Database Users

Does your 'Phonepad' input method work?

Hi, when entering text on the touchscreen, if you click the small keyboard icon at the bottom you get a choice of input methods like Transcriber, Keyboard, Phonepad... For me, when I click Phonepad it just brings up the regular QWERTY keyboard, not the nice chunky Phonepad skin that 2003 used to use for T9 input. Anyone got this same problem or is it just me?

I've never had a 2003 device, so I'm not sure if it's the same as 2003 or not, but I definitely get a phone pad type thing when I click on phonepad with my Jasjar.
HTH,
Brett

Is it the same Phonepad you get with the 'Keyboard' option from that menu, or is it a sort of 3D modelled effect numeric keypad only with the T9 alphabet on the number keys?
If the latter, anyone any idea why mine isn't?

It's definitely different than the Keyboard option and it sounds like what you're describing... a sort of 3D phone dial pad thing with a couple of extra buttons thrown in (arrows mostly).
I have no idea why yours isn't working... as much of a pain as it is, maybe try a hard reset? I had a problem getting my LED to notify me of new mail messages... it seemed to work for everyone but me. Finally I gave in and did the hard reset and it's been working fine since.
Brett

Just as I got it all how I like it!
Is there a good, free, backup program out there for WM2005?

Ok this is weird, it wasn't working, then I messed with some of the Phonepad Options (changed language, unticked boxes, etc.) to try to trip it into life, and it worked!
Then stopped working
Back to just Keyboard now. Any other ideas guys? Maybe a registry entry that tells the device what applet to call upon to show the input method?

Mine is very dodgy too. It works at times and then at other times changing to is simply causes the standard keyboard to appear. I *think* it's a memory issue as I've found that closing all applications through the task manager, then changing the input method to Block Recognizer and then back to phone pad sometimes works.
I've tried more than one hard reset without any luck...
Dave

Mine is very dodgy too. It works at times and then at other times changing to is simply causes the standard keyboard to appear. I *think* it's a memory issue as I've found that closing all applications through the task manager, then changing the input method to Block Recognizer and then back to phone pad sometimes works.
I've tried more than one hard reset without any luck...
Dave

Glad its not just me. Damn that memory issue!

Try to make Phonepad als default
Same Problem,
no memory Problem.
Try to make PhonePad als default SIP. It works fine on my MDA Compact (Marican) GERMAN T-Mobile
But when i switch back to Keyboard it will hang.

Somewhere on this site's FTP ftp://[email protected]/ there is a phonepad application you can download. I did and it re-installed the program which then worked. You could try that. Good luck!

I had the same problem and used the a quick fix for it disappearing found somewhere on the forum,
something along the lines of do a reset
go into contacts
choose phonepad input method
and it will display correctly until next time it goes wrong.
However upgrading to the latest rom it has never disappeared for me yet.

03 has no such keypad. Not on my XDA2 anyway. There is a 3rd party app called Quickey though which does the job reasonably.

I think the problems with the phone pad entry has been fixed in the last 2 software updates from O2 - are you still on the old versions?
I had the same problems when I first got my Exec but not had any issues with it for a while now.
Smiffy.

Has anyone found the fix to the phone pad issue? Been around in the FTP site but do not find the phone pad application. Any kind souls to help?

there is no fix for the keypad issue i looked and looked and looked the only way i got it to reappear was by upgrading to a new rom it still wouldn't appear with any other rom previous to aku 2 either but now i am running on summiter's aku 2.2 rom for my wizard and it works great and the phone pad is there

Is there an solution out there?
I have the same problem with my htc p3600.. the phonepad does not appear...

Solution Found
I have a solution and it works for me...
1)Switch off any devices like WiFi, Bluetooth, and for the moment disable any start-up applications (from starting) - To minimize system memory usage
I have done it with SPB Pocket Plus. It can disable any start-up application becuase it starts in "safe-mode"...
2)Remove CF and SD storage cards - There have been some bugs reported for storage cards where they may drain system resources if too many applications are loaded on the cards.
3)Select the default keyboard as the default input method - To temporarily prevent other input methods from being the default method
4)Soft reset the device
5)Open an application like Notes/Word
6)Select Phone Pade as the input method by clicking on the screen's bottom right icon's arrow and selecting Phone Pad from the list of available input options.
7)You should be able to use Phone Pad in all other applications as well as switching on WiFi and the start-up applications.
For me works fine, after soft reset !!!
Please try this solution.... and give us feedback!!
Greetings chrisonline

annoying software keyboard popup in landscape mode

with my german MDA Pro I experience a very annoying behavior of the software keybord (the one displayed on the screen). Whenver I focus an textfield (i.e. pocketIE adressbar, or when renaming a file in total commander etc.) that software keyboard pops up. Now as long as I am in portrait mode that MIGHT be a helpful feature. But when I am in landscape mode and I have the hardwarekeyboard available this is useless and annoying. So is there a way to surpress this? I seems that this popup does nto happen always. Sometimes it does, sometimes it doesn't - I just was not able to find out what it depends on.

Same Prob too.
It sucks !
Someone can help ?

