Related
i'd like to get my default voice dialer program to recognize the ms voice command program that i installed on my 8125. in the application list to record a voice tag... ms voice command 1.5 doesn't show up. is there a reg edit that can be made to have it show up?
theres numerous threads on this subject. plz try search first
edsub said:
theres numerous threads on this subject. plz try search first
Click to expand...
Click to collapse
wow... what alot of help. you are wise beyond your years. oh btw... i did try searching first.
not just trying to pick on you in particular... but it's so annoying when people reply to threads with this response. it just shows ignorance... if you can't contribute then don't post! they just assume the person hasn't searched.... or.... or... or they don't take the TIME to read the question the person is asking. alot of the time the question is different from what's arleady been posted. i think i'm done ranting.
- Jason
How lame...
I agree with jcrew...
Read the question someone is asking before you lambast them for repeating an already answered question... :?
The question jcrew has asked is fundamentally different that what has been asked in regards to the BT problems with VC before...and NO it has not been answered here yet.
My 2c... :roll:
J Crew said:
i'd like to get my default voice dialer program to recognize the ms voice command program that i installed on my 8125. in the application list to record a voice tag... ms voice command 1.5 doesn't show up. is there a reg edit that can be made to have it show up?
Click to expand...
Click to collapse
This will do the trick: VoiceEnable
http://www.burling.co.nz/Default.aspx?tabid=151
wgary said:
J Crew said:
i'd like to get my default voice dialer program to recognize the ms voice command program that i installed on my 8125. in the application list to record a voice tag... ms voice command 1.5 doesn't show up. is there a reg edit that can be made to have it show up?
Click to expand...
Click to collapse
This will do the trick: VoiceEnable
http://www.burling.co.nz/Default.aspx?tabid=151
Click to expand...
Click to collapse
thanks for the help... but unfortunately this will not work either. this was the first thing that i tried when i purchased the headset. it does allow ms voice command to be called up with a headset, but only certain ones. my headset still does not work with this program. it's a conflict of sorts with some headsets and ms voice command. thanks again though.
- Jason
J Crew said:
i'd like to get my default voice dialer program to recognize the ms voice command program that i installed on my 8125. in the application list to record a voice tag... ms voice command 1.5 doesn't show up. is there a reg edit that can be made to have it show up?
Click to expand...
Click to collapse
First, MS Voice Command doesn't record voice tags... it's a voice recognition program. Reading the docs that accompany the program may explain this. Second, you didn’t search hard enough ‘cause Feb 18th I posted a question on this subject in the Wizard Upgrading forum. Can’t blame you much because it IS a ***** to search here, I personally use Google and use the site: parameter to point here. Third, I also couldn’t get the VoiceEnable proggy to work. I change the reg settings accordingly to make it work. You can check out the entire procedure at http://forum.xda-developers.com/viewtopic.php?p=241514&highlight=#241514
Third, ranting gets you no where when you’re asking for help, trust me.
Hope I was of some help.
Steven
Again, I must agree with JCrew
Hi Dr and all,
This hack does work with all bluetooth headsets...Thre have been posts upon posts on this like this:
http://forum.xda-developers.com/viewtopic.php?t=35767
Some of you may be lucky with VC and the Bluetooth set you have, but many of us are not. After we initiate the first call from the headset via VC and hang-up, we cannot re-initiate ANY calls from the BT headset unless we soft reset the Wizard/8125.
So neither the manual VC hacks, NOR the dutch voice enabler CAB do squat for us. Its an issue between VC and specific BT headsets where the BT channel is left open after a call and cannot be shut thus preventing re-initiation of calls after the first.
Unfortunately THERE IS NO FIX for this, MobileHavoc has valiantly tried to fix this, but to no avail...
So, as of 3/22/06, the last word: the hack DOES NOT work for all, and Jcrew is actually asking a different question...Lets all re-read it carefully.
