Database Users

Damn phone keeps turning itself on

Upgraded to the new 1.60 ROM hoping to cure this annoying problem but if anything its worse.
I turn the phone off and within 5 minutes its turned itself back on for no apparent reason. No notifications or anything. Cant be doing my battery life any good if it keeps switching on
Any ideas?

That may be something to do with the way that ActiveSync is set up.
I've had this kind of problem in the past and found that by killing activesync by using a task manager of some variety and changing my 'network' settings that the problem goes away

Please excuse me, im quite a newbie at this xda malarky. My xda also turns its self on randomly since installing 2003. you said change your network settings. How and what do you change them to? I made sure that activsync is turned off, but it doesnt make much difference either way.
cheers

I have experienced the same...
And, I've been on multiple ROM's with no avail.
I'm not sure anyone has ever found a solution.

My activesync is turned off, but the damned thing keeps turning on. Its sitting in the cradle at present and it turns on every 3-4 minutes!!!

It is Active Sync
I had this problem with my charger in the car. It is not sufficient to kill the Activesync. You would have to go to the options in the Activesyn menu, go to the new options button in the PC tab (the first one) and there disable the box with the name "Enable PC sync using this connection". This you will have to enable each time you want to sync via the cradle. I don't have the problem in the original cradle, it is only with the thirdparty car charger. I sync via IR or bluetooth and that is always available via the menu in Active Sync.
Good luck!
Johan

ActiveSync i can understand when its in the cradle but currently its sitting on my desk and still turning on at random intervals sometimes 30 secs after i switch it off!!!

Signal strength maybe?
I have same problem, happens mostly in car but not exclusively.
I get the feeling that it's related to the cellular signal strength and the device loosing or regaining the GSM connection.
San Francisco has several zero or almost zero coverage areas so it's not unusual for a phone to loose and then regain a connection while driving or walking.
I would love this device if it worked as expected but at this moment it is the source of endless frustration.

im also having these problems they are head doing never used to turn itself on as soon as i hard reset it just started to do this now and its annoying me so much

Im also having these problems . I find a solution using registry cleaner of pocket mechanic.
Bye

Guys, Check the setting of the ActivSync, most probably you will find a schedule for synchronization is set every certain time. So, you have to switch it to Manual Sync.
I think this should soulve your problem.

Sprite Backup
I too had this problem. For some reason the enabling Sprite Backup battery monitoring and Scheduled Backups caused this. try turning these features off if you have it installed.

I have same problem, its really anoying, have not found a way to stop auto connection even after changing some setting on my computer Activesync & XDAii activesync. I'm guessing theres no way to stop it.
Is there an active sync update available? I'm using 3.7 (build 3083)

For those whose unit turns on by itself, please check:
From your PPC:
Start > ActiveSync > Tools> Options > Mobile Schedule
Make sure all 3 options are set to "Manually".
From your Desktop PC ActiveSync:
Tools > Options > Schedule
Make sure every active options are set to "Manually" as well.

You can manually sync but Activesync still keeps "looking for changes"

I need for help plsssss
if some body plsssss attch the last eddition of xda2nbftools because I am living in Saudi Arabia, and the web site to can download this file is BLOCKED here in Saudi Arabia, they are blocking web sites here then u can't open it at all and no way to can download it unless if it attached here in this forum

Here is it:

Same for me too,
Mine can turn itself on almost as soon as i turn it off, its a running battle to get it to turn off and i very rarely win, I have accepted the fact that mine will stay on most of the time now and have a second battery to help me through the day,
I checked all my settings and all mobile schedule settings were on manual and all the active options are set to manual too, so it wasnt those settings causing the problem,
I cant believe the lack of support that O2 are providing, if this was an HP handheld there would have been a fix for each problem as it cropped up within a week as they have done with each of their handhelds

do the people experiancing turn ons have a card in the Sd slot? i do but i notice when the device is off...... put a sd card in and the device turns itself on i only started to notice it turning on when i got my SD card i might take it out tonight and try then?

