Related
hallo
can i rotate screen n my magician and use pocet world and pocket excel in landscape mode?
thanks
arek
iampinki said:
hallo
can i rotate screen n my magician and use pocet world and pocket excel in landscape mode?
thanks
arek
Click to expand...
Click to collapse
yes,
rtfm!
If there's no built in program to do it (which I'm sure there is), PHM Tools provides the excellent PHM Keys to do this.
V
Start -> Settings -> System -> Screen and set the orientation fromt there.
Alternatively there is an icon on the taskbar.
Second icon fromthe right at the very bottom of the screen:
hallo
thanks for all ypur reply, i don't have magician yet, i need this info to choose correct irda keyboard
thanks
but how its possible without icon
some programs (such ButtonMAX ) cant assign rottation function on hard button and maybe its possible to make some batch file or just run some file from /windows wich make screen roration
Dear XDA-Developers,
As a volunteer for a project i'm making a webapplication which is controlled by a pocket pc.
To make it useable for people i want Internet Explorer to start automatically on the boot of the device. That on itself isn't that hard, i know.
I need IE to open a specific webpage, and go in full screen mode.
Maybe it's not that difficult, but next to webdeveloping, i can't make software etc. so i was hoping someone has a solution for me. It would be a big help.
Thanks in advance.
You can use Resco Explorer to make a shortcut like this:
"\Windows\iexplore.exe" http://www.xda-developers.com (To open your favorite site )
You can put this link in \Windows\StartUp\
I currently don't know a method to open fullscreen.
Well last time I tried if I exit IE when it's full screen, it stays full screen next time I opened it. This is with WM6.
Hi,
Not sure if this will help but Confused Stu has just released a ROM that starts IE in Full Screen.
http://forum.xda-developers.com/showthread.php?t=371014
Cheers.
THIS is how to start Pocket IE in FullScreen mode
I'm sure this is waaay too late for your project, but for the sake of posterity (and for the search engine) here is how to start Pocket IE in FullScreen mode...
It's in the registry- HKCU\Software\Microsoft\Internet Explorer\Main
the key is a DWord called "FullScreen" set it to 1.
Obviously, if PIE is already running (minimized but not closed) you'd have to kill the process, write the registry entry, then open PIE. PIE retains the fullscreen setting until you change it (either via the registry or by exiting fullscreen mode within PIE) but it couldn't hurt to check the registry value before firing up PIE.
All of this easily done via Mortscript. In the case of a console-type app that runs on startup and you want the user to stay in that app (and out of the rest of the system), you'd want to check periodically to make sure PIE was the active window, and activate it if not. You might also want to prevent access to the PIE menus (via the SoftKeys) and also the Start Menu button. I'm sure there's a util somewhere to disable the HW buttons, but off the top of my head, I can't think of any.
Hi all,
I was wondering if it is possible to force tomtom navigator to always open in landscape mode.
I've been using gyrator2, but when i mounted in the car, the screen seems to jump around unsure of which way to orient, most probably due to vibration in the mount (which is another issue i'm going to address).
I've seen the same thing happen with GSen.
Just add TTN to the list of excluded applications and rotate the screen manually where necessary.
veearrsix said:
Hi all,
I was wondering if it is possible to force tomtom navigator to always open in landscape mode.
Click to expand...
Click to collapse
1. Install "Mortscript"
2. Run TomTom270 (Edit this file with notepad, change the value from 270 to 90 if you want it to turn other direction landscape)
3. Create a shortcut in Start Menu if you want.
NOTE: Don't forget to DISABLE it from any rotating application if you have added e.g. Gyrator etc.
Regards
Sid
But where do you need to edit the tomtom file, is it on the desktop or on my mda compact IV? i've installed the cab file, en there are three wordfiles in different languages?? pleasee give me some more direction.
thanks in ahead.
db ibouh said:
But where do you need to edit the tomtom file, is it on the desktop or on my mda compact IV? i've installed the cab file, en there are three wordfiles in different languages?? pleasee give me some more direction.
thanks in ahead.
Click to expand...
Click to collapse
Copy both the file to your device
A. MortScript 4.1
B. Just One of the MSCR file which ever direction & popup or No-Popup suits you.
After the installation of MORTSCRIPT just run "TomTom2.mscr".
