Hi there,
I have a big problem with my Softkeys on the X1. By default left and right softkeys are assigned to calendar and contacts... but this does not match with my interests
By changing "left softkey" to "Start Menu" in "buttons" (or "keys", don't know exactly, because I use a german firmware), it opens the start menu... so far so good, but: It always opens the start menu. No matter what a menu says. "Close" e.g. does not close the screen, it opens the start menu
Now I'm useing a tool (called "remap softkeys") and changed the right softkey to comm manager, which works pretty well. Unfortunately I don't know, which command opens the start menu.
My target configuration opens the Comm Manager with the right softkey and the start menu with the left softkey in the homescreen. All options in all other screens which are dedicated to the left and right softkey should be kept.
I hope you can help me
Action_Heinz
Ok here's the file you need. Unzip and Map the softkey with the prog you have to Startmenu.exe. I am using this as well. The EXE is NOT made by me, unfortunately I can't find the site where I downloaded it anymore... Anyway it's freeware. Enjoy.
Thanks
Works perfectly! This is exactly what i've been looking for.
Thank you very much
You could have a look at X1BC or my X1ButtonMapper. These programs give you a lot more options regarding button remapping and they are small and for free.
Related
I am using the smartkey program to hold the softkeys to enter startscreen.
Now I am looking for an option or a program to copy/paste and to put it under the message button.
Or does anybody knows a program that only gives the option to cut/copy/paste.
With this my phone would be perfectly tunned.
aage said:
I am using the smartkey program to hold the softkeys to enter startscreen.
Now I am looking for an option or a program to copy/paste and to put it under the message button.
Or does anybody knows a program that only gives the option to cut/copy/paste.
With this my phone would be perfectly tunned.
Click to expand...
Click to collapse
If the context menu of the program contains copy and paste, you can hold the center key of the 5-ways navigator to popup the context menu.
water
Hi Water,
Thanks, but not all programs have that option. That's why I like to have a program like that.
Right now i'm using Magicbutton but that doesn't have that function. GSMagic had it but I like Magicbutton better. So now I need the copy/past function.
You can try Xbar which is under the D-Pad. It opens up a screen in which you can select the running task but also shortcuts to programs of your liking and there are shortcuts ready for copy and paste and cut.
Wouter
You can use PQz to map a hardware key (I use the Windows-key) to CTRL, so that you can use ctrl-c, ctrl-v etc.
http://forum.xda-developers.com/viewtopic.php?t=33343&highlight=ctrl
I think... just speculating here.. that they are more looking for...
press button - it copies whatever is the active selection
press button again - it pastes whatever is on the clipboard
Not sure, though... ctrl+c / ctrl+v works with the SIP, with that tool it works with the hardware keyboard, and if you're working with the sip - and thus a stylus - you can often just tap-and-hold and choose copy from the context menu.
PHM Keys comes with cut copy paste.
Use a button mapper to do as ZeBoxx says, if it's what you need, and you'll have quick access to said functions.
V
Thanks,
I'm using PQZ now. With TAB as CTRL. WIN would not work together with smartkey, because hold button 1 is the same hex number as WIN.
But this program is realy good.
My Solution to this...
I have a slightly hacked up copy of PHM Keys (couldn't get it to install on my 8125, so I hacked it off of a WM2003 device) that I'm using to solve this problem.
In my Start Menu I have three icons - "Object Copy", "Object Cut", and "Object Paste" (PHM Keys) so whenever I have something highlighted I click my (smartskey modified) Start Menu soft button, scroll down a slot or three with the 5-way, and select the copy/cut/paste operation I need.
When the KB is open it's even quicker Start-o Start-b Start-j respectively. Another plus is this works in nearly EVERY situation where you can highlight something. Sometimes the other options (context menus, SIP kbds, etc.) don't work everywhere.
Now some may not want to waste three Start Menu slots, but I have Tray launch filled with my apps, still have 4 Start Menu slots available, and all my non-soft buttons are mapped to one app or another, so I'm cool with them.
