anyone know where i can get another original screen protector that came in the box? i liked how u couldnt even tell it was on there, and how it was made of a hard, almost, thin glass, type of plastic. Unlike most of the other screen protectors that are thick and bendy.
any ideas? or anywhere that sells ones VERY VERY similar to the original?
thanks!
I've been thinking the same thing, hopefully one of the many guru's here will have an answer!
Me three! Surely someone sells the OEM one. Post, people! Tell us who!
I know the OP asked about the OEM screen protector, but i've been using these on all my portable devices and they are quite literally the best screen protectors i have ever used. When applied correctly there is zero distortion and the screen looks exactly as it is without the protector.
http://www.overlayplus.com/US/dis_product.asp?model=HTC_ProTouch&modeln=Touch%20Pro&prod_type=screen
Its a bit on the pricey side but last night my fuze slipped outta my hand, did a nice midair tumble and slid screen-down across the edge of my desk leg, it only got a slight scratch that i buffed out with plastic polish
I'll be happy to snap some pics if you guys are interested.
I will update that a friend of mine who also owns a Fuze called HTC to ask them if he could purchase another OEM screen protector and the customer service person he spoke with told him they do not sell them separately but that he should check daydeal.com if he wanted the OEM screen protector. So, he took that to mean the ones daydeal.com has for sale for the Fuze are the same ones HTC supplies with the phone.
I cannot confirm this as the one he ordered has not arrived yet but I will try to remember to post here when I hear from him on these.
What about InvisibleShield? Anyone using that one?
http://www.zagg.com/support/whatis.php
These have worked out well for me. The anti-glare ones work very well.
http://www.boxwave.com/products/easyfinder/buy-best-at_t-fuze-accessories_3350.htm
I had the invisibleshield one but found that it was too grippy and it wasn't as clear as i hoped it would be. I've got 2 pictures here, you can see the optical clarity in the 2nd picture by comparing the reflection of the cologne bottle in the screen with the actual bottle. The screen protector covers both the screen as well as the buttons.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I found that my invisible shield one has a bit of a orange peel finish on it which i didn't like too much. This one is actually smoother than the screen naked.
mark72501 said:
I will update that a friend of mine who also owns a Fuze called HTC to ask them if he could purchase another OEM screen protector and the customer service person he spoke with told him they do not sell them separately but that he should check daydeal.com if he wanted the OEM screen protector. So, he took that to mean the ones daydeal.com has for sale for the Fuze are the same ones HTC supplies with the phone.
I cannot confirm this as the one he ordered has not arrived yet but I will try to remember to post here when I hear from him on these.
Click to expand...
Click to collapse
Update: He received the screen protectors he ordered from daydeal.com and by the looks of them, they are essentially the same as supplied with the Fuze from the factory. He and I both looked at it and it looks and feels the same. If you like the OEM one, I suggest ordering from daydeal.com if you need a replacement. And no, I'm not affiliated with them. Just passing along the info.
mark72501 said:
Update: He received the screen protectors he ordered from daydeal.com and by the looks of them, they are essentially the same as supplied with the Fuze from the factory. He and I both looked at it and it looks and feels the same. If you like the OEM one, I suggest ordering from daydeal.com if you need a replacement. And no, I'm not affiliated with them. Just passing along the info.
Click to expand...
Click to collapse
I just ordered one of these and will post the results one I get them.
i second the boxwave one. its friggin clear and easy to put on
http://www.boxwave.com/products/cle...h-crystal-screen-protector-at_t-fuze_3350.htm
however, shipping is hella slow
but really nice product
i got the 3 pack and screwed up the first one but totally worth it
I ordered these from daydeal and would NOT state that they are 1:1 compared to the shipped one. HOWEVER, love it. It's a slightly different material (kinda anti glare but the "blur" is fully acceptable for me) and I had some concerns reg. finger friendliness but that's not the case. Stylus operation is easy (by far not so rubbery as the invisible shield). Form, fit and applying was very easy (much easier than the stock one). I bet Martin Shield is the best but I still think money well spent. On top, not so prone to fingerprints as the shipped protector.
good or better than OEM protector
I concur that this screen protector from DayDeal is as good as or better than (in my opinion) the original OEM protector that came with my Fuze.
http://www.daydeal.com/product.php?productid=34547
I ordered only one last week, but I may order a few more just to have them on the ready.
