Related
Hi guys...
have u seen this?
http://www.bluetake.com/products/BT420EX.htm
And now the question
Can u please have a look for me at the compatibility page... does that means anything for the XDAII?
Of course I mean as far as working as phone is concerned... of course the stereo audio would play.
Do any of u have or have tried the headphones? Do they work with the XDA in phone mode? Could they work?
If you don't know I would play guinea pig and order now!
Thanks,
Chris
from what the page says then it looks like will not be connecting to the xda2 using bluetooth but you just plugin the at minijack and the xda see it as a normal headset
and then the little box sendt the info to the headset
but of cause this would require you to use a minijack 3.5m to 2.5m converter
and you would not be able to use it for phone calls
Thank you... but why?
Dear Rudegar,
can I ask you why?
I do understand I would need the minijac converter and I would not be able to use the wired bottom for phone calls, but I tough I could still use the headset connected via BT for the phone call just as I did with my SE HBH-35 (before I lost it...).
Why you think I would not be able to use via BT? If I use BT tools?
Thanks!
Chris
it all comes down to how they made the device really
as i see it the headset connects to the box which connect to the minijack
maybe you can connect the headset directly to the bluetooth and not use the box
but the headset dont seem to have a mic
and the microsoft bluetooth stack dont support streaming audio over bluetooth from what i understand
as i see it then it dont matter if the headset is using bluetooth at all it could use any protocol to talk with the box
not sure about this but i do recall reading somewhere that the headset in the article does NOT work with the xda2. not sure if it's through this forum or another article. now if another chap could find that article somewhere...
a mate of mine living in hong kong tried using this headset with his xda and the bluetooth didn't work...unless of course he was doing something wrong so don't peg it on me
given that the bluetooth headset does not work with the xda2's bluetooth; the reason the converter may be needed is because the dongle might have a built-in 3.5mm jack. the xdas use 2.5mm jacks; thus needing the 3.5-2.5 mm converter. once you have the converter then basically you have the dongle piggy-backing on the xda...reminds me of the time i used a jabra bt with my xda1; the headset had an adaptor for non-bluetooth phones...downside was that you had the jabra dongle piggy-backing. the same could apply for the bluetake headset. you would need the dongle to be connected to the xda in order for the bluetooth to function.
i also recall reading that the bluetooth of the xda2 does not support wmp...
cheers
-r
Bluetooth Adaptor & headset
Have a look here http://shop.sbs-power.it/commerce.asp?sel=20&sel2=79&s=2&app=307
If you are looking for a Bluetooth headset for non Bluetooth device, this could be the solution!!!
Thank you, let me expain better!
Thanks to u all for all the replies to my question.
Let me be a little more spefic. There are 2 parts to how this headset works:
1) As a stereo headset connected via BT to the company's little box that connect to any 3.5 stereo jack (no matter what they are for... stereo, ipod, or XDAII bottom plug with an adapter).
For this use I have no dubt it would work since the 3.5 jack is same for everybody
2) As a headset (it supports both Headset and Hands-Free profiles) to pair with the XDA II as I would do with my SE HBH-35 for use as a phone only.
Would this bit work?
Thank you!
Chris
Rudegar:
"as i see it the headset connects to the box which connect to the minijack"
Correct for function 1
"maybe you can connect the headset directly to the bluetooth and not use the box"
My understanding is that u do this and through this connection u can use the headset only as a phone oyu need to ALSO connect to the box to also get stereo sound
"but the headset dont seem to have a mic"
It does
"and the microsoft bluetooth stack dont support streaming audio over bluetooth from what i understand"
It doesn't matter. I hope I would get audio streaming from the bottom 2.5 to 3.5 jack to little-box to BT to headset
AND
the phone function connecting the headset in (Headset or Hands-Free profile) to the XDAII. The only think I care about the stack is that it pairs with the headset in phoneheadset mode.
"as i see it then it dont matter if the headset is using bluetooth at all it could use any protocol to talk with the box"
Correct, but I still need the headset to be BT compatible with the XDAII to use function 2
Robson: thank you, I wrote the maker asking if there are any known issue with the XDAII
but lets say i'm riding a bike listening to music using the box
and the phone rings would the device automaticly drop the connection to the box and use the bluetooth bond to my xda2 to let me answer the phone ?
have anybody tried to connect a 2.5m headset the one that comes with the device and then bound a headset and see if the 2.5m headset interfear with the bluetooth when it rings ?
