Given that I believe the hardware as far as the touchscreen itself goes, are there any plans to try and migrate the TouchFlo / TouchFlo II ROM or application layer over so it'll work with the Mogul?
I love the Touch Flo's inteface, but there's no way I would ever give up my full keyboard.
You can find the touchflo application at this post
http://forum.xda-developers.com/showthread.php?t=334965&highlight=pcm+keyboard
Make sure to download a4, this is the most recent release. Also, read the entire first post before installation. I have the HTC 6800 (mogul) from sprint and I successfully installed this software this morning.
I have also installed A4 on my mogul. It is running great! I modified the config file a tiny to give a longer delay and to add SSContact.
Where is my cube?!!!
I can get the touch scrolling to work but still cannot figure out the cube. I can access the audio manager and the home screen (with tabs) but do not see any of the other full screen touch menus or animations.
I have installed the following files:
FTouchFlo_a4.CAB
HomePlugin WM6.cab
HTC_Audio_Manager.cab
HTC_Audio_Manager_Today_Plugin.cab
JT ButtonFlo.cab
Touch Flo (Alpha).cab
Touch Settings v1.22.CAB
I changed the registry key so that audio manager is the music player and also deleted the bio.lnk and mediahub.lnk from the windows/startup. I even went as far as to copy .brn files to make sure they were there. Even Touch settings is working fine.. BUT any time I slide LR or click the button I get the stupid black screen. (WTF, it is killing me!)
Has anyone figured this out on Sprint Mogul???
I didn't try too hard on the cube because I couldn't get the gestures to work. Maybe this is something that will be improved in later versions.
jpshook said:
I can get the touch scrolling to work but still cannot figure out the cube. I can access the audio manager and the home screen (with tabs) but do not see any of the other full screen touch menus or animations.
I have installed the following files:
FTouchFlo_a4.CAB
HomePlugin WM6.cab
HTC_Audio_Manager.cab
HTC_Audio_Manager_Today_Plugin.cab
JT ButtonFlo.cab
Touch Flo (Alpha).cab
Touch Settings v1.22.CAB
I changed the registry key so that audio manager is the music player and also deleted the bio.lnk and mediahub.lnk from the windows/startup. I even went as far as to copy .brn files to make sure they were there. Even Touch settings is working fine.. BUT any time I slide LR or click the button I get the stupid black screen. (WTF, it is killing me!)
Has anyone figured this out on Sprint Mogul???
Click to expand...
Click to collapse
Well this Flash version of the Touchflo 3D Cube it seems to work really well so far on my mogul, like I said it's not the real cube but it's really neat just the same.
http://forum.xda-developers.com/showthread.php?t=328010&highlight=ByKa+Cube+Launcher
Yeah, Byka's Flash version is cool, but it uses lots of system resources and just isn't quite the same.
Someone having the black screen issue has to have found a fix by now?
I've tried the BYKA cube but it jsut looks tacky. It works great but I guess I just have a problem with the icons and the background. Slither is working on a cub which looks exaclty like the TOUCHCUBe but it still has a way, although he's working very diligently. I would love to see the original cube, hopefully some cab extracted in combination with the touchfloa4. That would be ideal.
I tried it yesterday and was not impressed. So I installed SPB Pocketplus V.4 which also has "touch" features and works much better to be honest...
this is from my post in: http://forum.xda-developers.com/showthread.php?t=333513
BEGIN
I got this working on my mogul (close to barebones w/o ext_rom) seemingly perfectly... I did it on a fresh hard hard reset because of some conflicting software and my remove programs list being blank (this is not related to anything with touchflo btw... so don't worry)... I mapped touchflo.exe (on Ftouchflo) to left-right(to make cube both initialize and rotate with my finger dragging left right) and it works like a charm! I also mapped up-down to efrost's minimize program(efrostminimize.exe) that I got from Slither's cube, this brings me back to the Today screen. Not sure what the "ns.exe" is for in your config files but it seems to be working fine for me so far following the instructions. I'm thinking with the mogul black screens there must be a conflicting software involved.