Related
i just wanna know if you guys use protective plastic sheets on your screen or not? Is it really necessary? will the screen become scratched and ugly if we use the stylus directly on it? thanks for any opinion.
It's recommended to use screen protectors to avoid micro-scratches. I've got Brando UltraClear since I've bought my TyTn and it took 2 days for me to realize there's a protector on screen It's perfect, doesn't affect quality of display at all. Also it's easy to remove and washable
excuse my ignorance, but what is that u are using, since I cant fint anything useful and interesting in my country? thanks
i recommend using the screen protector as well. it's not just for protecting the screen from any scratches with the use of stylus but the screen will always be protected from any other close contacts while you keep the device in your pocket or in a case. the display is one of the most expensive parts of your hermes and you will regret not protecting it when a time comes for you to replace it for any serious scratches.
WriteShield and Martin Fields are very good too. Of course you could read this thread http://forum.xda-developers.com/showthread.php?t=273926
I first used the Brando Ultra Clear - wich is really very clear, friends asked me why I do not use a screen protection until I told them to have a (much) closer look!
Brando Ultra Clear is available on ebay cheaper as in the brando shop.
When I bought my car holder I wanted to have a screen protector that is more anti-reflective. This is why I now use a 3M ARMR200.
The ARMR200 is really great, cause it's the only screen protector wich is two times coated and almost non-reflective.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I bought it on ebay where you get it right cutted for the Hermes. I don't know if it's also available in other countries on ebay. If you don't have a problem to buy it on german ebay search for "ARMR200 trion" cause the Hermes is sold here as "O2 Xda trion" for example. You'll find many results. E.g. this one
Thanks guys. I am using a standard one, which is not very clear and also gets dirty and fingerprinted very easy. I will check the availability of what u suggested in my ****ty country.
JavoEdge has been great for me. The have an Ultra Clear and a anti-Glare. I use the anti-glare because it hides all the fingure prints and you can view your screen better out side in sunlight.
By the way you can take the screen protector off and wash it with water and put it back on good as new, i tried this and it actually worked.
These screen protectors are hard not soft and flimsy which also make it easier to put on without bubbles.
Here is the link for the anti-glare versions that i like - http://www.javoedge.com/reflexeshop/productCatalog/getProduct.do?poid=985&pbmId=4737
sn00x said:
I first used the Brando Ultra Clear - wich is really very clear, friends asked me why I do not use a screen protection until I told them to have a (much) closer look!
Brando Ultra Clear is available on ebay cheaper as in the brando shop.
When I bought my car holder I wanted to have a screen protector that is more anti-reflective. This is why I now use a 3M ARMR200.
The ARMR200 is really great, cause it's the only screen protector wich is two times coated and almost non-reflective.
I bought it on ebay where you get it right cutted for the Hermes. I don't know if it's also available in other countries on ebay. If you don't have a problem to buy it on german ebay search for "ARMR200 trion" cause the Hermes is sold here as "O2 Xda trion" for example. You'll find many results. E.g. this one
Click to expand...
Click to collapse
If you want to test it:
Goto http://www.display-schutzfolien.de/vikuiti/mmm-3m/index.php?language=en
and use the Code VIKUITI-XDA-DEVELOPERS.com until December 31.
This Vikuiti shop offers worldwide shipping and has many sizes in offer.
The code gives you a 20% discount on the product.
K.-U. Schenke
3M http://www.vikuiti.de/
I saw couple posts asking for these hard cover snap on covers. Hope this helps.
http://www.talkietech.com/at89tiac.html
CLear - http://www.talkietech.com/attih89hapls2.html
Black - http://www.talkietech.com/attih89hapls5.html
Pink - http://www.talkietech.com/attih89hapls1.html
There are more colors but 2 lazy to list them.
I just ordered one of these a few days ago should have it any day.
$13 and change shipped
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
3rd party vendor on Amazon is selling these for $10 shipped. See items 84 to 90.
http://www.amazon.com/s/ref=sr_pg_4...k:8925,i:wireless-accessories,n:301188&page=4
If anyone gets one of these, could they please review it? I really like how small the Tilt is and i'm curious to find out if using one of these cases makes it feel bulky or if it's still small enough to fit comfortably in jeans front pocket...
