Hi, when entering text on the touchscreen, if you click the small keyboard icon at the bottom you get a choice of input methods like Transcriber, Keyboard, Phonepad... For me, when I click Phonepad it just brings up the regular QWERTY keyboard, not the nice chunky Phonepad skin that 2003 used to use for T9 input. Anyone got this same problem or is it just me?
I've never had a 2003 device, so I'm not sure if it's the same as 2003 or not, but I definitely get a phone pad type thing when I click on phonepad with my Jasjar.
HTH,
Brett
Is it the same Phonepad you get with the 'Keyboard' option from that menu, or is it a sort of 3D modelled effect numeric keypad only with the T9 alphabet on the number keys?
If the latter, anyone any idea why mine isn't?
It's definitely different than the Keyboard option and it sounds like what you're describing... a sort of 3D phone dial pad thing with a couple of extra buttons thrown in (arrows mostly).
I have no idea why yours isn't working... as much of a pain as it is, maybe try a hard reset? I had a problem getting my LED to notify me of new mail messages... it seemed to work for everyone but me. Finally I gave in and did the hard reset and it's been working fine since.
Brett
Just as I got it all how I like it!
Is there a good, free, backup program out there for WM2005?
Ok this is weird, it wasn't working, then I messed with some of the Phonepad Options (changed language, unticked boxes, etc.) to try to trip it into life, and it worked!
Then stopped working
Back to just Keyboard now. Any other ideas guys? Maybe a registry entry that tells the device what applet to call upon to show the input method?
Mine is very dodgy too. It works at times and then at other times changing to is simply causes the standard keyboard to appear. I *think* it's a memory issue as I've found that closing all applications through the task manager, then changing the input method to Block Recognizer and then back to phone pad sometimes works.
I've tried more than one hard reset without any luck...
Dave
Mine is very dodgy too. It works at times and then at other times changing to is simply causes the standard keyboard to appear. I *think* it's a memory issue as I've found that closing all applications through the task manager, then changing the input method to Block Recognizer and then back to phone pad sometimes works.
I've tried more than one hard reset without any luck...
Dave
Glad its not just me. Damn that memory issue!
Try to make Phonepad als default
Same Problem,
no memory Problem.
Try to make PhonePad als default SIP. It works fine on my MDA Compact (Marican) GERMAN T-Mobile
But when i switch back to Keyboard it will hang.
Somewhere on this site's FTP ftp://[email protected]/ there is a phonepad application you can download. I did and it re-installed the program which then worked. You could try that. Good luck!
I had the same problem and used the a quick fix for it disappearing found somewhere on the forum,
something along the lines of do a reset
go into contacts
choose phonepad input method
and it will display correctly until next time it goes wrong.
However upgrading to the latest rom it has never disappeared for me yet.
03 has no such keypad. Not on my XDA2 anyway. There is a 3rd party app called Quickey though which does the job reasonably.
I think the problems with the phone pad entry has been fixed in the last 2 software updates from O2 - are you still on the old versions?
I had the same problems when I first got my Exec but not had any issues with it for a while now.
Smiffy.
Has anyone found the fix to the phone pad issue? Been around in the FTP site but do not find the phone pad application. Any kind souls to help?
there is no fix for the keypad issue i looked and looked and looked the only way i got it to reappear was by upgrading to a new rom it still wouldn't appear with any other rom previous to aku 2 either but now i am running on summiter's aku 2.2 rom for my wizard and it works great and the phone pad is there
Is there an solution out there?
I have the same problem with my htc p3600.. the phonepad does not appear...
Solution Found
I have a solution and it works for me...
1)Switch off any devices like WiFi, Bluetooth, and for the moment disable any start-up applications (from starting) - To minimize system memory usage
I have done it with SPB Pocket Plus. It can disable any start-up application becuase it starts in "safe-mode"...
2)Remove CF and SD storage cards - There have been some bugs reported for storage cards where they may drain system resources if too many applications are loaded on the cards.
3)Select the default keyboard as the default input method - To temporarily prevent other input methods from being the default method
4)Soft reset the device
5)Open an application like Notes/Word
6)Select Phone Pade as the input method by clicking on the screen's bottom right icon's arrow and selecting Phone Pad from the list of available input options.
