updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
danrw84 said:
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
Click to expand...
Click to collapse
Does wifi turn on? (Does the left LED blink like it does when wifi is turned on?)
If not, then it could be related to a cingular cab - did you install any of the cabs from the original cingular extended rom?
left led does blink.
ive also gotten as far as picking up a network.
i have tried everything, i cannot get my wifi to work at all. i dont know whats up.
the settings i needed (which i replicated for the new rom) on the old rom, was this
I would select networks, MY work network, this connects to the internet.
then in the WLAN adapter i had to manual enter my dns servers.
thats pretty much it to get it to work, but now with this rom it wont
Similar or different problem? Not sure. PARTLY SOLVED!
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
Click to expand...
Click to collapse
Hi NG,
I updated my O2 XDA mini s (German) from OS 1.3.4.2 to 2.16.9.1. (Radio 02.07.10 included). To be honest, I was never really happy with the quality and reliabilty of the radio. 4 out of 5 times it did work, but once in a while, especially while roaming, it gave me a headache. After unlocking and updating to the new version, WLAN looks to be working quite well, at least for connecting to access points, but it seems that it can't browse external websites. VXutils give back a socket error trying to access external (outside my home network) websites/Email.
Internal (inside my home network) connections work like a charm. Termincal Services client accesses my Win2003 Server no problem and I can also connect to a website hosted on my internal server. (http://servername:port).
Whenever I try to connect to external sources, the browser stops afer not successfully "locating" the respective server. On the other hand locating might not be the problem. Performing a ping to an external site with VXutils properly picks up the right ip address but cannot send/receive ping!
GPRS works as supposed. Can connect to sites with no problem.
May be somebody experiences the same problem or, even better, has a solution.
By the way I used @Work for all possible settings. The work profile is set up for both connection types.
Besides that, the new rom is really nice
EDIT Well after some time playing around, I have solved the problem or better the problem partly disapeared. In 'Settings' 'Network Adapters' I switched from Use server-assigned IP address to manual and entered IP, DNS, Gateway, etc. With these settings it everything worked after a soft-reset. Going back to DHCP and soft-reset, it first worked an now it doesn't anymore. At least there is a work around and I'm trying now some other things. All machines currently work with the DHCP settings correct. I will check and keep you updated if the problems comes from Server settings or from something in the PDA EDIT
Lars
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
did you change your Wizard to 802.11g. I found that once I did that, the card stopped working.. the setting was 4, but when i changed it to 8 it stopped worked..
it was some registry key. 802dotg or something ..
sorry i cant rember excatly.
did you change your Wizard to 802.11g. I found that once I did that, the card stopped working.. the setting was 4, but when i changed it to 8 it stopped worked..
it was some registry key. 802dotg or something ..
sorry i cant rember excatly.[/quote]
Darn it. I did. I'll re-wipe and not load the 54g upgrade. Thx.
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
Did you by chance install anything from the cingular extended ROM after you installed the imate ROM?
no i didnt load anything
but i want this wifi to work! what the heck!!
try this
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
Danrw. Concerning the registry settings, after patching the os I did change the registry settings. One already existed with the right value as shown in the 802.11g thread. The other one, DotG, I added.
After that, it did pick up a only G router!
As far as setting DNS manually. It is not enough to just cange the dns setting. You have to enter all the information and even after a soft-reset it takes some time to have the settings picked up... Use vxUTIL 'Info'-Screen to check the current settings. I did test wlan before and after applying packages from the extended rom. No change on reliability or performance on WLAN IMHO.
As far as I understand. Your problem is actually connecting to the router/Access Point. For testing please disable all security on your router and do a soft-reset before trying to access. Also since we have heard of several problems with model 9100 not realizing if an access point is available or not. Also change the SSID of your router and if possible the MAC Address of the router.
Don't forget to soft-reset and first try SDIO Adapter inyour pda with auto IP/DNS/etc. settings.
Another thought. Embarassing, but once I messed around with trying to get a new pda online and forgot to disable the mac filter settings in the router, which resulted in being able to see the active router but it didn't let me connect. After those two days I was missing a lot of hair.
Good luck
Lars
summiter said:
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
Did you by chance install anything from the cingular extended ROM after you installed the imate ROM?
Click to expand...
Click to collapse
I did but only the minimum. I trimmed down their install to the basics. I narrowed it down to one of two CABs. Either the gprsstall or EnableEONS. I didn't install either of those and I"m now back up and running. Of course, I still can't get it to prefer WiFi to EDGE.
I had experienced the same problem with home wifi network after upgrading my rom. I saw in my laptop that the key was set to 2. I went to the network cards, clicked on my wifi network, and under Network Key swithed the value from 1 to 2. I can now connect to my wifi network at home.
eb said:
I had experienced the same problem with home wifi network after upgrading my rom. I saw in my laptop that the key was set to 2. I went to the network cards, clicked on my wifi network, and under Network Key swithed the value from 1 to 2. I can now connect to my wifi network at home.