"but lets say i'm riding a bike listening to music using the box
and the phone rings would the device automaticly drop the connection to the box and use the bluetooth bond to my xda2 to let me answer the phone?"
I understand that by device you mean the headphones. I am not sure if it drops the connection or not, but u here the ring and when u answer it stops the music
I have attached the manual I found on the website
would be pretty cool to see a test of it with xda2 and maybe an ipaq so one could see if it would be even cooler if you were using the non ms bluetooth stack
I bought it!
I bought it!
I will let u all know if it works once arrives... I will have one week to test it or send it back.
I don't know if it would work much better with an Ipaq... as far as I know you can't get stereo audio out through BT from an Ipaq either...
i believe that the ipaq's bluetooth stack should support it but i'm not 100%
some guy in this forum did manage to get audio from his pc to his bluetooth headset but the quality was pretty poor
http://www.expansys.dk/product.asp?code=114076
the imate and xda2 and such are listed on the compatible list of this headset
but just how compatible we'll see when you or somebody else get hold of one and try it out
F**k what I said, it don't means s**t now...
Hi guys... got it yesterday... returning it today...
Qucik summary:
1) It worked fairly well as stereo headphone with the included box
2) It paired with the XDAII, but the audio was very ppr with a lot of eco and the botton to answer or close the call did not work with the original BT (1.52) nor with BT Tools.
Sorry guys....
wonder if it would have worked better with the WidCom stack
Did you try contacting their tech support at all? Usually companies with a new product like that are willing to work with users.
Yes I did
Yes, I did contact them:
Date: Mon, 16 Aug 2004 06:07:09 -0700 (PDT)
From: Christian
Subject: Compatibility with XDAII
To: [email protected]
Hi!
Can I use the i-PHONO BT420 EX Hi-Fi Sports Headphone Kit with an XDAII/iMate/QTek2020/OrangeM1000? (They are different names for the same pda/phone produced by HTC).
Are there any known issues?
Let me expain better myself:
1) I know and I am aware I cannot get stereo audio out of the PDA through BT from any application unless I connect the stereo jack to an adapter that get me to a 3.5 jack to connect to the BT transmitter box
2) What I would like to know is if I could pair and use the headphones with the BT of the the XDAII just for the phone part (as I would do with any other BT headset), so getting the mic and speaker to work
Thanks,
Chris
I go no answer... in the mean time I managed to buy, receive and send it back.
Hi cchris
Here you have one working Bluetooth stereo headset.
I have bought it for 1 1/2 month ago and works great with the Xda II
Here is the link.
http://www.sonorix.com/~tven/eng/product/product_bap.php
It work as a bluetooth headset with a 128M mp3 player.
If you listen to music and if you receve a call the the mp3 goes down and you can answer the call.
You receve a USB Dongel witch you can connect to the PC and listen to stereo music t ex.
Regards
Josef
Sounds Great but...
Thank you JoseF!
It sounds great!
I believe u mean the BT Headset on the link given (the BT Stereo Headset is reported as not yet available)
If I understand u correctly, by saying it works great with the XDAII you mean that it pairs. Can I ask a few questions:
-does it has a botton to push to answer/close phone calls, and does it works with the XDAII?
-is there a way to also get the stereo sound from the XDA? I don't care if I need to use dongles or third part audio to BT things... but can I do it?
I just bought a 1GB SD card, I don't want to carry a separate device for MP3, I would like to do everything from the XDA, also get the audio from the movies I play with the thing!
Thank you!
Chris
P.S.: By the way where did u bought it/where do u think I can get the best price for it?
Hi Chris,
does it has a botton to push to answer/close phone calls, and does it works with the XDAII?
Yes it has a botton to push to answer.
-is there a way to also get the stereo sound from the XDA? I don't care if I need to use dongles or third part audio to BT things... but can I do it?
No,not at the moment, It will be possibel in the future.If sameone can make the widcomm stack to work (h6315).
I dont know if the device is available at the moment.I have a friend that bought one in Januari,It was just 64M storage.
I bought mine in Juli , They have change the storage to 128M.
If you are intrested contact khcoi . Take a look at FAQ at http://www.sonorix.com/~tven/bbs/rboard.php?id=e_qa
Regards
JoseF
Hi Everybody,
I am using the X01HT which running with
Rom : 2.05.255.1
Radio Ver. 1.34.00.10
The problem is my friend said that my speech sound very poor (the background sound very strong )
when my phone is connected with the BT Handfree.
