Hey,
I've been trying to figure out if it will work. I have both an HTC Touch (ELF) and have just recently upgraded to the Diamond. I want to connect my ELF to my Diamond via bluetooth so that the ELF can get online. Is this possible?
I've paired the two devices together, set up both to allow for SIM sharing, created the bluetooth connection in the connection manager on the ELF and used *99# as the dial out number. From everything I've found online that should be all, but I can't get it to work.
Any advice would be appreciated, Thanks.
Ynothna
Related
Hi,
I've a SE K610i and a magician.
As I am using my K610i for 3G service, I was trying to pair it with my magician. Apparently, i can paired both of the device. However, when I'm trying to initiate the dialing from my magician, it doesn't seems to connect to the phone to dial it. Basically I would like to use my PDA to surf with 3G speed (pairing with the mobile phone) and make normal calls with my magician. Would that be possible?
Is there any guide on how to do it? and also, is it because the standard magician bluetooth software does not support it?
Thanks & Regards,
i also have the similar problem when i want to connect my o2 mini to my K810i for internet connection. My O2 mini does not connect to the mobile phone via bluetooth. Connect by Infrared is working fine. Transferring files via bluetooth is working fine too.
My setting did not have any problem because it working fine with my treo 750.
Anyone can help me?
Are there really nobody in o2 mini anymore? OK, for the one that still with the mini. I have found the problem. When pairing O2mini bluetooth with any other phone which you want it to act as a data modem, just click 'NO' when u being ask 'will you want to add a serial port". You should able to dail after this.
If you replace the microsoft bluetooth stack with the Blue Soleil one (available on these forums) you get a hell of a lot more functionality with the bluetooth, it also adds the PAN facility. I have successfully connected my magician to my K800i and my C905 and both will suft the net perfectly well. You can do the same with the broadcom bluetooth stack on your home pc.
Is there a way to enable BT DUN on the Mogul? I tried the WM6_DUN hack posted in the other forum but it didn't work. Did Sprint strip it completely from the OS?
caxiem said:
Is there a way to enable BT DUN on the Mogul? I tried the WM6_DUN hack posted in the other forum but it didn't work. Did Sprint strip it completely from the OS?
Click to expand...
Click to collapse
Bluetooth DUN has been replaced with Internet Sharing. You havent seen easy teathering until you have used Internet sharing...it is a breeze.
Pair the Mogul to your laptop via Bluetooth. (this varies based on which BT stack you are using, MS, WC, Toshiba, etc) The software you use should support PAN (Personal Area Network) Once paired, you enable Internet Sharing on the Mogul and then connect the laptop to the Mogul as a BT Network Access Point and you are done.
I have tethered both my laptop and my HTC Tytn to the Mogul. Works great.
Brad
Thanks. I already got ICS to work with my laptop that's using BlueSoleil. I'm trying to connect my Nokia 770. It only supports DUN that I know of.
Internet Connection Sharing
Hi,
I read Brad's post on connecting your Tytn to Mogul.
I have Telus version of Mogul, they do not have internet sharing on device.
I did try PDAnet connecting to P3600 and the Mogul could not see a serial port profile on P3600.
My goal is to connect a HTC X7501 to HTC P4000. I have had no success.
Since I need to buy X7501 to test, I have tried using the HTC 3600.
If the device would have internet sharing vs wModem, would that increase my chances of using the P4000 as modem for HTC X7501 Advantage.
If Brad sees this thread, would appreciate a reply.
Thank You
Dave
caxiem said:
Thanks. I already got ICS to work with my laptop that's using BlueSoleil. I'm trying to connect my Nokia 770. It only supports DUN that I know of.
Click to expand...
Click to collapse
See this thread for a solution:
WM5 DUN Bluetooth N800
http://www.internettablettalk.com/forums/showthread.php?t=4211
Search for "tomtom" in the Hermes forum, there is a WM6 CAB file that enables DUN on the Mogul, works like a charm with the 770 and N800.
