Related
Hi, can't find it in search but is there any way to hack the font size in windows mobile 6? I use reading glasses and don't want to use them to use the phone! Or is there any application that would do that? Any help appreciated.
/menu start/settings/system/screen last tab? (and softreset).
Brommersr said:
Hi, can't find it in search but is there any way to hack the font size in windows mobile 6? I use reading glasses and don't want to use them to use the phone! Or is there any application that would do that? Any help appreciated.
Click to expand...
Click to collapse
There are a few settings I have played with in the past for the same reasons.
HKLM\System\GWE\MENU
1) popfnt
2) barfnt
adjust the Ht value in decimals
But you will have to adjust them to your liking, try 950 to start.
I know that there are others I just can't think of them at this time.
Thanks for response, will try them out.
theloon said:
There are a few settings I have played with in the past for the same reasons.
HKLM\System\GWE\MENU
1) popfnt
2) barfnt
adjust the Ht value in decimals
But you will have to adjust them to your liking, try 950 to start.
I know that there are others I just can't think of them at this time.
Click to expand...
Click to collapse
yeah, but in some cases it may destroy softwares GUI..
sktools have nice fontsize change options.
nothin said:
/menu start/settings/system/screen last tab? (and softreset).
Click to expand...
Click to collapse
Thanks for that - I also only just noticed the Clear Type - much nicer.
While we're on the subject, any way of changing the font colour ??
nothin said:
yeah, but in some cases it may destroy softwares GUI..
sktools have nice fontsize change options.
Click to expand...
Click to collapse
That's why I made the statment.
"But you will have to adjust them to your liking, try 950 to start"
Hi,
I flashed my ROM to an english ROM with regional settings on English (United States). Is there a way to prevent Windows mobile from interpreting incoming phone calls as US phone numbers ?
I mean in France we have 10 digits numbers which we usually display by pairs of digits, i.e. 01 23 45 67 89. However when someone calls me, WM shows (012) 345-6789, which is annoying. Can I disable that formatting and just make it display 0123456789 ?
I didn't put France as a regional parameter because then the days are displayed in French (lundi, mardi, ...) while the rest of the OS is in English (how f'ing stupid is that ??).
Thanks for any help !
Anyone ?
What if you enter the numbers as +33xxxxxxx (+33 for France, of course) or something along those lines. Does that work? Having the "+" sign, might do the job.
In the regional settings you can adjust the format for each single element. So set it to "French" and then change the date format to your needs.
johnpatcher said:
In the regional settings you can adjust the format for each single element. So set it to "French" and then change the date format to your needs.
Click to expand...
Click to collapse
Does that affect the way phone numbers are displayed? I didn't think so, but maybe it does.
Chris Cross said:
Does that affect the way phone numbers are displayed? I didn't think so, but maybe it does.
Click to expand...
Click to collapse
To be honest, I don't know I'm still waiting on my Touch HD, which is my first PocketPC with Windows Mobile Phone Edition, whereas my x51v just is a "normal" pocket pc.
johnpatcher said:
To be honest, I don't know I'm still waiting on my Touch HD, which is my first PocketPC with Windows Mobile Phone Edition, whereas my x51v just is a "normal" pocket pc.
Click to expand...
Click to collapse
I just looked at my Touch HD and I don't see that it would change the phone number display. I only see that you can change how other numbers, and decimals, and currencies are displayed.
Anyway, let's hope your HD gets there soon.
I always enter the phone numbers in the international form (+<country code><phone number>. For france it's +33 followed by the 9 digits of the phone number). That way, I don't care from where neither to where I'm calling, it always works fine.
ZoZo2 said:
Hi,
I flashed my ROM to an english ROM with regional settings on English (United States). Is there a way to prevent Windows mobile from interpreting incoming phone calls as US phone numbers ?
...
Thanks for any help !
Click to expand...