Just wanna know how the chase the problem is from my handfree or my phone.
furthermore, Is it possible to check my handfree is running real A2DP (Stereo sound )
my Handfree info: http://www.itechdynamic.com/en/products_spec.asp?cid=2&pid=02050
sorry for my poor english
Your english is fine
This not an area I know much about but the following may be of use:
http://forum.xda-developers.com/showthread.php?p=1152585&highlight=sound+quality#post1152585
HtweakC Link
http://www.fit4cat.de/thread.php?threadid=263
Try using search as there are several posts on this kind of problem.
Mike
You can check A2DP by playing a song that is in stereo. Anything with an obvious sound in the right channel will do, as if A2DP is not working it will only be playing in mono.
Also, the little icon in the taksbar will show a headset with a music note inside of it if A2DP is working.
The sound problems you mention are probably due to the quality of the headset. Try it on another phone or try a different headset on your phone.
I am using the same ROM and radio and my BT works great. (AKU 3.3)
I use both the Nokia HS-12W and a HTC BHS 100.
A2DP will give true stereo in WMP10. Strange I found the Registry still set to mono, so I had to change that for stereo.
The call quality both incomming and outgoing is great with these headsets as well.
The HTC also allows you to use your favourite earphones as well.(3.5mm jack)
Hope this assists.
Thanks
Thanks all first.
Yesterday, I did some stupid test about the voice quality,
I used the recording function in Note to record my own sound near the TV in my home, and found it was not bad.
However, then I went out use the BT headset again, but my friend said, dont use it again, my sound really poor
After that, I bought a BT dongle to try to test my BT headwith in my computer, but the Dongle comes with the bad BT management Driver, called XTNDCoonect Blue Manager.
Do you all have the widcomm software and send it to me ?
I dont know it is against the policy in the forum.
Hi everybody!
I've used several Nokia Symbian devices before my TouchHD and I've always used them with onboard navigation together with a bluetooth carkit.
Nokia 6600 + Parrot CK3500
Nokia N80 + Parrot CK3500
Nokia N80 + Parrot LS3400GPS
The great thing of this combination was, that every voice command from my navi software was transmitted over my car speakers and the radio was muted!
But with my Bury CC9060 and my TouchHD this great feature doesn't work!
1. Is there a special bluetooth protocoll needed?
2. How can I make sure wether it is the blackstones or the carkits fault, that I don't get voice commands over the car speakers?
3. When I start the MP3 Player in Manila the bluetooth carkit also keeps silent.
Nobody? Here are so many WM experts. Someone must have an answer!
Hello
What version of software are you running in the cc9060?
The latest is v1.74 and this works well with the Touch HD, all contacts are there only battery power level is not working on mine.
The problem you have might be that the car kit connects by default on A2DP and trys to output sat-nav and music via this, if you do not have the cc9060 connected to a aux input you will not hear the audio.
To get around this you can always disconnect the A2DP in the options of the phone ,Comm manager>Settings>Bluetooth>cc9060> then untick wireless stereo
then audio will come out of phones loudspeaker
I have my Touch HD and cc9060 connected to my Focus aux-in and use it as music player while running TomTom, the phone then overlays sat-nav directions over playing music they work well together, the touch screen music controls work well with manillla player and allow control of music without interupting tomtom
If you need to update cc9060 you can get new software from bury's website at
http://www.bury.com/en/hands-free-car-kits/system-bt-bluetooth-systems/cc-9060/software.html
hope this helps
CC9060 Software is already the latest: 1.74
I found these checked bluetooth options:
Wireless Stereo
Hands Free
I'll give that a try and uncheck Wireless Stereo!
Do you already know, that bury will release an actice cradle for the Touch HD in June/July 2009! Then I am able to load the battery while driving.
Update:
With unchecking bluetooth stereo, the navi software uses the phone speakers, whereas it is connected to the CC9060.
But there are still two disadvantages:
- Radio ist not muted when a call comes in.
- Not as loud as the car speakers
I've written to bury and they've answered me the same:
The device must be connected to AUX to hear something over the car speakers.
One question is still unanswered:
What is the reason, that Nokia devices where able to transmit the navigation commnands over the car speakers?
Bury mentioned, that the handy must support this!
Hi Pal
I have the parrot Ck3100 and it would play the sat-nav commands via the stereo speakers with my N95 but won't with the Blackstone. So it must be WM or the Touch HD that is not sending commands to the carkit. I also noticed that with my N95 when I got a text the sms alert was played through the car speakers the touch Hd does not do this.
