my phone has started to play up - if the screen dims (before it completely goes dark) if i touch the screen to "wake it up" it stays in its dim state and doesnt matter what i press it stays like this, only way is to press the power button to completely darken it and then press again to wake it up to full brightness.
And the programmes are ticked to close when the "x" is pressed as opposed to run in the background, but they dont close, they are still running.
i have checked and uncheked the feature in tweak, and soft resetted, but both problems remain, is there a fix? or a hard reset? im thinking of installing a new rom anyway
Related
Anyone else find that some software can cause the screen brightness to slide down to zero, so you have to go through settings and slide it back up via several irritating clicks. Not sure what software is doing it
Regards,
Mike
yup
use to happen onxda1, happens only sometimes on xda 2
yup
use to happen onxda1, happens only sometimes on xda 2
Yup it happens sometimes. I think I figured out when that happens.
It happens when you press the Power Button not all the way e.g. when you apply only minor pressure to the button. Normally this happens accidentally when you want to Power Off the XDA. SO instead switching off the the XDA, if you do that (i.e. press power button not all the way), the brightness will go all down to zero.
I think the "half press" of the power button to dim the display is an intended feature not a bug. Was the same on my iPAQ before moving to the XDA II.
I have had ythe odd occassion (twice only) where after a soft reset the screen brightness was set to zero. You have to go to the screen settings and slide up to your desired setting again.
Ed
hello,
My S100 can not shut down when i press the power button during 2 seconds. (Note: Turning your device off doesn’t turn the phone off. To turn the phone off, press and hold for two seconds.)
It looks off, but it's not, the phone is still on !
I heard i can use the "inflight mode", but i'd like to know the correct manip' to turn off the device AND the phone !
Any idea ? :roll:
ROM : 1.03.02 FRE
Date : 11/02/04
the only correct way to turn the phone off is to use the flight mode.
if you pressed the power botton for 2 sec you will turn the screen light off.
regards.
Pressing the power button does not turn the phone off, that is an error in the manual as far as I know.
Only Flight mode turns off the phone function, when you press the power buton shortly the S100 powers down ( goes into sleep mode), when you press the power button longer the backlight goes off. If you look close, you see the screen is still on then and when you tap it, the programs you tap will respond. When you turn the S100 to sleep mode, the screen switches completely off and does not respond to anything.
You cannot turn the S100 completely off, since no power means no RAM, means a hard reset, means all data you installed gone. In sleep mode, the S100 uses very little power to retain the data and is still able to run alarms, notifications etc.
If you want an easier way to switch your phone to flight mode than tapping the signal symbol in the top and then tapping in the pop-up ,and create alternative modes ( like meeting, loud, soft, quiet, etc), I recommend PocketZenPhone, where you can easily create your own phone modes with buttons on your today screen. The app is very cheap ( 5 euro's) and the links can be found on this forum.
thanx a lot for you're answers ! That helps !
If I am correct, if I need to reboote the device and the phone (for instance, after i installed the "contacts short cut programm designed by Mamaich), the only solution I have is to remove the battery ??? :roll:
I tried to put the phone in flight mode and shut down the device but it didn't work....
I think you need to read your manual better!
Rebooting the device can be done by a soft reset. You just put your stylus point into the little hole in the bottom of the S100, right of the headset hole, and press. It then restarts completely and loads your programs again etc.
Removing the battery also soft resets, BUT: If you leave it out too long, the back up batery runs out and you do a hard reset, thereby removing all data on your device you installed! It will leave you with an S100 as it came from the factory, but all your own data is completely gone (programs, contacts etc)! A Hard reset can also be done by pressing and holding the power button while at the same time doing a soft reset as described above, by putting your stylis in the little hole.
With some programs, like SPB PocketPlus you can select a small reset button to be present on your today screen, so you don't have to push your stylus in the little hole everytime you want to soft reset.
I hope this helps.
Even when I untick 'On Battery power Turn off baclight if device is not used for ... Time', my Jasjar baclight goes off in 2 minutes. And, if I set this to 5 minutes still my Jasjar backlight goes off in 2 minutes. Also, when I choose to 'turn on backlight when a button is pressed or the screen is tapped, it doesnot turn on any button or screen tap. I can turn it on by power button or Call reject red button. Any registry hacks/ Am I missing something? I would like my backlight always on untill I press power button. Also is there any hack to turn on power/ backlight automatically when I open the lid?
manu407 said:
Even when I untick 'On Battery power Turn off baclight if device is not used for ... Time', my Jasjar baclight goes off in 2 minutes. And, if I set this to 5 minutes still my Jasjar backlight goes off in 2 minutes. Also, when I choose to 'turn on backlight when a button is pressed or the screen is tapped, it doesnot turn on any button or screen tap. I can turn it on by power button or Call reject red button. Any registry hacks/ Am I missing something? I would like my backlight always on untill I press power button. Also is there any hack to turn on power/ backlight automatically when I open the lid?
Click to expand...
Click to collapse
Maybe a soft reset (fixes lots of weird problems like this). Cheers,
yeah and if soft reset doesnt help, do backup, sync with PC and do hard reset.
Hi,
I've read on here that you can do a soft reset without taking cover off and pressing the actual reset button, but I can't find it again. I've looked on hints and tips, wiki, and searched. Can anyone help please?
Cheers
You'll be needing the TouchX Reset & Wifi shortcuts then
You can get them off this post...
http://forum.xda-developers.com/showpost.php?p=4947950&postcount=1
It creates 2 shortcuts in your start menu. 1 for resetting, and 1 for toggling wifi. You can then add to your quicklinks, if you so wish.