Click to collapse
This has always been a pain with WinMo, and I haven't seen any definitive answer yet. There is a lot of discussion about the problem on these forums and in other WinMo forums as well. Used to come up regularly in the Hermes forums and I think I posted the same question a year or more ago.
I think Google is your friend here, but it will probably take a lot of searching.
In the meantime, roll on WM7. (Lots of wishful thinking...)
hi, Friend "ZoZo2",
Change your regional settings From US to UK. I think your problem will be solved.
Hello fellow Diamond 2 lovers!
Is there a way of showing currency values in the stock tap? It would be interresting to see the graphic development of the Euro, US $ and Yen in comparison to each other.
Thanks for your time, and take care!
Studebaker
I would like to know aswell
Hi,
Here you are:
EURUSD=X
USDEUR=X
EURJPY=X
JPYUSD=X
etc....
vax6 said:
Hi,
Here you are:
EURUSD=X
USDEUR=X
EURJPY=X
JPYUSD=X
etc....
Click to expand...
Click to collapse
Thats great! Thanks!
How can I set so that changes in stocks are shown always in percent (%)? As it is now I have to click the red or green box to make it show the chhange in percent. I want it to always show in percent.
Laban said:
Thats great! Thanks!
How can I set so that changes in stocks are shown always in percent (%)? As it is now I have to click the red or green box to make it show the chhange in percent. I want it to always show in percent.
Click to expand...
Click to collapse
I don't know but unfortunately that part is not working. (always will be 0% or 0.00) Maybe cause it does not know what was the high and low amount. If you go into the "Stock Details" you will see the graph about the changes.
vax6 said:
I don't know but unfortunately that part is not working. (always will be 0% or 0.00) Maybe cause it does not know what was the high and low amount. If you go into the "Stock Details" you will see the graph about the changes.
Click to expand...
Click to collapse
You mean for the currency exchange rates?
For example Dow Jones shows correctly in percent (right now down 1.90%) but I always have to click the red or green box to see the actual change in percent.
Laban said:
You mean for the currency exchange rates?
For example Dow Jones shows correctly in percent (right now down 1.90%) but I always have to click the red or green box to see the actual change in percent.
Click to expand...
Click to collapse
Yes, I thought for that.
Hello vax6! Thank you so much Dude, how in heaven did you find that one out? You rock!!!
Have a great day, and take care!
Studebaker
Can I get the copper price from LME via Stock tab here on my diamond?
I dont know, if there is a symbol for copper, but
XAUUSD=X (Gold)
XAGUSD=X (Silver)
XPDUSD=X (Palladium)
works
vax6 said:
hi,
here you are:
eurusd=x
usdeur=x
eurjpy=x
jpyusd=x
etc....
Click to expand...
Click to collapse
you are the man!!
Very helpful thread, thanks!
Cool stuff. Anyone know the code for crude oil prices?
Cheers for the info, though does anyone else's currencies not show the numerical or percentage change?
Hi there,
Does anyone know how to change currency from EUR-$ to $-EUR?
Would like to have all currencies displayed in euro instead of dollar.
eRJe said:
Hi there,
Does anyone know how to change currency from EUR-$ to $-EUR?
Would like to have all currencies displayed in euro instead of dollar.
Click to expand...
Click to collapse
As mentioned by vax6,
USDEUR=X (this is $ to Eur)
EURUSD=X (this is Eur to $)
currencies will never show the change in % or in absolute value;
they are not exchanged in a defined market with open/close/high/low prices or opening hours (Fx is always active, worldwide, between counterparties).
So, a real "reference" price (to be compared with the "X" price) does not exist.
this is the reason why the right box is always green with "zero" value.
Great feature! Also works for Swiss currency
EURCHF=x
cauterio said:
currencies will never show the change in % or in absolute value;
they are not exchanged in a defined market with open/close/high/low prices or opening hours (Fx is always active, worldwide, between counterparties).
So, a real "reference" price (to be compared with the "X" price) does not exist.
this is the reason why the right box is always green with "zero" value.
Click to expand...