Hope that helps and if you find a solution I would love to know.
Sully
Damn! Is it the handy operating system or the handy-brand?
As you mentioned already your symbian device is doing it right. But the WM6.1 device fails!
Maybe I should test it with the new omnia HD (also symbian OS) if it works!
Please report back if you find ourt anything more, I am sure it must be possible maybe with a reg tweak.
Sully
At the moment I don't see any possibilities to get that to work.
The manufacturer of the my new bluetooth car kit (bury) said, that it is very seldom, that a mobile phone sends navigation commands to the carkit. They are also not testing this feature, when they are adding a mobile phone to their supported phones list.
Should't a carkit in handsfree mode work as a headset?
Even Parrot was unable to say which device is generally sending every sound to the their carkit. But they said, that their carkit is reacting on EVERY activity from the mobile phone, when it is in handsfree mode.
We need more feedback from carkit / navigations users to finde the weak point!
Hi Pal
Just been reading about vjvolubilis and btmusic and some diamond users have managed to make it work. I have just installed it and will try it out on the way home tonight.
Sully
hungabunga said:
Hi Pal
vjvolubilis and btmusic
Click to expand...
Click to collapse
So those are the right apps? Are they free and maybe also available here?
I could test them, too.
they are free to use, i had some success with vjvoubilis. it worked but kept muting the stereo even though there were no commands from tomtom. for btmusic you need .net
sully
btmusic wants to have 2.0. But in my Rom .net 3.5 is already included. Does it work with you?
EDIT: After installing v2.0 via activesync btmusic starts but then a message "license expired 01/09/2008" appears.
I had to download .net 2 to make it work, the phone still works fine after installing version 2 and I am running duttys 2.7rom. Link for .net2 found on this page under requirments http://maxmobilesoft.com/index.php/software/btmusic
Sully
I thought in v3.5 v2 is icluded.
Get it to work now, too. But:
How did you solve the license expired message? Setting back the system language is starting the programm but not a solution for always.
use the link I provided above, you have to register to download but that version doesn't have licence problem.
Sully
Thanks a lot, but I've registered now, too. The app works.
But I am to tired to walk down to the car and test it. Maybe in a few hours after sleeping for a while.
go to sleep man and check it in the morning, there is no rush.
Sully
i cant get my hd to work with my intergrated bluetooth either.
i have tried software call JETware, that many people talk about... still my phone will not ask for the pairing passcode(password or key).
Any help would be great.
thanks
btmusic didn't solve my problem.
Igo8 did not talk to me via bluetooth and the manila music player, too.
I had an O2 Flame and i use plantronnics bluetooth headset support A2DP works fine. I can use it to listen to musics and doing phone calling with the device..But then, i bought the HTC Touch HD and i want to use the headset as well in my new device. I had turn off the headset connection with the flame and test it alone with the touch. But it seems my HD can't detect my headset as well..I'm experiencing problem that my HD unable to detect my BT plantronnics headset. Is there anyone had the solution for the problem ??? please help me..
If possible, i don't want to change my headset ...thx
BishopForce said:
I had an O2 Flame and i use plantronnics bluetooth headset support A2DP works fine. I can use it to listen to musics and doing phone calling with the device..But then, i bought the HTC Touch HD and i want to use the headset as well in my new device. I had turn off the headset connection with the flame and test it alone with the touch. But it seems my HD can't detect my headset as well..I'm experiencing problem that my HD unable to detect my BT plantronnics headset. Is there anyone had the solution for the problem ??? please help me..
If possible, i don't want to change my headset ...thx
Click to expand...
Click to collapse
i hav the same brand the long sleek one blk one that has the buttons for music on the headset i connect to the device with no problem... try wen u turn on bt and search for the headset with the head set powered on try linking to the device from the headset first
Thx bro, but still no effect..should i use the WM6.5 roms?cause i'm using WM6.1 WWE 1.59 Rom Official ASIA ROM from HTC.should i also upgrade the radio and BS ril phone as well?is there any effect??I'm currently usingPlantronics Voyager 855
I've spent days searching and trying all sorts of tweaks but I can't get anything to work. Can anyone PLEASE help!
I use Tomtom 7 and I've always sent the voice instructions to the bluetooth speaker in my bike helmet (just a handsfree paired item). I've previously done this on HTC devices with BTAudio and a one line registry tweak. Can anyone offer a solution to send all the audio to a bluetooth handsfree on the HD2?
I really hope someone can help, I've got the HD2 setup just right except for this last remaining item.
