Well guys i know theres a lot of people here that have had problems with the new panel manager from R3a on R2A roms and were fed up with it. I too had a very bad problem, i installed the new panel manager and it cause conflicts with S2U2, so much that the panel stoped working, even after i had uninsnce i had talled S2U2 panels would not start or when they did they froze up. Now i really wanted the growing panel and the cnn panel, and was willing to dish them but a hard reset was not what i wanted.
So i tested the following and it works!!! to perfection!! Now since i had made a backup of the old panel manager, i went ahead and took the old panelmanager.exe and droped it inside the panelmanager folder, overwriting the new exe, and all of a sudden all my panels work like before, but faster smoother and best of all ccn panel and growing panel work!!!! And it now has no conflict whatsoever with S2U2!! just marvelous!!
If trying this out, remember to make sure that Panelmanager.exe process is killed beforehand or it wont let you overwrite the file. To do this use a third party task manager that will do the job.
anyone having problems with R3A panel manager and wants new panel requiring New panelmanager, give this a try and post feedback, i know for me and a buddy of mine it just revived our X1s.
Old panelmanager.exe is atached for those that want to try it. Now i have a LAM rom(spanish) so dont know if it will work on others. Just extract and replace the new one with this one.
There's a cab for the old panel manager inside the windows folder. All you needed to do was run that to install over the new one.
prking07 said:
Well guys i know theres a lot of people here that have had problems with the new panel manager from R3a on R2A roms and were fed up with it. I too had a very bad problem, i installed the new panel manager and it cause conflicts with S2U2, so much that the panel stoped working, even after i had uninsnce i had talled S2U2 panels would not start or when they did they froze up. Now i really wanted the growing panel and the cnn panel, and was willing to dish them but a hard reset was not what i wanted.
So i tested the following and it works!!! to perfection!! Now since i had made a backup of the old panel manager, i went ahead and took the old panelmanager.exe and droped it inside the panelmanager folder, overwriting the new exe, and all of a sudden all my panels work like before, but faster smoother and best of all ccn panel and growing panel work!!!! And it now has no conflict whatsoever with S2U2!! just marvelous!!
If trying this out, remember to make sure that Panelmanager.exe process is killed beforehand or it wont let you overwrite the file. To do this use a third party task manager that will do the job.
anyone having problems with R3A panel manager and wants new panel requiring New panelmanager, give this a try and post feedback, i know for me and a buddy of mine it just revived our X1s.
PRK.
Click to expand...
Click to collapse
Have you tried it with the new media panel? That is the real test as the growing panel can work with the old panel manager as soon as you have flash installed. I don't know though about the CNN panel.
the New media panel opens but doesnt work, just keepslagging, the cnn panel works 100%. I read somewere the cnn panel requires new panel manager, so im happy with growing panel and cnn panel working with S2U2 at the same time.
I really dont use media panel at all, never have, never will. the panels i use most are facebook panel, and the cnn panel now. For media i use Kinoma Play and that beats any media panel hands down.
Old media panel works just fine.
Hmm... didn't know S2U2 doesn't work with the new panel manager. That's gonna hold me back from upgrading in future.
Can someone please upload the exe. I would like to give it a try.
ipporek said:
Hmm... didn't know S2U2 doesn't work with the new panel manager. That's gonna hold me back from upgrading in future.
Click to expand...
Click to collapse
ajajaj neither did i or my friend till our panels stoped working afetr s2u2 installs, and even after uninstalls, it seems that s2u2 breaks something in the process or leaves something behind causing conflict. not sure. oh i was using latest s2u2 by the way.
ipporek said:
Hmm... didn't know S2U2 doesn't work with the new panel manager. That's gonna hold me back from upgrading in future.
Click to expand...
Click to collapse
ajajaj neither did i or my friend till our panels stopped working after s2u2 installs, and even after uninstalls, it seems that s2u2 breaks something in the process or leaves something behind causing conflict. not sure. oh i was using latest s2u2 by the way.
hypoh said:
There's a cab for the old panel manager inside the windows folder. All you needed to do was run that to install over the new one.
Click to expand...
Click to collapse
Just curious, where exactly is the cab for that? What is it called (filename)? I looked at all the cabs in the windows folder, but didnt find one that looked like it. I'd really like to find it though, if it's there.
