Smart Dialing option is not wrking properly in my HTC touch.
When i dial a new number which resembles the one already dialed one, the smart dialing option itself picks up the number already dialed rather than dialing the new one...
pls suggest...
Same here
I'm having the same problem. Perhaps it is a Windows Mobile overall error? Anyone?
Related
When my XDAII receive a call it does recognize the number but strangely it does only link the number (any number) to only one contact in my list.
I tryed to delete this contact to see what happens but it link witha nother but use it along for all calls.
Can you help me?
Thanks
Felipe
Can you dial a number by tapping it from your contacts list?
In some cases yes in others no, this is because in some numbers there is the area code that the XDAII does not recognize because we use 011 here in my country. If I clear that the number can be dialed from the contact list.
So, are you saying that when you receive a call from a phone number which is properly formatted (for your phone to dial it) in your contacts list, it still won't ID the correct number? Remember, it is a simple pattern matching algorithm - it gets a call, looks in your contacts list for a number formatted EXACTLY as it receives it, and displays that contact.
I followed this logic but it wont work to explain what is happening
Hi,
Has anybody had problems with special phone numbers like "99" (two digit phone number)
At my office were are using "office GSM" and to dail our reception we dail 99
But HTC windows mobile 5 does not work, the phone displays a dialog "UNKNOWN APPLICATION"
Have anyone seen this?
Or, maybe someone has seen it and found a solution?
Anyone?
Can I maybe change the dailer application?
If yes, where can I buy/download such one?
Can I use the one from WM6, roumor says that WM6 works
Maybe its conflicting with your speeddial as that allows up to 99 quick dial numbers.
Try saving a new contact called reception and with a phone number of 99 then add it under speeddial as entry number 99. Then when you dial 99, it will actually dial 99.
I tried that, but the same "error" still pops up.
Strange is however that if you dail any number between 1-29 it tries to dail.
but 30 or higher (<100) does not work and gives the error "unkonwn application"
I called HTC europe support and they could also see this. One funny thing was that the support guy tried the same on a WM6 rom cooked TyTN device and here it worked , but as he said -"if you do this, your warranty goes away.."
Hi All,
Great site!!
I have 2 questions:
1 - When I use smart dialing from my hermes I use the direction arrows once I have found the contact and choose the work number of a contact that has an extension as +1 (999) 999-9999 x 9999 I then get a dialog saying "Invalid entry, please try again."
This same entry dials fine from speed dial or dialing from contacts, any suggestions, it's a real pain to manually dial the whole number.
2 - I have my numbers in outlook 2003 and they are formatted with the +country code format, so all numbers have a + in front of them.
When I smart dial, I can't see the last number of the phone number it only shows
+1 (xxx) xxx-xxx
Again it's really annoying as the only way I can find the number is by dialing and I usually use the smart dial to find a phone number when I am looking for someone's phone number.
BTW I have tried to edit the number and remove the + but outlook put's it back. This is actually good when travelling.
Thanks in advance,
I apologise in advance if this information is somewhere on the site, I am not lazy and I did read quite a bit before posting.
ROM version: 2.15.502.3
WM5
on my outlook, I have the phone num , ext and the phone will dial and wait for pickup before dialing the ext.
of course, i am not using the country code feature, so...
I would be happy with that behavior.
If I could change the font to be smaller in the phone application at least I could see the whole number.
Thanks for sharing.
is there a way to show the number you are dialing if it is a contact. My display does not until i completely dial and then show the number and area code.
Thanks
if your using the HTC dialer it does. i don't know about winmo dialer tho. i'm guessing it does not, and that is what your using.
Hello,
I often use an access code to dial internationally, and once I am connected to that access number, I have to enter the number of the person I am calling.
I have an HTC Touch HD with WM6.1pro and cannot find a way to do it. If I connect to the access number, then at the prompt go to my address book and dial a second number, it assumes I want to have two separate calls and puts the access code on Hold... which is not what I want! I do not remember all my friend's numbers, so I do have to use the address book.
With my old nokia n95, once connected I could go to the menu and say I want to dial a DTMF which is the tone you hear when dialing a normal phone. This allows me to follow on with calling the number I need while connected to the call.
Is there a way of doing this on WM6?
I have a kind of work around. I edit my international friends phone numbers as a "car phone" and the numbers look like this
02081802828 p 0027115555555
the access code, then I add p to pause then their number.
The HUGE problem is that when I dial any of my international contacts, the phone displays the same person... so no matter who I call internationally, it always shows a photo of my friend Ian, and displays his name instead of the person I am actually speaking to. I think this is a bug where WM6.1 only looks at the first 11 characters of a number, but the problem is, all my intl numbers have the same first 11 numbers.
Help MUCH appreciated, thanks,
Mark.
livegod said:
Hello,
I often use an access code to dial internationally, and once I am connected to that access number, I have to enter the number of the person I am calling.
I have an HTC Touch HD with WM6.1pro and cannot find a way to do it. If I connect to the access number, then at the prompt go to my address book and dial a second number, it assumes I want to have two separate calls and puts the access code on Hold... which is not what I want! I do not remember all my friend's numbers, so I do have to use the address book.
With my old nokia n95, once connected I could go to the menu and say I want to dial a DTMF which is the tone you hear when dialing a normal phone. This allows me to follow on with calling the number I need while connected to the call.
Is there a way of doing this on WM6?
I have a kind of work around. I edit my international friends phone numbers as a "car phone" and the numbers look like this
02081802828 p 0027115555555
the access code, then I add p to pause then their number.
The HUGE problem is that when I dial any of my international contacts, the phone displays the same person... so no matter who I call internationally, it always shows a photo of my friend Ian, and displays his name instead of the person I am actually speaking to. I think this is a bug where WM6.1 only looks at the first 11 characters of a number, but the problem is, all my intl numbers have the same first 11 numbers.
Help MUCH appreciated, thanks,
Mark.
Click to expand...
Click to collapse
Don't know if it will work... but you coud try (using Advanced Config) to increase the number of digits used to "match" the numbers in the contacts... for example to 18 or 19 numbers... but I cannot immagine what other "consequencies"could happen...
Let us know !
Regards,
K
Hi Kostas
It seems that the problem is actually with spb Mobile Shell and not windows mobile.
When I dial using the windows mobile dialler, it gets the name and picture right, but when I use spb's dialler it shows the wrong person and name...
I will chase it up with them... and thanks for the good idea, unfortunately the Call ID Match does not help the problem.
Efgaristo!
Mark.