Thanks...
i think you can't open the keyboard with those case à 5$.
but with this one it's possible : http://www.amazon.com/AT-8925-Activ..._69?ie=UTF8&s=wireless&qid=1197051150&sr=1-69
_Alex_ said:
If anyone gets one of these, could they please review it? I really like how small the Tilt is and i'm curious to find out if using one of these cases makes it feel bulky or if it's still small enough to fit comfortably in jeans front pocket...
Thanks...
Click to expand...
Click to collapse
Agreed, I can't find any pictures of it actually on the phone above a very small resolution. So some nice digicam shots would work great. Anyone?
i think you can't open the keyboard with those case à 5$.
but with this one it's possible : http://www.amazon.com/AT-8925-Active...051150&sr=1-69
Click to expand...
Click to collapse
That's an outrageous price though. You can get these same cases on Ebay for $10/shipped in all colors. They're called the 2in1 case.
bedav said:
i think you can't open the keyboard with those case à 5$.
but with this one it's possible : http://www.amazon.com/AT-8925-Activ..._69?ie=UTF8&s=wireless&qid=1197051150&sr=1-69
Click to expand...
Click to collapse
I just called them to confirm and they told me it does open properly with the case on. And paying 24.99 for a crystal case is rediculous.
KyleK29 said:
Agreed, I can't find any pictures of it actually on the phone above a very small resolution. So some nice digicam shots would work great. Anyone?
That's an outrageous price though. You can get these same cases on Ebay for $10/shipped in all colors. They're called the 2in1 case.
Click to expand...
Click to collapse
It's Boxwave so of course it's overpriced. Don't know why I see so much love for them on these and other boards.
you can find it on ebay for about $9 shipped
ChInEsE ChIcKeN said:
you can find it on ebay for about $9 shipped
Click to expand...
Click to collapse
Yes. But we still can't find a review or pics on these to see how much bulk they add to the unit.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've seen those. What I'm more referring to is comparing it with and without the case. Same picture, two phones (or photoshopped together). Just to give a bit of scale to it
SpeedRazr said:
I just ordered one of these a few days ago should have it any day.
$13 and change shipped
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
I just got mine the other day from eBay, and the front face doesn't fit all the way on or stay on. I'm going to have to return it and find another one.
I've finally tested this case for more than 10 minutes and I really hate the fact that the edges are not beveled in, making it extremely hard to use my fingers to press the softkeys on the screen, onscreen scrolling and some slight awkwardness when pressing the outside buttons.
Mine was also made of white plastic, so it has this ugly white lip around the edges.
After removing my BodyGuardz skin, the case fits snugly and is very hard to remove (I accidentally cracked the lower piece while removing)
Oh well, you get what you pay for. Time to read up on Seidio cases
http://www.wirelessaccessories.com/... 8925 - TyTN II - Kaiser&sfid=134039&c=164107
I've used these for my last 2 devices. I don't recommend the rubberized as they scrape up easy. While you get what you pay for ($5.95 + ship) so I buy several. I prefer the protection from scratches and ease of use . It does make getting to buttons a little harder, I agree.
I went on Ebay and got a clear one for around $4 shipped. looks decent, works, only thing about the clear ones is that dust tends to collect under them and phone looks dirtier. a quick clean and back to new. i dont recomend dropping the phone using the case, but in all honesty i dont recommend droping the phone all together.
I am interested in buying this silicone case for my AT&T Tilt from eBay: http://cgi.ebay.com/Silicone-Case-f...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I was hoping if anyone else purchased it would recommend it or not?
Also, if anyone else knows of any other silicone cases out there, please post to let us know. I did not discover too many types of silicone cases myself.
TKN
And if no one is familiar with the case in the first post, what about this rubber made case: http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=896
- TKN
I am interested in buying this silicone case for my AT&T Tilt from eBay: http://cgi.ebay.com/Silicone-Case-fo...QQcmdZViewItem
I was hoping if anyone else purchased it would recommend it or not?
Also, if anyone else knows of any other silicone cases out there, please post to let us know. I did not discover too many types of silicone cases myself.
TKN
Click to expand...
Click to collapse
$4.50 for a silicon case? Well, I suppose even if the case is poor quality, you won’t greatly out of pocket.