Yup, i have a card in the slot all the time, took it out for a few hours this morning and it was no different, still kept turning itself on,
I looked a bit deeper into it this morning too,
It seems that i use it, turn it off and it turns back on 13 seconds later, i turn it off again and it turns itself back on again 13 seconds later, so i try to turn it off and the power button has no effect, i have to press it twice to turn it off, then it seems to stay off for at least 30 minutes before going through the exact same sequence again,
I will list all my installed programs a bit later when i have more time, hopefully everone else can do the same (whether you have the problem or not) then we can see if there's a common program that is on all the XDA2's that might be making them turn on and see if its absent from the XDA2's that are fine

Screen keeps turning on

Hi guys
I'm pretty sure I've seen a post about this before, but whatever I search for I can't find it now... typical! lol!
For the past week or so, every time I turn the screen off on my Wizard, a few seconds later it turns itself back on for no apparent reason... it then times out and turns off again only to wake itself back up a few seconds later.
If i leave it, it seems it will do this forever and it means my battery is getting drained very quickly... this has only happened recently and I haven't installed any new software recently so I'm not sure what's caused it...
One possible pointer is that if I run "Check Notifications" to remove duplicate alarm events the problem is cured, but also all my alarms (set in clock) stop working unless i go in turn them off and then turn them back on again... but this causes the problem to appear again!
Any help or ideas would be greatly appreciated since at the moment i'm having to charge every day
Cheers
Pope <><

I am not 100% sure but it may be some app is starting up your phone. Have you used the 'Activesync Workaround' -- Activesync likes to start itself up even if you are not connected via USB so this may be a cause?
to prevent Activesync from starting up periodically do the following:
Open Activesync on your PPC
Menu>Add Server Source...
Type a bogus server address. Next fill in the fields with anything. Finish.
Menu>Schedule...
Sync during... [change both peak and off peak] to Manually. Ok.
Really Close Activesync [not minimize] then start it up again.
Menu> Options > Delete the BOGUS SERVER you made.
Click to expand...
Click to collapse
If the problem persists try checking your apps some of them may be requesting for your device to startup.

Device crashes at night

Every night when i leave my device plugged in to the charger and go to bed, i see it frozen by the time i wake up. Its locked up, and nothing works apart from soft reseting it....
ever since i installed the new qtek rom....anyone else having these problems?
thanks,
San

Hi. I am having the same problem with my MDA Universal.
It crashes almost every night (somewhere between 1am and 8am) and can't be re-started other than resetting it. Not even incoming calls go through or the alarm clock goes off.
Sometimes it even happens during the day. Especially when I disconnect it from my computer and the device is in standby.
Did you find a fix for this?

Programs running?
I had this problem with SPB Backup, fixed by using the new version and not having it run off the miniSD card.

Hi,
Did you tried to desactivate AS on wireless exchange by the old well known method?
Don't forget that, like any pda on windows mobile, your 9000 will turn on at 00h00 for refreshing notifications and other internal stufs. If the programmed time for doing these actions is to short, the pda will freeze. It's also a known issue since win2003 first edition. There are tweaks to increase the programmed power-on time at midnight...

What exactly do you mean with AS on wireless exchange mode?
I active sync by USB and don't use AS wireless...

It's a well know issue about AS, for all pda under win2005 (not only HTC but HP, and so). AS if you only synchronize your device with USB or BT, there is a trace in the registry that defines an exchange serveur for automatic sync...wich is not listed in the parameters of AS on the pda. SO, you have to enter these parameters, create a new exchange partnership with random parameters, define the synchronisation on manuel mode and not automatic, validate your new partnership, close AS, re-enter AS and delete the new set you've made. And that's all.
This issue may cause freezing of pda while inactive...with a softreset to power on... or battery draining on the night... (HP ipaq 2000 series).

it frozen when the light blink green -> batterry full. this is main resion..anybody can help me to slove this case...
help??????????

hmm i have the similar problem but when i looked closely it was just that the brightness (when phoen on battery) option was turned to 0 wautomatically. so u guys shud check out it thats the case with you.

You guys should first post your ROM versions, especially since some of you say that it happened after an upgrade...

