Hello, I bought one of these Lux Cases (SOLID BLACK RUBBERIZED SNAP-ON COVER HARD CASE: see : http://www.amazon.com/gp/product/B0013FKACY)
Now, I am looking for a way to fit this case onto this PDair Carmount :http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=6145#thumb
I had used this car mount with a Monaco Case, but the phone keeps falling out the case, hence I changed to the Lux one. So now, I have the mount left, and I am wondering if there is anything that can be fitted to the back of the Lux case to fit into the PDair Mount
thanks - MN
Related
For anyone who's interested, I was beginning to see minor scuffs on the clear part of my X7501's keyboard. I used Meguiar's #10 Clear Plastic Polish, which removed ALL traces of the offending blemishes. I am NOT recommending you use this anywhere else on your devices, especially the screen as I have not tried this myself.
I have also started placing one of those blue micro-fiber cloths Pocket PC Techs sends out with their screen protectors between the PDA and keyboard when closing the case. It fits perfectly and eliminates all contact between the two. I'm sure any cloth in-between will do, cut to size and sufficiently thin enough to allow proper closure.
hello.
where can I buy this product to remove the scruffs of te keyboard?
can yu indicate a webstore? im from Portugal...
best regards
Deiota
Autoparts stores usually carry the Mequiar's products.
I didn't try it myself, but i heard that this product works very well too.
I've been going nuts trying to find a car mount option for my Seidio encased Tilt. Has anyone tried one of the universal grip mount options? For example:
http://www.mobilecityonline.com/wireless/store/productdetail.asp?productid=21890
Thanks....Any advice or suggestions would be very much appreciated!
Rich
I use the Herbert Richter GRIPPER 1 universal mount, which looks EXACTLY the same as the one in your link. It works perfectly for me with the Seidio case.
So how do you like it?
any problems with it? I've heard these are generally very good.
Does anyone use, or have experience/testing with, the Herbert Richter range of holders and mounts?
http://www.expansys.com.au/p.aspx?i=172053 for the Touch Pro specific holder and http://www.expansys.com.au/c.aspx?t=cat&m=1057&c=115 for the full range of mounts (suction, vent, handlebar, etc) to attach the holder too.
http://www.expansys.com.au/p.aspx?i=172309 is the specific mount I am looking at (for a motorcycle) to use with the above holder.
Thanks.
Oh wow these look good and affordable. Better then the universal mount I was going to get, turns out they also make the same universal mount.
Well, I have Herbert Richter holder and mount for HTC Universal (which is a big and heavy phone) and I can say that it holds my UNI firmly and steady for a year or more... today I'm going to post office to get holder and tower arm for Touch PRO (I could use the same arm I already have and buy only a holder but we have two cars at home, so two arms are needed). I'll report this evening are they still as good as they were.
I have the HR for the Pro. But for a motorcycle i prefer a otterbox or a Ram Aquabox 3.
Photo HR Pro
I have the HR mount for the pro - plus a goose neck windscreen mount (which is great) and a vent mount (which is total cack and has broken my vents!)....
adamelphick said:
I have the HR mount for the pro - plus a goose neck windscreen mount (which is great) and a vent mount (which is total cack and has broken my vents!)....
Click to expand...
Click to collapse
Does the phone sit in the HR mount horizontally or vertically, and is the keyboard opened or closed?
I'll answer my own question since I bought this holder. It holds the phone in a landscape mode, although most of the mounts should allow it to swivel.
Keyboard can't open.
One thing I don't like about this holder is when inserting the phone into the holder you have to drag the phone across a plastic holding clip that will likely scratch the phone.
turbocycle said:
I'll answer my own question since I bought this holder. It holds the phone in a landscape mode, although most of the mounts should allow it to swivel.
Keyboard can't open.
One thing I don't like about this holder is when inserting the phone into the holder you have to drag the phone across a plastic holding clip that will likely scratch the phone.
Click to expand...
Click to collapse
I hold the clip open as I slide the Pro in it.
Herbert Richter Mount
I want something similar. Looks like a good idea. I wanna use mine along with Gmeter to do performance testing on my bike. I think i will zip tie it to the clip though, seeing as the launches are kinda violent.
Let me know if you get that mount. I want to know what you think of it.
Hi,
I just got a used Kaiser off ebay. It arrived today. It is a replacement for my Hermes.
My Kaiser came with a brodit passive car mount. It seems to hold the kaiser loosely and allows it to move back and forth a little - i can't see the product code as its attached to a brodit articulated arm thingy. My Hermes is a perfect fit in this holder.
I have a brodit active mount for my Hermes that the hermes fits perfectly but the kaiser also fits into it with exactly the same amount of play as in the kaiser holder that it came with. I have read other threads on here with people saying that the kaiser brodit mount leaves an amount of space behind the unit. Do i have two hermes mounts or are the units brodit sell exactly the same? My only issue with using the active mount for the kaiser is htat the plug does not line up correctly.
i was thinking about getting a Kaiser active mount but am now thinking i may as well adapt the hermes one i have instead of shelling out for the proper Kaiser one if it is going to be exactly the same holder.
anyone done this?
i simply want to re-align the miniUSB (which looks glued on) so that it lines up with the socket on the Kaiser. i was wondering if i can remove it without breaking it and what type of glue ot use to stick it back on?
i was also going to stick some felt or other soft material to the back of the holder to help steady the unit and take pressure of the plug/socket.
i hope i have explained all this clearly enough... seems to be an awful lot of "kaiser one", "hermes one".... let me know if i need to clarify anything.
any help appreciated.
i prised off the usb connector by using a pairing knife. apply enough pressure and rock the blade until the blade is around 1/3 of an inch in and then twist the blade to 'pop' the usb connector off.
I then seated the kaiser in the holder, inserted the usb connector, checked over th fit and then seperated it all again.
Leaving the PDA in the holder i applied superglue to both the usb connector and the area of the holder onto which the connect would sit.
Then inserting the connector into the PDA in-situ, applied pressure to the connector until the glue cured.
Hey presto.... £40 saved!
it can be a bit fiddly to get the Kaiser seated properly in the modified Hermes holder but i heard the official Kaiser one was no different!.
Hope this is a help to someone.
Hi, I've been wondering if defy in otterbox will fit in the official motorola car mount, has anyone tried that?
The official car mount or the Defy Fit just perfectly. So I don't think you can use any case with this car mount. Even without case it's sometimes hard to pick up the phone out of the mount.
you'll need a case that didn't cover the angle and that's very thin on the back to expect using it on the official car mount
Yeah, heard similar answer from two sellers So I need to look for something adjustable