any ideas to really shutdown this device?
without remove the battery
regards,Cri
no responses?
regards, Cri
Hi,
press the call, end call, power on button and the soft reset button at the same time for about 5-10sec. that will do.
kind regards
Freddy
but this is the Hardreset!!!
http://www.hardreset.eu/hp_ipaq_hw6915_hard_reset_soft_reset_en.html
please, any ideas?
nope, as far as i know it is impossible. when i need to shut down device completely i remove the battery and put it back again. and i dont touch any button, because i do, device starts.
Related
Hi guys. My qtek 2020 has gone dead. i pressed the reast button and then it suddenly did not start. The screen is completely blank. The problem is that the power on/off button is broken and i cannot Hard Reset the device to try and start it up this way. When i press only the reset button nothing happens. Is there anything else i can do?please help
is it helpful to remove the battery as a "cold reset" ?
which battery. The backup one? because the main battery i have removed and nothing happens
guys i have a similar problem. my power button has broken and i turn on the device with the record button (i have remapped the buttons). Yesterday i turnd it on and the screen freezed on the today screen . I performed a soft reset, the screen went blank and it never turned on. Now the device is dead, soft reset won't work, it doesn't seem to charge (no light when i put it on the cradle) and i cannot perform a hard reset because i do not have a working power on/off button.
Is there anything i can do to turn it on?
...
Try to remove main battery for a longer time(up to 1 hour or more). The backup battery will discharged what causes hard-reset afterwards.
demstav said:
Hi guys. My qtek 2020 has gone dead. i pressed the reast button and then it suddenly did not start. The screen is completely blank. The problem is that the power on/off button is broken and i cannot Hard Reset the device to try and start it up this way. When i press only the reset button nothing happens. Is there anything else i can do?please help
Click to expand...
Click to collapse
ok so i have seen reset buttons that stick and will not go
did you try pressing the reset button aggain? do you fell the click he made?
try it
hey guys, please help me...i bought imate jam used one form some of my frnd...now i want to hard reset ...can anyone tell me how can i do that...and one more thing lets say i hard reset it, will it setup automatically or do i have to put everything on my behalf....please help me....
Push the bottom button and quickly hold the Power button
If that doesn't work, try the other buttons. I think it is the power button.
It will setup and runs nicely as a phone. No worries.
Yup,
Its the power button. Hold your power button and soft-rest your device for a Hard reset. Yu will then be prompted with a screen saying your device will be customized automatically in 3secs. If you want to save space, skip that by a soft-reset again.
Regards
Carty..
Hi,looking for some help please. The PDA has suddenly started to soft restart everytime the powerbutton is pressed, either to switch on or off. I can only get it to screen off on auto timed shut down. It will take incoming calls okay but if I press the on button to make a call it resets. Any ideas before I hard reset it? Last thing done was add a contact, no updates or the likes.
Had quick search for this but couldn't find an answer, for this problem just the jammed soft reset button which my has not got that works normally.
Thanks inadvance
Chris
flyingvicar said:
Hi,looking for some help please. The PDA has suddenly started to soft restart everytime the powerbutton is pressed, either to switch on or off. I can only get it to screen off on auto timed shut down. It will take incoming calls okay but if I press the on button to make a call it resets. Any ideas before I hard reset it? Last thing done was add a contact, no updates or the likes.
Had quick search for this but couldn't find an answer, for this problem just the jammed soft reset button which my has not got that works normally.
Thanks inadvance
Chris
Click to expand...
Click to collapse
Have you tried to switch it off by an application like ppcShutdown, to see if you have the same problem ?
Cheers,
.Fred
Hi Dotfred, I haven't no. It will time off okay after 3 minutes of nil use. But have to press the powerswitch to turn back on. Then wait for soft reset function to run its course.
Do you have to use the powerswitch with ppc shutdown to 'switch' it back on?
I've been able to back everything up now so will try the hard reset see if that sorts it.
Any other thoughts would be appriecated
Many thanks
Chris
flyingvicar said:
Hi Dotfred, I haven't no. It will time off okay after 3 minutes of nil use. But have to press the powerswitch to turn back on. Then wait for soft reset function to run its course.
Do you have to use the powerswitch with ppc shutdown to 'switch' it back on?
