Related
Has anyone this great app?
http://geocities.com/myppcpe2003/index.htm
Maybe a key for it?
I'D like to use it :twisted:
It appears to be the best prog that I've looked for to switch my XDA2 to a changeable caller profile phone like a nokia!
I liked this app initially, great interface and lots of functionality, however I found a few problems:
Sometimes after changing profiles the ring would be silent when it should be heard - the dialog would pop up showing the caller, but no sound.
You can set it to automatically revert to the normal profile after <n> minutes, or at a certain time. For me this only happened when the XDA was on - thus if it should have switched profile and then a call comes in before you have switched on the device it still uses the wrong profile.
If these problems can be sorted it would be a great app.
As for a key... go to PocketGear and but it!
Yeahh..So It's not a perfect software again.
Do you know any program that analyze the caller from the contacts and you can select for example just one number or one goup to receive? The other ignored or silent like Nokia phones.
I have come across MUTX RingToneX which allows you to set ring tones by contact or category so this may well give you what you want. Can't tell you how good it is, but you can get a free trial from the link below:
http://www.pocketgear.com/software_detail.asp?id=8675
Thx for the answer but I'm looking for an app with easy switching between sound profiles.
For example:
A) MODE
Every unknown number has RINGTONE1
FAMILY group has RINGTONE2
FRIENDS group has RINGTONE3
MY CARALARM SYSTEM (has a mobile calling function) has RINGTONE4
...etc.
B) MODE
Every unknown number is silent or ignored
Every other group than MY CARALARM SYSTEM is silent or ignored
MY CARALARM SYSTEM is ringing and answered (at night while I'm sleeping I want to receive just the call from my car's alarm system)
It's just a simple thing that a lot of phone's using. (Nokia & others)
I hope somebody understands my problem and knows an apllication with the ability I wrote above.
Thx
I think (not sure!) that you need a combination of two programs:
JGUI My Phone Profile AND IA Caller ID (OR Caller2picture)
Tekflow said:
I think (not sure!) that you need a combination of two programs:
JGUI My Phone Profile AND IA Caller ID (OR Caller2picture)
Click to expand...
Click to collapse
THanx the answer but I'm sure (not think) that I don't need the combination you wrote because My phone profile can switch just sound profiles with setting the ring volume or vibrating, IA caller ID can add a picture to a call, Caller2picture can add a ringtone and a picture to a call.
But I need what I wrote upper, please read it perfectly, because it is something different.
I need a software that has the ability to verify a caller-group and for example you can reject all number/call except the caller-group you set like with Nokia phones.
ANYBODY DOES UNDERSTAND WHAT I WANT???????
Maybe because I'm from Hungary and my english is not so well..... :?
My Phone Profile 3.1
My Phone Profile 3.1Full
Reg Code: TMPP-1177-JGUI
Have a fun!
If you have an XDA II, you don't need to get the IA Caller ID because it's already on the XDA II. IA Caller ID is called Photo Contacts in the XDA II.
Caller2picture can add a ring tone to a group. Whenever you want to reject a specific group, give it a silent ring tone.
@VHS: bad boy... i don't think that this should be made public... software worth using is worth bying.
hehe ...bad not bad, but apart from that a/m ...
discussion has been pretty much interesting to me as to sound profiles etc, I have been also looking for some time for software allowing for easen phone handling
regards and Happy New Year,
monika
Finger Clix
Check this:
http://www.imaginet-software.com/index.aspx?p=fingerclix_en
It is the best phone dialer ever!
thank you
I wolud give it a try
regards,
monika
:? :x :evil:
So..Nobody understands what I want.
OK.
