Does anyone know how to disconec 3g/gprs in today screen
when i use tytn2..i just klick(touch) 3G/GPRS icon to disconect my conection
but when i use xperia i can't find icon disconec in 3G or GPRS icon...
sory my english very bad...
my problem when i conected gprs or 3g and
i want to disconect my conection...
my step so long ...click signal icon--and i go to com manager - >data conection ->turn off
but when i use other pda(tytn2) i just clik 3g icon and just click disconect to end my conection...
There's a tool which involves a similar procedure but which will Close (unlike the ConMgr) properly and release RAM.
Go to /Windows where you will find DataDisconnect.exe. Copy this and Paste a shortcut to /Windows/Startmenu/Programs and then place it wherever you like. For example:
-Today-Plugin Launcher, such as the one included with Resco Explorer
-Startmenu
-Softkey
This is the fastest and best way I know to disconnect.
use sk tools to solve your problem
to solve your problem, just do a search in this forum for SK Tools.
install this to your phone/ sd card (up to you). within this program there is a tab called tune up, and withn this tab there is another tab that allows you to enable a "Disconnect Button" that shows when you select the 3g/GPRS icon.
just to clicks and your done...
Problem Solved
tktoby57 said:
sory my english very bad...
my problem when i conected gprs or 3g and
i want to disconect my conection...
my step so long ...click signal icon--and i go to com manager - >data conection ->turn off
but when i use other pda(tytn2) i just clik 3g icon and just click disconect to end my conection...
Click to expand...
Click to collapse
Spotted this in another thread - there's a registry hack you need to bring the disconnect button into the balloon:
HKLM\ControlPanel\Phone
create new dword value "Flags2"
value=8 show disconnect button
value=16 show disconnect button and connection time
Try that.
Credits to Veletron
http://forum.xda-developers.com/showpost.php?p=3472880&postcount=6
Calvin H said:
Spotted this in another thread - there's a registry hack you need to bring the disconnect button into the balloon:
HKLM\ControlPanel\Phone
create new dword value "Flags2"
value=8 show disconnect button
value=16 show disconnect button and connection time
Try that.
Click to expand...
Click to collapse
Seen this before. It doesn't work on my X1. The Button is supposed to be shown in the bubble that appears when you tap on the Signal Icon right?
Related
I search the link who launch the icon of BT on the botton right. I lost the icon and I don't want make an hard reset whith reinstall for retreive it.
Thank's
hope this help
try this:
There is a workaround for this problem.
It's not pretty, it requires hacking the registry, but it works.
I found it at http://www.ppc-welt.info/community/showthr...7403#post397403, but had to make a slight adjustment.
I assume that you know
- How to install form a CAB file
- How to create and edit a shortcut on your Pocket PC
- How to edit the registry on your Pocket PC
Ready? Here we go:
1) Download NoPluginsToday (you'll most likely want the ARM version) from http://www.ictinus.com/NoPluginsToday/
2) Install the CAB somewhere. Make sure you know the exact location of NoPluginsToday.exe (e.g. \Storage\NoPluginsToday\NoPluginsToday.exe)
3) Create a shortcut to NoPluginsToday.exe in \Windows\Startup. Name this shortcut ZzzNoPluginsToday, so that it is last in the list of shortcuts to be launched.
4) Start a registry editor, and go to HKLM\init. Look for keys named LaunchXX. You'll want to create a new String key named LaunchYY, where YY is a bigger number than any of the XX you found. I created Launch99. The value for LaunchYY is the exact location of NoPluginsToday.exe (e.g. \Storage\NoPluginsToday\NoPluginsToday.exe) you looked up earlier.
Now you're set! Do a soft reset, and see your Bluetooth icon again! You'll notice your startup time may be a little longer.
How does it work?
The BT icon disappears because of a timeout issue when loading plugins.
We solve this by using NoPluginsToday, which switches all Today plugins off, remembers the settings, and reactivates them the next time it is executed.
By calling NoPluginsToday twice, once via the registry (early) and then again via \Windows\Startup (late), we "postpone" the loading of Today plugins until after the BT icon has been activated. That's your longer startup time for you.
Hope this helps!
(from Pocket breeze website forum)
Thank's I try it when I have 20 minutes
Timon said:
Thank's I try it when I have 20 minutes
Click to expand...
