby mode.
I think that will work
thanks
this does the trick
Arda4 said:
Download and copy this .cab file to your diamond, and install it on your phone.
http://www.touchxperience.com/en/advanced-configuration-tool/downloads.html
After install, run the Advanced Config Tool.
Go to Menu -> More Settings -> Connections and Enable Wifi on stanby mode.
I think that will work
Click to expand...
Click to collapse
thanks mate!
i know its a little late but there is a way to fix this with out using Advanced Config Tool,
open the Comm Manager (settings->connections) and in the Comm manager enable your Wi-Fi, then in the bottem right hit Settings->Wireless LAN->Power Mode and slide the slider over to Best Performance, now when the screen goes it from what i can tell it still turns the Wi-Fi off to save power but when u turn the screen back on it reenables the Wi-Fi and trys to connect to the last network it was on, i maybe wrong on it turning it off tho
With every other android phone i had i could force the phone to use 3G only by going to *#*#4636#*# and selecting "WCDMA Only".
I can do the same on the SGS but it does not do anything. it has no effect on the phone.
Anyone has any idea how to do this on the SGS?
Yes..I am looking for the same information..Without this feature..i am screwed.the phone keep going to 2G as long as the signal strength is stronger than 3G..this priority scheme logic suck big time for data centric phone which data speed is more important..
DownlOad anycut, run it,NEW SHORTCUT - ACTIVITY - PHONE INFO
A short cut will now be on your homescreen with all the required options.
*#*#197328640#*#* > debug screen > phone control > network control > band selection
You need to do this after each reboot though as it does not stick.
clubtech said:
*#*#197328640#*#* > debug screen > phone control > network control > band selection
You need to do this after each reboot though as it does not stick.
Click to expand...
Click to collapse
You don't need to type all that *#*#.........#*#* on your I9000, just hold the menu button down(which is the button in the middle of the bottom of the phone) and you will see an icon called service mode and this is the mode after you type all that out.
kevin307 said:
You don't need to type all that *#*#.........#*#* on your I9000, just hold the menu button down(which is the button in the middle of the bottom of the phone) and you will see an icon called service mode and this is the mode after you type all that out.
Click to expand...
Click to collapse
That's only if you've typed all that stuff already in the current session.
The Network app (by Philipp Mangelow) is a bit easier to handle though.
need to say sorry first... i've just found out this as well.
my bad.
I know you can create shortcuts to the main Settings menus (battery use, bluetooth settings, etc.) by just long-pressing the screen -> Shortcuts, but I need to create a shortcut to a submenu (specifically Settings -> Wireless & Networks -> Mobile Networks -> Network Mode)
This is on a Droid 2 Global. Anyone know how I can do this? I have LauncherPro and I know you can make shortcuts with it but programming those shortcuts seems pretty complicated. Also I know you can make additional shortcuts using the LauncherPro "Activities" menu but I can't find the "Network Mode" settings in that list either.
Any ideas?
Anyone got any ideas? I'm guessing the relevant process will be something like "com.android.settings.networkmode" but I'm not sure
I use Quick Settings app to get there honestly... though it's still a few steps. Long Press Search Button > Tap Mobile Data > Tap networks.
I'm not sure of another way..
I'm using the Extended Control app to activate some of the phones functions.....However, I need to be able to quickly toggle Mobile Networks on and off without going through the settings menu. Extended Control has a function to toggle APN, but this doesn't affect the Mobile networks.
Can anyone help me out here please.
Thanks.
fintry said:
I'm using the Extended Control app to activate some of the phones functions.....However, I need to be able to quickly toggle Mobile Networks on and off without going through the settings menu. Extended Control has a function to toggle APN, but this doesn't affect the Mobile networks.
Can anyone help me out here please.
Thanks.
Click to expand...
Click to collapse
What version of Extended controls ary you using. I have v5.03 and i haven no issues with LeeDroid 2.3d. You have 2 options of switching
1 Direct mode
2 Rename APN
Witch one are you using?
Niksie said:
What version of Extended controls ary you using. I have v5.03 and i haven no issues with LeeDroid 2.3d. You have 2 options of switching
1 Direct mode
2 Rename APN
Witch one are you using?
Click to expand...
Click to collapse
I'm using Direct Mode but it doesn't switch on Mobile networks. Can't get my head around the rename APN mode.
try this
you need to first manually set in the settings->wireless and networks, the mobile network flag to on; after that set the mode to apn toggle (check that your apn settings are correct, they might have been modified!)
your extend control will work now to activate/deactivate mobile network
antiares said:
you need to first manually set in the settings->wireless and networks, the mobile network flag to on; after that set the mode to apn toggle (check that your apn settings are correct, they might have been modified!)
your extend control will work now to activate/deactivate mobile network
Click to expand...
Click to collapse
Excellent, got it sorted now. Thanks for your help, much appreciated.