Click to collapse
Thanks for the explanation, though with that in mind, perhaps the feature should take the change as being from one update to the next.
samluke said:
Thanks for the explanation, though with that in mind, perhaps the feature should take the change as being from one update to the next.
Click to expand...
Click to collapse
you're welcome..
your idea is nice, it would need a development (as the data to fill the box is not available on yahoo finance, application should understand this, and calculate itself using the previous data)...
Hello all,
The clock on my HD2, which replaces the battery icon when using an application was originally digital, i dont know what i have done (if anything) which has turned it to analog.
It is very difficult due to the size to read this analog version, can anyone on here tell me a way to change this back to digital?
At one time if you hold down the clock up top on the today screen you could choose digital or analogue, maybe you still can and you changed it by accident. I have a task manager getting in my way to test it at the moment.
not working
Hi mate thanks fir the advice but its not letting me do anything like that.
I have tried looking at all the settings to do with time but still haven't been able to find anything, not sure how it could have happened in the first place.
I take it by the lack of interest no one else is having this problem.
Dharms said:
Hi mate thanks fir the advice but its not letting me do anything like that.
I have tried looking at all the settings to do with time but still haven't been able to find anything, not sure how it could have happened in the first place.
I take it by the lack of interest no one else is having this problem.
Click to expand...
Click to collapse
U can change your clock back to digital from the following registry key:
HKCU\Software\Microsoft\Shell\AnalogClock
Change the value from 1 to 0... That should solve your issue.
Hey thanks for that i will give it a try, don't really have any registry editors so will have to get one.
Any ideas on how or why this has happened?
Hey, just gave it a try and it works a charm, needs a reset after changing the code but apart from that thats it.
Thanks alot for the help.
Dharms said:
Hey, just gave it a try and it works a charm, needs a reset after changing the code but apart from that thats it.
Thanks alot for the help.
Click to expand...
Click to collapse
Welcome....
Does anybody have this watch?
If yes - What do you think??
I just got one in. It took me two hours to find the language settings to change the text from Chinese to English. I can't get it to work with my Nexus 6 because app manager for this watch for some odd reason won't connect via Bluetooth. Besides that.... It looks nice...lol. I did however open up my developers options. I would like to root it and drop a nice local ROM in it.
willonuts said:
I just got one in. It took me two hours to find the language settings to change the text from Chinese to English. I can't get it to work with my Nexus 6 because app manager for this watch for some odd reason won't connect via Bluetooth. Besides that.... It looks nice...lol. I did however open up my developers options. I would like to root it and drop a nice local ROM in it.
Click to expand...
Click to collapse
You are lacky. I cant change language to English from Chinese. Can you make me some advice how to do it ?
Jan
JanWol said:
You are lacky. I cant change language to English from Chinese. Can you make me some advice how to do it ?
Jan
Click to expand...
Click to collapse
Yes. Pm me and I will let you know all that I have figured out..
Could somebody scan and post the QR code for the WatchManager app?
About the language thing, it changes to what your phone is set to AFTER it pairs and connects with the WatchManager app. Prior to that, there is no way to change the language.
Language change
You can change the language prior to binding the watch and phone by double tapping the wacht face and scrolling to the settings icon tap it and the globe is the language area. The watch does not have to be binded.
Hi man,
I have W3 -> xburst ecc
but wont pair:
https://www.youtube.com/watch?v=bUQz4XCSqY4
were is your app to manager?
willonuts said:
I just got one in. It took me two hours to find the language settings to change the text from Chinese to English. I can't get it to work with my Nexus 6 because app manager for this watch for some odd reason won't connect via Bluetooth. Besides that.... It looks nice...lol. I did however open up my developers options. I would like to root it and drop a nice local ROM in it.
Click to expand...
Click to collapse
hiii
please help me )
i need to know the exact name of the watch manager app
also, how could you set the calendar and time as my watch only sees an obselete date and wrong time
thanks sooo much in advance