He is asking if we can use VoiceDialer/SDDialer (the Cyberon Program) to start/call/run Voice Command so as to avert the open channel issue I mentioned above...So can we somehow hack SDDialer to initiate and close the VC program... this could potentially avert the program if SDDialer shuts that BT channel after each call...
If we have a solution lets offer it, otherwise lets refrain from mentioning the hack over and over...For at least 50% of us it does nothing and it wastes posts... :wink:
If it's any help to anyone, using the hack to make the bluetooth trigger voice command etc and then using the plantronics voyager 510 headset does work well.
Thanks Jon,
the link I posted above kind-of has a smattering across its posts of which BT sets work or not with VC on the Wizard...
Boogaboo
Re: Again, I must agree with JCrew
boogaboo said:
Hi Dr and all,
This hack does work with all bluetooth headsets...Thre have been posts upon posts on this like this:
http://forum.xda-developers.com/viewtopic.php?t=35767
Some of you may be lucky with VC and the Bluetooth set you have, but many of us are not. After we initiate the first call from the headset via VC and hang-up, we cannot re-initiate ANY calls from the BT headset unless we soft reset the Wizard/8125.
So neither the manual VC hacks, NOR the dutch voice enabler CAB do squat for us. Its an issue between VC and specific BT headsets where the BT channel is left open after a call and cannot be shut thus preventing re-initiation of calls after the first.
Unfortunately THERE IS NO FIX for this, MobileHavoc has valiantly tried to fix this, but to no avail...
So, as of 3/22/06, the last word: the hack DOES NOT work for all, and Jcrew is actually asking a different question...Lets all re-read it carefully.
He is asking if we can use VoiceDialer/SDDialer (the Cyberon Program) to start/call/run Voice Command so as to avert the open channel issue I mentioned above...So can we somehow hack SDDialer to initiate and close the VC program... this could potentially avert the program if SDDialer shuts that BT channel after each call...
If we have a solution lets offer it, otherwise lets refrain from mentioning the hack over and over...For at least 50% of us it does nothing and it wastes posts... :wink:
Click to expand...
Click to collapse
any progress
A work around
Folks, I also have the problem that after ending a call I am unable to initiate VC via bluetooth. I have however found a work around. I am hoping that one of you geniuses out there can create an app to make this smoother. Here is what I found.
I installed the btaudiotoggle and mapped it to one of the hardware keys, if after ending a call I press that button it opens the audio channel to the headset. I then use the button on the headset to close it and VC then works again. The problem is that you have to touch the phone to do this.
My thought is if some smart programmer can create an service type app which is triggered by the end call event and either runs btaudiotoggle or performs the same function.
So that's what I have, hope it helps.
Brian
I am using Andots WM6 ROM on my SMT5600 and my phone works better than ever. However, Voice Tags do not work on the phone or over blue tooth. You can create a voice tag but you cannot activate them. Can anyone point me in the right direction to trouble shoot this. I need to know if there is an application that is launched when you hold a button to activate a voice tag? Or, is this a function in the headset or hands free profile? Could it be a simple registry entry I could import from WM5?
Thanks for your help.
Same problem here
I have the same phone & problem.
And I can't charge through USB.
Anyhow, this version improves the typhoon far beyond previous versions. It's faster than wm5, wm5torage is incredible, there are no memory leaks (with wm5 I ended up with 2mb free and had to reboot frequently)
Cheers.
Did you enable USB Charging from Power Management? It's weird, cause by default, its enabled and it works
karhoe said:
Did you enable USB Charging from Power Management? It's weird, cause by default, its enabled and it works
Click to expand...
Click to collapse
Thanks for your help karhoe
I tried to do what you mention, but when I disable USB charging, there is no sign of charging (expected behaviour) and when I turn it back on, the problem continues.
Last night I reflashed to wm5 so I can:
- Check that the phone still can charge through USB (it charges ok)
- Get the font configuration in the registry so fonts look the same in wm6.