That picture on ebay is pretty bad. I can hardly distinguish the silicon case from the device itself
And if no one is familiar with the case in the first post, what about this rubber made case: http://www.seidioonline.com/index.as...ROD&ProdID=896
- TKN
Click to expand...
Click to collapse
This case is already being discussed on this thread here: http://forum.xda-developers.com/showthread.php?t=352605
And towards the last couple of pages, it is briefly discussed here:
http://forum.xda-developers.com/showthread.php?t=336542&page=23
Yes, I do think it is one of the best. It looks like it offers more than adequate protection without compromising its lightness in weight. I will look to order this particular case next week when shipping begins (according to one of the members)
My last question about the Seidio case is that is it a snap on case? I have bought a case previously for HTC Wizard and the little plastic things that are supposed to the cover on the phone broke.
- TKN
I don't know what you mean by snap on case. Remember that the case is rubber and not plastic.
Perhaps if you refer to the thread below, you may find answers to your questions:
http://forum.xda-developers.com/showthread.php?t=352605
A whole thread is being devoted to discussing this particular Siedo case already
Try this one!
Don't know if you're dead set on a silicone case for your phone but i personally went for a crystal hard case as the silicone cases don't really work too well with these phones as there is an open end on them in order for the keyboard to slide, plus i couldn't really find one that i liked the look of.
So i got one of these from this seller in Hong Kong... arrived in 4 days and the quality is excellent!
Have dropped it once and there was no damage to the case or phone. Even came with a screen protector too!
Crystal Case Kaiser
DITO
I too bought one of the crystal hard two piece case for my Kaiser. I was a little iffy when I got it out the packaging at first but it is now top of my eBay best ever purchases list.
Item
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Crystal Case+Screen Protecter for HTC TyTN II/2/P4550
http://stores.ebay.co.uk/AccessoriesShopHK
It not only creates a plastic protective environment for the phone that is not in the least intrusive to every day use, but without wishing to sound in the least vain, it makes the phone look utterly gorgeous and yummy. I have had many comments since using my Kaiser in public, but over the last few days several people where I hang out have wondered what the hell phone I was using to type on.
Point is...GET this item if you want to protect your phone and at the same time enhance its looks.
I bought that silicone case you linked to and let me tell you that thing is horrible. The fitment is all loose and it basically falls off.
vanydotk said:
I bought that silicone case you linked to and let me tell you that thing is horrible. The fitment is all loose and it basically falls off.
Click to expand...
Click to collapse
Which silicone case are you referring to so that I can avoid it also?
- TKN
the one on ebay from that hong kong seller.. the one that only covers the back and not the front
yep bought one of those crystal case+screen protector from ebay as well. Just arrived today and I am already loving the case. It looks great.
Wondering if anyone has actually tried one of the silicone cases yet. Another thread on this: http://forum.xda-developers.com/showthread.php?t=369377&highlight=silicone
Here's the one I'm looking at: http://www.buy.com/retail/product.asp?sku=207883654&listingid=21964170&dcaid=17902
Hello,
I have T-Mobile HD2 (US) and currently using this case with clip PDAir/Monaco case which fits perfectly and overall is good.
Pic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But ... I also want to double protection with some kind of plastic hard shell. I will be using hard shell TOGETHER with PDAir case (this case has stretchable sides). I used same kind of setup for HTC HD.
Now ... ideally this plastic case would be Capdase Alumor HD2
but unfortunately because of size difference it does not fit perfectly on T-Mobile's version on HD2 (1.5mm taller) and when I emailed Capdase they told me that there are NO plans to make version for T-Mobile HD2
So I'm stuck with eBay and such What I need from this case is preferably protection of corners, no bulk and .... case should not be GRIPPY !!! I mean, no unti-slip coating. The reason ... silicone and such are grippy and give trouble when inserting/removing it from PDAir case. I dont want that ! I want it glide Or at least similar to back cover of HD2 itself.
So those resin/selicone/etc cases on eBay - they are out.
Having said that ... any advice ?
expensive hard case
I saw this. It is expensive, but it does fit really nice.
expansys-usa.com/d.aspx?i=189952
lttl.espana said:
I saw this. It is expensive, but it does fit really nice.
expansys-usa.com/d.aspx?i=189952
Click to expand...