Plus I have my SIP pop-up KB completely disabled (I hate it's "intrusiveness" and only use the HW KB in landscape mode) so in portrait mode I had *NO* way to copy/cut/paste and had to devise something.
Good Luck
-JMS
I've updated VJKeyPress to add -cut, -copy, -paste.
On my website.
V
I want to use my left softkey to cascade my wisbar start menu..I have tried the following registry settings HKCU\software\microsoft\today\keys\112
Name:start
String: "\program files\lakeridge\wisbar advance\wisbaradv2.exe" 2
I got the above link by going to start menu\programs\wisbar advance\casc start menu and checking its target...
Now when i click the left softkey it is executing only
"\program files\lakeridge\wisbar advance\wisbaradv2.exe"
rather than
"\program files\lakeridge\wisbar advance\wisbaradv2.exe" 2
which is for cascading start menu...
can somebody give me a solution for this...
Try this:
Create a shortcut to
"\program files\lakeridge\wisbar advance\wisbaradv2.exe" 2
and assign the shortcut to your left softkey.
Maybe you can place the shortcut anywhere, or maybe it has to be placed in \Windows\Startmenu.
Good luck.
done
I had done that before...but i had forgotton to reboot :? ..its working great now...Thanx anyways for the help...I have now mapped my leftsoftkey to the start menu and right softkey to file explorer...no need of smartskey!!
An even better solution (IMHO) is to use Water's Smartskey. Smartskey allows you to use left soft button press-and-hold to activate any 3rd party menu (even standard window menu). In this way you don't lose the original press function for the softkeys and can still easily open any cascading menu.
I use it to activate GsPocketMagic, a cascading menu.
http://forum.xda-developers.com/viewtopic.php?t=41060
hmm..
Well smartskey is still in its developing stage..once water completes it without any bugs i will be the first one to use it..its a very gud app
I use the comm manager button on the left of my 8125.. I just went into buttons in settings, and chose "casc start menu" and it worked fine...I like having start menu access from that key because its natural for one hand operation.
Well smartskey is still in its developing stage..once water completes it without any bugs i will be the first one to use it..its a very gud app
Click to expand...
Click to collapse
I have been using it for several months now (and my version is behind at least one-two revisions), I have had absolutely no problems with it. It works as advertised.
There's no harm in trying it.
Help!
Is it possible to map the Startmenu programs window to the left softkey?
I'd like to access the programs window by one key press.
To put it anotherway, can somebody tell me what shortcut can opens the programs window or the settings window?
Pressing ok on the today screen will open up the startmenu .. in case you didnt knew .. otherwise .. the bottom window key can do the same ..
gravejoker said:
Pressing ok on the today screen will open up the startmenu .. in case you didnt knew .. otherwise .. the bottom window key can do the same ..
Click to expand...
Click to collapse
I knew that. I was talking about one-button-press access to the Programs window, and not to the Startmenu.
So I'd like to open the programs window by pushing the left soft key.
Then use WM5NewMenu to create a new menu containing all your programs .. then use the left softkey to launch that new menu ..
gravejoker said:
Then use WM5NewMenu to create a new menu containing all your programs .. then use the left softkey to launch that new menu ..
Click to expand...
Click to collapse
Thanks, but it'd be too much. I use almost all of the programs. I've sorted them into sub folters, it looks like almost a "normal" phone menu system.
And that's why I'd like to access them by one key...
Anybody? else?
enabe said:
Thanks, but it'd be too much. I use almost all of the programs. I've sorted them into sub folters, it looks like almost a "normal" phone menu system.
And that's why I'd like to access them by one key...
Anybody? else?
Click to expand...