- Try to identify how voice tags work and see if I can take some dll/key association back to wm6.
I'll post results!
Mariano
Ok, I'm back to wm6 and I've found the following:
* USB charging works OK... I don't know what caused it. I'm reticent to install wm5storage, maybe it has something to do with it.
* I made the fonts look exactly the same as wm5. This is how:
In the registry, set the following:
\HKEY_LOCAL_MACHINE\GDI\SYSFNT\
CS=0
Ht=4294967281
It=0
Nm=Segoe Condensed
Qt=5
Wt=400
\HKEY_LOCAL_MACHINE\GWE\Button\StFontWeight\Wt=700
\HKEY_LOCAL_MACHINE\GWE\Menu\BarFnt\
WtMUI=700
Wt=700
\HKEY_LOCAL_MACHINE\GWE\OOMFnt\
Ht=4294967284
Nm=Tahoma
Wt=400
Anyway If you have Tahoma in your device's Windows directory some programs will look different.
Finally, regarding voice tags, I could only discover that there are no links like HomeLP.lnk or things like that to call an executable. It must be done some other way. :S
Mariano
With regards to bluetooth voice dialling, ive now got the phone responding to the button by changing oemagw.dll but voice dialler is not launced, it just connects to the phone so you can hear it. Does anyone have a copy of microsoft voice dialler so i could test(an evaluation copy)?
Used this cab to get it this far
http://forum.xda-developers.com/showthread.php?t=308247
I ad to re-pair devices after doing this.
WildDogRob said:
I am using Andots WM6 ROM on my SMT5600 and my phone works better than ever. However, Voice Tags do not work on the phone or over blue tooth. You can create a voice tag but you cannot activate them. Can anyone point me in the right direction to trouble shoot this. I need to know if there is an application that is launched when you hold a button to activate a voice tag? Or, is this a function in the headset or hands free profile? Could it be a simple registry entry I could import from WM5?
Thanks for your help.
Click to expand...
Click to collapse
is this what you wre looking for?
802 said:
With regards to bluetooth voice dialling, ive now got the phone responding to the button by changing oemagw.dll but voice dialler is not launced, it just connects to the phone so you can hear it. Does anyone have a copy of microsoft voice dialler so i could test(an evaluation copy)?
Used this cab to get it this far
http://forum.xda-developers.com/showthread.php?t=308247
I ad to re-pair devices after doing this.
Click to expand...
Click to collapse
Just to note this works now. just delete pairing after cab install, pair again, set as handsfree, itworks over bluetooth.
Thanks!
rickwyatt said:
is this what you wre looking for?
Click to expand...
Click to collapse
Now voiceTag is working fine. Great!
Found a way to enable built in voice tags over Bluetooth.
Ok, I have found a fix to enable built in voice tags over Bluetooth on the SMT5600 with Andots WM6 ROM. Create this registry entry and you will be able to activate voice tags by pushing the action button on the bluetooth headset. I have a new problem though. When you create a voice tag it is not clear and hardly legible. Can anyone help with this?
Browse in registry to:
HKLM\Software\Microsoft\Bluetooth\AudioGateway
Create a new DWORD Value and name it “ Capability “ give it a value of “ 37 “ all without quotes. Save and reboot the phone and it will work.
Please let me know if this works for anyone.
Thanks for all the help.
WildDogRob said:
Ok, I have found a fix to enable built in voice tags over Bluetooth on the SMT5600 with Andots WM6 ROM. Create this registry entry and you will be able to activate voice tags by pushing the action button on the bluetooth headset. I have a new problem though. When you create a voice tag it is not clear and hardly legible. Can anyone help with this?
Browse in registry to:
HKLM\Software\Microsoft\Bluetooth\AudioGateway
Create a new DWORD Value and name it “ Capability “ give it a value of “ 37 “ all without quotes. Save and reboot the phone and it will work.
