Database Users

Keyboard problem, Russian ROM

I have couple of troubles with my 9100.
1. Virtual keyboard has Cyrillic layout. To write in English I have to tap au virtual key for each letter. I didnt find how to switch to English layout. It's very hard to write this message using virtual keyboard, believe me.
2. I cannot use Terminal Services client because I cannot enter English letters to specify login name and password. I tried to switch layout on sliding keyboard by it enters always Cyrillic. I tried virtual keyboard too but the same result.
I supposed any third party keyboard layout utility will help but I didnt find anything that works fine on 9100. I tried qkeys and Resco keyboard.
Does anyone know something about?

Resco works fine on mine.

Gevor said:
Resco works fine on mine.
Click to expand...
Click to collapse
Which version?

Had the very same problem.
1. Tap au key twice (fast) and it would switch to english
2. Use any registry editor to change "Keyboard layout" string value in HKCU\Software\Microsoft\Terminal Server Client\ from "00000419" to "00000409". Wait a couple of mins and soft-reset the device. After that ts client will be using english by default.

slavar said:
Had the very same problem.
1. Tap au key twice (fast) and it would switch to english
2. Use any registry editor to change "Keyboard layout" string value in HKCU\Software\Microsoft\Terminal Server Client\ from "00000419" to "00000409". Wait a couple of mins and soft-reset the device. After that ts client will be using english by default.
Click to expand...
Click to collapse
Wow! It really works! Thank you very much!
By the way how to tap @ on virtual keyboard? I cannot find it, have to use sliding keyboard...

vishny said:
By the way how to tap @ on virtual keyboard? I cannot find it, have to use sliding keyboard...
Click to expand...
Click to collapse
This is where Resco Keyboard would come in handy

Excuse me, I've found it. It appears near spacebar when shift is pressed.

Russian Rom Wanted!
Guys, can you share the firmware (rom image) ? Please!

Russian edition?

Yes, please!
Want to change language to Russian.

Touch Keyboard autoswitch between 40&20 keys (Help)

Has anyone figured out how to prevent the Original "Touch Keyboard" on the Sprint HTC Touch from switching between the 40 key version to the 20 key version?
It's anoying whenyou need to type something it chages to the 20 key.
I've looked in the registries and I can't find anything related to that.

i know there was a cab released that hacks the touch keyboard to stay only on the 40key mode but it disables the xt9 in the process, if you can live without it
http://www.sprintusers.com/forum/showthread.php?t=146118&page=2
look at post #25 your just interested in the registry hack to make it only 40key

Hi,
Thanks for the Reply. But I didn't see a CAB file there. There is a more.zip files that looks like a full keyboard installation. not really a fix to the existing keyboard.
Is there anything else?
Thanks,

suggestion: get touchpal www.cootek.com

ya its a registry entry i typed it out wrong
teste2.zip contains the reg entries to turn the 20key permanently to the 40key

bobaka said:
suggestion: get touchpal www.cootek.com
Click to expand...
Click to collapse
I tried it and Love it. But is there anyways to make it the deafult so I don't have to select it everytimeI reboot?
Thanks,

SultanH said:
I tried it and Love it. But is there anyways to make it the deafult so I don't have to select it everytimeI reboot?
Thanks,
Click to expand...
Click to collapse
search google for sipchange that allows you to set your default input device

Disable XT9 on Pharos

For someone want to Disable XT9 for input your language. Because I had problem on my Pharos. I can't see suggestion word my language on Pharos.
Thanks for Marschel this cab.
Cheersss

sorry but it doesn't work.

Work after soft-reset
daras28-82 said:
sorry but it doesn't work.
Click to expand...
Click to collapse
This Cab program, It will work after soft-reset your ppc.
Cheer

yes i know,but it hide every symbols and leave only digits,it means i still can see all symbols except xt9 but if i tap anyone it gaves me numbers on window...
works like numlock!!!
i usually use sunnysoft touch keybord and polish language and hate T9 please help

Work with Zoomboard Keyboard
daras28-82 said:
yes i know,but it hide every symbols and leave only digits,it means i still can see all symbols except xt9 but if i tap anyone it gaves me numbers on window...
works like numlock!!!
i usually use sunnysoft touch keybord and polish language and hate T9 please help
Click to expand...
Click to collapse
Pls, try with "Zoomboard" Keyboard from Vito Software see link below. I'm work very fine with this software. It had Polish(214) language.
Cheers
http://rapidshare.com/files/114462484/sym-2747.rar.html

with this keyboard it's working very nice and i like this keyboard wery much
thank you

Btw where can i download language files to this dict?
Thnaks

herpez said:
Btw where can i download language files to this dict?
Thnaks
Click to expand...
Click to collapse
I'm not clear your request.
Cheers

How to disable T9?