Click to collapse
Use Resco Explorer and browse to windows-start menu and highlight the programs folder, tap menu and choose 'create shortcut in start menu' then after closing down Resco go to settings and choose 'soft key' in there, choose program. works for me! Also if when using Resco you goto menu and choose large icons in the 'view' sub menu, the layout will look very similar to the view when opening up programs the original way. Hope this helps!
padlad said:
Use Resco Explorer and browse to windows-start menu and highlight the programs folder, tap menu and choose 'create shortcut in start menu' then after closing down Resco go to settings and choose 'soft key' in there, choose program. works for me! Also if when using Resco you goto menu and choose large icons in the 'view' sub menu, the layout will look very similar to the view when opening up programs the original way. Hope this helps!
Click to expand...
Click to collapse
Thanks! You are beating about the bush!
It's almost that I wanted, but it runs the Resco Explorer, and the Resco is showing the programs folder.
The result is not bad, but starting the Resco takes more time, and more memory than the "normal" programs window
Somewhere I saw some *.cpl file (or what), in a shortcut that opened the settings window. I thought there is a similar solution to the programs folder too. So i'd like to know what should contains my .lnk file, that runs the normal programs window.
Any solution for this???
Thanks
enabe said:
Help!
Is it possible to map the Startmenu programs window to the left softkey?
I'd like to access the programs window by one key press.
To put it anotherway, can somebody tell me what shortcut can opens the programs window or the settings window?
Click to expand...
Click to collapse
I also want to know how to map the "Programs" to the softkey!! And it seem no one know the answer!! and the path to show the "Programs" in icon is not just a simple .lnk
Anyway the device lock be mapped to a soft key instead of a hard key? I have it mapped to the messaging button, but would rather have it at the calendar or contacts button.
Cingular 8125
ROM 1.8.11.1WWE
WM5
A little program called WM5NewMenu should do it. It's free, just put it into a google search.
calouro said:
A little program called WM5NewMenu should do it. It's free, just put it into a google search.
Click to expand...
Click to collapse
Thx, but all this did was to let me rename the word "calendar" to "device lock", with the actual calendar program still assigned to the left softkey.
Cingular 8125
ROM 1.8.11.1WWE
WIZA100
I'm trying to get some directions for the program, from doing a little research on google it looks like you can reassign the button with that program, just have to figure out how. I'll look for some direction on the program.
Ok, I figured it out.
Goto WM5newmenu, under "launch by:" select "Left Softkey" Then under "Soft Key Label:" enter your label (ie. "Lock")
Then goto the "items" tab. select "new" then select the little box next to "parameters:" select "windows" then ""go into" at the bottom.
Scroll over to "BSDeviceLock.exe" then hit "select"
Then enter "lock" or whatever you want under "item label:"
You will see the new entry on the left side of the screen, you may have to scroll down a little. You can uncheck all of the other items and just leave the new "Lock" item you created. After that select ok and do a soft reset.
After it resets, hit your left sofkey, you will see your newly created lock pop up. Then just hit the center button on the pad! It locks!! I just did this and it works!!
Hope this helps,
Just found this, it's even better then WM5newmenu:
Reassign left softkey on Today screen to open Notes application
Use Total Command to navigate to HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\11 2
Change the “Default” key to the name that you want to appear on the button (in my case Notes)
Change the “Open” value to the location of the program you want to open (in my case “Windows/Notes.exe” ( you would enter “Windows/BSdevicelock.exe”)
Perform a soft reset
Look in your windows folder to see if you have BSdevicelock.exe if you don't let me know and i'll get it to you.
calouro said:
Just found this, it's even better then WM5newmenu:
Reassign left softkey on Today screen to open Notes application
Use Total Command to navigate to HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\11 2
Change the ?Default? key to the name that you want to appear on the button (in my case Notes)
Change the ?Open? value to the location of the program you want to open (in my case ?Windows/Notes.exe? ( you would enter ?Windows/BSdevicelock.exe?)
Perform a soft reset
Look in your windows folder to see if you have BSdevicelock.exe if you don't let me know and i'll get it to you.
Click to expand...