WM5 automated nightly reboot?

I have a question. I've only had a WM5 device for about 9 months now. I now have Cingular 8525 and for the past 5 days I have left it on overnight only to find it frozen, won't wake up in the morning and the battery drained.
I did the Activesync hack, scanned the notifications queue and did not see any notifications for midnight on the dates the device would not wake up.
Its frustrating.
I was wondering if WM5 did some form of house cleaning nightly. It seems that this house cleaning wakes up the device and somewhere it freezes on and finally the battery gives out. I don't have any backup software going on.. Nothing. I just find the device won't wake up, won't even soft reset. Plug it in for a minute, then it soft resets with a dead battery.
I am going to look at the notifications queue tonight and delete any notifications I see that are for 0:00 and tomorrow and see what happens.
I am hard resetting it Monday and re-installing if I can't figure it out. It has been really annoying these last 5 mornings.
Sometime when I reboot I see a NO GSM message. Then get no radio, then about 10 minutes later I get service. But the password and the userid on the wap data connection has been erased and my bonded blue tooth headset password is forgotten, the device is there but it prompts me to bond with a passkey when I go to intiate the headset...
Thanks for your thoughts

This has, I believe, alot to do with your microSD card - see the link below.
http://forum.xda-developers.com/showthread.php?t=284636

Thanks I'll check it out. I do have a sd card in the device. It may be the cause.
Thanks.

I use SPB Backup, to initiate automated reboots. What it does is back up to ur microsd and then initiate a reboot. i do this every second night. which is cool, keeps the fone fast.

Nightly lockups were a pain in the neck for me - I have had 2 Orange M3100 and both suffered the same nightly lockup issues.
I found that 4 things have fixed the issues and i found that all 4 have to be done
1. Fake server trick
http://www.aximsite.com/boards/showthread.php?t=112638
But i found that not deleting the new server works fine
2. Untick Enable Advanced Network Functionality
Under Settings\Connections\USB to PC
3. Stopping Activesync running when not needed
In the notification queue there are 3 entries to start replog.exe (activesync)
you can safely delete the instruction to start after time change - This will stop Activesync from running.
NB the other 2 need to be there, do not delete any other notification of replog.exe
4. Never leave activesync running so always do a soft reset after syncing or at least before you charge the phone.
Not saying that these will work for everyone but they have worked for me on both phones.

try XBar. It incorporates cron, so you can schedule whatever program to run whenever you want it. Grap a copy of quickreset and run it. It will reset the Tytn at whatever time you set it for. I have mine resetting at 5 in the morning.

You may disable the standby mode when the unit on the external power supply. I have done, and I think it's not a big deal and it does not worth to struggle with locks on wakeups with external power!

I having a sort of similar 'morning trouble' with my TyTN, but limited to GSM connectivity. When I wake up, I am most of the cases disconnected from network with 'No service' message in the baloon. Searching for network is unsuccessful, nothing works until I soft reset the device.

Just a thought: You do have the "poweroff after x minutes" setting checked right?
I had what I thought was the same issue this morning, but it was caused by me unchecking the above setting (I do this during meetings when I'm using my BT keyboard) the previous day. This morning, while it was still dark out, I pressed the power button and nothing (the backlight was off and this actually put it into powersave mode). I pressed it again and still nothing (device came out of powersave mode with backlight still off). Because it was dark when I did this, I initially thought that I had the "won't return from powersave" problem.

machmandp said:
Nightly lockups were a pain in the neck for me - I have had 2 Orange M3100 and both suffered the same nightly lockup issues.
I found that 4 things have fixed the issues and i found that all 4 have to be done
1. Fake server trick
http://www.aximsite.com/boards/showthread.php?t=112638
But i found that not deleting the new server works fine
2. Untick Enable Advanced Network Functionality
Under Settings\Connections\USB to PC
3. Stopping Activesync running when not needed
In the notification queue there are 3 entries to start replog.exe (activesync)
you can safely delete the instruction to start after time change - This will stop Activesync from running.
NB the other 2 need to be there, do not delete any other notification of replog.exe
4. Never leave activesync running so always do a soft reset after syncing or at least before you charge the phone.
Not saying that these will work for everyone but they have worked for me on both phones.
Click to expand...
Click to collapse
I have a similar problem. Every monring when the device is still plugged on the wall charger, it hangs before I wake up. I would therefore miss a lot of calls or other notifications. I have done the defragmentation of the card, but it still doing the same thing every morning.
I have also tried all your steps above, ecept step 3, which I need your assistance as to how to delete the particular file you were referring to.
Many thanks in advance.