7)You should be able to use Phone Pad in all other applications as well as switching on WiFi and the start-up applications.
For me works fine, after soft reset !!!
Please try this solution.... and give us feedback!!
Greetings chrisonline
Related
I have tried sip change but I can't get phone pad to work on the trinity.
It has worked a couple of times and when it does it is great. As other members have said it is more likely to work if you go from keyboard to transcriber and then to phone pad. When I installed spb diary it stopped working completely and so did calligrapher, which had been working fine. I have now remved the spb diary today screen plug in and calligrapher has started working but whatever I try I can't get phone pad to work ever .
Swede claims to have this working http://forum.xda-developers.com/showpost.php?p=1097471&postcount=25
but id definitely doesn't for me.
It seems like the problem is a combo of OS, additional software (definitely spb diary) and maybe other factors
Does anyone have any ideas or a suggestion for a different T9 input program (not tengo!)?
Thanks for any help
yeah, set it as default SIP with SKTools, works everytime.
HTC Phone Pad Input v1.0 build 22364
Apoc said:
yeah, set it as default SIP with SKTools, works everytime.
HTC Phone Pad Input v1.0 build 22364
Click to expand...
Click to collapse
Mine works too, phonepad international
I've changed some values in the registry and set in as default
Apoc said:
yeah, set it as default SIP with SKTools, works everytime.
HTC Phone Pad Input v1.0 build 22364
Click to expand...
Click to collapse
Hi,
please where can I find your PhonePad version? Has it all languages? If you can please post it to [email protected]
THX
I have the same problem. Works fine for a while, then it refuses to switch to the phone pad unless i soft reset, it just keeps reverting back to the keyboard.
I havent tried setting the default SIP, as I want the keyboard to be the default SIP, i just use the phonepad for text messages.
I haven't figured out if its clashing with any of the other software I have installed, (I have so many). Its annoying me though!
I have a similar problem...i can see the option of phonepad in the sip menu, but whenever I choose it it switchs back to keyboard...in fact I've never been able to get it to work.
Someone had me download a program called sipchange and its an app that makes it so you can change the preferred sip but even then it still goes back to keyboard...
Here is what I'm thinking could be a problem...
Right now, I have smart dial (since this is an HTC phone) but other than that, I don't have a keypad with numbers on it...so maybe I need a file somewhere with a pic of the keypad (1-0 a-z)
Does that make any sense?
L
I have downloades and installed the PhonePad from this Thread:
http://forum.xda-developers.com/showthread.php?t=284378&highlight=intellipad
It works fine in english but in german the phonepad does not appear!?!?
I click on phonepad and then the normal keyboard does appear...
When i switch back to english the phonepad comes up correctly...
Please help!! Without phonepad writing sms is terrible ;-)
Solution Found
I have a solution and it works for me...
1)Switch off any devices like WiFi, Bluetooth, and for the moment disable any start-up applications (from starting) - To minimize system memory usage
I have done it with SPB Pocket Plus. It can disable any start-up application becuase it starts in "safe-mode"...
2)Remove CF and SD storage cards - There have been some bugs reported for storage cards where they may drain system resources if too many applications are loaded on the cards.
3)Select the default keyboard as the default input method - To temporarily prevent other input methods from being the default method
4)Soft reset the device
5)Open an application like Notes/Word
6)Select Phone Pade as the input method by clicking on the screen's bottom right icon's arrow and selecting Phone Pad from the list of available input options.
7)You should be able to use Phone Pad in all other applications as well as switching on WiFi and the start-up applications.
For me works fine, after soft reset !!!
Please try this solution.... and give us feedback!!
Greetings chrisonline
Same pb with Tengo Xrgonomics and and SPB Full Screen
I've experienced the same pb Chrisonline . Sometimes these apps work fine and some other times i only have default Keyboard. Soft Reset is a solution (with or without start up applications) but it not last long . Pb come back after few times... Does your solution last in time or do you have to do a soft reset time to time ?
Thanks for the lead, to be continued
After this solution the phonepad is always active....
But after a 2nd softreset the phonepad is gone and the keyboard shows up...
Then i must do the solution written above and the phonepad is active again...
Very strange, but a workaround...
I have the same problem with the TENGO-Keyboard...