Tekflow:
Thanx, but I know that I can set a silent ringtone for a group with one of these softwares. But I NEED SOMETHING DIFFERENT:
I have a car within a mobile-phone-alarm-system. If somebody does something with my car, this mobile (in my car) calls my mobile phone which is with me. So, usually (always) I switch off my phone by night. But if I switched off my phone I would never know my car's calling. That's why when I had a Nokia7650 I can set a profile called Night-profile which has the settings with all calls + all groups has a silent ringtone and my Car-alarm-number has a loud-sirene-ring. That caused when somebody called me except my car my phone was silent. When my car called it ringed with the highest level. And if somebody wanted to stole my car I had heard it. But not now. Because I don't want everybody to call me from 6 a.m., that's why I switch off my phone, but if I switch off my phone I can't hear if my car's calling me.
That's what I can't set in my XDA2.
With no any of your suggested programs.
I know all of them, and I know none of them has the ability I wrote upper.
SO........SOMEBODY UNDERSTANDS WHAT I WANT TO SAY SINCE DEC.05.???????????????????????????????????????????????????????
p.s.:I think so that FingerClix is the best dialling program for the XDA (I use it), but I need another thing, not just for dialling or to give a ring volume for all numbers and groups. My phone profiles can set just a general volume and vibrate settings without any choice to give a different volume for just one group or one phone number like Nokia.
(Maybe since dec.5 there's an update for MyPhoneProfiles or for the others and they have expandable ability?)
I (hopefully) understand what you talking about (have had a Nokia for years...), but i'm not aware of such a tool at this time for the MDA/XDA.
regards,
If I understand you: you need a program that gives you the opportunity of turning off the sound of the telephone for all incoming calls except one number or one group of numbers, or, better, to make call barring for all calls except for one number or one group of numbers (some kind of filtering). I also don't know if this kind of program is available for the Pocket PC Phone. Anyone on the forum aware of this ?
anybody has version 5?
I think what Tuningszocske want is something like Blacklist in Nokia Symbina phones. I know of a Chinese program call CallerFirewall, it allows one to add contacts to black or white list, you can choose to block all contact in black list, receive call only from white list or block all incoming calls etc. This program is compatible with dopod686、O2XDA、T-Mobile、and LegendT108.
I am looking for an app that lets me do stuff when certain incoming numbers (either a simple editable list or a selection of contacts) call..... essentially I want the phone to answer and then hang up immediately so the numbers don't get my voicemail, they just get rejected.
At the moment I have the contacts set with a silent ringtone so I don't get disturbed, but sometimes I get voicemails from them and I want to prevent these.
I have had a look at Mortscript and can find how to handle incoming calls, just not how to handle incoming calls from specific contacts in specific ways.
Any help appreciated
go to www.youmail.com
i like this free service and it handles caller id calls more efficiantly than any software you can purchase.
Thanks for the link, unfortunately it's US only and I'm in the UK.
CallFirewall does exactly that what you need.
Try this:
http://www.mobiion.com/magicall.html
It does everything you asked, and a whole lot more.
+1 for magicall... it rocks
Thanks for the links guys, downloading them both now
Call Firewall didn't quite do the trick as I could only get it to go to voicemail, but Magicall does 100% what I want, plus more, so I promptly coughed up the cash for it
Somewhere else on the forum there's a program what lets you make your own interface in html with js/flash. you can use that and make javascript countdown for x seconds and than let it pick up and hang up... or whatever you want not the best solution but it still is a solution
I wonder if there is an application that would pick up my phone after some rings, and plays a message and people can drop a message.
So I will have a voicemailbox with recorded messages which I can point and click at, save them, listen again, etc. Just recorded als .mp3 on internal storage. Maybe even callback options, sms-back options etc.
I really hate dialling that voicemailbox number, choosing 1 and 2 to listen messages. I have no overvieuw of messages etc.
The app looks fairly simple to me. Does it exist already?
You're searching for some kind of on-device visual voice mail
I would really like to see this at this moment my voicemail is nothing more than a question to mail me or sms me but most people do not like that
one question when your phone is off or you are out of range what would you like another app to take it over?
This is a nice idea...