AF241 said:
Can someone please upload the exe. I would like to give it a try.
Click to expand...
Click to collapse
here you go buddy. let me know if it works. Ive attached it at first post, enjoy.
Xuanlong said:
Just curious, where exactly is the cab for that? What is it called (filename)? I looked at all the cabs in the windows folder, but didnt find one that looked like it. I'd really like to find it though, if it's there.
Click to expand...
Click to collapse
yeah i need to revert to the old one. where is the cab file and name please?
thanks
mxp..etcetc...cab
Nice try, but that's not it. That's the media xperience panel.
My mistake; I remembered wrong. The cab I used was for the old MXP, and to revert back to the old panel manager I used a backup of the folder.
prking07 said:
here you go buddy. let me know if it works. Ive attached it at first post, enjoy.
Click to expand...
Click to collapse
Thanks buddy. I have tested with this the whole day and I didn't have any problems with the WM6.5 unlock screen yet. With the newer version it would show the today screen (putting the unlock and password screen in background) every now and again and the phone would freeze. Same thing used to happen with s2u2 as well. And this used to happen quite frequently as well.
AF241 said:
Thanks buddy. I have tested with this the whole day and I didn't have any problems with the WM6.5 unlock screen yet. With the newer version it would show the today screen (putting the unlock and password screen in background) every now and again and the phone would freeze. Same thing used to happen with s2u2 as well. And this used to happen quite frequently as well.
Click to expand...
Click to collapse
Yeah i had tons of problems with S2U2 and new panel manager also. But now is just works! and best of all you can have the cnn panel and the growing panel working. The new media xperience panel is not working but thats fine with me i jus have the old one installed. cnn and growing were the most important to me anyways. glad i was of help.
well just have to wait if a future version of S2U2 comes out that adresses this or a newer panel manager.
sorry what third party task manager u use to copy it over the current file... ??? i have total commander will it do the job? cannot copy otherwise
amitagrawal said:
sorry what third party task manager u use to copy it over the current file... ??? i have total commander will it do the job? cannot copy otherwise
Click to expand...
Click to collapse
You could try a 3rd party explorer. I have used Resco's one for coping the new panel manager and camera files over the old ones before there were such cabs around. I can't remember though If I had the process closed with a task manager in advance.
P.s.: Total commander is a 3rd party explorer, right? Maybe it's the process you have to close if it doesn't work. I thought about it some more and I can't remember closing any processes.
I tried the .exe attached file but it didn't work
prking07 said:
Well guys i know theres a lot of people here that have had problems with the new panel manager from R3a on R2A roms and were fed up with it. I too had a very bad problem, i installed the new panel manager and it cause conflicts with S2U2, so much that the panel stoped working, even after i had uninsnce i had talled S2U2 panels would not start or when they did they froze up. Now i really wanted the growing panel and the cnn panel, and was willing to dish them but a hard reset was not what i wanted.
So i tested the following and it works!!! to perfection!! Now since i had made a backup of the old panel manager, i went ahead and took the old panelmanager.exe and droped it inside the panelmanager folder, overwriting the new exe, and all of a sudden all my panels work like before, but faster smoother and best of all ccn panel and growing panel work!!!! And it now has no conflict whatsoever with S2U2!! just marvelous!!
If trying this out, remember to make sure that Panelmanager.exe process is killed beforehand or it wont let you overwrite the file. To do this use a third party task manager that will do the job.
anyone having problems with R3A panel manager and wants new panel requiring New panelmanager, give this a try and post feedback, i know for me and a buddy of mine it just revived our X1s.
Old panelmanager.exe is atached for those that want to try it. Now i have a LAM rom(spanish) so dont know if it will work on others. Just extract and replace the new one with this one.
Click to expand...
Click to collapse
thanks,thanks
Related
http://www.freewarepocketpc.net/ppc-download-ifonz-v0-9-9.html
Quite a cool I phone looking app. How hard would it be for someone to make this a panel?
I guess really the question should be... Why don't you just buy an iPhone? My guess is this is just a today screen plugin, similar to TF3D. If that is the case, running it should be about the same at TF3D on the X1. I know some people in the Diamond forum were trying to get ifonz to work.
Jep, same thought! Go und lock yourself up with an iPhone...
i really dont get why anyone on earth likes the iphone. but whatever.
