Hi guys,
I flashed the rom on my phone and i have lost the 850mhz 3g band. It has been repalced with the 900mhz. Is thier a way i can make my phone connect to the 850mhz band?
did you flashed an original HTC ROM? if so, i suggest you to conact HTC
Related
Hey guys my ex-Orange is on Virgin AU these days, using it as a tethered modem but I need to lock down to 900 as the Opyus/Virgin 2100mhz 3G spectrum is saturated in Melbourne to hell with all these 2100mhz devices over the last few years, any idea where I can get an application to lock to 900mhz 3G ?
Im using the HK rom a kind XDA'er uloaded for us
Under "Start\Settings\Personal\Phone\Band" (translated from German) you can preselect some frequencies.
thats the problem ! the only option is 2100/900 mhz together, nothing else under 3G
try....
On my rom I have two things to change on that page:
Networktyp: There I'm able to decide GSM or WCDMA
GSM should help you with your problem.
Band: There I can select the frequencies, but as you mention, there are always a UMTS band included.
Good luck and regards from AUSTRIA.
Stefan
Hello
Is possible to enable to band HSPA to 850 MHz?
my operator works with 850 MHz
My Wildfire is 900MHz
Looking in the internet I see that HTC Wildfire for Australia have this specification(850/2100)MHz
http://www.htc.com/au/product/wildfire/specification.html
Is possible get the rom or Radio patch of these Phones (Australia) and enable this feature, if the answer is yes, where can i get this rom? or exists other way to enable this feature
Dmonium
Excuse me if my english is so bad
No. The phones either support 900 or 850 Mhz (amongst other frequencies).
If you have a 900 Mhz phone ti will not work on 850Mhz no matter what software you use.
Likewise, my 850Mhz Wildfire will not work on 900Mhz networks
In WildPuzzle rom
Add to Home screen/Shortcuts/Activities/Settings/com.android.settings.BandMode
After start you can Set GSM/UMTS band
Automatic/Euro/USA/Japan/AUS/AUS2
Hi I have a HTC Surround Unlocked (by Imei) but I cant get 3G (UMTS850 Mhz) by carrier is Tigo Honduras have 3G 850Mhz but the phone only get gsm 850MHz, any Idea, What happen?
hi, you have to unlock the bands, to make the phone unbranded after this you will be available to get either gsm or 3g
Hey Guys,
I am missing gsm 2100 and 1700 bands (UMTS 900/2100/1700) on my phone on the em app how do i get them?
Why do you need them in the app? Is your phone not working on some particular provider's network?
Hey all,
I just realized the E900 and E900h have the same modem. The problem with the E900 is that the 850Mhz band is locked. Is there any way to unlock the 850 mhz band? I need it for better reception with ATT.
On the e900 in the MFG menu I have the option to select both cmda and gsm 850mhz band.
I did load the att apn and developer unlock my phone, but I never looked for that band before so you might not need to do those things.
I just developer unlocked my phone. However the 850 Mhz WCDMA band is still locked. Can you receive WCDMA 850?
I'm wondering if one can flash an lg e900 with an e900h rom. By doing this, will this enable the 850Mhz band?
Thanks
Can I flash an E900H rom onto an E900?
I don't know about flashing the e900 rom, I have the stock vodophone rom updated to mango.
and I have 850, 1900 and 2100 bands displayed in my engineering menu > modem options > band selections. Not sure what to tell you.
@Etaduck
Yes I have the 850mhz WCDMA option in MFG. However it is not picking up an actual 850 WCDMA signal. Is your phone picking up 850 for 3g?
I select 850 wcdma restart and get 3g / h depending on where I'm located, but I usually just leave it on wmda automatic
I'm not sure if there is any other way to test what band I'm using, but I'm assuming that selecting it from the MFG menu would be using the 850 band.
can you tell me the exact configuration of your phone? Did you use MFG or Network setup? I desperately need the band as 3g in my area is 850.
AFAIK mobile devices need different communication hardware to physically access some frequencies.
Whilst there may be a software switch to activate access to a frequency.. that does not mean that the unit will contain the hardware to do so.
If I am wrong on this I would appreciate advice.
EDIT: More on this topic and an aswer similar to above here...
http://forum.xda-developers.com/showthread.php?t=1067830
E900 and E900h have different hardware conf, most likely different flash ic so its not recomended to cross flash it.