Please let me know if this works for anyone.
Thanks for all the help.
Click to expand...
Click to collapse
Thank you SO much!!!
It works like a charm in my UK SPV C500!
You' re great!!!
Help with what file WM6 uses for voice tags
Can someone please tell me what .dll or file is used when you record a voice tag. I am using Andots WM6 ROM on my SMT5600 and voice tags do not work. I want to try to replace the non-working file with a WM5 file.
Or, maybe someone could tell me how to figure out what file/.dll is used. I’ve searched the registry for anything referring to voice tags but I found nothing.
Thanks
Ok guys.....So I have a wing with PDAVIET .14 ROM. I pretty much switched as soon as i got the phone so i havent had much experience with the standard tmo rom but i am having an issue with my Voice speed dial. Basically if i go to the programs and click on the application it works fine..i can attach voice recognition titles to different contacts.
The problem that I am running into is when i assign the button on the wing (one right above the messages button) and push and hold it gives me the error.
"The file 'VoiceCmd' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
But it does work directly from the .exe file. Whats wrong here? It does say to reinstall if the problem persists so...what is the most recent edition for the wing? or is that even necessary to do that. I tried to run the app from a couple buttons but nothing. In a whole, i'm trying to get my voice command to work through my bluetooth. am I going about this totally wrong?
Comments appreciated!
lokmeup said:
Here is a MS Voice Command 1.6 and BT Patch ONLY ExtROM that I use when building my ROMs. It will install everything the exact way necessary to get announcements and BT to work without any further changes. Just install, Run, Pair your BT, Soft Reset, and have fun.
MSVoiceCommand1.6_and _BTpatch_ExtROM.zip
http://www.sendspace.com/file/3xqdnc
If you only wanted the CABs...
MSVoiceCommand1.6_and _BTpatch_CABs.zip
http://www.sendspace.com/file/bq815x
Ron
Click to expand...
Click to collapse
So I did a bit of searching and I just decided to install voice command from the above thread. I know that it was in the Hermes forum but i assumed it would be all good. Now i have tried both of them and figured out how to get them to work. so now they are both working with the handset, all gravy. I think i am going to keep the speed dialer that came on the rom it seems to be more accurate.. Also how to use my earbud to prompt the command, i cant get that squared away with either applications. Anyone have a suggestion?
How did you get rid of the message? Even though I installed the cab, assigned the button (button 4 hold), it is still giving me annoying VoiceCMD error like yours. Can you do a create a brief procedure? Is it a simple reg edit? Where? Thanks... Hope to hear from you soon.
Can someone post or PM me another link to download MS voice command? the two links above are not working. Thanks
thenyccharles said:
Can someone post or PM me another link to download MS voice command? the two links above are not working. Thanks
Click to expand...
Click to collapse
I don't or can't use Voice Command. Trying to uninstall Voice Command as it does not work for me at all.
Here is a Cab file for Voice Speed Dial. Installed it yesterday on my Wing and it works great. Try it and you may want it instead of Voice Command. I think it does everything better than VC. Let me know your opinion.
Thanks I will give it a try...
asctony said:
I don't or can't use Voice Command. Trying to uninstall Voice Command as it does not work for me at all.
Here is a Cab file for Voice Speed Dial. Installed it yesterday on my Wing and it works great. Try it and you may want it instead of Voice Command. I think it does everything better than VC. Let me know your opinion.
Click to expand...
Click to collapse
Thanks. this version works well.....
asctony said:
I don't or can't use Voice Command. Trying to uninstall Voice Command as it does not work for me at all.
Here is a Cab file for Voice Speed Dial. Installed it yesterday on my Wing and it works great. Try it and you may want it instead of Voice Command. I think it does everything better than VC. Let me know your opinion.
Click to expand...