See it more as a secretary app. instead of a voicemail app.
Where you're in your car and you don't / can't talk.
Perhaps something with different messages you can choose from (you need to make them yourself?)
Something like "Hello this is <insert name>, I'm driving at the moment, please leave a message after the beep" *beep* The person leaves a message that will be saved as mp3 file for example.
@WvanWaas
When out of range, your 'standard' voicemail will take over.
But when in meetings, or as said, driving, it would be nice that the persons message can be stored on my device.
The ultimate thing would be that this program can dial my voicemail, automaticcally send DTMF tones (time and pattern), and store eventually new voicemailmessages locally. The number of new voicemails on my network is available (since manila uses it too).
With Telfort home-phone, I get emails with .mp3s of voicemail messages (VOIP). Thats really good.
With vodafone UK I was using vodafone mail - voicemails automatically appeared as emails with WAV attachments.
Was very handy
There dont exist any programs?
the only app is isecretary. it doesnt work on diamond though
I use www.youmail.com and also wrote a simple client to parse through my emails and just list my voicemails in a UI.
Youmail also does speech to text transcription so you don't even have to play the sound file-- just read it.
It not for outside US I guess...
It looks promising...
It exists for Nokia phones
I have not found an application as such for the diamond but I know that it exists for Nokia. With the Nokia N95 there is a built in application that works as a voicemail. Of course only when there is coverage and the phone is working.
The application picks up the call after some time (configurable) and plays a greeting message that you have previously recorded and after the beep, the caller can record his message. The application saves that recording and whenever you are available you can playback that message.
Hope to find one for Diamond.
Yup, my T-Mobile voicemail charges are silly, plus I'd like to have more control and functionality from my voicemail. An included blacklist filter would be handy too.
I have a Touch Pro (Raphael).. Is there really nothing around at the moment that will work? That's kind of strange.
Just kick this one up once more ...
This type of app could cause some expensive long distance charges if you were outside of your local calling area though, no? I'm thinking your phone would need to be connected to the call in order to record an .mp3 voice message locally on the device, whereas carrier voicemail can be received regardless of where you are anywhere in the world without costing you as the user a fee to receive a message.
I see that Touch HD can record calls.
http://forum.xda-developers.com/showthread.php?t=457808&page=4
A simple application which auto-answers, plays a file, records a message and nicely puts them in a list, so I have total controll of my voicemessages?
That would be well killer-app... I'd pay for it, simply because I need it.
i realy want this app too!!!!!
Sounds nice to me as well
+1 here....
Try This. Loaded on my Diamond but havn't tested it.
65coupei6 said:
Try This. Loaded on my Diamond but havn't tested it.
Click to expand...
Click to collapse
thanks, i installed it, and recorded an message for people calling me, but cant get the program pick up my call... i allready said he must pick the call after 3 sec. and also after 0 seconds, he dont pick up any call... i added the number with wich i'm trying, at an group, and i see the missed call in isecretary also, but he dont pick up... any body know how this works? the site op the maker is down
Why I Secretary can’t mute the microphone of my xperia x1 and why the caller can’t hear my answer message
How can I fix this using registry or any tweak tool for windows mobile 6.1
thanks
that's what every diamons-user needs!
http://www.youtube.com/watch?v=jqnhm8yfTqM
I spent a couple hours sorting through blog posts, downloads, cabs, blah blah blah... with the goal of getting my forsaken Treo Pro (WM6) to use VOIP through my office's SIP/Asterisk setup.
To save you all some headaches, here's the distilled version of what I found to be the best combination of software and quick hints for install:
I started with this blog post, to give credit..
http://voipguides.blogspot.com/2008/05/voip-sip-client-for-windows-mobile-6.html
But I used different software... so I've included a zip with the package of all the stuff I installed to make the damn thing work.