Hello all, I have upgraded to Sharps 4.0 but the bluetooth in teh car still does not work. Carkit finds the phone and calls to connect, however there is no answer from the phone to give the code.
Can any body help. This did not work with original WM5 from T-Mobile and still does not work wit WM6
Thanks in advance for the answer to solve this problem
I have a similar problem with my TyTN and Pioneer DEH-P75BT, and i found this post...
http://forum.xda-developers.com/showthread.php?t=290871&highlight=P75BT
With this changes in registry, my TyTN connect with headunit tottaly correct.
Has anyone got to work any external Bluetooth modem with any of BA WM6 ROMs?
I am trying to use Nokia N95 as modem from my Qtek 9090 upgraded to latest WM6 ROM from xplode. Even though pairing and initial modem setup goes OK, all further attempts to use modem fail. From N95 I don't even see that BA is trying to establish Bluetooth connection to Dial-Up Networking service. I have MS Bluetooth stack, one that comes with original ROM from xplode.
Any help is very appreciated. Thanks.
In theory there should be no problem - after pairing you have list of services from your cell phone and you should be able to use DialUp (and number *99# or *99***x#, where x is connection CID number, if finally Nokia found out what is CID) or Bluetooth PAN, if n95 has fuction similar to Internet Sharing, like WM6.
I used this method successfully with nokia 6230i, SE k750i and k810i (the first one worked fine even in ppc2003, but ir required a bit of fight).
I have been successful in using my SX66 as modem for my laptop.
My N95 is perfectly working with laptops too. It actually also worked with some Asus PPC. I also know how to setup external modems in WM6 and how they should theoretically work. But I could not make any phone working with BA/WM6.
In the original post I asked whether or not has anyone succeeded to make their BlueAngel PDA working with "phone as Bluetooth modem"?
If answer is YES, please tell me how you did that and also specify the ROM version.
Folks,
I'm new.
I have a t-mobile HD2 without a voice/data plan whatsoever. I would like to connect it via bluetooth to my blackberry and use its data plan to connect to internet. In other words - simply - I want to tether HD2 with BlackBerry via DUN.
... but
The problem is HD2 does not connect to blackberry's BT DUN - it wants PAN and BB does not offer it and i could not find any way to enable/add it on BB side. In fact, HD2 says it could not find _any_ bluetooth services it is interested in.
I have done this exact thing with my jasjar running a cooked wm6.1 and it worked by selecting a bluetooth in the modem list.
HD2 does not have this option and in bluetooth settings i can see that it only offers an incoming bluetooth serial port (COM1) but not an outgoing one.
I am open to flashing another ROM instead of the stock t-mobile.
Please help and thanks in advance.
anyone ? please help !
heelp.
no one? come on, folks. help.
I also want this topic to move higher. Searching for the solution also.
It was no problem with Qtek 2020i with some patch. But HD2 can't find DUN on other devices. Sad truth. Maybe some registry hack from other WIDCOMM based devices with DUN client enabled'll help?
Some solution...
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BTC1]
"Index"=dword:00000001
"Prefix"="BTC"
"Order"=dword:00000001
"DeviceArrayIndex"=dword:00000001
"Dll"="btcedrivers.dll"
"FriendlyName"="Bluetooth Port 1:"
[HKEY_LOCAL_MACHINE\Drivers\RegisteredDevice\BTC_BTC1]
"Flags"=dword:00000000
"Index"=dword:00000001
"Dll"="btcedrivers.dll"
"Prefix"="BTC"
[HKEY_LOCAL_MACHINE\ExtModems\BtDialupModem]
"DeviceType"=dword:00000001
"Port"="BTC1:"
"FriendlyName"="Bluetooth Dialup Modem"
Please help !
I need it.
Also desperately searching this too.
Desperately because I have no other possible solution.
This time it my car that provide the internet connection via BT DUN.
And of course no chance to get any kind of update/upgrade of the car bluetooth support.