I only have:
HTC plugins + Audio/Comm Manager
Total Commander
TCPMP+FlashVideo
PHM_Reg
Memmaid
Palm Msging
Oxios
Slide 2 Unlock 2 0.53
Ftouchflo alpha 4
Adobe Flashlite 2.1
Edit: Be careful how fast you retry using finger swipes upon the initial initialization (from closed) as it will run two instances if the touchflo did not fully initialize yet. (they both load though... phew* still no black screen)
Edit 2: Remember, if you map left-right and use Slide 2 Unlock 2(S2U2), to exclude s2u2.exe in the Ftouchflo config.
will post if black screen comes up in the future
I w as going to try this after midterms, how is it working? Is it pretty awesome? Is it worth it? does it bogg down your system? Are you afraid of installing other apps for fear of it "blacking out"? I'm very interested in the cube but it seems out of reach right now because of the bugs.
wandrerx said:
this is from my post in: http://forum.xda-developers.com/showthread.php?t=333513
BEGIN
I got this working on my mogul (close to barebones w/o ext_rom) seemingly perfectly... I did it on a fresh hard hard reset because of some conflicting software and my remove programs list being blank (this is not related to anything with touchflo btw... so don't worry)... I mapped touchflo.exe (on Ftouchflo) to left-right(to make cube both initialize and rotate with my finger dragging left right) and it works like a charm! I also mapped up-down to efrost's minimize program(efrostminimize.exe) that I got from Slither's cube, this brings me back to the Today screen. Not sure what the "ns.exe" is for in your config files but it seems to be working fine for me so far following the instructions. I'm thinking with the mogul black screens there must be a conflicting software involved.
I only have:
HTC plugins + Audio/Comm Manager
Total Commander
TCPMP+FlashVideo
PHM_Reg
Memmaid
Palm Msging
Oxios
Slide 2 Unlock 2 0.53
Ftouchflo alpha 4
Adobe Flashlite 2.1
Edit: Be careful how fast you retry using finger swipes upon the initial initialization (from closed) as it will run two instances if the touchflo did not fully initialize yet. (they both load though... phew* still no black screen)
Edit 2: Remember, if you map left-right and use Slide 2 Unlock 2(S2U2), to exclude s2u2.exe in the Ftouchflo config.
will post if black screen comes up in the future
Click to expand...
Click to collapse
it works fine... no real big load on system resources (it was designed for a slower processor actually). No, I'm not really afraid of installing other programs. I was just stating that it's obvious that all those people complaining about black screens have something that conflicts with the cube somehow (or they didn't install according to instructions). Most likely something that runs in the background...
wandrerx, how do you actually get the cube? What application does it get installed with?
Can you send links to the exact apps you are running that are minimum requirements for this to work?
The original detailed instructions (by mikewtw) and files are in: http://forum.xda-developers.com/showthread.php?t=333513
This is really just a summary of instructions and issues since it's getting messy there...
You need all the files from the original instructions:
TouchFlo.zip
AL_xx_Touch.zip
Touch Settings v1.22.CAB
Installation:
Prereq (To be installed first...):
HTC Home Plugin - I used the one from here... http://forum.xda-developers.com/showthread.php?t=319308
HTC Audio Mgr - I got it from the touchflo.zip
HTC Audio Plugin - I got it from the touchflo.zip
Installation Process
1)Install "Touch Flo (Alpha).cab"
2)Install "JT Buttonflo.cab" (This is needed because it causes a script to run at startup which makes it actually work)
3)Install "Touch Settings v1.22.cab"
4)Delete "Mediahubmini.lnk" from "\windows\startup"
5)Unzip all of the files from "AL_xx_Touch.zip" to "\touch" (this step may not be needed but it was mentioned in the original post and I did it anyways)
6)Copy those "AL_xx_Touch.zip" files into "\windows"
7)Now might be a good time for a soft reset
8)Run "Touch Settings" from programs once but do not touch anything just yet... click on save option at the bottom" (this step apparently saves the icons you just installed so they'll appear... I think)
9)Soft reset
Touchflo is now installed you can either:
A) Map it to a button thus making it buttonflo
B) Install Ftouchflo Alpha 4 and use the touch screen to launch and rotate left to right (one way only currently)
If you decide to use Ftouchflo Alpha 4 I've enclosed:
"FTouchfloConfig.txt" - To be copied into "\Program Files\Ftouchflo_a4"...this also makes it compatible with s2u2
"efrostminimize.exe" (by efrost duh!) - To be copied into "\windows"
FTouchflo usage:
Using my config you can bring up the cube by swiping down-to-up (like the real one) or you can do the same going left to right. You can also minimize the cube by swiping up-to-down(via efrostminimize.exe)
Notes:
1)Upon initial run from either being closed or soft reset, try not to swipe it activated too much otherwise it will open twice. Once started swipe all you want. Of course you could just activate touchflo another way first.