Click to collapse
There is no clip and it is hard to take HD2 out. I prefer slip-out cases like PDAir.
bogdatov said:
Hello,
I have T-Mobile HD2 (US) and currently using this case with clip PDAir/Monaco case which fits perfectly and overall is good.
Pic
But ... I also want to double protection with some kind of plastic hard shell. I will be using hard shell TOGETHER with PDAir case (this case has stretchable sides). I used same kind of setup for HTC HD.
Now ... ideally this plastic case would be Capdase Alumor HD2
but unfortunately because of size difference it does not fit perfectly on T-Mobile's version on HD2 (1.5mm taller) and when I emailed Capdase they told me that there are NO plans to make version for T-Mobile HD2
So I'm stuck with eBay and such What I need from this case is preferably protection of corners, no bulk and .... case should not be GRIPPY !!! I mean, no unti-slip coating. The reason ... silicone and such are grippy and give trouble when inserting/removing it from PDAir case. I dont want that ! I want it glide Or at least similar to back cover of HD2 itself.
So those resin/selicone/etc cases on eBay - they are out.
Having said that ... any advice ?
Click to expand...
Click to collapse
I purchased this one for my T-mobile hd2 and it fit fine...and I use it exactly like your talking about...his ad now says the case does not fit the T-mobile HD2 but like i said...fit mine great..even uploaded some pics to one of the other case threads showing what it looked like on my phone.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250602467949&ssPageName=STRK:MEWNX:IT
The pics I took of it: http://yfrog.com/j5imag0522xejx
famewolf said:
I purchased this one for my T-mobile hd2 and it fit fine...and I use it exactly like your talking about...his ad now says the case does not fit the T-mobile HD2 but like i said...fit mine great..even uploaded some pics to one of the other case threads showing what it looked like on my phone.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250602467949&ssPageName=STRK:MEWNX:IT
The pics I took of it: http://yfrog.com/j5imag0522xejx
Click to expand...
Click to collapse
Thanks for the info ... it is hard to see on eBay and on your pics ... does this case cover corners ?
I was looking into this one http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=310213338924&ssPageName=STRK:MEWNX:IT
and it does not cover corners.
bogdatov said:
Thanks for the info ... it is hard to see on eBay and on your pics ... does this case cover corners ?
I was looking into this one http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=310213338924&ssPageName=STRK:MEWNX:IT
and it does not cover corners.
Click to expand...
Click to collapse
It does cover the corners although the top and bottom are open...it also will NOT fit into a dock I purchased with the case on but will if I take case off...but fits in and out of the leather holder on my belt fine with no "sticking"....I'll try to take some better pics of top and bottom at corners...problem is the phone is my main camera and older phone takes crappy pics. On other hand it was only a $3 case and came with a screen protector so not alot at risk.
I would really appreciate better pictures of top/bottom. Thanks in advance !
Does it look the same as here (there are good pictures already):
http://cgi.ebay.com/HARD-RUBBER-MAT...AU_MobilePhoneAccessories&hash=item27b0ebcdd9
I have the black gel skin that T-Mobile sells for this phone. It is very smooth and not at all grippy, and allows the phone to slide easily in and out of my pocket. (Compare this to the ribbed, rubbery, and very grippy skin that came in the box with the phone.)
Edit: I see you specified "hard shell" so I guess this doesn't fit the bill.
bogdatov said:
Now ... ideally this plastic case would be Capdase Alumor HD2
but unfortunately because of size difference it does not fit perfectly on T-Mobile's version on HD2 (1.5mm taller) and when I emailed Capdase they told me that there are NO plans to make version for T-Mobile HD2
Click to expand...
Click to collapse
I refuse ebay. I ordered this Fommy, but it didnt come in yet. The Alumor would be great if it fit.
Hi everyone,
I was just about to buy a leather folio on ebay for my tablet when I decided to do a quick search for a TPU case just to be safe. And ONE hit came up. Looks like the seller 'tpdgear' is selling a tpu case on their page. The seller states it has limited quanities and is seeing how the product sells before having more made. I bought one myself and will give my opinion of it early next week when I receive it. I have been looking for one of these cases forever and now its finally here!! From the pictures, it looks like they have 'tpdgear' emblazoned on the back of the case (dunno if thats a turn-off for a lot of people).