Well why not a iphone lookalike panel when the tf3d seems very popular,it´s all about to replace/complement the panels we already have onboard as i see it..
iphone is a nice phone and i cant say i havent put iphone like apps on my 6800 and thought about it for my tp but i thought again and whats the point i may as well have just gotten an iphone. its probably best to get apps from iphone (if at all possible) instead of the flashy looking ui. it gets boring after a while. not taking anything away from the people that develop those programs because its something i cant do and it amazes me. so keep up the good work but just not for me at least not for extended periods.
you could ask the author
http://forum.xda-developers.com/showthread.php?t=436656&highlight=ifonz
Does this install as a Today plugin or an app itself?
Oops... found the answer. It ain't a Today plugin. So guess it somehow replaces the today screen? And that why TS's there asking about if anyone can convert it to a panel?
I find this is a discussion worth picking up again! so has anybody put some thought to it?
I tried the latest version of ifonz ( http://forum.xda-developers.com/showthread.php?t=436656) and it works pretty good with full landscape support and loads of customisation options.
Now ... I know nothing about programming .. but is it hard to make it come up as a panel?
The way it works now it is an .exe which u need to start manually (similarly to the T3D before the panel .cab came out) ... so what does it take to get a panel .cab for this little app?
I thought about contacting the author but then again I dont see why this should be his business ... he probably doesnt even have the Xperia!
So any ideas on this?
thx
I'd think the one most able to come up with a panel for this at the moment should be the guy who did the panel for TF3D.
I tried installing the ifonz using the .exe but they mentioned about throwing an exception?
I've searched almost everywhere for an answer but have yet to find one. I still can't install iFonz on the XPERIA. I was wondering, do I download the files on the phone itself then run the exe (if that's possible) OR run it on the desktop/laptop with the XPERIA connected via activesync which I have been trying to do. But on my Laptop, I get an error that it has failed and on my desktop it says something about an exception.
no u are supposed to install it on the xperia ... maybe u r doing the same mistake that I did the first time I tried to install ... this may sound stupid but u need to copy the .zip onto your xperia and then actually extract the files before u can install them!
Reason I m saying this is because when u click on .zip after u copied it onto your xperia it will automatically change folder and show u a list of all the files that are in that .zip.
intuitively u would probably click the .exe right away however if u do this u get an error saying that the file cannot be installed for unknown reasons etc. if you however, extract the files to a folder of your choice then u can click the .exe and the installation works just fine
alternatively, u may just be needing to install microsoft net framework 3.5 which u can download for free on the microsoft website .. if you search this forum u will find a link to it ..
sorry for late reply, hope that helps
Ah thank you! Yes, I have installed Microsoft Net Framework (I did do my research haha). I will try it out now!
Okay, now that I have ifonz I realised that I don't like it. Worst of all, when I switch on my phone, it starts off in the ifonz page. And so I deleted the ifonz folder. But now, when I switch on my phone, they mention an error as they are unable to find ifonz.exe. How do I get rid of this annoying pop up?
hey guys. i was just on my xperia and found this handango app in the programs sections. so with curiosity i decdied to run it. well ir run half way and then it stopped.
now on the first panel (xperia panel?) theres the handango inhand icon on the lower right. is that normal?
i tried clicking on it and nothing happens...i try going back to programs and click on the handango inhand app again but now nothing happens.
and finally i went under the task manager to see if the handango is running but theres nothing there.
can sum1 plz explain the use of this program or how to get rid of it?!
THanks alot!! any feedback would be greatly appreciated.
just uninstall it. i knew straight away when i got my X1 that the handango thing would only gives me problem.
dont forget to deletethe handango thing in the startup thing after u uninstall it
ok. where do i go to unstal this program?
sry if im asking all this really basic questions but i just got my x1 a couple of days ago.
thanks alot for your help
Can't
If you are running the latest R2AA_10 you cannot "uninstall" Handango...per se because it has been embedded into the ROM.
You can however remove the program link from your start menu folder with a file explorer like resco and remove any startup links to it.
alias_neo said:
If you are running the latest R2AA_10 you cannot "uninstall" Handango...per se because it has been embedded into the ROM.
You can however remove the program link from your start menu folder with a file explorer like resco and remove any startup links to it.
Click to expand...
Click to collapse
im currently on R1AA017. wat version is that??
so since im in a different version..how can in uninstall it?