Many thanks,
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
xardus said:
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
Click to expand...
Click to collapse
Yes I've tried the "manage system audio in handsfree device" option. I can get some background noise on the headsets (I'm trying with a Scala Rider and Motorola 700 & 850) but I never manage to get any sound.
Can anyone please offer a solution? It's a big disappointment for me if this isn't possible. Any suggestions welcome, many thanks.
My Observations
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Fadetogrey said:
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Click to expand...
Click to collapse
It gives me some hope that you've got it to work with one bluetooth device. Can you please let me know exactly what you did to get the $20 bluetooth earpiece to work?
Thanks,
yeah that was my idea but without a stereo bt device i cant try to myself...i ordered to vodafone one with some of my tons of points...3 weeks and no answer!
I had the same issue and on my old phone, the HTC Touch HD, I used the following program to my satisfaction:
BTAudio
On my HTC HD2 however this doesn't seem to work anymore. :-(
it does the same thing of the inbuild bt option on hd2 its just a "quick link" to place on the bar
anyone of u have any problem with bt device volume? before i have an Artemis and 3 different device i used the device volume was every time the one i choose...now every time a new call starts phone volume its right but device volume jump to minimum level and every time i have to press + button like as i'm playing videopoker to dont miss fist seconds of a conversation
Works fine with Jabra 3030, all audio over it, music, system sounds and calls.
Maybe it's only working for bluetooth devices that are setup as stereo. Can anyone please offer a solution here?
I've installed a 6.5 rom (dutty v7 - thank you) on my HD and after a sprite restore (level 2) bluetooth audio divert works fine. Although I notived that the bluetooth options remained the old settings (possibly due to my backup restore) and the divert was done using the BTAudio. Sorry to keep asking but if anyone can shed light on this.
Is it possible to tweak the HD2 so that audio can be sent to any bluetooth headset/handsfree or is there some hardware limitation that stops this from being done?
I've tried every app and tweak that I can think of! Please can anyone help, even iof it's to let me know why this can't be done.
Thanks,
its what we all are trying to do......now i think its only a bt device problem...if it support bt2.1 and a2dp with edr seems to work all good....
i solved in car with headphone in the box...but bluetooth should be much and much better without any cable that always have to remove nodes (its the right word? sorry if not hehe)
I'm connecting to my HD2 using Jabra Stone, an A2DP headset. When I selected the stereo headset profile on the HD2, it redirected all system sounds to the headset: reminders, SMS alert, soundtrack for videos, audio player....except phone ring. I used BT Audio over a non-A2DP headset before with Diamond2, but the ausio is very poor, and the connection drops very often. Since I changed to A2DP headsets, the Diamond2 and HD2 supports it out of the box - no hack needed.
So look for A2DP headsets if you want to redirect audio.
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
I have an LG HBM-220 bluetooth and cannot put audio to in, only phone calls!
How can i manage to do it?
I blame it on the stupid Widcomm Bluetooth stack... If the HD2 used the better MS stack, BT would play nice with with more of our periphirals and apps
I can't use MSVC properly with BT either....
the solution is to go to the bluetooth settings, select your device and connect the stereo audio connection.
Way back, Microsoft decreed that ONLY the phone app could use a mono BlueTooth headset, although any audio could be redirected to a stereo A2DP headset.
In order to get around this you need to fudge the sytem with something like BTAudio or TekSoft's BlueAudio.
The latter worked on my XDA Orbits (1 and 2) but does not work on my Touch HD with Dutty's R6 ROM (WM 6.5) possibly because BlueAudio requires the Microsoft BlueTooth stack and I suspect Dutty's ROM has the Widcomm stack. But I could be wrong about that.
BTAudio sort of works on my Touch HD, but outgoing audio is speeded up like I've been breathing Helium.
So no current solution to yet another idiotic gotcha from Microsoft.
Noony said:
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
Click to expand...
Click to collapse
Hmmm. When I conect via gprs to youtube aps I can hear the voice in my mono headset (jabra 2020) but via wifi and computer as modem voice is only in phone speaker. So maybe we should look gprs or youtube aps reg tweek.
Guys
i have a nokia HB-100 headset and i'm experiencing all kinds of strange behavours
sometimes system sounds including music ...etc get directed to the headset and some other time it just directs calls no matter how hard i try thru soft resets or unchecking then checking the "play system sounds ..." option!
very strange, any insights about this? is there a tweak to go with or is it a known WM defect?