I think this is a problem with the wm5 and not with the software!??!
Hi folks
I love this forum and am so glad its here, it seems to be the only place where ppl can get support for the HD right now.
I am using the TouchPal keyboard 3.5. It installed fine and I started using it and configuring it grand etc. But after a while it stops responding.
If I click on the small keyoard icon at the bottom of my screen, no keyboard pops up whatsoever. If I go to settings and change the default keyboard from TouchPal to say - Full Querty and press OK, the change does not take place (If I go back into settings, the keyboard is reset to TouchPal).
So I am left wthout a keyboard and I have to do a full restart of the phone. If I uninstall TouchPal all is well and the keyboard system reverts back to working normally.
Has anyone else expereinced similar ?
Many thanks for any help
gt
iv got version 3.5 aswel, iv had no problems with it
the only problem i have is that, in landscape mode the key sizes dont increase, it appears small, but never the less a great keyboard
Hi xdaman85
Try running Remote Desktop and see if the keyboard behaves there, thats where it dies on me.
gt112 said:
Hi xdaman85
Try running Remote Desktop and see if the keyboard behaves there, thats where it dies on me.
Click to expand...
Click to collapse
just tried that, no problem what so ever
try this
uninstall, soft reset, install, soft reset, then go to settings, inputs, choose touchpal as default keyboard, then press ok, then soft reset
i know thats long but it should do the trick, seems to me as if that it wasnt installed correctly and theres some errors, so try what i said and let me know if it works
OK guys, it seems I am not alone in having prolems with TouchPal on the HD. See this thread on CoolTek's forum.
http://www.cootek.com/forum/forum_posts.asp?TID=742&PN=1
I have tried everything, I have uninstalled the kb, reinstalled it. Last night I completely reinstalled the entire phone (hard reset, wipe, reistall) but TouchPal still stops working after a while.
gt112 said:
OK guys, it seems I am not alone in having prolems with TouchPal on the HD. See this thread on CoolTek's forum.
http://www.cootek.com/forum/forum_posts.asp?TID=742&PN=1
I have tried everything, I have uninstalled the kb, reinstalled it. Last night I completely reinstalled the entire phone (hard reset, wipe, reistall) but TouchPal still stops working after a while.
Click to expand...
Click to collapse
just the thread, i guess your right, your not alone...but..its still wierd as iv been using touchpal since last wednesday and its still working fine for me
could it be that touchpal is conflicting with another keyboard on the device?
Have you gone to settings/inputs and selected touchpal as the keyboard?
I cant think of any other ideas because its working perfectly for me
Thanks xdaman
Just done a new re-install and it seems ok now. TBH I am now using the version from Cooltek so I may have had myself to blame.
On another note, I am having probs setting custom commands, I have the followig questions, can anyone offer any wisdom ?
You can setup custom commands such as Ctrl+z etc. They can be stored in place holders accessed by tab+downslide on the Control Tab button (the one with the 4 arrows). The instructions for creating custom command scan be found in the manual (section 4.2) here
Here are my questions
1. How do you create a combination command? e.g. They have a built in command called "Select All && Copy". This is 2 commands. How do you create this ?
2. After I mess up all my command buttons. How do I reset them to their defaults ?
3. When I create a command, Is Flag5 the ASCII key code? The manual is not specific on this. Also, if Flag5 is the ASCII code, why do I need to then enter the Alphabet index of the letter ?
4. I only seem to be able to edit the top Custom command button. If I try and assign values to the lower buttons, the edit appears in the top button. Is this a bug ?
cant install/wont install
downloaded the cab file..after it ran..it looks like explorer window pops up and tried to o something..anyway it says the page cant be found..tried loading in both card and local and get the same response..it does tell me the it was unsuccessful in loading
i gues its the lastest becuase i downloaded from the site
gt112 said:
Hi folks
I love this forum and am so glad its here, it seems to be the only place where ppl can get support for the HD right now.
I am using the TouchPal keyboard 3.5. It installed fine and I started using it and configuring it grand etc. But after a while it stops responding.
If I click on the small keyoard icon at the bottom of my screen, no keyboard pops up whatsoever. If I go to settings and change the default keyboard from TouchPal to say - Full Querty and press OK, the change does not take place (If I go back into settings, the keyboard is reset to TouchPal).
