Plz help- phone number changed...? - Touch CDMA General

Hey everyone just have a question about how i change my touch's phone number...
if you goto start > settings > phone at the very top of that page is suppose to be your phone number greyed out followed by editiable fields for voicemail, ring type, ring tone etc etc...
im not sure what i did but i accedently changed the greyed out phone number part!!
can anyone please tell me how to change that.. is there a ## code or something i can do somewhere.
any help would be much appreciated... thank you?

ok someone told me to "ok go to ##778# epst edit then nam settings" but when i go there it asks me for an unlock code before i can edit anything.. i dont know the code is there anyway around this or what do i have to to?
please help phone is useless
thank you

if your on sprint,
Private message me with your esn and phone number and i can get you the programing info

im on bell... any chance that info will work??

i dont know how they go about programing their phones, and it wont show up in my system

Why don't you just call Bell?

lol, call bell, lol, sure if you like to talking to monkeys.
search for GetSPC and follow the installation and usage instructions...
that'll give you the code you need to follow kash-alp's advice in post 2, and from there bob's your uncle.

Related

Activate SPrint HTC MOGUL 6800

Ok. Hi ya'll. My boyfriend and I have an account together but I'm always going on to are account he blocked me from me there. Well yesterday the genius that I am tried to reset my phone so here I am pressing ##786#, not knowing that it was going to delete everything like my number. So I call Sprint today and they wont let me get into the account what I wanna know is if any of ya'll know that ## number so I could activate it. I know my msid already I just need that dam ## number....so please Help!:
I believe that you want ##778#, but to do any editing, you need your MSL. There is a program called GetSPC that uses your HEX-based ESN to calculate your MSL unlock code.
You can find your HEX ESN behind your battery. Make sure you use proper capitalization when using GetSPC.
the only problem is you can get all of those numbers but without a sprint rep pressing those magic buttons on their end your phone will just say that your account can not be validated if he blocked you off the account and wont give you access to it you cant activate the phone. if you both are on same account just have him do it. without his or sprints help you might as well go outside and find a rock and try to make phone calls with that because thats what your phone will be. sorry if im coming off harsh but its true lol. good luck.
On the mogul you can get your MSL simply...
I will have to look up the codes for it, but the just of it is.
## something for diag mode ##
restart phone let it run for like 4 minutes, then disable diag mode, and it creates a text file which contains the MSL
I found it on xda somewhere, will do some research

New Sprint TV ROM. Error at Start up

I installed the Sprint TV cab that comes with the new ROM but every time I start the application I get this message.
Unable to get billing system indicator for the MDN(12)
MDN : ##########
CID : AFB52 - 73E8C- 16332
I noticed that the value of MDN is supposed to be my phone number but it's wrong. One of the numbers does not match with my phone number and I'm pretty sure that's what the problem is but I don't know how to change my device's phone number
Does anyone know how to change the phone number on Windows Mobile???
I'm sure the information is on this forum somewhere, but I'd say just give sprint a call. I can't rem. the exact steps so I won't tell you them as I don't want you wrecking your phone due to my poor memory...
I do know when I ported my number after getting my Mogul on Tuesday I was walked through some steps punching in various codes and the like and I was able to edit the phone number and something else on my phone.
jrobertiko said:
I installed the Sprint TV cab that comes with the new ROM but every time I start the application I get this message.
Unable to get billing system indicator for the MDN(12)
MDN : ##########
CID : AFB52 - 73E8C- 16332
I noticed that the value of MDN is supposed to be my phone number but it's wrong. One of the numbers does not match with my phone number and I'm pretty sure that's what the problem is but I don't know how to change my device's phone number
Does anyone know how to change the phone number on Windows Mobile???
Click to expand...
Click to collapse
I have the same problem with my Touch Pro. How do we change the MDN without going through Sprint CS? I have had enough of their crappy CS so I would rather get the info through the helpful mates on this forum.
dial ##778# send
then enter your MSL code, select edit, then select VIEW softkey, select NAM settings, there you'll find MDN, tap and hold with stylus and edit.
Hope this helps.
Oops, I just realized how old this was. Sorry, as it's probably already been resolved for the OP long ago.

Contacts numbers problem.....

Hey guys... not sure if i'm dumb, but i cant seem to figure out how to add additional numbers to the saved numbers in contacts without saving them.
for example, i have a contact named "keith" with the saved tel number 1234567. i do not want to change this. But if i were roaming and needed to add some numbers how do i do it? let's say i needed to press *108*611234567#... how do i add the additional numbers without saving it.
Thanks in advance!
Not sure I understand you.
You want to be able to add new numbers to existing contacts WITHOUT SAVING THEM?
Is this correct?
If you dial a number and you want to save this to an existing contact you can do this.
Its very simple. Simply select the number you want on your phone dial screen > Push Menu > Save to Contacts > Yes, To existing Contact > then select contact
thanks for the reply spartan...
if i can make it clearer....
i already have a saved number... "1234567" but if i am roaming overseas i might have to add a code to be able to call out. i do not want to permanently add these to the saved numbers. With sony ericsson, i just had to call the contact, cancel the call and add additional numbers on the dialing screen.
Unfortunately I am not aware of any way of doing this.
What may help is if you ring somebody. Obviously there number will appear below there name on dial screen. Now that you can see it you can type in their number again with code infront.
Hopefully I am mistaken and there is another way of doing this. Maybe somebody else can enlighten us. I will try searching and see if I can find anything. If I do I'll report back!!
yeah tat's what i am currently doing, but my memory's not too good so i have to write it down... thanks for your help.... i've tried searching about this too but didnt find anything... if i manage to i will also post it...

Phone number in about phone????

DOES ANYONE KNOW HOW TO PROGRAM MY NUMBER. FOR EXAMPLE IF I CLICK ON TIKL WHICH IS A WALKIE TALKIE THAT GOES BY YOUR PHONE NUMBER IT WONT LET ME USE IT BECAUSE, MY PHONE DOESNT RECOGNIZE MY TELEFONE NUMBER.... DOES ANYONE KNOW HOW TO PROgram the phone number into the phone, sorry about the caps lock didnt notice.... im using simple mobile....thanks please pm me on this if you know anything about this thanks
It would have been actually helpful if you stated which rom you used. But ill take it as CM7 as its very common problem.
Settings> Call Settings> Additional settings> My phone number.
So when you assign it there it shows up under about phone.
if you google your question, it would suggest calling tmobile to configure the sim phone number for you...im running on stock. or just use facebook contacts

[Q] Dialer Codes

any one know the dialer codes to access these phones internal settings? I'm flashing this phone to cricket for a friend and need them to properly set it up
Thanks guys in advance
One code is ##PROGRAM (and the security code it'll ask for is all zeroes)
There's another one, but I can't remember what it is.
Thanks man excatly what I needed to get to his MDN and MIN settings much appreciate it!

Categories

Resources