marsb007 said:
try XBar. It incorporates cron, so you can schedule whatever program to run whenever you want it. Grap a copy of quickreset and run it. It will reset the Tytn at whatever time you set it for. I have mine resetting at 5 in the morning.
Click to expand...
Click to collapse
holy crap, i thought i was the only one that used xbar.. i have been using this program for 2 or 3 years, this is my one and only must have program!! FYI 3.2 beta was released
anyway.. on to this problem, i used to have this on my wizard, what i found was that plugging it and leaving it on would cause the lock up. Now when i plug it in i hit the power button and havent experienced it since on my wizard or on my 8525 yet. and i still get all of my push mails etc.. however i will say that if i get a call or text while im sleeping the device does wake up and the screen stays on..

another program you might want to try is SKSchema... they have several scripts that you can run, including a soft reset at a certain time. I also use the script which allows me to toggle between 3G/UMTS to save battery when I don't need 3G.

"Fake Server" did not work for me
Tried what is outlined - fake server, soft-re-boot, stopping activesync. Not sure how to delete the specific files in the notification queue.
Worked for one night! Next night back to the sleeping Tytn.
I am going to try spbTime to trigger an alarm at 12:01am and see if that helps.

TyTn does not "die" anymore!
The fake server is definitely part of the answer. As is stopping ActiveSynch. This needs to be combined with one other suggestion made on the forum of leaving the unit on when plugged in. This however has the potential drawback of "burning" the screen with the same image as when left powered on.
In addition to Activesynch, the problem is with the Notification queue (again as someone suggested on this forum). In the Suspend/Sleep mode under power, the unit cannot notify and goes into a perpetual loop.
Here is what I did that has now worked for 11 days. I installed spb PocketPlus and placed the "Screen Toggle" icon on the main screen. (According to spb, "Toggle" simply blanks the screen but does not put it to sleep/Suspend). So when I plug the unit in to charge it, I simply "toggle" the screen. The screen is blank (just like "Sleep"/"Suspend") but the unit is powered up. This has the added benefit of allowing you to listen to music with the screen blank.
I have now gotten to "toggling" even under battery power. Miraculously, my intermittent BT and Wi Fi issues have also disappeared. There may be cheaper solutions than buying Pocket Plus, but spb's Pocket Plus is convenient and has some other nice features.

Mortsaver might be a cheaper option?

Active Sync
I don't know if any of you have tried Active Sync "beta" 4.5". Its seems to have fixed many of my problems with connection and some of the issues described here.
flane

coolshot said:
This however has the potential drawback of "burning" the screen with the same image as when left powered on.
Click to expand...
Click to collapse
This problem affects CRT and plasma displays (phosphor based), but not TFT.

ActiveSync in tsk manager

Just wondering if anyone can shed any light on an issue that has just recently hit my HD2.
For no reason what-so-ever, ActiveSync suddenly appears in my Task manager. I end all tasks, and at some random time in the future, its suddenly there again. whether the phone has been used or not.
Every now and then, i get the same problems as some others on here, with a sudden drainage of the battery overnight, and i wondered if there could be some connection. I do have G Alarm, which seems to get mentioned when discussing battery drainage, but i have no alarms running.
The only other thing added recently was the windows live update.
I don't know if the activesync issue is having an effect on the phone or not, but it is annoying that it keeps appearing in the Task manager !!
Thanks in advance for any help.

I have activesync appearing, when not even using it for anything.
I assume windows live uses it for email and contacts, despite everything being set to manual; it actives itself.