So I am left wthout a keyboard and I have to do a full restart of the phone. If I uninstall TouchPal all is well and the keyboard system reverts back to working normally.
Has anyone else expereinced similar ?
Many thanks for any help
gt
Click to expand...
Click to collapse
Hi all,
I'm having a problem with the HTC SIPs (Full Qwerty and Compact Qwerty) - they're both stuck on numeric input and won't switch back to text input mode.
ie, I click on the "ABC" button and nothing happens. I therefore can't enter anything other than numbers and symbols!
Has anyone else seen this issue? I'm having to use PCM Keyboard in the meantime, which is frustrating as it doesn't have easy access to "." etc.
Thanks
J
PCM Keyboard prevents the HTC SIPs from working properly. Either remove PCK Keyboard or try the latest version (0.19)
I have the same problem
I have the same problem.
I haven't installed any additional keyboard software, and suddenly my text keyboard is stuck on numerics.
I have a feeling this may have been something to do with the latest firmware from HTC that I've recently installed.
Anyone got any ideas?
Thanks in advance
Pete
Petee said:
I have the same problem.
I haven't installed any additional keyboard software, and suddenly my text keyboard is stuck on numerics.
I have a feeling this may have been something to do with the latest firmware from HTC that I've recently installed.
Anyone got any ideas?
Thanks in advance
Pete
Click to expand...
Click to collapse
Do you have HD Tweak installed?
this will happen if you enable T9
Sorted
Yep, that was it
Sorted - Thankyouverymuchsir
okay so I too now have this same problem, originally I had Dutty's Leo R6 on my phone with HDTweak so I decided to reflash my phone with Dutty's Leo R7 and this time not install HDTweak and see if it works.... But even after doing that, I still keep getting all 3 types of the keyboard inputs stuck on numbers and symbols. after a soft reset whenever I try and type in a text, the first time it usually works fine. But after I have sent the 1st message or just returned to the home tab and try to write another msg, all input keyboards are stuck. Note: I can temporarily fix it by clicking on a previous message, waiting for the menu to popup from the threaded view and then closing it, but after writing that message it will revert back to being stuck
So no HDTweak installed, using new HTC Messaging App, have turned off T9 Autocompletion + Symbol Lock under Input Options and I have also tried installing geniusgeng's cab here: http://forum.xda-developers.com/showthread.php?t=486187&highlight=[solution]+qwerty+keyboard but that doesn't work...any thoughts on how I can fix this with something more permanent?
Thanks
Not sure of any reg tweaks, but why don't you install HD Tweak and then disable T9
Hey, thanks for the amazingly fast reply!!!
okay so I just tried reinstalling HDTweak again and disabling T9, but its still not working I keep having the same trouble. I have also tried all different combinations of disabling T9 only in HDTweak, or both HDTweak and under Input Options and only in Input Options and so on.... but the problem doesn't seem to get resolved.
I have experimented some more and it turns out that the keyboard will only get stuck when I go to the messages tab and click on a text I received to reply to it. If i go to the messages tab and create a new message (where I have to enter in the contact and can't see the threaded msgs) then the keyboard is fine all the time. Does anyone else have this same problem as well, or is it just me?
I would really prefer to be able to quickly reply to texts instead of creating new messages every time...gonna try disabling the htc messaging app (was going to anyway cause it takes waaaay too loooong lol) and see if that magically works
Thanks again!
I had a similar problem and fixed it
I logged on here to see if someone could tell me how to fix my issue, but it is regarding an HTC HD2, not a Blackberry. My problem was similar but not exactly the same. My phone somehow permanently got stuck on Xt9, which I hate and am worthless at using. I couldn't seem to find the answer anywhere online so i'm writing my experience here in case it helps anyone.
Hitting the XT9 / ABC button did NOTHING to fix it. Even though the button would visually change from XT9 to ABC and back, when I hit it (it would change to a green color), the keys themselves would not change at all, and i was stuck looking at keys that make zero sense to me qw... er...ty... ui.... it was like a bad nightmare. I have no idea how I managed to get it stuck on this (sorry I know most of you techies probably have no problem with it but I am just not very tech savvy).