It seems this has now been officially released. The build is 6411. I tried but I can't find any differences between this and the leaked build.....but then again it was working fine for me with no issues.
Has anyone else seen any improvements?
You can get the trial from here:
http://spbsoftwarehouse.com/pocketpc-software/mobileshell/download.html
I found the different is... when I install this new version on my x1. The 3D accelerator option disappear.
i just bought it but cant install it yet. unless you guys can tell me how to install the exe from a mac
methodz said:
i just bought it but cant install it yet. unless you guys can tell me how to install the exe from a mac
Click to expand...
Click to collapse
Well, for starters....they let you download a CAB file from their site ;-)
funny i ordered it but didnt have the option to download a cab file. is the link you gave to the official trial version?
i downloaded the cab from your link and installed it. its da SHIZNIT!!!
hwangmax said:
I found the different is... when I install this new version on my x1. The 3D accelerator option disappear.
Click to expand...
Click to collapse
I think it's gone completely....that either means it is no longer hardware accelerated or it's autodetect as not ALL devices will support it.
in my opinion, MobileShell 3 is a flop... too many defect.
sidvizioso said:
in my opinion, MobileShell 3 is a flop... too many defect.
Click to expand...
Click to collapse
Not too many bugs or defect, to less functions!!!
oh sure....too many missing functions!
i'm not english
the only differences i have found is that the x button now works without it freezing the handset and that its a bit quicker and smoother. but have not found anything else which is a shame as i was expecting more from the offical release compared to the beta (what now seems like a near final release with one or 2 bugs to iron out).
I will try the new version and hope it will fix my Facebook via Wifi and X Button freeze bug. But like I understood Ganondolf the x button works fine what is absolutely an improvement.
Can't access Facebook...Oh boy : (
Greets
Anyone heard of panel version of Mobile Shell 3?
thelucius said:
Anyone heard of panel version of Mobile Shell 3?
Click to expand...
Click to collapse
mine fires up when i hit the today screen panel. kind of convenient for me.
ok so my first imptrssion: its awesome! has the look of cupcake (sorta) cool widgets and super slick interface.. glad the panel button wrks again
did have a few probles with the shell, seemed rather slugish if u wanted to switch back to today or exit the shell and restart it, seemed to take a while. also... anyone else notice if u added any widget regaurding the camera it did nothing.. wouldnt open at all im using R3a camera tho.... couldnt change icons at all... which is rather annoying considering the features pocket plus 4 gives u for adding/changing icons and their names..... i uninstalled due to the speed of the shell and the inconvience of the icons and widgets ..... i hope they make sum tweaks .... such a beautiful shelll. and very finger friendly
ok. P.S. and... does anyone know if you can add today plugins like widgets? this would be awesome too add google search as a widget... couldn't figure out how... thus why i reverted back to just plain old pocket plus...
just a few tweaks and it'd be perfect!!!!
yea...tried it for about a day, and i think i am going to uninstall it now. It amazed me at first, but i think the old combination of pocket plus and today plugin already does the job for me anyway...
the facebook integration here feels pretty useless too....
i have a small problem with this one.
Since i have installed spb3 , when i make a call, it automatically opens tomtom.
It is very annoying.
Anybody got the same problem?
And how did you fix it?
Thanks.
It seems that I can't add any programs of my own choice in the predetermined categories of the launcher (Internet, Tools, etc.) or add my own category. Or am I missing something? This is what made Mobile Sheel 2.x interesting and customizable. If this option really is gone I think it's a weird choice.
bartveld said:
It seems that I can't add any programs of my own choice in the predetermined categories of the launcher (Internet, Tools, etc.) or add my own category. Or am I missing something? This is what made Mobile Sheel 2.x interesting and customizable. If this option really is gone I think it's a weird choice.
Click to expand...
Click to collapse
All these changes can still be made. Adding/Deleting from the default menus needs a registry key added per folder. Subfolders can only be created in the registry at the moment. I don't really use this much but I imagine (so I don't know for sure!) that the GUI will have this functionality added in future releases.
the GUI will have this functionality added in future releases.
Click to expand...
Click to collapse
But the old version had this option as a regular function (the menu button in tab Advanced)! It seems weird that in a new version one is forced to revert to editing the registry.