PHM PowerToys has an "Extended Keyboard SIP" bundled in with all its other goodies. No keyboard pops up when you select that as your default input method.
I found a "ripped" version of just the keyboard SIP without having to install all the other stuff.
http://www.freewareppc.com/utilities/phmpocketpcpowertoys.shtml (watch for popups)
http://www.beyondthetech.com/downloads/phone/PHMPPCPT.Rpr_ARM_SIPonly.CAB
Let me know if this works for you.

what does this keyboard tool actually do? does it just set some registry setting ? can I uninstall it after I have run it ? Or must this App raun ALL THE TIME to make it work ? (the latter would suck since eats ressources)

It just add another SIP into your other one
But this time, it will show nothing so you can use your keyboard freely
And no, it should not take up any resource, if any, it will be very very very little

Fear not chaps, I posted about this and just use the hard keyboard and it 'learns' not to pop up in landscape mode.
Hope it helps

it does learn, but i think it learned by selecting an alternative input as the default.

Desired Keyboard not selected in Input

Hi to all respected members !
im usining htc p3600 (trinity) i load few keyboard such as resco keybpard, pcmkeyboard & messagease ! but i cant able select any of these keyboard only keyboard i able to use is default one which cames with windows need help & guidance plz im new in here ! thanks in Adv.

it may help if you instal additional keyboards in the main memo (not the memory card) and use a program like IMSelector (not sure where to get it from).

keyboard select problem
i did install in main memo but nothing happen ...same problem again ! none of additional keyboard select while they says installation successful & i already reset many times

same problem!

killereyez said:
Hi to all respected members !
im usining htc p3600 (trinity) i load few keyboard such as resco keybpard, pcmkeyboard & messagease ! but i cant able select any of these keyboard only keyboard i able to use is default one which cames with windows need help & guidance plz im new in here ! thanks in Adv.
Click to expand...
Click to collapse
Ive been using SPB Full Screen Keyboard. It works like a dream, both portrait and lanscape mode (landscape better ) Fully customised keyboards to download for FREE I would fully recommend this!!! Best of all, when installing it gives you the option to 'map' a button to activate the keyboard
Google it, try it, buy it
EDIT-oh, I forgot to mention, being a full screen keyboard it makes it difficult to see what your typing but you can scroll left and right. If you map a buttton, it takes a second to start-up and close down with a push of the button!!!!

Have a look at this link Using alternate keyboards, i had a similar problem and installing the G4 SIP manager solved the problems.

TouchPal wont show after a while

Hi folks
I love this forum and am so glad its here, it seems to be the only place where ppl can get support for the HD right now.
I am using the TouchPal keyboard 3.5. It installed fine and I started using it and configuring it grand etc. But after a while it stops responding.
If I click on the small keyoard icon at the bottom of my screen, no keyboard pops up whatsoever. If I go to settings and change the default keyboard from TouchPal to say - Full Querty and press OK, the change does not take place (If I go back into settings, the keyboard is reset to TouchPal).
So I am left wthout a keyboard and I have to do a full restart of the phone. If I uninstall TouchPal all is well and the keyboard system reverts back to working normally.
Has anyone else expereinced similar ?
Many thanks for any help
gt

iv got version 3.5 aswel, iv had no problems with it
the only problem i have is that, in landscape mode the key sizes dont increase, it appears small, but never the less a great keyboard

Hi xdaman85
Try running Remote Desktop and see if the keyboard behaves there, thats where it dies on me.

gt112 said:
Hi xdaman85
Try running Remote Desktop and see if the keyboard behaves there, thats where it dies on me.
Click to expand...
Click to collapse
just tried that, no problem what so ever
try this
uninstall, soft reset, install, soft reset, then go to settings, inputs, choose touchpal as default keyboard, then press ok, then soft reset
i know thats long but it should do the trick, seems to me as if that it wasnt installed correctly and theres some errors, so try what i said and let me know if it works

OK guys, it seems I am not alone in having prolems with TouchPal on the HD. See this thread on CoolTek's forum.
http://www.cootek.com/forum/forum_posts.asp?TID=742&PN=1
I have tried everything, I have uninstalled the kb, reinstalled it. Last night I completely reinstalled the entire phone (hard reset, wipe, reistall) but TouchPal still stops working after a while.

gt112 said:
OK guys, it seems I am not alone in having prolems with TouchPal on the HD. See this thread on CoolTek's forum.
http://www.cootek.com/forum/forum_posts.asp?TID=742&PN=1
I have tried everything, I have uninstalled the kb, reinstalled it. Last night I completely reinstalled the entire phone (hard reset, wipe, reistall) but TouchPal still stops working after a while.
Click to expand...
Click to collapse
just the thread, i guess your right, your not alone...but..its still wierd as iv been using touchpal since last wednesday and its still working fine for me
could it be that touchpal is conflicting with another keyboard on the device?
Have you gone to settings/inputs and selected touchpal as the keyboard?
I cant think of any other ideas because its working perfectly for me