Click to collapse
hi Timon,
you can maybe try this first:
http://forum.xda-developers.com/viewtopic.php?t=16252
buzz
Hello
I just flashed my 9100 with the new ROM and in commmanager, I can't activate ActiveSync (button is "grey")
Has someone already had/solved this problem ?
Tks
Hi, I am looking for this Comm Manager file, can you extract the .exe from the ROM (use Total Commander and copy it out of the /Windows folder) and post it here? thanks!
read the same problem you are having in another ROM, are you sure that you are connected with your dekstop? If you are not, the button is grey sometimes.
The button is grey when I'm connected or not to the PC.
3 buttons (push mail, connect, activeSync) are grey. I can only use the "phone", "bluetooth", "WiFi" and "Vibrate/Normal" buttons but not the other one.
Here is also the "CommManager.exe" program
Have you tried adapting the registry to point to the right files? In the universal upgrading forum there is a thread on which settings to adjust. try a search there and see if it htelps you. I will try the file you attached (thanks for that) tomorrow and see if it works for me.
Any other answer ?
See this thread http://forum.xda-developers.com/viewtopic.php?t=44091&highlight= for the registry settings used in the Universal to get the new Comm Manager with more options working. perhaps on your Wizard it uses the same settings?
If you connect To your PC, the AS icon becomes available, whenb you connect to gprs/edge, the disconnect data service becomes available and when pushmail is enabled, you can disable with the stop direct push button... works like a charm.
Why would you want a comm manager button to activate either one of these, for it happens automatically when any service requires so.
In the "old"Comm Manager you could also change the AS settings by tapping th AS symbol, even if the device was not connected. Now with the button greyed out, I guess he has to go to start-programs-AS to change them. possible, but not as easy. And it is nice to have all connections under 1 button. That's why I am trying to integrate the new file into my old ROM.
Ok, tried overwriting the old comm manager with the exe provided above, but no dice. The .exe in this thread is only half the size of my current working one. Also, the registry settings I got from the Universal forum don't work, we don't have the necessary keys, so looks like our Comm Manager is working with different keys, I cannot find which ones. The .exe file above just gives: Unable to get comm Manager settings. Perhaps someone can extract and post all the Comm Manager files ( not only the .exe) from their ROM?
For me the important one was ActiveSync. I'm used to lauch it via Comm Manager. And you are right :
- push e-mail is not available (-> OK)
- activeSync is available only if ActiveSync is running
- disconnect data service is available if GPRS is connected (I didn't know what it was, I could'nt test)
So ewerything is running all right. :-D
Thanks
I ran a TMO USA cab for the Comm Manager from an Ext ROM. I found the file on this forum and it is working right. It has the phone button instead of the sound/vibrate button, so that is a small improvement. If only someone could send me the file with also the direct push and gprs button in it, i'd be happy.
There is no short cut here for WLAN settings for WM5
http://www.xs4all.nl/~itsme/projects/xda/xda-controlpanel.html
Is there an exe file or something to open WLAN/Wifi settings directly after one click on the cursor !
please advise
the quickest way is by tapping the connection icon at the top of the screen, i think
Who knows how to disable the 3G, so the phone will work only in 2G?
amitbsh said:
Who knows how to disable the 3G, so the phone will work only in 2G?
Click to expand...
Click to collapse
Download and install Advanced Configuration.
Click Menu then select More Settings and then select Comm Manager.
Here you can select what items you want in the comm manager.
AllTheWay said:
Download and install Advanced Configuration.
Click Menu then select More Settings and then select Comm Manager.
Here you can select what items you want in the comm manager.
Click to expand...
Click to collapse
Unfortunatley this comm manager tab does nothing on my HD (also reported by other useres).....used to work fine on Diamond etc.
Anyway, the obvious but long way round would be (translated from German ROM): Start>Settings>Phone>Band>GSM
michi123 said:
Unfortunatley this comm manager tab does nothing on my HD (also reported by other useres).....used to work fine on Diamond etc.
Anyway, the obvious but long way round would be (translated from German ROM): Start>Settings>Phone>Band>GSM
Click to expand...
Click to collapse
I have the same problem. Any solution?
I get exactly the same problem. After searching maaaaaaany topics and forums it seems that band selection (3g-gsm switch) is managed by bandsel.exe or adminsettings.exe (in windows repertory). On HD you have neither of these. So on HD band selection is managed by another exe ... if someone can figure out witch exe it is, it should be quite easy to patch registry, in order to call this exe in comm manager.
hope you understood (I'm not very comfortable with english).