I've been able to back everything up now so will try the hard reset see if that sorts it.
Any other thoughts would be appriecated
Many thanks
Chris
Click to expand...
Click to collapse
I was trying to find out if it was related to the switch off of the ppc or to the power button.
Since it seems this is purely related to the power button, I wonder if an installed prog has been assigned to the power button and so generates a soft reset. I think that your best choice is indeed a hard reset, because I really don't know if there is an easy way to find out what's happening with the power button.
Cheers,
.Fred
Hello.
I have a T-mobile Mda and yesterday it began to do wacky things:
When I press the power button to wake the device from sleep, the phone volume balloon pops up and all the indicators go down. As if somone is holding the "down" button and not letting it go. When I manually change the volume, it goes back down again. When I press "start menu" it shows up for a second and then disappears. It seems as if the buttons are stuck, but they can't be. I did not drop the phone nor there was any physical damage done to it.
When I press the big "select" button the problem seems to go away, but resurfaces when the device goes to sleep and then back from sleep.
What could possibly cause this and how to fix it?
Thanks!
natan said:
Hello.
I have a T-mobile Mda and yesterday it began to do wacky things:
When I press the power button to wake the device from sleep, the phone volume balloon pops up and all the indicators go down. As if somone is holding the "down" button and not letting it go. When I manually change the volume, it goes back down again. When I press "start menu" it shows up for a second and then disappears. It seems as if the buttons are stuck, but they can't be. I did not drop the phone nor there was any physical damage done to it.
When I press the big "select" button the problem seems to go away, but resurfaces when the device goes to sleep and then back from sleep.
What could possibly cause this and how to fix it?
Thanks!
Click to expand...
Click to collapse
Since this just begun happening, it sounds like recent software you installed is corrupted and causing this. If you did install software just prior to this, uninstall the software then power off and on your device.
im having the same problem with my volume control going haywire, and random letters being displayed on the screen. but this happened after, which i now realize was an incomplete upgrade crossbow cause my device was cid-locked. i followed the "g4 hard spl (cid unlock)" topic, then upgarded to the "touch" rom, but i still get the same problem. any insights?
'Do a Hard Reset' of the phone,although you'll loose all your personal data,contacts messages etc...,but phone will reset to default settings and erase all corruptions,otherwise do a reflash.
Cheers !
i tried doing a "hard reset" but it wont work. the screen says to push the 'send' button, but when i do the button doesn't respond. so i tried a reflash but im still getting the same problems. do i need to reflash to an older rom, then upgrade again? if so, where can i get an older rom version, or perhaps the qtek 9100 original rom?
so i undid the hard spl lock, and reflashed my phone with the vodaphone qtek 9100 rom package. everything seems fine when the battery is full, but as the battery power goes down the problems become more frequent. the phone thinks buttons are being pressed, ala the lights on the keys are on, the volume constantly goes up and down, contacts open. can anyone help me? i dont know what left to do
Me too, it is if the down button is being held down.
need to bumps this thread. really need some help to fix this. its really frustrating me
two weeks and still no progress
someone? anyone? guide me and any others who are having this problem in the right direction. dont want to give up this phone, i really like it.
Same problem over here
Is you’re problem fixed or still the same... My phone is doing exactly the same.
my phone is still not working properly. cant find any solutions
hello...
my on/off button is defect. so i cant switch it on. Only via reset
can i configure another button for reactivation from standby? because that does not work anymore too
thanks for help
not sure about hermes but my phone turn on at the press of any key unless i set it only to turn on by on button in buttons in settings
Go to the settings, then to system, then go to the keylock options in there and set it to not lock at any time.
Works with any key, but its not really a good idea to have that in your pocket.
I would say you should get the button repaired instead.
Thanks a lot guys...
does someone knows how i can switch off the phone? everytime i want to swithc it off i have to push the reset button or do a soft reset :/ i thin k a regular shutdown would be better...
i friggin have the same problem. My girl dropped my phone and the power button is messed up...
I press the camera button to turn on tho.. i cant turn off unless i let it sit and it does it itself.
http://www.mobiletopsoft.com/pocket-pc/download-psshutxp-turn-off-display-off-pda-0-29.html
Thank You ^^^