How to disable T9?
There's no Croatian T9 dictionary so it is really annoying to have T9 turned on.
Or maybe if there is Croatian dictionary somebody could post it or link to it?
I searched thru general forums but anything I found there doesn't work.
Thank you very much.

well on my keyboard is on the top right a shifting-button named "ABC/T9"
Just switch it to the ABC and T9 is disabled.
Or do you mean in general?

I mean general.
When my keyboard pops up T9 is usulally on. And I usually forget that and start writing. Then I have to delete what I wrote and turn off T9 with that bottun.
And every time keyboard pops out T9 is on again (except when writing contacts and maybe some other times).
It is pretty annoying.
So, I would like to disable T9 complitely. (or to get Croatian dictionary)

At \\registry\HKLM\Software\Tegic\eT9\
Set parametre XT9SupportMSSip to 0.

BigKvak said:
At \\registry\HKLM\Software\Tegic\eT9\
Set parametre XT9SupportMSSip to 0.
Click to expand...
Click to collapse
Just did this, soft reseted and started writing new SMS.
And T9 was on
Any other ideas?

Try Shcaps Advanced Config (the black banner will still stay for listing sms recipients suggesting only one recipient - unconvenient)
or
download and install the cab from post #6 in the following thread http://forum.xda-developers.com/showthread.php?t=357744

tica011 said:
Try Shcaps Advanced Config (the black banner will still stay for listing sms recipients suggesting only one recipient - unconvenient)
or
download and install the cab from post #6 in the following thread http://forum.xda-developers.com/showthread.php?t=357744
Click to expand...
Click to collapse
I installed this cab and I could only write numbers. there were no letters at all.
Then I installed Schaps Advanced Config but I couldnt find where to turn T9 off
But then I installed cab from post 11 from upper post. And it seems T9 is no more default input metod. I can turn it on but it isn't on by default.
I have to test it more but it seems it works.
P.S. I use default touch keyboard and I did all testings with it.
Thank you all for help

mane this is a good post, cause i was thinking like all day is their a way to turn it off, this whole time its been on the keyboard, ey thanks yall =)

kulen said:
How to disable T9?
There's no Croatian T9 dictionary so it is really annoying to have T9 turned on.
Or maybe if there is Croatian dictionary somebody could post it or link to it?
I searched thru general forums but anything I found there doesn't work.
Thank you very much.
Click to expand...
Click to collapse
HKLM\SOFTWARE\Tegic\eT9\IME
CarrierDefaultTextMode ="0"

MiniCM keyboard

Okey i have a dum question but how i can change the keyboard on the minicm ??? The minicm keyboard realy sucks (sorry) but i wanna orginal or some else ???

On an input press and hold. A window will come up. Select input method and check android keyboard.

sorry
Sorry i i'm a reallly big noob where is that input ???
Please say full where i need to go ! Thanks.
- Sorry about bad english

input - a white space for writing text, for example in SMS app

feliks200 said:
Sorry i i'm a reallly big noob where is that input ???
Please say full where i need to go ! Thanks.
- Sorry about bad english
Click to expand...
Click to collapse
try to compose new message..
Push
1. Messaging
2. New Message {compose new message}
below you can find {type to compose}
Long press that window
window will popup {edit text} push {input method}
then select {android keyboard}
that's it..

...input is the object in which you can write in...

THANKS.
THANKS for your help!!

Hi everyone.
I have another problem.
I have a portuguese layout with especial characters for example "ç" and this is not recognized by my imput type, what can i do?
best regards

Change keyboard language in localisation settings.

Graveir said:
Change keyboard language in localisation settings.
Click to expand...
Click to collapse
You are saying in language & keybord sattings, i believe.
I changed everywhere but the problem persists

I didn't saw, i am in x8 topic, my phone is the x10 mini pro...

ozi87 said:
You are saying in language & keybord sattings, i believe.
I changed everywhere but the problem persists
Click to expand...
Click to collapse
Yeah, my bad. Sorry. Are you sure that you're changing setting for a keyboard you're using? Because I changed settings in my htc_ime and I'm perfectly capable of making that 'c' of yours with long press on c key...

Graveir said:
Yeah, my bad. Sorry. Are you sure that you're changing setting for a keyboard you're using? Because I changed settings in my htc_ime and I'm perfectly capable of making that 'c' of yours with long press on c key...
Click to expand...
Click to collapse
Long press in "ç", i will see. thank very much