Click to collapse
I did the registry edit, and when I tap the left soft key, I get "the file device lock cannot be opened due to an untrusted certificate, or one of its components is missing." I could NOT find BSdevicelock.exe in the Windows folder. Where in windows should this file be located?
I would like that BSdevicelock as well, if I could.
Its in the root windows folder, you probably don't have it.
I'll attach it as soon as I get home from work tonight!
Just copy it into your windows directory.
BSDevicelock
Just unzip this and place it in your windows folder with the registry change.
Hope this helps!
calouro said:
Just unzip this and place it in your windows folder with the registry change.
Hope this helps!
Click to expand...
Click to collapse
Got it good buddy! I kept the other items in WM5NewMenu and labeled the softkey "Menu", and changed BSdevicelock in the label box to Device Lock. Now all I do is hit the new softkey "Menu", scroll to device lock, hit the center button on the D pad. Device locks like you said it would! I was able to do this after extracting the BSdevicelock.zip to my Windows folder. Excellent instructions! Thx a MILL! If you discover anything else that's appealing, let me in on it..o.k.? Just found out I could move Device Lock to the top. Now I don't have to scroll down.
Cingular 8125
ROM 1.8.11.1WWE
ROM date: 2005
No problem, glad I could help!
hotdog53 said:
Got it good buddy! I kept the other items in WM5NewMenu and labeled the softkey "Menu", and changed BSdevicelock in the label box to Device Lock. Now all I do is hit the new softkey "Menu", scroll to device lock, hit the center button on the D pad. Device locks like you said it would! I was able to do this after extracting the BSdevicelock.zip to my Windows folder. Excellent instructions! Thx a MILL! If you discover anything else that's appealing, let me in on it..o.k.? Just found out I could move Device Lock to the top. Now I don't have to scroll down.
Cingular 8125
ROM 1.8.11.1WWE
ROM date: 2005
Click to expand...
Click to collapse
I use MortSaver (Phone Edition) which locks and blanks screen and relocks/blanks screen after calls/reminders etc..
guys you seem to me to be making this quite hard for yourselves
use this softkey app to change the softkeys (3rd post)
use this device lock app.
go to start/settings/system/softkey and select the device lock app
and soft reset, softkey changes generally don't occur until after
bbobeckyj said:
guys you seem to me to be making this quite hard for yourselves
use this softkey app to change the softkeys (3rd post)
use this device lock app.
go to start/settings/system/softkey and select the device lock app
and soft reset, softkey changes generally don't occur until after
Click to expand...
Click to collapse
None of your "this" links worked for me. Besides, I'm content now.
My old simple Nokia 6200 had a feature whereby the keypad was locked automatically without need for a PIN three minutes (selectable) after a call when there was no activity.
Is there any easy way to implement this ? I can map H/W keys (thanks to Molski) but this isn't quite the same.
calouro said:
Just unzip this and place it in your windows folder with the registry change.
Hope this helps!
Click to expand...
Click to collapse
Is BSdevicelock better than the lock app already on the device in the Windows folder??
The app im talking about is called devicelock.exe on my device. I have an HTC Wizard
I did not have devicelock.exe in my windows folder originally. BSdevicelock is just a little program that simply locks the device. I don't have devicelock.exe, but I imagine they probably do the same thing. I think BSdevicelock is actually installed by the BatteryStatus program. If you have a later version of Battery Status, you should have BSdevicelock.
Hi,
Is there any way to change the bottom left Windows Icon shortcut. Its default is the same as the middle hardkey to call the application folders. I want to change to another application.
thanks
paty said:
Hi,
Is there any way to change the bottom left Windows Icon shortcut. Its default is the same as the middle hardkey to call the application folders. I want to change to another application.
thanks
Click to expand...
Click to collapse
Since you're on an EnergyROM, you have AMeBa (X-Button Settings) pre-installed.
Go to Start > Tools > X-Button Settings > there's an option there (I think it's the first page) that has things to do for the Start Button. Change that option to "Run App" and select an application you want to run when pressing that button.
It works . Thanks a lot.