hi,
i don't know what's happen, i have this bad message and i can't connect IE to internet.
My connection is ok ; MSN weather is uptodate.
please do you have an idea ? (may be user agent ?)
thx.
Regx.
Had similar problems with 98 rom in france, in netherlands no problem. In the post from chanvi93:
Recommandations :
* "Move to up" Tools; Utility; Short cut; all you need folders .
* Only FRA version : "Region settings" ( Paramètres régionaux) is set in Belgium and don't change it , because France is not in WM 6.5 test country .
Can it be that this has something to do with it?
Did you installed the Corr._STKServices.cab from the post install folder and did you properly set up the provider?
Adejager1 : thanks for your answer.
the settings are ok.
The connection doesn't start when i click on IE but if i start RSS and i click on a link IE is connected.
Related
I downloaded Othman's updates (RUU 3.16.52, RSU 3.23.01), onto a UK O2 XDA. Also downloaded IR COMM program from http://www.ircomm2k.de set it to COMM 2 where my IR port connects to. Then created a standard 9600bps modem connecting to IRCOMM's virtual COMM port on COM 7, and set the control flow to none. It seems to connect (yellow light shows on WModem app) but doesn't get any further than that. In the modem's properties I did a dianostics test, here are the results.
http://www.markhorgan.com/temp/ModemLog_Standard_9600_bps_Modem.txt
Has anybody any ideas?
PS Just in case anybody else is trying to connect to the internet on a Irish Vodafone/Eircell ready-to-go account here is some info:
number:0876202222 (cheaper than landline ISPs)
username:vodafone
password:vodafone
Data type: ISDN
Primary DNS: 213.233.128.1
Secondary DNS: 213.233.128.19
SMTP Server:mail.e-merge.ie
Still can't get it working, but here's a PDF I came across that might work for those that have the latest 02 ROM (which doesn't seem to be downloadable for some reason)
http://www.o2.co.uk/business/productsservices/mobileweb/CTS1299-1 Setup Xda Modem.PDF
Hi,
Please let me know where to find Othman's updates (RUU 3.16.52, RSU 3.23.01).
Thanks.
Surprise when will you annouce it?!
Hi Markh,
Please, can you assist.
I have a german OS and like to change to english.
I have followed your explanation and get always the error message:
"error 007: no rom image file
Cannot find rom image to upgrade your PocketPC
Please download and try again"
I modified the 007 to 001 with hex edit.
Try following the instructions at http://www.markhorgan.com/qtek-rom-update/
I haven't come across your problem before, the only thing I can think of is that windows might be locking the ROM file (NK.nbf), save the file and close HexEdit before you continue the installation process, or RUU 3.16.52 might be corrupted - try downloading it again.
Hi,
I followed the steps discribed on the link ( above ).
Its always giving me this error.
I thought It might be because I have german OS on and try to upgrade with an english version.
I tried the O2 Dutch 3.15.15 from their webpage and the 3.16.52 from markh.
I cross checked this by loading the german 3.14.16.ger from the german O2 page. That worked fine.
8)
I have jasjar with latest rom from imate.
I have two major problem with my operator: TIM
1. follwing all the instructions about MMS on the TIM website I still get an error, receiving and sending MMS
2. changing the pin, I get "unknown sim error". I tried with two different sim, an old 32kB and a new one 128kB.
Any other italian reader with kaskar and TIM?
thanks
Rosario
Hi, I'm Italian and I get it working.
You need to:
1) set a new connection (I put it in My Work Connection): name timMMS,select a modem:Cellular Line (GPRS,3G),Access Point name: mms.tim.it
2) go to mms configuration (it's in the menu in the messaging centre), and you put the data you can find here: www.i.tim.it/file/0,,774,00.pdf
So server name TIM_mms (or whatsoever), gateway 213.230.130.89, port number 9201, server address http://mms.tim.it/servlets/mms
connect via Work, and IMPORTANT: choose Wap version WAP 1.2, not 2.0 or it doesn't work
Ciao
I configured it in this way too. But no luck, I still get an error after 30 secs sending messages, or retriving it.
Very strange, same sim, same parameters but different phone and everything works great.
I don't understand why in some jasjar they work and in others they don't.
Do you get an error when you try to change the pin code to you sim?
thanks
ciao
anyone of you got the MobileTV working ... which are the RTSP addresses ?
rpingar, I disabled the pin code.
Maybe you should try this (I haven't a clue, but...)
Please pay attention to put it in WAP mode 1.2
i have problem with wifi if i connect to wifi network (secured or unsecured) it connect but i can use only ICQ Internet explorer or Opera show error messages ...
Opera : "Could not connect to proxy server. Access denieded"
IE : "The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later."
Connection is good so connection lost can't be the problem ...
I try also HR (hardreset) and still not working ...
my device : HP Ipaq rw6815 WM 5
pls help me i wan't to use full wifi connection (browsing the web)
no one ? pls help me
ok, man. It's common proble. Wi-Fi is a problem of this model but if you know how to deal with you can get along with it.
Step 1: soft reset you device
Step 2: run SelfTest (Start>Programms>Selftest)
Step 3: mark WiFi (to test - should become red)
Step 4: when will be shown MAC address mean that's ok
Step 5: exit (it will offer you to soft-reset - DON'T DO IT)
- try this one and tell me what happen. It works with mine.
Hi,
I would like to create a scheduled task that will launch Internet explorer every day in a specific website.
This website will then be connected to radio on the web through wifi.
Actually, I can enable the wifi and launch IE.
Now I would like to connect to the specific website but I can't find how with MortScript.
Here is my script
Code:
# RunIE.mscr - start the default data connection and load IE
#Wifi Activation
Run ( "\Temp\AEBPlus_Switch_WiFi_Off_On.lnk")
Sleep 5000
# Internet explorer connecting to radios.wm.free.fr
Run ( "\Windows\iexplore.exe", http://radios.wm.free.fr/player?cat=1&radio=nrj&type=asx)
But it doesn't work :-(
The url is not passed to Internet Explorer.
Please could you help me ?
Thank you
I'd try to put quotes around the url:
Run ( "\Windows\iexplore.exe", "http://radios.wm.free.fr/player?cat=1&radio=nrj&type=asx")
or another thing you might try is to put the url in a local file and call it as your parameter.
Thanks joe !
the url about quotes is working fine !
Now I am trying to find a task scheduler !
I have tried RunEveyDay.exe (from xda-developers) but it doesn't work on my WM5
If you have any idea ... =))
P.S: My goal is to be waken up by a web radio
Hi guys
Since two days I trying to find of reason of this message :
ERROR HTTP 403 (Access denied)
It appears only when I lunch IE on my Diamond 2 withflased WM6.5 from http://dr-jo.populus.org/rub/1
I change the user agent but nothing to do. However, I have no issue with Opera
Any help please ?
Forward Thks
For any one who comes thru ...
Internet Explorer --> tools --> options --> Others
Change from desktop to mobile