Spb Mobile Shell 3
Works fine on my X1, apart from multimeadia. None of the camera links launch the camera application. Anyone else found this problem
I'm Kinda new to the forum and have only recently tried to add new apps and stuff to my X1.
There is a lot of information here about various versions of TF3D/Manilla and if I'm honest there is a little too much and I'm a bit lost amongst it all.
I should state that I have successfully installed a version of TF3D from here:
http://forum.xda-developers.com/showthread.php?t=442154
but have since removed it due to 1 or 2 issues (worst of which was really slow performance when looking at the photo albumn and not being able to see photos taken with the camera on the pictures tab). So I thought I'd ask for some advice before re-trying.
Question 1.
Which is the best version to install from a stability/features included point of view. Also I am not confident with burning a new ROM so would prefer just a .cab instrall.
Question 2.
For the install recomended is there a way to have it as a seperate panel rather than a today screen replacement. Are there any drawbacks to installing as a panel?
Question 3.
Are there any issues when switched to lanscape mode? (there was on the version I used) if so which modification would be compatable with the one recomended.
Finally if there are any other recomendations you have, for example, further modifications to make the TF3D experience more pleasurable, should I not worry about rom flashing and are there any alternatives to TF3D which could give me the polished interface i am looking for.
Cheers all
Check this post...
I had the same question, check out the below thread for your TF3D answers:
http://forum.xda-developers.com/showthread.php?t=514377
Regards
Sonny
Thanks but that leads me to one of the things i was confusedf about.
In the TF3D in Landscape mode thread it is stated that support for the app has been discontinued due to the release and porting of Manilla 2. So should I be using that? if so where can I get it?
Thanks to Sonny
Just wanted to bump this post to see if there was any other advice out there.
I did find the x-panel which look like it may have potential but just wasn't feature filled enough yet.
Cheers
Try TF3D 2 Beta 3
Ah! Just had a ton of pop-ups and now have to type all of this out again..!
Okay, will try to keep it short this time.
Try Daran_Clarke's TF3D 2 (Beta 3). It's taken from the new HTC Touch Pro 2. It includes the official HTC landscape view which works very well. You can install the CAB from here...
http://forum.xda-developers.com/showthread.php?t=448178
Some advice though. The Right Softkey function gets changed when you install this so the function is to take you to the Today screen, rather than the option above it on the screen (such as Contacts or Menu etc). You can change the Button settings but whenever you restart the machine, this gets reverted back, so that it takes you to the Today screen.
Himuraken was kind enough to point me in the direction of a .dll file which corrects this problem. It's called ManilaToday.dll. There will already be a file named this in the Windows directory on your phone, which you will need to delete. You can't delete this from your PC using ActiveSync. You need to use the FileExplorer on your X1 and browse to the Windows directory. Once there, select 'Menu' then 'Show All Files'. It may take a minute or so to display anything because there are so many files there. Delete ManilaToday.dll and then use ActiveSync to copy the new one across to that same location (Windows directory). You might need to set the Right Softkey button function to Right Softkey, but then when you restart it will keep this setting. You can get the new ManilaToday.dll from here...
http://forum.xda-developers.com/attachment.php?attachmentid=185239&d=1242263678
Now just if someone could make a Panel for this new TF3D 2! May be awkward tho, as I think there is a new Panel Manager with the new R3AA roms. The Panels designed for that don't work on R2 roms, such as the Growing Panel. So we need someone to make a Panel for this on both the new and old Panel manager! Doubt it'll happen though, and I doubt I'll have the R3AA rom for quite some time. O2 in the UK took literally about 5 months to release the R2 rom!
Regards
Sonny
Thanks again to Sonny I'll probably try that next.
I had i little bit of success with the original Touch-it install now though. I istalled the version 2 of the album app which seems to work much quicker that what is packaged in the Full CAB.
I still have 1 issue tho i wonder if anyone can help?
I want to be able to see all my pictures on the Photos and Videos tab without having to use album app. Currently only images in the my pictures tab display, I'd like to see images that have been taken with the camera whether they are stored in mypicture/camera/100xperia or on the memory card /dcim/100xperia/.
Is there anyway to change this?
Nevermind I sorted it now. Everything is working nice.
Now if only the lanscape app would work properly it would be perfect. Maybe a move to the install Sonny suggested will give me everything I'm after
sonnysoul said:
Ah! Just had a ton of pop-ups and now have to type all of this out again..!