Sorry, but the forum doesn't allow me to post outside links on the forum since I'm a new user. You can do a search for 'Acer A500 tpu' and it will give you a hit for user/seller 'tpdgear'
For those who don't know what TPU is, its an abbreviation for thermoplastic polyurethanes, the material the case is made of. Its more rigid in structure than your typical silicone, but softer and more flexible than the plastic hard cases. I have owned multiple cases made of these for my cell phones and i LOOOVE them. Just wanted to let you guys know for those that looking for them. I dread having to get one those bulky leather folios and have been using a netbook sleeve/case myself.
this one?
http://cgi.ebay.com/Clear-Smoke-TPU...?pt=US_Tablet_Accessories&hash=item3cb9bbee06
Yes, thanks godashram for posting it!!
You beat me to it. Just discovered it today, was going to post but saw this thread. Bought mine a few mins ago. I will post when i get it. Anyone else order one?
sure now they get one out there. literally just got my skinit skin in and put it on yesterday. Will tell you though, everyone thinks this skinit textured carbon fiber is real. It is the best fake carbon fiber i have seen yet
slowestcivic said:
sure now they get one out there. literally just got my skinit skin in and put it on yesterday. Will tell you though, everyone thinks this skinit textured carbon fiber is real. It is the best fake carbon fiber i have seen yet
Click to expand...
Click to collapse
LOL..... I was going to do the same thing but will try the TPU cover first. Does the skin come with all that cut outs for the speakers a such? I assume so.
Hey, I've been looking for one of these for a while...good find! If possible, post some pics and let us know how well it fits and all. I'd like to know if it works before I pull the trigger and buy one. Thanks!
I got it! Came in today! Here are some pics:
The side where i am pulling back the case is softer than i like but it is protecting it very well. The cutt out for the lock right below is the one that isnt cut out very well but does not cover it. I will get more pics up when i get back.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Looks great! I've wanted one since I got my tablet. I just ordered mine today so I'll comment on the quality when I get it.
Yeah I was gonna wait until I got your review before ordering, but instant gratification won out. Mine is on the way. Glad it does truly look decent, so I didn't just waste 18 bucks. Thanks for the pics!
Just got mine about an hour ago. Other than the giant "TPDGEAR" across the back, I love it. I've been looking for something like this since the A500 came out.
Just got mine today! It fits well, and is a lot firmer than the usual silicone covers. My only complaint is the softness of the sides, top and bottom edges. I solved this with a few strategically placed bits of doubled sided scotch tape along the edges. Now when I pick it up by the edge, it doesn't pull away from the tablet. Overall a good little cover though.
just received mine yesterday. case fits like a glove and eliminates a lot of bulk compared to other sleeves, portfolios and cases. cut-outs for ports & speakers line up true and allow cables to be inserted with causing it to be loose. material is sturdy (its tpu) and came in a smoky color. like karlkarloff said, some people may find the edges to be a little too soft, but i personally didn't have a problem. there is 'TPDGear' etched in the back in big letters so that would be my only complaint. big thanks to razen_spec for posting pics!
So I've had mine for a week now and I really like it... I like the textured feel and the TPU material is very sturdy and has a tight fit. The only small issue I have is the logo. I would have rather had a cutout for the metallic Acer insignia.
I just bought one today. I can't wait to be rid of the HORRIBLE Acer case.
There's another one on ebay now. Same price, no annoying logo in the back!
Just bought it, I'll report back in 5-10 business days.
PS: just got my Acer yesterday (staples deal) and loving it so far.
i love this new table. had ipad1 and i found it best used for coffee toaster.
love the widgets, and the google browser.
ordered! Thanks
rstuckmaier said:
There's another one on ebay now. Same price, no annoying logo in the back!
Just bought it, I'll report back in 5-10 business days.
PS: just got my Acer yesterday (staples deal) and loving it so far.
Click to expand...
Click to collapse
Damn, I like my TPD Gear case, but the one you found looks a little nicer. Looks like it wraps around the front of the screen a bit more so the siders won't flex out like they did(two sided tape took care of that) on my TPD one. And its black with no logo, I might have to get it and see if I can sell my other one.
How is the screen covered for travel?
Thanks for posting this case. I just the Iconia for the hubs' b-day this week, and haven't decided on a case yet. We just got a zipper neoprene case%for it (cannot beat five bucks!)