While trying to upgrade my ROM from WM5 to WM6.1, I seem to have bricked my SMT5600. I was trying to use the mtty tool, but USB option wouldn't come up. So I then tried to reboot and now it gets stuck while booting on the splash screen. That is with the Audiovox splash screen in the background with the following displayed over it:
Typhoon PV/DVT
IPL 1.00
SPL 1.01.0109
GSM 11.3.13.80
Clean HIVE (1): N
Format Par. (2): N
HEEELP Please!!!
Go through the whole process again following the instructions very carefully step by step. I did the same thing and have recovered my Imate SP3. The lock-up happens if you get one of the steps wrong. It's been a few weeks so I cannot remember which one exactly.
Related
hello I have a wizard G3 Ipl 1.01 Spl 1.06. it was in netherland. I made the stupidity to flash it with shell tool and a french wm6. First it run and I was very Happy But when i restarted it with my sim card it stayed in splash screen . I tried evrything wisard_love other Roms. Nothing always Splash screen either with the beer or with wisard_love image please tell me what to do.
I've tried to flash many roms, but gotten error at 3-5%.
Screen on my pda goes black and pda resstarting...
Please someone can explain, how to flash step by step, and what is reason for error?
When i switch it on I see:
ipl 3.04.0001
spl 3.04.0000
gsm 03.06.90
os 3.4.0.0
win: 6.0 by ferfecir
Now i done I don't know what!
When i go into hardreset, after, i see only IPL and SPL versions without GSM and OS. I do hardreset, cos I can't switch on by POWER button!
Please can someone help me to unlock SPL and reflash normally ROM?
All image files which i've tried to flash trough BOOTLOADER USB mode getting error on 3 - 79%...
Dear All,
Please urgent help required.
my HTC P3300 (Artemis) stuck up when i was trying to start it up. when i use to turn my cell on, i goes to the starting screen shows the following numbers and then stuck up.
IPL 3.07.0001
SPL 3.07.0000
GSM 02.69.90
OS 3.7.0.0
the screen does not move after that. i tried soft reset through the reset button but result is the same.
i also tried hard reset and when i puch the green phone button to proceed, a message come "FORMAT FAILED" and the phone stucks up.
i am quite a lot of problems since i have upgraded to WM6 from WM5 last week.
i am quite sucked with this problem. not been able to use my set since yesterday.
please also note that my HTC was not syncing with my PC since i have upgraded to WM6.
PLEASE HELP URGENTLY.
Nomi
You can tried to reload your last ROM (WM6), for this :
-Start in bootloader mode ("Voice Command" + "Power" + Reset with Stylus)
-Start a new upgrade Rom (With the last ROM)
It's works ?
If yes, you can upgrade Radio and SPL.
i did that but the flash process stopped at 3% (i think CID locking problem). i tried USPL but the process could not be done. i also dont have my previous ROM but i noted the previous numbers which are
IPL 1.14.0001
SPL 1.14.0000
GSM 2.67.90
OS 1.14.0.0
tell me what to do now??
i dont have my previous ROM. nor i know what were the factory provided ROM
please help
You can :
-Flash your original ROM (Operator and langage)
-USPL and 1.11.cmon (verify that your phone is USPL before another action)
-Upgrade your new ROM.
i dont have the original ROM.
the phone is stuck at boot page. USPL not working.
what to do now
You must to download a rom from the Same Operator and same location.
Hey everyone,
this is the first time I try to update a custom ROM but it seems to be stuck.
The situation:
I looked around and found Shifu's ROM which I wanted to use on my phone.
I flashed my SPL to 1.11Mobiz by following the tutorial here and that worked.
I connected my device again and synced it with ActiveSync and started the ROMUpdateUtility, followed the steps on screen and everything appeared to start up.
My device shows a red/green/blue screen with ONBL 1.11.0000 and SPL 1.11Mobiz and on my PC I get the progressbar. I tried it twice now, but for a 30 minutes progress just gets stuck at 0%.
Any advice?
TIA
Hard Reset
you can do a hard reset and then try again, I also happened to me
Machinus said:
Hey everyone,
this is the first time I try to update a custom ROM but it seems to be stuck.
The situation:
I looked around and found Shifu's ROM which I wanted to use on my phone.
I flashed my SPL to 1.11Mobiz by following the tutorial here and that worked.
I connected my device again and synced it with ActiveSync and started the ROMUpdateUtility, followed the steps on screen and everything appeared to start up.
My device shows a red/green/blue screen with ONBL 1.11.0000 and SPL 1.11Mobiz and on my PC I get the progressbar. I tried it twice now, but for a 30 minutes progress just gets stuck at 0%.
Any advice?
TIA
Click to expand...
Click to collapse
Did you try to flash original rom, just to test if everything is working OK?
Hi
Big problem.
1. CID Unlock - has worked
2. Flashed new ROM - has worked
After 100% the RUU says, Congrats... But too late i saw it was an ELFI ROM with 74MB but my Touch is an ELF 64/128.
But it booted! Once...
After the device has rebooted i made the screen settings and after windows has configured the device rebooted again.
After reboot the device doesnt come back.
I got the boot logo and then the screen will be black.
Hardreset doesnt work.
After FORMAT FAT & FORMAT IS COMPLETED the screen is always black.
Holding CAM Button and Softreset brings the Colored-Display.
IPL 2.24.0002
SPL 1.11.0000
A new CID unlock doesnt work because there is no active sync connection.
Flashing any other ROM works but it seems to have no effect.
RUU can connect but dont shows any installed image version.
If i click update the progressbar in the HTC display appears and goes to 100%.
After finished the update the device reboots and the screen is black.
Did i have erased my htc? Is there any solution for this problem?
*** EDIT ***
I tried this ht*p://forum.xda-developers.com/archive/index.php/t-359413.html
Now i have IPL 1.11.0002 an SPL 1.11.0000
Step G3/7 says:
Download T-Mobile 2.26 rom (ht*p://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship. exe.html)and flash it to your device! Done? Go to step G3 / 8
But the link is invalid. (yes ive seen the space at the . exe)
Does anyone have this file so i can try this step.
Ecosys
try upgrading the IPL/SPL to some 2.2X version. and next time post in an appropriate thread related to unbricking, u dont have to start a new thread.