......
Now just if someone could make a Panel for this new TF3D 2! May be awkward tho, as I think there is a new Panel Manager with the new R3AA roms. The Panels designed for that don't work on R2 roms, such as the Growing Panel. So we need someone to make a Panel for this on both the new and old Panel manager! Doubt it'll happen though, and I doubt I'll have the R3AA rom for quite some time. O2 in the UK took literally about 5 months to release the R2 rom!
Regards
Sonny
Click to expand...
Click to collapse
you can find TouchFlo 3d as a separate panel here http://forum.xda-developers.com/showpost.php?p=2878314&postcount=3
Musse_1 said:
you can find TouchFlo 3d as a separate panel here http://forum.xda-developers.com/showpost.php?p=2878314&postcount=3
Click to expand...
Click to collapse
That's provided you're using Beta 2 or earlier of the TF3D cab.
Can anyone advise me here. Im getting this error whenever i try to use the HDWallS program to apply a wallpaper...
"An error occured during installation: -2147024891"
But if I install the wallpaper cab directly then it works fine. Someone else in the actual HDWall Wallpaper archive thread (yeh i did search! ) said that its to do with the profile you select in the TouchFLO configuration of HDWall. But if the cab works directly is that right?
Id love to use this app as the wallpapers i have put on look sweet as. Not sure if any of these are conflicting it but i have installed...
- Co0kie HQWallpaperPatch (HQWallpaperPatch_v1.15_forManila2.1.cab) - because its linked in the HDWallS app as a needed patch.
- Tore Lervik Stock Homescreen AllBg HD (Stock Homescreen AllBg HD - Tore edition.cab) - because i wanted to show more calendar appointments on my home screen.
- Spikes MicNeo Taskbar Varient 3 v2 (Spike's__MicNeo_TaskBar_Varient_3_v2.cab) - because the standard taskbar is crap!
- MobileMatt Crystal Clock White (MobileMatt_CrystalClockWhite.cab) - To give it a see through effect.
- At0mAng Custom Slider Icons (At0mAng Custom Slider Icons.cab) - to replace the bottom icon set.
Got other stuff on of course but nothing else touches the looks or homescreen.
Any help really appreciated! Please help!
D.
dam no replies. Bump!
Please anyone know what i can do? This thing rocks and i really want to use it
Yep I got the same problems, I also would like to use this app, so an answer would be great.
zipper85 said:
Yep I got the same problems, I also would like to use this app, so an answer would be great.
Click to expand...
Click to collapse
Do you have any of them apps installed that i do? Until (hopefully) someone replies who knows we might as well try working it out ourselves!
I don't know which apps you have installed? I got nothing special, only spb backup and resco explorer for now. I only got my device for 3 days now.
same problem here. :-(
zipper85 said:
I don't know which apps you have installed? I got nothing special, only spb backup and resco explorer for now. I only got my device for 3 days now.
Click to expand...
Click to collapse
My apps were mentioned in my post. I only put down the ones which i thought were related. So things like task manager apps or sensor things i didnt think were important.
Its interesting though that you have only had it a couple days and have the issue. Are you with T-Mobile like me?
No my device is completely ubranded.
I installed also HQWallpaperPatch_v1.15_forManila2.1.cab
but that's the only same app i got like you.
same probleme for me :'(
I fixed it on mine (was a totally clean install before I installed HDWall) by using the app unlock cab. I've attached it for your convenience.
Hope that helps.
Tomas
Wow yes that works fine. Nice one. Not sure if that was mentioned in the original post, so apoligies if it was to anyone who cares for it But nice one mate!
SORTED!
tomaspistola said:
I fixed it on mine (was a totally clean install before I installed HDWall) by using the app unlock cab. I've attached it for your convenience.
Hope that helps.
Tomas
Click to expand...
Click to collapse
Thanks mate, I didn't find this solution in the HDWall thread either but this got HDWalls working for me. Unfortunately CabViaActivesync still errors out. I wasn't seeing thumbnails for some reason though.
Yep that app unlock has sorted it for me too. However i've got a different problem, i wonder if anyone could help?
Here: http://forum.xda-developers.com/showpost.php?p=5441408&postcount=858
sorry noob here, i use the hdwall app to install and only changes top and bottom bars. tried to install just cab and same thing.