Database Users

PLEASE HELP TMAIL Will Not close!!!!

Hi everybody I have a huge irritating problem. I have a t-mbile mda and I have the latest rom and radio installed. After a soft reset everything boots up fine then after a few hours the tmail.exe. opens on the screen. I go to start menu settings click on memory and stop the tmail form running and bam it opens on its own again almost immediatley. Ive tried task managers and nothing seems to keep this tmail from opening on the today screen. I know it runs in the process area, but it opens itself after a few hours. Please help.
I cant close this app.

Have you tried checking the notification queues to see if it had itself inside there?

hanmin said:
Have you tried checking the notification queues to see if it had itself inside there?
Click to expand...
Click to collapse
Yes I checked no Tmail.exe listed but this is what is listed:
\\notification\namedevemts\vcpowerwakeupevent
\windows\calupd.exe
\windows\timewizard.exe
calnot.exe..........start on timer
calnot.exe..........start after restore from backup
calnot.exe..........start if time changes
clocknot.exe.......start on timer
clocknot.exe.......start if time changes
clocknot.exe.......start after restore from backup
repllog.exe..........start on timer
repllog.exe..........repllog.exe
repllog.exe..........start if time changes
repllog.exe..........start if RS232 connection has been detected
These are all listed in notification queue via SKtools.
Thanks

Try removing poutlook.lnk from \Windows\Startup

Menneisyys said:
Try removing poutlook.lnk from \Windows\Startup
Click to expand...
Click to collapse
Hey thanks for the help. I tried that too. Didnt work either, after a few hours tmail popped up and would'nt let me close it.
I even did a hard reset and it still popped up and would'nt close.
I installed everything on my storage card but I didnt do a format on the card I just reinserted after the hard reset and created shortcuts from programs that were installed on the card.
I think if this happens again I will format the card and do a hard reset and do a reinstall of everything.
I was just hoping someone out there had the same problem.

[B]xHelp how do i I unlock "Sufficient System Permissions" [/B]

Hi,
I have a cingular 8525 with the default cingular ROM ( will change it later want to wait a litle while)
I am trying to install a Cab and i get this notification:
the installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions
I know this is a simple registry hack and i seen a couple but I have not seen anything specific to hermes.
Please give me a link to directions
Thank You

Here... Install this CAB to the phone

This did not help
I installed the Remove Security Cab and it installed with no problem, but when i try to install: CommButton-Toggle-Vibrate-Fix.CAB
I still get the same notification.
Thanks

Did more searching still cant solve it
I read some more posts and found that making sure processes are not running might solve the problem.
I went to memory and stoped all programs and I sitll can't install the: CommButton-Toggle-Vibrate-Fix.CAB
Are there like system processes which are not showing up in memory - running programs ? Maybe I need to get into those and stop them?
Any other sugestions?
Please point me into the right direction.
Thank You

medmenz said:
I read some more posts and found that making sure processes are not running might solve the problem.
I went to memory and stoped all programs and I sitll can't install the: CommButton-Toggle-Vibrate-Fix.CAB
Are there like system processes which are not showing up in memory - running programs ? Maybe I need to get into those and stop them?
Any other sugestions?
Please point me into the right direction.
Thank You
Click to expand...
Click to collapse
Purely on the point of running processes - these will not show up in programmes in memory (except in very broad terms). An application such as sktools will show running processes.
(I am not saying this will solve your problem though)
Mike

ok i will try getting a prog and stoping more stuff to see if i can install?
Any other sugestions?

Tried using SKtools to stop everyhing possible still cant install the CommButton-Toggle-Vibrate-Fix.CAB
Is there anyone out there that knows how to fix this problem???
Please Help
thanks

Is there a way maybe to instead of installing this cab file to do it manualy??
Can I somehow modify registry to do the same as this cab is doing?
thanks

As a general rule, if I have an "unstoppable" process, I power cycle the phone and then execute the cab without opening ANYTHING else (like the comm manager in this case). Give it a shot.

I just tried that turning it off and on and trying to install, also doing soft reset and trying to install. Nothing works as soon as I click on it in a second i get "Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions."
Please tell me what else I can try??

Finaly got what I wanted
I never got the stupid cab to install, but I found a different cab which let you assign vibrate to anything ( http://www.8525software.com/)utilities so when i hold PTT button it switches to Vibrate
Thanks for all that tried to help me.

Urgent Problem, Blue Angel Freezes

I upgraded my Blueangel to windows mobile 6 a couple of days ago, yesterday i was reset it. when it powered on i have the windows mobile 6 screen and nothings happens thereafter, it is not connection to activesync and i m not able to ROM Upgrade.
Please help me ASAP

read the wiki carefully
try a hard reset after and do the no+yes+yes ritual in the hard reset.. it should worked...
regards
adri

baybe it is because third party software you installed, it happened to me with the touchflo which replaced the touch.dll with another one for another device, also with HTC Plus today plugin

I had it after installing VBAR... you have to reset it and press the record and camera button, then clear the registry HIVE and press the mail button... it will be hard resetted but in wm6 you don't lose any data, just some settings and cabs...