You can also make a shortcut under Tf3D Programs tab:
1. Copy a SHORTCUT of the TomTom270.mscr file to (\Windows\Start Menu\Programs)
2. Remove the NORMAL TomTom icon from the "Programs Tab" (Optional)
3. Add "TomTom270" to "Programs Tab"
I have uploaded again:
1. Mortscript 4.1
2. Start TomTom 270-degree with a Rotate question Yes,No,Cancel (It will ask you the question everytime you run this file)
3. Just Start TomTom 270-degree withOUT a Rotate question
4. Start TomTom 90-degree with a Rotate question Yes,No,Cancel (It will ask you the question everytime you run this file)
5. Just Start TomTom 90-degree withOUT a Rotate question
Regards
Sid
Hi, I have a Touch HD and when I try and run the script it rotates for a second and then rotates back to Portrait view.
You said that you were using gyrator2.
I'm a gyrator2 newbie, but I created a TomTom orientation Event, mark landscape and rotate screen.
I don't know why TomTom don't start at landscape after that, you once you put the phone on landscape once, inside TomTom, it never changes anymore. So it will work for you.
Rodrigo
i prefer changescreen absoluting the best soft for turning apps.....
never had problem...
filterfreak said:
Hi, I have a Touch HD and when I try and run the script it rotates for a second and then rotates back to Portrait view.
Click to expand...
Click to collapse
Same with me, doesn't attempt to load TomTom, just switches Programs screen to landscape for a second or so, then switches back
Thanks guys works great!
...although I had the same issue with my HTC Touch HD, simple fix just edit the tomtom7.mscr file you created and correct the path, which should do the trick!
ie.
Rotate(270)
Runwait( "\Program Files\Navigator\Tomtom Navigator.exe" )
Rotate(0)
Works for HD2!!!
Works for my HD2 as well, you just need to edit tomtom7.mscr and correct the file path, for me it looks like:
Rotate(270)
Runwait( "\Storage Card\Navigator\Tomtom Navigator.exe" )
Rotate(0)
Hey guys,
I just got my HD and have really no clue how to get the gsen to work so i can write sms and emails in landscape. Also I would like a few other applications to be in landscape too.
Can anyone help me??? It would be greatly appreciated.
Can someone please help me? or give me website that gives instructions? I really need help for this!!!!!!!!!!!!!!
gsen should by default enable landscape for almost any app (with some exceptions like tf3d and so on). after installed you should run gsen manually and then notice if the screen rotation is working. then if you like etc you can run gsen cfg and set it to autostart via left soft key.
crashDebug said:
gsen should by default enable landscape for almost any app (with some exceptions like tf3d and so on). after installed you should run gsen manually and then notice if the screen rotation is working. then if you like etc you can run gsen cfg and set it to autostart via left soft key.
Click to expand...
Click to collapse
Is it the best software for the HD to use for auto-rotation? Also how do i install it on the phone? thats my main problem. It seems to have come already pre-installed but cant figure out how to work it....
simply download the cab trasfer to phone and tap on it from the phone
OmZ said:
Is it the best software for the HD to use for auto-rotation? Also how do i install it on the phone? thats my main problem. It seems to have come already pre-installed but cant figure out how to work it....
Click to expand...
Click to collapse
Pre-installed?..... GSen doesn't come pre-installed.
Where did you get it from?
He's probably just talking about the original rotator that excludes most everything, aside from the media/internet based programs.
Works??
Hi again.
I installed the prog right now, started and open the settings. Screw the phone -< works fine. close settings, open programs, tur the phone again -> nothing happens. Like in nearly) every other program. Opening the settings again, nothing happens too.
So i turned the GSEN off an on again sometime, settings work but nothing else.
WHAT'S THE PROBLEM???
Thx for reply
Did you read the readme.txt file that came with gsen?
Works fine on my HD
Here is a part of the file:
1. Description
Auto-rotate screen on SOME devices with g-sensor.
Install GSen and run it.
If you run it again, program will ask you "Unload program?".
If you answer yes - program will be unloaded.
This also possible without question with parameter #unload.
You can use configuration shortcut for edit configuration file.
This file can include this command:
#window(text or class name) - add window description
#timeout(value) - default value 1000 ms
#onlyfor(0|1) - if 0 auto rotate work for all programm except defined by #window, otherwise ONLY for this program.
By default program not rotate screen if Manila or Teeter is foreground application, but you can edit this list.
#fdscreenoff(0|1|2) - if 1, program will switch off screen if you put device with screen on bottom, if 2 device will suspend.
#lockscreen(0|1) - if not present = 1, can prevent, if enabled, rotation with locked device
#poweroff180(0|1) - if not present = 0, determine interpretation of rotation to 180, 0 - rotate screen, 1 - power off.
GSen can indicate self state,
you can setup it with this commands:
#show(0|1) - if 1 GSen will show one pixel (by default) indicator on top bar.