Hope this helps
You could always switch off + switch on but johncmolyneux suggested works as well, although I used a cab so as when I push the switch off button, I get a new menu with various options, including soft reset.
Forgot which one it is though
Snerkler,
Some good suggestions here. Be aware that these will only work if the device is NOT in the grip of death, as I call it.
If it has died then there's no option but to take the back off and either press the little red button or take the battery out.
WB
The 'out of the box' method, without resorting to additional applications is to press and hold the Power key for 3 seconds.
This opens up a context menu which includes 'Power Off'. This is a full 'power off' state with all background processes stopped. Pressing the power button again restarts the phone as in a soft reset.
NeilM said:
The 'out of the box' method, without resorting to additional applications is to press and hold the Power key for 3 seconds.
This opens up a context menu which includes 'Power Off'. This is a full 'power off' state with all background processes stopped. Pressing the power button again restarts the phone as in a soft reset.
Click to expand...
Click to collapse
So turning the phone off and on again is a soft reset???? If that's the case why are there cabs for soft reset, seems a bit strange to me. Wish I'd known that before when installing some of the cabs and taking the back cover off to press the reset button
wacky.banana said:
Snerkler,
Some good suggestions here. Be aware that these will only work if the device is NOT in the grip of death, as I call it.
If it has died then there's no option but to take the back off and either press the little red button or take the battery out.
WB
Click to expand...
Click to collapse
I know what you mean about the "grip of death" lol. Been there already.
Turning the phone fully off then on again is the same as a soft reset. A simple on/off isn't.
If the device goes through the splash screens on restarting (as after the power button 'hold' switch off) that is a soft reset.
I use a stand alone program called psShutXP which is available on This Page - download the VGA version. It runs as a small Screen Off/Suspend/Power Off utility.
NeilM said:
Turning the phone fully off then on again is the same as a soft reset. A simple on/off isn't.
If the device goes through the splash screens on restarting (as after the power button 'hold' switch off) that is a soft reset.
I use a stand alone program called psShutXP which is available on This Page - download the VGA version. It runs as a small Screen Off/Suspend/Power Off utility.
Click to expand...
Click to collapse
I'm not sure what you mean by fully off, and simple on/off. Are you referring to power off, and sleep? In which case I was referring to power off, ie hold power button and then select power off
NeilM said:
Turning the phone fully off then on again is the same as a soft reset. A simple on/off isn't.
Click to expand...
Click to collapse
Sorry - could you explain that please? Is there a difference between turning the phone off, and "fully" off?? I assume you're not refering to simply switching off the display when you say a "simple on/off", as that's not off at all.
You've lost me there mate.
There are 3 or 4 suspend states- sorry, but I can't remember what all 4 are
There is 'screen off' which simply turns off the screen but keeps all currently active programs running. This is only available by using a 'Display Off' or 'Screen Off' switch such as the 'Toggle Screen' option in Media Player. WFi and GPS remain active in this state.
The next is 'Suspend' by pressing the power button. This turns off the screen and some functions such as WiFi and GPS and some media players also stop working but the phone remains responsive and timed notifications will still work.
Next is the 'full power off' I mentioned which you get by pressing and holding the power button. This turns off all functions, phone features and stops all notifications working.
That's what I was clumsily trying to say when I mentioned that a 'full power off' has the same effect as a soft reset- as opposed to a 'screen off' or 'suspend'.
[Edit: Having tried this a little more, it may be that the HD2 doesn't differentiate between states 1 and 2 ?. Due to the lack of hardware button configuration, Media Player's Screen Toggle can't be assigned to a button. psShutXP's Display Off button works, but on turning on again, the lock screen starts, which shouldn't happed with a simple display switch. ]
NeilM said:
There are 3 or 4 suspend states- sorry, but I can't remember what all 4 are
There is 'screen off' which simply turns off the screen but keeps all currently active programs running. This is only available by using a 'Display Off' or 'Screen Off' switch such as the 'Toggle Screen' option in Media Player. WFi and GPS remain active in this state.
The next is 'Suspend' by pressing the power button. This turns off the screen and some functions such as WiFi and GPS and some media players also stop working but the phone remains responsive and timed notifications will still work.
Next is the 'full power off' I mentioned which you get by pressing and holding the power button. This turns off all functions, phone features and stops all notifications working.
That's what I was clumsily trying to say when I mentioned that a 'full power off' has the same effect as a soft reset- as opposed to a 'screen off' or 'suspend'.
[Edit: Having tried this a little more, it may be that the HD2 doesn't differentiate between states 1 and 2 ?. Due to the lack of hardware button configuration, Media Player's Screen Toggle can't be assigned to a button. psShutXP's Display Off button works, but on turning on again, the lock screen starts, which shouldn't happed with a simple display switch. ]
Click to expand...
Click to collapse
OK, thanks for the explanation
Occasionally I get a problem where pressing the power button does not wake my phone up from standby, the lights behind the buttons flash and then turn off but the screen turns off. This normally fixes itself fairly quickly but it's still a pain in the mean time
I'm getting the same thing and it started today. Pressing the power button doesn't turn on the screen but the keypad lights comes on and after 10 sec it goes away and the screen remains black. Pressing and holding down the power button for 3 sec brings up the lock screen and all is back to normal....that is until the screen goes black again!
Anyone having the same problem?
This is happening after i installed chainfire's new 2.0 3d patch. I'm going to uninstall it and see if it persist.
I'm on stock TmoUS HD2.
I had this issue before. Check whether the below setting is enabled.
Start > Settings > Menu > All Settings > Today > Items
The setting "Today timeout", at the bottom left hand corner,
should not be selected/enabled.