I tried taking out my battery, popping the sim card in and out several times, restarting. Sounds stupid but I didn't know what else to do as I couldn't find any solutions online. Finally called tmobile.
First the rep told me to try going to Settings > Locale and Text > Text Input. She asked what my settings were on, I said ABC. She told me to turn it to XT9 instead, then close out the screen, go back, then switch back to ABC. I did that, and no dice. I figured either the settings are frozen or I'm cursed.
Then she had me go to the screen to write a text msg. When your cursor is in the text box to write in, you will see a little keyboard icon at the bottom of the screen. There's a little arrow next to it. Click on that arrow. That brought up the options of Full QWERTY and Compact QWERTY, and apparently somehow my phone got switched to Compact QWERTY. So I switched back, and that fixed it.
So yeah, apparently there are a couple of different ways to change it.
I wanted to hug this woman through the phone, i was so relieved to be able to text again (I could not write out one single word while on Compact QWERTY). I'm not sure if going this route can help anyone else but it was the answer for me. There may be other options for you when you click on the arrow next to the keyboard.
Good luck!
Hi,
I use Touchpal V3.5 and i absolutely love it, if you haven't tired it I highly recommend it, especially good is the mixed language input and I actually type faster using touchpal+gsen in landscape mode than I did with a hardware keyboard (a worry that almost prevented me from buying this marvelous device). I do have two little niggles that would be great if i could overcome somehow:
1. Setting Touchpal to the default keyboard does not stick after a restart/reset. I have to change the keyboard each time i start up. I tried SIP Change but it doesn't seem to have an option for running at start-up....anyone know if i can get at the registry somewhere or something?
2. When I first open it, if i try to type in Chinese before using English, it freezes in a bad way, disabling EVERY window that tries to call the sip and requiring a soft reset to make the phone useable again. If I open it, type something in english, and then switch the input to chinese it runs like a charm until I restart again...what is that about?
Actually neither of these issues is a deal breaker, but it would be nice not to have to worry about it, is anyone else having these troubles?...any suggestions are greatly appreciated!
touchpal
i have touchpal also and cant keep it as default. Ive tried all the fixes there are on all the threads. Doesnt work for Touchpal. any suggestions or fixes would be greatly appreciated.
Well I figured out the answer to problem one on my own...TF3D takes a little time to load and interferes with SipChange so you need to adjust the delay so as to happen after TF3D is finished.
Just tap SIPChange, select the IM you want, and set the time to 45 seconds (shorter may work). Bingo, stays the default IM on restart
whats the difference (apart from it's tabulated) between touchpal and "compact QWERTY" mode keyboard?
you also need to Go make this change: HKCU\Software\HTC\BootLauncher\Apps and remove the folder called "Startkey"
I have the same problem with touchpal, where do i do this?
Just tap SIPChange, select the IM you want, and set the time to 45 seconds (shorter may work). Bingo, stays the default IM on restart
@FRUSTIN:
TOuchpal is third-party software by CooTek, "Compact Querty" is just a different layout for the tock HTC input method. TOuchpal is MUCH more feature rich and just kicks the [email protected] out of the default keyboard in every way, it supports tons of languages and multi-language input (go back and forth between two languages in the same sentence without changing any settings), web hotkeys, adds copy/cut/paste and D-pad to EVERY app, etc. check it out at www.cootek.com
@DIAMONDBS:
I did NOT do that and it works perfectly for me...why do you need to remove an entire folder from the registry? Can anone confirm this?
@WEETABIX1980:
Just go to start>programs>SIP Change, when the program opens you select Touchpal from the list of input methods and then change the numbers in the box below the list to 45, then click "Select"...should be the only button there...tapping "OK" is not good enough, be sure to tap "Select"
thanks, any clue what sip change in dutch is in the programs?
anyone knows this?
SIPChange is a little tool developed here at XDA:
http://forum.xda-developers.com/showthread.php?t=271008
Download the cab to your phone and install. This should then give you the options mentioned above.
Touchpal intermittantly hangs on me aswell. I post on here about it before. I tried allsorts to cure it (hard resets, clean installs etc). So annoying when demoing the phone to a friend and all of a sudden the keyboard hangs and wont popup.
I used to love Touchpal, now I hate it and will not install it on my phone.