1) Install all of these:
- voipdrivers.cab
- custelvoip.cab (works better than MajikVOIP.cab)
- sipconfig.cab (originally named SipConfigTool_2_0_1.CAB)
- audioroute.cab (from http://www.teksoftco.com/index.php?section=freeware)
I've also included setupvoip.cab .. which is a fancier SIP setup tool, and may work better than sipconfig... but I used sipconfig originally, so that's what I'm writing up here.
2) Restart your phone
3) Run sipconfig ... enter all of your sip configuration details, and also use the menu option to enable VOIP over 3G if you desire it.
4)Now go start -> settings -> personal -> Phone. Choose ther Internet Calling tab. Set the option for "whenever available".
5)On the main/Today screen you will see a phone icon with description VOIP ( you entered name of provider VOIP in (step 4). It'll show you the status of whether or not it has registered with SIP. A Hint, you might need to trick the phone into connecting to 3G first... e.g. by browsing the web... otherwise WM6 at least doesn't seem to auto-connect to 3G for SIP.
6) After connecting using 3G or wifi, You will see the status displayed as VOIP: Available.
7) You can now make calls as normal, or receive calls in.. and everything is routed through VOIP.
8) You'll notice that many WM phones will route the audio through the rear speaker (annoying) .. which is why you installed audio router from teksoft... it adds a little icon on your top system tray to let you change between earpiece and rear speaker for audio. There's a bunch of audio switchers out there. This is the best one by a mile. And it actually works.
Cheers,
Andrew Eross
Thanks for your effort. Similar tool is already posted as Schap - Setup voip Tool -
http://forum.xda-developers.com/showpost.php?p=1364611
Thank you!!!
I've looked around for a guide as clear as yours. You've the best guide all around... Thank you a bunch...
Thanks for your great job. I new on Windows Mobile so I need a lot this kind of help.
I download and followed your installation procedure on a HTC 3G+, T3238 (chinese version of the HTC 3G, manufacturer HTY Taiwan)
Works well, Hope others also will be successfull
By the way, is there an also simple way to sending DTMF tones for remote control of my answering machine? When I try to send numeric keys after the call is connected it looks like I start a new connection with numbers actually for remote control of my answering machine.
Hi, I'm also in the club that has browsed hundreds of post looking for a setup of VOIP and also looking for a solution on good incoming sound level when using Voip on phone. Your files solved all my problems!
Phone: HTC HD2 Norwegian with Rom 1.66. Use the Norwegian company www.iplink.no for VOIP at home / office and (now) on my mobile phone.
Made my own ipdialplan.xml which can be found attached to this post.
Done some testing calling people through Voip: after approx 1 minute the connection falls down. I looks like I'm still connected to the other part (interface shows that a call is going on) but none of us can hear the other part. I then have to cancel the call in the phone interface. Make new call to same person, after approc minute the connection goes down again...
Is there some kind of registry setting that controls this "timeout"?
Hi, this tools does work also on windows mobile 6.5?
I know that on the HTC Fuze some of the wmvoip.cab installs breaks the GPS - anyone test this yet?
THanks!
does this work on hd2
I've done everything you said, but I can't find the option to show internet calling is available. I have Kumar 1.5 installed, and am about to try another ROM (maybe Laurentis, the SIP drivers are cooked in). What are you running?
shah_vm said:
does this work on hd2
Click to expand...
Click to collapse
yes, it does!
Best Voip All in one solution. Try This
http://forum.xda-developers.com/showthread.php?t=596682
I tried last night to no avail. I am guessing that using a WM6.5.x ROM stops me, because I can't access the right settings (start-settings-personal-home or phone) because my settings button takes me straight to the black screen of text version. I even tried to go to a 6.5 ROM (cooked with VOIP drivers in), and even then I couldn't get the VOIP phone icon to appear on the today screen. Every time I selected it from the Internet tab in the setting, it would just ignore my changes.
I would love to get this working with a nice cooked 6.5.x ROM, and am not giving up yet, but man is this frustrating. As a side note, I am learning lots about the workings of WM.
sidelait said:
yes, it does!