Yeah, I got this problem too a few days ago.. annoying...
When I tried to back up my data using Sunnysoft backup manager, BA had to restart, and then it stuck in the WM6 page... ended up clearing the whole thing again using the no yes yes option...BA was able to start up on safe mode though... weird
I only had this problem once though....
Hmmm, interesting few people have this problems with different circumstances, however leading to the same problem...
is it really WM6 issue or is it 3rd party apps issue?

joseph.sapri said:
is it really WM6 issue or is it 3rd party apps issue?
Click to expand...
Click to collapse
good question!
it just happened to me as well.... i had an almost fresh install of WM2006 (just downgraded, merged Extrom and upgraded again).
I installed some few cabs and eventhough it worked fine for a day, it then started to freeze while booting again and again....
i never had the problem before merging the rom though...

it happened to me also, after doing a soft reset using pbar. it ends up in the green screen with the microsoft logo without going any further. i've tried several soft resets after but it always ends up in that mode.
had to perform a hard reset and install my favorite apps again.

well maybe there are some incompatiblityes with those programs you mentioned, i have not use them my BA has the default apps (the posted cabs) Sprite Backup 6, Htc Home 1.5, Adobe Flash Lite and i have no problems at all

xplode said:
well maybe there are some incompatiblityes with those programs you mentioned, i have not use them my BA has the default apps (the posted cabs) Sprite Backup 6, Htc Home 1.5, Adobe Flash Lite and i have no problems at all
Click to expand...
Click to collapse
have you installed all cabs you posted (cabs & cabs2)?
in what order?
whats Sprite Backup?
and which one is the HTC Home 1.5? (i only see HTC Home6?!?)
sorry, but i am really getting more and more confused...
regards,krz

Sprite backup is the best backup softweare IMO, yes all cabs (cabs and cabs2) Home6 is HTC Home 1.5

thank you very much for your answer, xplode!
there are three HTC HOME6 cabs out there:
1) Helmi HomePlug_Comp.cab: found in Helmi_C's WM2006 archive FLASH.zip
2) Helmi_HtcHome6_WM5_comp_sdkcert.cab: found in Helmi_C's WM2006 archive AddOn.rar
3) HOME6: an archive with two folders (WM5 + WM6) and HTCHome.cab
are there any differences?
is one better than the others?
i never found an answer to these questions...
regards,
krz

KRZTF said:
thank you very much for your answer, xplode!
there are three HTC HOME6 cabs out there:
1) Helmi HomePlug_Comp.cab: found in Helmi_C's WM2006 archive FLASH.zip
2) Helmi_HtcHome6_WM5_comp_sdkcert.cab: found in Helmi_C's WM2006 archive AddOn.rar
3) HOME6: an archive with two folders (WM5 + WM6) and HTCHome.cab
are there any differences?
is one better than the others?
i never found an answer to these questions...
regards,
krz
Click to expand...
Click to collapse
Use Home6 if you want to be able to modify the HTC Home tabs from 6 (default) to less than 6..... this is the only one working....
With Helmi_HTCHome6.. it also works, but cannot modify the tabs......
never tried the other one....

OK OK I had this problem and it solved it without losing data. First i tried to reset the device , like 30 times with no success. Even with a hard reset it didnt work. So you just Put ur device in the booloader mode and then soft reset it and voila. i dont know if it's really the correct solution but it worked for me for 3 times when i had that dumb WM6 screen. It's because of Battery status software ( 100% sure )

BA Freezing
xplode said:
baybe it is because third party software you installed, it happened to me with the touchflo which replaced the touch.dll with another one for another device, also with HTC Plus today plugin
Click to expand...
Click to collapse
Can anyone tell us which third parties programs that cause the freezing or which are compatible whit WM6. To used or avoid them.

Hi,
same problem here. I just installed the cabs from helmi (Thanks again!), the HTC Home (Helmi_HtcHome6_WM5_comp_sdkcert.cab), Acrobat reader and powerpoint (out of this cabs in the first message in the central BA6 Thread) and no additional software. I've re-installed it two times, but that doesn't help .
@ Xeon: Maybe a good work-around, I will give him a try,
UPDATE: @ XEON: Doesn't work for me
regards
Andreas

OK im again facing the same problem it seems my solution didnt work. As far as it seems to, i had to soft/hard reset more than 20 times to solve it. i dont get it. when i reset it the problem is still bla bla bla.. but when u leave it stuck for 10 mins and then reset it , it will work. the point is that after all , u dont need to format/clear registry. All u need is to keep trying. WEIRD [email protected]#[email protected]$#$

I keep having the problem after installing a new cab with a soft reset. The only way to get out of the WM6 screen is to go into bootloader and a soft reset. Just like Xeon said. However, I don't think it is the battery issue because if I just do a normal soft reset, it starts up fine. The problem arrives only when a soft reset is required to finish an installation from cab.