#x(X),
#y(Y) coordinates of this indicator, default X=240,Y=1
#clr(R,G,B) - color, default white (255,255,255)
you also can setup width and height (#width(W), #height(H))
Commandline parameters:
#load - load app, if loaded already - exit without questions
#unload - unload app
#toggle - if loaded will unload, otherwise will load, usable with one shortcut
#about - show about window
if you start without parameters - program will ask "Unload?" if already exist one instance, or simple run if not exist.
NOTE: some programs, like Teeter game, cannot start in landscape mode, so switch to standard display orientation before.
Cheers
Yep
... I did.
First time I installed it I changed someting in the configfile as advised. But it doesn't work so in uninstalled and reinstalled it. Then started the prog.
SOMETIMES the picture turnes but not everytime.
I've got a HTC Touch Diamond :-o Shouldn't be the problem i guess...
Okay...
I just changed timeout to 5 and it works just fine on HTC touch HD
Guess it shoudn't be a problem on Diamond.
What is the Contacts program name?
In the GSen Configuration file, I want to be able to tell the program to leave the Contacts screen alone (to not rotate). The only problem I have is that I don't know the actual program name for Contacts, and where is it located?
Thanks,
Peter
Got it ...
I figured it out. When I entered the following command into the GSen configuration file:
#windows(Contacts)
It didn't work because I didn't first save it. Now that I've entered it again, and then saved the file, it works.
Peter
Is there any way to set it to rotate the Today screen? I'm using the default config and all programs rotate apart from Today.
Steeph said:
Did you read the readme.txt file that came with gsen?
Works fine on my HD
Here is a part of the file:
1. Description
Auto-rotate screen on SOME devices with g-sensor.
Install GSen and run it.
If you run it again, program will ask you "Unload program?".
If you answer yes - program will be unloaded.
This also possible without question with parameter #unload.
You can use configuration shortcut for edit configuration file.
This file can include this command:
#window(text or class name) - add window description
#timeout(value) - default value 1000 ms
#onlyfor(0|1) - if 0 auto rotate work for all programm except defined by #window, otherwise ONLY for this program.
By default program not rotate screen if Manila or Teeter is foreground application, but you can edit this list.
#fdscreenoff(0|1|2) - if 1, program will switch off screen if you put device with screen on bottom, if 2 device will suspend.
#lockscreen(0|1) - if not present = 1, can prevent, if enabled, rotation with locked device
#poweroff180(0|1) - if not present = 0, determine interpretation of rotation to 180, 0 - rotate screen, 1 - power off.
GSen can indicate self state,
you can setup it with this commands:
#show(0|1) - if 1 GSen will show one pixel (by default) indicator on top bar.
#x(X),
#y(Y) coordinates of this indicator, default X=240,Y=1
#clr(R,G,B) - color, default white (255,255,255)
you also can setup width and height (#width(W), #height(H))
Commandline parameters:
#load - load app, if loaded already - exit without questions
#unload - unload app
#toggle - if loaded will unload, otherwise will load, usable with one shortcut
#about - show about window
if you start without parameters - program will ask "Unload?" if already exist one instance, or simple run if not exist.
NOTE: some programs, like Teeter game, cannot start in landscape mode, so switch to standard display orientation before.
Cheers
Click to expand...
Click to collapse
i dont understand any of this talk.. if you go into the gsen edit screen, are those what will not rotate? eg, i would like to see the settings screen rotate, how do i add that? would it be something like #window(settings.exe)
I use Chronos (a clock program) as my screensaver. I also use Spb PocketPlus for my home screen rather than the stock HTC home screen.
I'm trying to find the command in the software that invokes the screensaver so I can put a link to it on my home screen. I cannot find anything that works in the Windows folder (like scrnsaver in XP).
I also use TweakHD, but can't find anything in there.
Anybody know where this might be found? If I activate to the chronos.exe file, it brings up the full program with the settings indicator, etc. so that I can't dismiss it just by touching it. That's why I'm trying to find the command within the OS that invokes the screensaver.
Thanks.
LeeBv said:
I use Chronos (a clock program) as my screensaver. I also use Spb PocketPlus for my home screen rather than the stock HTC home screen.
I'm trying to find the command in the software that invokes the screensaver so I can put a link to it on my home screen. I cannot find anything that works in the Windows folder (like scrnsaver in XP).
I also use TweakHD, but can't find anything in there.
Anybody know where this might be found? If I activate to the chronos.exe file, it brings up the full program with the settings indicator, etc. so that I can't dismiss it just by touching it. That's why I'm trying to find the command within the OS that invokes the screensaver.
Thanks.
Click to expand...
Click to collapse
screensaving with pdas means switching off the screen. you will not have much fun with a device that is switched on all the time, because your battery will be drained in less than a day. so there´s no switch to use to activate a screensaver like at your computer at home