Click to expand...
Click to collapse
thanks for the reply. i have also installed i was able to receive incoming call but unable to make outgoing call. are you able to make outgoing call?
Okay, I feel like an idiot, but I figured out how to enable the internet calling tab on my HD2. I am still apparently learning lots about WM6.5. After I disabled Sense, I could add tabs to the today screen. I did everything right, but the voip tab just either says searching or not active. And it somehow disabled my data connection. Not sure anymore, almost through trying ROMs. Is everyone else running this on a stock ROM, or are there certain features that interfere with this?
VOIP almost working
I've implemented Internet Dialing and have SIP configured my my provider and I am able to receive calls. But, I notice that when I dial out a "9" is put in front of the number I'm dialing making it impossible to dial a number correctly. How can I change this?
forepj said:
I've implemented Internet Dialing and have SIP configured my my provider and I am able to receive calls. But, I notice that when I dial out a "9" is put in front of the number I'm dialing making it impossible to dial a number correctly. How can I change this?
Click to expand...
Click to collapse
You need to edit your ipdialplan.xml. It's in your windows directory. Basically it is set up by default to dial a 9 and in area code 425... If you look at it you should see where to edit it... There's also a utility knocking about here to set up a basic one for other countries...
Can't svae ipdialplan changes
I can open Total Commander find the file and make the changes to ipdialplan.xml by taking the "9" out of the 10 digit plan and the 7 digit plan, but I can't save the changes. I get "Error, could not create file" every time.
It's either open or write protected. Edit on the PC. Copy it over with a different extension. Rename the original, and then rename the new one to the right name.....
I have this very strange problem.
I have tried to install all this, but it works only partially.
Outgoing calls work and the receiving party can hear me. However, I don't hear them. Also, on incoming calls my phone doesn't respond at all.
Does anyone have any idea what is the problem?
I'm having a Topaz @ WM65.
Here's my scenario,
I'm receiving calls from 3 people that are annoying, I'm not looking for to block these people, but looking an app that can REDIRECT these SELECTED CALLERS to the number of my CHOOSING.
please help me find an app that forwards calls (THAT DOES NOT TAMPER WITH VOICEMAIL)
Thanx in adv.
I hear that phoneAlarm does this from pocketMax.
http://www.pocketmax.net
just tried it, and did find anything regarding call forwarding.
anyone else????
This won't help with your scenario, but might be useful for future reference.
Google Voice offers this functionality by default. You can send those callers to another number, or straight to voice-mail, or block them entirely if you choose.
Unfortunately, I don't know of any WinMo apps that will do that.
Not sure if MagiCall will help you. You can set up custom rules for each number.
Worked great when I was getting annoying calls.
I normally was using Magi call, but have it under hang up and drop. Problem is that it hangs up a second later (they can still hear my background and notice that it the call is being hanged up for the 1 second).
I have tried about 2-3 apps that they are suppose to block the call, instead it send s them to voice mail (I don't want them to have access to my voice mail) or does hang up immediately. Only if there is a TRUE CALL BLOCKER is would consider it.
I now focusing in finding a app that forwards these selected callers to any number of my choosing.
There has to be an app like this, someone hopefully comes through with that answer.
Extreme184X said:
just tried it, and did find anything regarding call forwarding.
anyone else????
Click to expand...
Click to collapse
I'm looking for the same thing and PhoneAlarm Pro does support this feature from what I've read. I downloaded the Pro version and installed it. But after restart, it will get stuck on the main screen and nothing else will show. I waited for a while to see if it will load but nothing ever happened and I kept restarting over and over. I finally ended up doing a hard reset. I'm running on the Leo Cell Evo v5 rom tmobile and I don't know if it has something to do with it, but I don't feel like flashing to another rom to see if it works for me so I'll just leave it alone and let someone else figure it out.