remove program problem from mogul

damn, my mogul got f*cked up after installing touchflo. Not trying to blame this program but maybe there could be some conflict? After i installed it and didnt really like it, i tried goin to remove program in setting to remove this, but guess what, nothing showed up in there. For some odd reason i cant remove any program from my phone because the screen was blank. Then i tried to install another program and said unsuccessful whenever i tried to install anything. Does this happened to anyone else? any solution

I have the same problem on mine. I will let you know if I can figure out a solution.
LD
http://www.andLinux.org

I had a different problem awhile back after installing Total Commander, any new programs that were added didn't show up in the remove programs menu.
What I had to do is use Activesync to remove them, not sure if it will work in your cases though, but hook up with A.S. and on your PC in A.S. open tools/add remove programs and check/highlight what you want removed.
Good Luck

I am having same problem, please someone help.
REMOVE PROGRAM list is empty after ftouchflo installation and touch cube installation.
ACTIVE SYNC not working either.
please help

There was another thread on this(No Items in Remove Programs), but it didnt go anywhere.
This just also happened to me. I also found that I could not install programs and that me phone would not sync... This happened right after installing Slither Cube, and efrost FTouchFlo.. so I went to uninstall and ran into the same thing...Deleted items from the startup folder and still the same thing.. deleted files from the program files section and same, also tried a soft reset 10X....so I had to do a hard reset....

Me too.
I just hard reset. After reading everywhere, this was the only option.

i hope someone knows how to fix this cause i really loved how the latest touch flo cube cab worked on my phone.

saenzjoseph said:
There was another thread on this(No Items in Remove Programs), but it didnt go anywhere.
This just also happened to me. I also found that I could not install programs and that me phone would not sync... This happened right after installing Slither Cube, and efrost FTouchFlo.. so I went to uninstall and ran into the same thing...Deleted items from the startup folder and still the same thing.. deleted files from the program files section and same, also tried a soft reset 10X....so I had to do a hard reset....
Click to expand...
Click to collapse
i think that was mine,lost everything in my storage memory and couldn't sync up to my desktop after installing the touch flo cube cab.ended up hard resetting and starting over,no cube till someone figures out what caused that.

JAMRZ69 said:
i hope someone knows how to fix this cause i really loved how the latest touch flo cube cab worked on my phone.
Click to expand...
Click to collapse
Poorlyduck has a good cube that doesn't cause this issue, its over at PPCGeeks

No need to hard reset
Anyone running into this "Empty Remove Programs" problem in the future, there's no need to hard reset! Check out the simple solution here:
http://www.24hsoftware.com/How-To/this-device-is-restricted-from-downloading-this-file-type.html
found it in this xda thread:
Conclusion: Microsoft Windows Mobile messed up the security settings, so let Microsoft Word Mobile put it back up... problem solved!

Phone problems!!!

Hi everybody,
I have got the LEO last week. I had several problems I could solve, but one big I could not solve yet.
It belongs to the Phone. After making a call, I am not able to make a second one. The application freezes, when I close it, I am not able to open the Phone again. Making a call from the history list is also sometimes something i can not do.
Can please somebody help me? Without the posibility to make easy and quickly calls the LEO is for me useless.
Thank You very much in advance!!!

i have the leo 4 7-8 months.never had problems.tried soft reset?if that wont help i believe that you must go 4 hard reset
maybe some program you put makes that.

If your LEO is giving so much problems within a week, you probably have a mondaymorning model.
Try to exchange it at the shop as it is not funtioning properly. (In EU this is consumer right)
If not possible,
What is it you have done to your phone allready?
You mention having problems and solved them, can you remember what you have done?
Has your phone ever funtioned without problems?
Try to do a complete factory reset or hard reset (look here)
Then format SD (first save data somewhere)
After reset/format does your phone function correctly?
Furthermore:
If you install apps/enhancements/skins, install all apps you need for your phone running on your device.
If you remove SD, your device should be able to startup without any problems, only applications you use besides the normal startup should reside on sd Card.
So for example:
Cookies home tab (becomes part of home screen)=> on device
Igo8 Navigator (Started manually after boot) => on sd card
Task manager (runs allways on background) => device
Games like experiment 13 => on sd card
[....]

if its brand new, get a new one, otherwise
backup
hard reset
if fixed, ok!
if not fixed,
try find an updated stock rom (if you want to stay stock) or get HSPL and flash a cooked rom.
If problem fixed, ok!
if not fixed, hardware problem.

Thank You for the replies. In the morning I tought the problem is fixed, but is not. Can be Cookies home tab a problem?

Stano 74 said:
Thank You for the replies. In the morning I tought the problem is fixed, but is not. Can be Cookies home tab a problem?
Click to expand...
Click to collapse
well it could be cookies but thousands of people use cookies so its unlikely.do you have loads of stuff installed?
also, are you restoring registry settings when you flash? because you shouldn't do that when you go to a new ROM. registry settings backup is only really for restoring to the same rom after hard reseting.

I tried to found an official ROM update for my device. I found one, but the only change is the launching date. On my device is one from 11.1.2010 and I have found one from 4.6.2010. Does it make sense to update?