2)Installing Touchflo alpha takes away HTC Home contacts
3)This does not seem to be a killable app via "memory"
4)I'm trying to figure out whether I can make some script to make it run smoother
5)Audio Mngr seems to be the only resource killer as it also loads into the cube
5)Yes it only goes one direction, this was a modified touchflo designed to work with buttons. As I said, this is the one we have to use till a cooked rom with the cube comes out.
6)This does not run on initial boot, you've got to either run it from Ftouchflo or "touch flo" in programs
7)If you run "Touch flo" without button mapped or "Ftouchflo"(configured for it) it will stay on the first screen
8)Can also be minimized by using the "red hangup button" (buttonflo-method as opposed to using my config for Ftouchflo)
9)Using HTC Home Plugin Customizer requires a soft-reset because it disables the Home Plugin temporarily
7)Icons not installed correctly is one very big cause of black screen
8)Conflicting programs may also be a reason for black screen as I did this all on a hard reset
Ftouchflo Alpha4
http://forum.xda-developers.com/showthread.php?t=334965
Followed these steps exactly. 3 attempts, 3 blackscreens. 0 fun. Guess we'll just have to wait for a rom...
jbmoneys said:
Followed these steps exactly. 3 attempts, 3 blackscreens. 0 fun. Guess we'll just have to wait for a rom...
Click to expand...
Click to collapse
thats pretty humorous.
Please Help Me Understand!!
Ive installed the touchflo a4, that's the most recent one. but what is touch flo alpha, does it go with the touch flo app I installed? what is the cube, was I suppose to install all three together? right now the app works fine but when im scrolling on the net it accelerates out of control. how do I slow it down? Please respond..
Ncruze said:
Ive installed the touchflo a4, that's the most recent one. but what is touch flo alpha, does it go with the touch flo app I installed? what is the cube, was I suppose to install all three together? right now the app works fine but when im scrolling on the net it accelerates out of control. how do I slow it down? Please respond..
Click to expand...
Click to collapse
dont get the a4 get touchflow v1.3 from the link below.
http://forum.xda-developers.com/showthread.php?t=338143
if you want a cube, I highly recommend slithers cube.
http://forum.xda-developers.com/showthread.php?t=336234
I have been using both of these programs and they work together flawlessly on the Mogul
HTC HOME vs. the Cube
For anyone who has tried both.
I am currently running the HTC Home on mine and it works very well. Power consumption is normal. Good quick response. No complaints overall.
However, I am somewhat intrigued by the Cube and have been contemplating trying it out.
How is the CPU/Power consumption. Responsiveness. Stability? Thanks for your thoughts in advance.
Michael
Stability
I have tried both the Home plugin and the cube. If youuse the home plugin, do a search for the six tab "fixed" kaiser plugin. Fixes some memory leaks and has more functionality. The Cube here is very unstable and not too quick. I had to hard reset to get it to work, and it will not work with some other apps installed. For me, it would not work with SPB Pocket Plus. I would recommend getting the cube Slither has in development. It runs on flash, is quick, and does not seem to have compatibility issues.
Hi,
I've installed Touch Flo 2D Manila2D_1.00_1819.2926-xplode.CAB on top of Sundreams ROM.
This ROM rocks and it very fast on my BA with apps installed. OCed the BA using XCPUScalar.
However I've got a problem with the adding Programs shortcuts in TouchFlo (launcher tab). After selecting the program, the form closes and no program is added to the shortcut. The + remains a +. Anyone experienced this problem?. Is there a way to add the shortcuts manually in a configuration file?.
Also where can I configure TouchFlo settings?
Also the front screen calendar is too basic for my taste. I used SPB diary. How can I use a more advanced calendar with TouchFlo (shows 5 days or more)?.
Thanks to all ROM contributors. Any insights appreciated.
Customize it using this one:
http://forum.xda-developers.com/showthread.php?t=427392
make sure you installed all the Xplode CABS before the manila to have it working
This is from my own experience I am sure some experts can help more.
Update
Thanks for the reply.
I have installed the following cabs:
HTCAlbum-2.5QVGA.cab
Aku1.4 Sounds.cab
Aku1.4 welcomehead.cab
HTC htcStartMenu.cab
HTC Enchansements.cab
HTC TaskManager 2.1.34837.5
HTCFlashLite.cab
HTC AudioManager.cab
Touch Flo 2D Manila2D_1.00_1819.2926-xplode.CAB
To which cabs are you actually refering to?. Am I missing something?.