Click to collapse
Thank for file
Thanks. Works fine on my HTC P4351 (Wing) with ROM JustStable-Micro 6.1
does it work for WM6.5?
i have omnia i900
after i flashed it, i can't use voice speed dial
i read the post later, and he said he removed it
Thay is what I am wondering as well. That is the only thing thay I notice in Glass v.10 as being a bug - when I press and hold the button I get an error saying "the fole voicecmd cannot be found."
Like most of you out there. I was very frustrate with the available version of Microsoft Voice Command because it doesn't seem to work properly on the Diamond. I played around with it for a few days and found a mod that allow it to work, but it doesn't seem to work for other who read my post. So these last few day I been doing hunting only. I happen to find a very new release of Microsoft Voice Command v1.6 Build 1.6.9213 that was design to work with Window mobile 6.1.
Here is the link.
http://www.ipmart-forum.com/showthread.php?t=274611
This version of Voice Command will install properly on your Diamond and save you all the trouble of Modding.
Also, for those of you who criticize me so much, I'm not doing this for money or anything, just try to help the community.
Love more, don't hate
Well, now you can all finally throw away that junk Cyperon Speech Commander and have a good night of sleep.
Also, I check Dutty ROM 1.8. He seem to have version 1.6.9965 which seem to be very new. I been trying to hunt this version down but with no luck. Hopefully Dutty will unlock his ROM someday so I can extract it for everyone.
is this the one currently enabled on Dutty's Rom v1.8?
kemathon said:
Well, well. Isn't it a lucky day for you folks out there. I finally got XDA MSVC_US_PPC 1.6.19209 (this is the latest version of Microsoft Voice Command) to work on HTC touch diamond!!!!
First of all how and where to get it (search engine...hint torrent)
Installation instruction.
1. After you got the Cab file, move it to your phone and run it from there
2. Installation is going to be complete with an error...
3. Press ok and close installation window.
4. use File Explorer to navigate to the Programfile/VoiceCommand
5. Copy the file called "voicecmd.exe" (hint: the one with the icon)
6. Navigate to MyDevice/Window/Startmenu/Program
7. Then tab and hold the sreen and paste as short cut there. Now you would be able to run MSVC 1.6 from the programs menu
8. You can now go to setting, and change the press long call button to use "voicecmd"
9. And voila, there you have it. Perfectly working MSVC
Here are the additional steps to make it work with your bluetooth headset.( also the credit in the bluetooth session belong to tommatt who make the first discovery of the solution)
- set HKLM\Software\Microsoft\Bluetooth\AudioGateWay -> SupportCLI to 1
- set HKLM\Software\OEM\VoiceCommand -> VoiceCmdEnable to 1
- Made a Softreset
Well, now you can all finally throw away that junk Cyperon Speech Commander and have a good night of sleep.
Click to expand...
Click to collapse
What is the exact error message you get under the installation??
I'm planing to modify the cab to work "out of the box" for the Diamond, but I don't have my phone here so I cant test the cab myself.
Duttys
I'm using the one on Duttys ROM and its pretty wicked
I expected it to be a bit naf but its just very good and practical too.
sdc77 said:
I'm using the one on Duttys ROM and its pretty wicked
I expected it to be a bit naf but its just very good and practical too.
Click to expand...
Click to collapse
silly question but what does it do, the voice command that is?
allsorts
It allows you to call any contact by speaking into a headset or at the phone
f ex "call david smith" and it will ask you if you want to call his landline or mobile and you can confirm.
it allows you to launch any program..
f ex "open tomtom navigator" starts tomtom ...
allows you to play music.. list appointments..etc etc and all this with no 'voice training'
This page shows you what can be done with it
http://www.microsoft.com/windowsmobile/en-us/help/more/voice-command-tutorials.mspx
How do I enable a Long press on my handfree cable? Something like Ceb commander, it will activate the program when I had a long press on the handfree set
Hi. I've downloded the voice command application. But i'm having problems assigning a button for it. When i go into <settings, buttons> there arn't any buttons there for me to assign voicecmd to. Where do i get the buttons in the list from?
ehm.... MS Voice Command is working on my Diamond since two month! So, where is the news?
sushilange said:
ehm.... MS Voice Command is working on my Diamond since two month! So, where is the news?
