Problens 2Gb card A9100 !!! - 8125, K-JAM, P4300, MDA Vario General

A9100 does not recognize my 2GB card i install this supplement "SDHighCapacity" but he will recognize the device turns off the WIFI.
how to solve this?
he recognized the card and run the WIFI?
VLW
Note I have the ROM BlackDiamond 3.1 Touch
Qtek A9100 G4
thanks !!!

my Wizard is able to read 2GB MiniSD card without any program.. Have you formatted it with PC before?

yes, my Qtek A9100 recognizes MiniSD CARD 2GB,but i have a 4GB SDHC Card
which is not recognizes.
i have alredy installed the "SDHighCapacity" and it is working now(he reads the 4Gb SDHC card).But when I intall it my wifi is desable and i can not enable more.
I have done a soft reset its nothing dont work wifi
What could be causing this problem?

Related

sandisk sd card 2gb and qtek s100

I just bought a 2gb sandisk sd card
it is recognised by the magician but each time it switchs to stand by mode the "memory card" file disappears...So I have to take it out and to insert it again (two times) in order to see it again.
Is it normal ? or there's a problem with this card ?
thanks
:shock:
up
Good to read, Storage to the people!
Take a look @ the card params too. Somehow a magician communicates better with a fat(16) card than fat32.
Have fun, M
thanks for your comment...
I can only format the sd card with the magician because i don't have a sd card reader for my PC. But with the program I use (FORMAT) I cannot choose FAT 16 or 32 - do you know a soft to do this ?
PHM Pocket Mechanic is very good for this, available on trial
I just received my Sandisk Ultra II 2GB card and it's working fine with my S100 (1.12) and I didn't have to format it when I received it.
However I have just come upon a problem. The card works fine in my S100 and I can copy files to it via ActiveSync. In order to speed things up I just tried putting it in the card reader in my laptop which reported it as unformatted...
Got the Sandisk Ultra 2 2GB for my M500 and it works fine in the phone , my card reader however does not like it either.
However i have sd-cf adapter that i use with my camera , i sloted the sd card in to that and in to the card reader and it works fine at very high speed.
Hope that helps.
C.
Laptop doesn't have CF and I'm reluctant to allow it to format the card in case I suddenly have issues reading it in my S100. :/
hi, i ran a benchmark in my 512mb SD card (unknown brand - missing logo) with pocket mechanic and the results are: Read 5.1X and Write 0.6X. Is it bad?
ok my card reader on my laptop and my S100 must talk a different dialect of SD card because no matter what I do they can't work together.
If I format the card in my S100 and copy files via activesync the laptop reports the card as unformatted.
If I format the card in my laptop and copy files on my pocketpc can't see them.
Size doesn't fit to 2GB Card
Hi I just got my sandisk ultra II 2GB SD Card and at first it worked fine.
Magician recognized it as 2GB then i copied some files from my computer with my SD Card Reader. But after inserting the card into my magician i got some weird looking characters, files, and folders. So I inserted it again in my SD card reader and formatted the card. After that my pc and my magician doesn't recognise the card as 2GB anymore just 1GB .
Any help to solve this problem and to get my 2GB back ?
I too facing the same problem it is detecting as 1 GB instead of 2 GB also the after formatting sd card in card reader made i unformated for ppc and viceversa dam,anybody have a solution for this ?

Mini SD Card not showing correctly

All,
I have a 2gb Sandisk Mini SD Card in my Qtek 9100 and up until today its been working fine. However my Qtek started to behave strange today and suddenly would connect to my pc via ActiveSynch nor could it read the sd card.
Well in fear of loosing all my stuff on the sd card I tried in other phones, on another pc, in my camera....jsut to save it but I couldnt.
I ended up doing a hard reset of the Qtek since I couldnt solve the ActiveSynch issue and now its up and running.
BUT.....my SD card is only on 1gb now. :-( So what can be done ? Format it....yup but I dont have any program to do it with....
Help help help....the next step is to send the sd card back to the company I bought it from but then I'll have to wait for a new one
Please help
Jakob
Well I have just formattet the storage card with StorageTools and when I have the card in my qtek it shows 1gb
But if I put it in my camera and then connect it to my pc I see 2gb....
i had problems on my card and formated using wm5torage from the desktop...and it is working flawlessly, i suggest to do that...but usually that size problems happen in fake cards...do u filled the card some time or at least passed the 1gb limit?

memory card problem.. not installed

I use atom with sandisk 2gb memory card. i have formated my card with pocket mechanical Pro. software with it's default settings.
now in file explorer and storage place it says memory card is not installed.
i did soft and hard both reset. upgraded my rom again as well.
but helpless..
any solution guys?
Try using Resco Explorer or SKTools to format the Card in your Atom
problem solved.. i did install memory card in computer and formated it with FAT system... n it worked for me...
^does file explorer show its correct size?^
Hey guys I have also developed a problem with my memory card Sandisk 2 GB. I upgraded my Atom Exec today in the morning to the great WM6 AKU 7a of chartreux after install when I inserted the card my atom did not respond. I tried the card through card reader on my PC and it was working perfectly. Then I tried another 2 GB card of Kingstone (one of my friends) but my Atom Exec did not read it. I flashed the old original ROM from O2 but even then my Atom Exec is not reading the card please Help.

Cannot detected anymore the MiniSD card

Hey everyone,
For some reason, my HTC P3600 cannot detected anymore the MiniSD card.
It's weird, because the pda have used to run the MiniSD with TOMTOM and MP3 Files.
So, I checked my MiniSD on my laptop and everything is fine. I can read and write on it, and the 2 giga are well detected.
Has anyone have an idea about it ?
Thank in advance for your help.
Sylum
______________________
HTC P3600
MiniSD Corsair 2G
WM6
Try to copy everything in your memory card in a folder on your PC; format memory card and copy everything you saved.
you must use a memory card reader.
Hey guys,
How do you format your mini Disk card?

SDHC Card Driver

Hello,
when I plug in my 8GB SDHC Card in my Touch 2 Phone, I can't see it :-(
I remember....with WM6.1 I installed a SDHC driver, then it worked perfect.
Is there any driver for WM6.5 available?
Or how can I fix this problem?
Kind regards,
Philadou
htc mega recognizes 32gb sdhc by default. i think ur card is faulty
Empty your card and re-formatting may help.....
ok, thanks.....i tried another card....sandisk works fine

Categories

Resources