Well as regards to the launcher, I have added the applications manually via registry
HKEY_LOCAL_MACHINE\Software\HTC\Manila2D\Launcher, however the application do not run when clicked on. Icons appear as a 'blank icon' rather than '+'
http://forum.ppcgeeks.com/showthread.php?t=46966
Any ideas?
As far as the calendar, no one seems to have been able to use a different calendar as of yet. Having said that, there is one alternative that I am using right now (with which I am pretty happy). There is a program in the Dev and Hacking section that is called Manila Control
http://forum.xda-developers.com/showthread.php?t=447504&highlight=manila+control
This will allow you to switch back and forth between Manila and Today (just set up an Up-Down gesture with FTouchFlo Config). You can then put any Today plugin that you want (ie SPB Calendar) and just switch to it when you need to see your calendar. Hope this helps you on that end.
Now, as far as the cabs, you should install the following cabs:
HTC_Enchansements.cab
HTC AudioManager_2.0_1819.1228.cab
GoogleMaps_compressed.cab
HTC_Task_Manager_2.1_34837.5.cab
HTC_Album2.0_1818.3032.cab
Touch Flo 2D Manila2D_1.00_1819.2926-xplode.CAB
FSP, DShow, WMP, Youtube, Video Fixes.cab
These are the ones that I have on my device and I have not had any issues with speed or anything like that. Hope this helps!
Thanks for feedback. I have managed to find a workaround via registry. I did'nt add the "uptime" key before. Once added the icons are functional and show up.
Hi everyone.
I just got my HTC Touch-Dual phone and got very disapointed with the default contacts software, so I searched the forums for a 3rd party app and found iContact and PocketCM as the best ones for my needs.
Anyways, they both install fine but when I bring up the TouchFlo interface and press the "Contacts" button at the "Contacts Cube Face", the iContacts/PocketCM comes up; but afterwards I can no longer activate de TouchFlo interface. Sliding my finger up freezes the screeen at the today screen and I have to reset to make TouchFlo work again.
I tried updating to Framework 3.3, but that didn´t work.
How can I fix this?
Thanks.
im using tfdetacher 6.5 and the right softkey on the wm6.5 today screen says touchflo but when i goto touchflo, how do i set the right softkey to take me back to the 6.5 today screen?
In the tfdetacher config program. I believe it is in your start/programs by default.
its in my programs start menu but i click on it and it just takes me back to touchflo today screen, i wanna get my wm6.5 today screen
Try looking under settings, or a folder called system tools, or something like that. There should be a program called TFD Config somewhere in your Startmenu. You did install TFD and having it currently running right?
yes its installed and running but its real slow on switching over and sometimes the soft keys will start flashing and also i want to be able to use weatherpanel 2009 but cant seem to figure all this out. srry, im such a noob..lol
Dunno what to say man. It works flawlessly on my Vogue. Maybe you have too many programs running and are low on RAM. Sorry I don't have any other tips.
ok, what version of touchflo detatcher do you use on your vogue and also, could you post your screenshots of all the settings that i need to do to make it work and to make weatherpanel 2009 be incorarated in that as well. i do have 2nd today installed just havnt set it up yet
ok, i've set the softkeys correctly in tfconfig and they still dont respond. is there something i need to do to the registry to get tfdetacher to work right on my vogue using NFSFAN'S V12 6.5 ROM
ok, i fixed my issue except im not using tfdetacher, instead i downloaded and installed Manila Control v1.0, went to config and selected manila 2d which fixed the right softkey on my touchflo today screen but not on the 6.5 side so i then got into my registry and changed these variables:
1. goto HKLM\Software\Microsoft\CHome\CClock
2.change SK2TEXT from "Set" to "TF2D." (no quote)
3.change SK2URL from ":MSCLOCK;AppRunToHandleNotification" to ":M2D_Ctrl" (no quote)
4. do a soft reset and everything works great
now all i need to do is figure out how to incorporate Weatherpanel 2009 in this equation, any suggestions would be appreciated.
Hi
I have O2 ATOM PURE win 6.5
I want to install Manila 2D
I tried
http://forum.xda-developers.com/showthread.php?t=541750
i installed the cabs but manila is not working
just there is "tap here to launch touch flo"
after i tap :::> "launching touch flo" then nothing happen & then "tap here to launch touch flo" appears back
any help ?
Use the old manilla version cab. Important is, to install both HTC Settings and HTC Settings Improovement cabs. As I got it running on my comet (atom life) with original WM6.1, it should be possible.
I'll try to make a cab the other day, but it will take some time, as I'm really busy although I have got some days off now.