Click to expand...
Click to collapse
Same here.
excuse me~~~
where can i download the cab??
holyfox said:
excuse me~~~
where can i download the cab??
Click to expand...
Click to collapse
39$
http://www.microsoft.com/products/i...7701-4eaf-8435-1cef3ec9f7ff&type=ovr#HowToBuy
electrocat said:
39$
http://www.microsoft.com/products/i...7701-4eaf-8435-1cef3ec9f7ff&type=ovr#HowToBuy
Click to expand...
Click to collapse
I beleive VC 1.6 comes on all WM6.1 ROMs now, if not HTC has been providing them for me in their ROMs. They have always worked well even over Bluetooh except on TI OMAPI devices.
This maybe helpful though for people with WM5 and older.
Jcostanza4
Wow, that is great news!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I've got it working and it works pretty good!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Also, you are a hero with interpunction!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I mean, one exclamation mark wouldn't have done it!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Awesome!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
The Voice Command is assigned to the "Hold" button... which is the "Hold" button anyway?
I have tried to press every button, but nothing happens...
Voice commander didn't work for me. When installation starts i get an error and installation does not create Programfile/VoiceCommand. May be my ROM is the problem?
Thanks
ROM 1.93.405.1WWE HTC Diamond
This is so crap. First I installed ms voice command and of course it wasnt good for me because names are in romanian and it only recognizez english names.
I modified something and now i cant get the original voice dialler to work with my bluetooth
My voice command works just fine with my Jawbone and Diamond CDMA
German Version
Hi.
I have installed the cab without any errors and it works fine. But it will be better for me to have a german version. It´s not so easy to pronounce the german last names in english. It would be nice, if someone could tell me, where to get a german version.
Thanks
madmax07
sushilange said:
ehm.... MS Voice Command is working on my Diamond since two month! So, where is the news?
Click to expand...
Click to collapse
He said this is better. Didn't say the current one doesn't work.
I have a HTC Diamond and use a bluetooth headset
I need an app that can work through voicehurtig to tell me the hour without taking my phone out of pocket
maybe there is one somewhere, but i havent found any, so if you have any ideas would be great
sometimes im running so the ideal would be that it work with a cronometer, but im happy if it can just tell time
voice commander
richieto said:
I have a HTC Diamond and use a bluetooth headset
I need an app that can work through voicehurtig to tell me the hour without taking my phone out of pocket
maybe there is one somewhere, but i havent found any, so if you have any ideas would be great
sometimes im running so the ideal would be that it work with a cronometer, but im happy if it can just tell time
Click to expand...
Click to collapse
I think the voice commander application from original HTC Diamond already has.
All you need just say
"what time is it" and it will give you the correct time CMIIW
I don't know if it work with BT headset, but it work for me with original headset
I have in my HTC Diamond one program which is VoiceHurtigNummer
Cyberon Voice Speed Dial
Version 1.2 Build 080227
Cyberon Corporation
but does not allow me to configure anything but numbers and programs, do you have any idea if i can update it or download another better that works with extra features, like the Time?
I think cyberon voice commander is already built in on the original ROM of TD, but I don't know if the ROM different in every country.
about a year ago, I have a program called microsoft voice command.. It's similiar to cyberon voice commander, but I lost the linked..
it have all the cyberon voice commander function + the function to speak up the caller name on phone call..
Unfortunately that program also lost when I hard Reset my device, and I don't have the .cab file
maybe if you find microsoft voice command, you can give me the link
I found the Microsoft Voice Command that you're looking for.
Because i'm new I can't post a outside link.
So if you want it PM me and I send you the link
Bye