I have also tried to turn off 3G in the comm manager with no success. I like to turn it off most of the time as it saves battery when not having to search for a 3G signal. Has anyone found a way to disable 3G access on the HD, but leave GRPS enabled?
Try this Start -> Settings -> Phone -> Band -> choose GSM in the upper dropdown menu leave the other on auto.
With this setting you will have gsm and gprs/edge available but no 3G
hi all i want to put 3g in comm manager
becuse i cant turn it of by system > phone
i have some poplems with my sim card
or tell me another way to turn 3g off
oaldawe said:
hi all i want to put 3g in comm manager
becuse i cant turn it of by system > phone
i have some poplems with my sim card
or tell me another way to turn 3g off
Click to expand...
Click to collapse
Use Advanced Config 3.3 to modify your comm manager for the items that you want.
I was able to add beam and 3G.
thanks
i added it but it dosnt work
@ alltheway: have you tried to use the 3g-switch? i was able to set it into my comm manager but it doesn´t work. but in opposite to you i had no icon for it as well.
AllTheWay said:
Use Advanced Config 3.3 to modify your comm manager for the items that you want.
I was able to add beam and 3G.
Click to expand...
Click to collapse
AllTheWay said:
Use Advanced Config 3.3 to modify your comm manager for the items that you want.
I was able to add beam and 3G.
Click to expand...
Click to collapse
this was the first thing i tried. no luck! grayed...
It appears that if the PHONE setting is not displayed (the least useful switch if you ask me) then the DATA CONNECTIONS and 3G tabs will bevgreyed out an inaccessible.
Having said that, turning off data connection seems to be useless. It turns itself on the moment Opera or anything tries to access the net. I haven't tried it roaming yet but am going abroad next week so will update then.
I don't see the option in Advanced Config 3.3.
Any solution yet how to get 3G into the Comm Manager?
It's not in the regular options. Got to MENU (right soft key) then MORE SETTINGS then COMM MANAGER
Perhaps we need a 10 Button Manager
This is why it would be SOOOOO useful to have the old 10 button manager back from the Hermes days, just like the thread I started 14 Dec 08, but got no-where....
http://forum.xda-developers.com/showthread.php?t=459270
Just wish Schaps or some one would be able to help out and create a new 10 button manager and resolve ALL our issues.
Thank you, but doesn't work for me also. I need an option to change 3G to GPRS...
Hi!
In order that it works 3G in CommManager it is necessary to add a few values in the register.
I detail the steps, if you want to do it.
To enable 3G I have replaced it with Direct Push option, because I do not use her, but it can be for any different.
First we change the option "Direct Push" for "3G":
You should accede to the key of the register "\HKLM\Software\HTC\CommManager\4" and to change the value "AUTD" that appears in "(default)" for "3G".
Now we have to add two values in the register in order that on having clic in the CommManager on the option of 3G, it should change GSM to 3G:
You should accede to the key of the register "\HKLM\Software\OEM\UMTS" and to add the following values (DWORD):
"PrefDomain" value decimal "2"
"PrefRAT" value decimal "1"
Bye and good luck !
Sento
PD: I apologise for my english
ok guys, there is an easy way to do this as AllTheWay stated earlier. Simply use Advanced Config V3.3
Go to Menu (right soft key) > More Settings > Comm Manager and then simply choose which settings you want
See attached screenshot
sento74 said:
Hi!
In order that it works 3G in CommManager it is necessary to add a few values in the register.
I detail the steps, if you want to do it.
To enable 3G I have replaced it with Direct Push option, because I do not use her, but it can be for any different.
First we change the option "Direct Push" for "3G":
You should accede to the key of the register "\HKLM\Software\HTC\CommManager\4" and to change the value "AUTD" that appears in "(default)" for "3G".
Now we have to add two values in the register in order that on having clic in the CommManager on the option of 3G, it should change GSM to 3G:
You should accede to the key of the register "\HKLM\Software\OEM\UMTS" and to add the following values (DWORD):
"PrefDomain" value decimal "2"
"PrefRAT" value decimal "1"
Bye and good luck !
Sento
PD: I apologise for my english
Click to expand...
Click to collapse
Hi sento74!!
Thank you for your suggestion.. It do exactly what you say and i hate install a utility only to do a mod.. i like do by myself if is possible ..just the case!
Nice One
Regards