Thanks xdaman
Just done a new re-install and it seems ok now. TBH I am now using the version from Cooltek so I may have had myself to blame.
On another note, I am having probs setting custom commands, I have the followig questions, can anyone offer any wisdom ?
You can setup custom commands such as Ctrl+z etc. They can be stored in place holders accessed by tab+downslide on the Control Tab button (the one with the 4 arrows). The instructions for creating custom command scan be found in the manual (section 4.2) here
Here are my questions
1. How do you create a combination command? e.g. They have a built in command called "Select All && Copy". This is 2 commands. How do you create this ?
2. After I mess up all my command buttons. How do I reset them to their defaults ?
3. When I create a command, Is Flag5 the ASCII key code? The manual is not specific on this. Also, if Flag5 is the ASCII code, why do I need to then enter the Alphabet index of the letter ?
4. I only seem to be able to edit the top Custom command button. If I try and assign values to the lower buttons, the edit appears in the top button. Is this a bug ?

cant install/wont install
downloaded the cab file..after it ran..it looks like explorer window pops up and tried to o something..anyway it says the page cant be found..tried loading in both card and local and get the same response..it does tell me the it was unsuccessful in loading
i gues its the lastest becuase i downloaded from the site
gt112 said:
Hi folks
I love this forum and am so glad its here, it seems to be the only place where ppl can get support for the HD right now.
I am using the TouchPal keyboard 3.5. It installed fine and I started using it and configuring it grand etc. But after a while it stops responding.
If I click on the small keyoard icon at the bottom of my screen, no keyboard pops up whatsoever. If I go to settings and change the default keyboard from TouchPal to say - Full Querty and press OK, the change does not take place (If I go back into settings, the keyboard is reset to TouchPal).
So I am left wthout a keyboard and I have to do a full restart of the phone. If I uninstall TouchPal all is well and the keyboard system reverts back to working normally.
Has anyone else expereinced similar ?
Many thanks for any help
gt
Click to expand...
Click to collapse

Touchpal freezing

Hi,
I use Touchpal V3.5 and i absolutely love it, if you haven't tired it I highly recommend it, especially good is the mixed language input and I actually type faster using touchpal+gsen in landscape mode than I did with a hardware keyboard (a worry that almost prevented me from buying this marvelous device). I do have two little niggles that would be great if i could overcome somehow:
1. Setting Touchpal to the default keyboard does not stick after a restart/reset. I have to change the keyboard each time i start up. I tried SIP Change but it doesn't seem to have an option for running at start-up....anyone know if i can get at the registry somewhere or something?
2. When I first open it, if i try to type in Chinese before using English, it freezes in a bad way, disabling EVERY window that tries to call the sip and requiring a soft reset to make the phone useable again. If I open it, type something in english, and then switch the input to chinese it runs like a charm until I restart again...what is that about?
Actually neither of these issues is a deal breaker, but it would be nice not to have to worry about it, is anyone else having these troubles?...any suggestions are greatly appreciated!

touchpal
i have touchpal also and cant keep it as default. Ive tried all the fixes there are on all the threads. Doesnt work for Touchpal. any suggestions or fixes would be greatly appreciated.

Well I figured out the answer to problem one on my own...TF3D takes a little time to load and interferes with SipChange so you need to adjust the delay so as to happen after TF3D is finished.
Just tap SIPChange, select the IM you want, and set the time to 45 seconds (shorter may work). Bingo, stays the default IM on restart

whats the difference (apart from it's tabulated) between touchpal and "compact QWERTY" mode keyboard?

you also need to Go make this change: HKCU\Software\HTC\BootLauncher\Apps and remove the folder called "Startkey"

I have the same problem with touchpal, where do i do this?
Just tap SIPChange, select the IM you want, and set the time to 45 seconds (shorter may work). Bingo, stays the default IM on restart

@FRUSTIN:
TOuchpal is third-party software by CooTek, "Compact Querty" is just a different layout for the tock HTC input method. TOuchpal is MUCH more feature rich and just kicks the [email protected] out of the default keyboard in every way, it supports tons of languages and multi-language input (go back and forth between two languages in the same sentence without changing any settings), web hotkeys, adds copy/cut/paste and D-pad to EVERY app, etc. check it out at www.cootek.com
@DIAMONDBS:
I did NOT do that and it works perfectly for me...why do you need to remove an entire folder from the registry? Can anone confirm this?
@WEETABIX1980:
Just go to start>programs>SIP Change, when the program opens you select Touchpal from the list of input methods and then change the numbers in the box below the list to 45, then click "Select"...should be the only button there...tapping "OK" is not good enough, be sure to tap "Select"

thanks, any clue what sip change in dutch is in the programs?

anyone knows this?

SIPChange is a little tool developed here at XDA:
http://forum.xda-developers.com/showthread.php?t=271008
Download the cab to your phone and install. This should then give you the options mentioned above.

Touchpal intermittantly hangs on me aswell. I post on here about it before. I tried allsorts to cure it (hard resets, clean installs etc). So annoying when demoing the phone to a friend and all of a sudden the keyboard hangs and wont popup.
I used to love Touchpal, now I hate it and will not install it on my phone.