Click to expand...
Click to collapse
I had same problem after upgrading mda pro with new imate rom 1.30. Can you provide step-by-step tutorial please?I use d-link DSL-G604T wifi router; can connect to home network but when try to surf the web from ppc it always connect through gprs; no access if phone is off.Where can I find Network Key to switch?Any set-up on ppc?
Thanks
I had same problem after upgrading mda pro with new imate rom 1.30. Can you provide step-by-step tutorial please?I use d-link DSL-G604T wifi router; can connect to home network but when try to surf the web from ppc it always connect through gprs; no access if phone is off.Where can I find Network Key to switch?Any set-up on ppc?
Thanks[/quote]
I do not know if my solution will work for you because I upgraded my rom to 2.16 but lets give it a try. I use d-link DI-524 wifi router. Start menu > Settings > Connections (tab) > Network Cards [I must admit earlier today when I was trying to connect my k-jam to the wifi, I did get as far as it asking me for my authentication code and afterwards it timed-out] --> select your wifi network [at this moment as I'm trying this out my wifi on my k-jam is off] --> Network Key (tab) > it was the key index that I had to change from 1 to 2. Before doing this though, go to your router's wireless configuration page through your webbrowser and make sure the keyX (it looks for d-link this can be from key1 to key4 or at least on mine) and make sure the key index you select on your mda is the same number that is used on your router for code authentication.
Also I noticed after resetting my k-jam that I could get connected to my wifi but I could not surf, in wifi setting on my k-jam I had to hit renew ip and then I was able to surf.
I hope this works for you. Good luck and many late nights.
no luck with this for me
even tried removing wep all together. tried multiple routers.
i can detect the ssid's, but i cant connect to them. times out on the connect.
Mine worked no problem...you may already have had this suggestion but here was my process.
Unlocked with lokwiz
Upgraded
Reset before extended ROM apps installed
Installed total commander
deleted extended ROM
Upgraded again
i re-installed the CINGULAR ROM and WiFi works like a charm
......any clues?
Here's what I ended up finding out for mine. First, at the time I wrote this, I was running the 2.16 ROM. Now I'm running the 2.17, but the fix is the same with either.
Don't load the cingular add-ins GPRSSTALL or EONS. I narrowed it down to those two that were causing the issue. So, the only ones I install now are CingularMMSAccount, EdgeIcon, TimeStyle, WiFiRate4, and SmartDialingEnable. Thats it, and its all I've seen to be necessary from Cingular's little bundle 'o fun. Everything else I haven't found interferes with my ability to use the phone at all.
Hope this helps...
kristiandg said:
Here's what I ended up finding out for mine. First, at the time I wrote this, I was running the 2.16 ROM. Now I'm running the 2.17, but the fix is the same with either.
Don't load the cingular add-ins GPRSSTALL or EONS. I narrowed it down to those two that were causing the issue. So, the only ones I install now are CingularMMSAccount, EdgeIcon, TimeStyle, WiFiRate4, and SmartDialingEnable. Thats it, and its all I've seen to be necessary from Cingular's little bundle 'o fun. Everything else I haven't found interferes with my ability to use the phone at all.
Hope this helps...
Click to expand...
Click to collapse
What does timestyle and wifirate4 do? I don't have these installed and haven't seen any problems.
I've been having a bugger of a time with the Wi-Fi on my 8525. I keep getting a response that the WEP key is incorrect. I was able to connect once, and have since deleted my settings that the Wi-Fi network, but nothing I'm trying seems to get me connected.
Any ideas?
Thanks!
I had a problem with my Wifi working when I first got the phone. But since I wanted to SuperCid the phone I had to downgrade the IPL to do so. I re flashed to the same Cingular 1.34 with IPL 1.06. Since then I have not had any problems with the Wifi.
stsanford said:
I've been having a bugger of a time with the Wi-Fi on my 8525. I keep getting a response that the WEP key is incorrect. I was able to connect once, and have since deleted my settings that the Wi-Fi network, but nothing I'm trying seems to get me connected.
Any ideas?
Thanks!
Click to expand...
Click to collapse
Here's a thought. Why not try the Hitchhiker application. It tends to get round quite a few issues in set up. Also once you've got it working and connected to Wifi you can close it down if you wan to and you'll find it has saved correct settings for your normal way of connecting to wifi. Another benefit is that you can cut the wep key from a text document and paste it into the box it gives you (saves a lot of hassle whenever you need to re-enter the key - which in my case is 28 letters digits long!!) WM5 box as you may have discovered does not allow wep pasting!!
You need to have .netframework installed as well byt the link I give you also has a link for that as well:
http://www.kasuei.com/hitchhiker/
Mike
i recently got att 8525 but i havent able to connect wifi with my home network. it asks for wep key, then shows connecting to network and after a while shows wrong network key...no success so far...i even tried the abive hitchhiker sf and all but no luck...has anyone come up with any solution??? i had np connecting 8125 b4...!!!
btw i use wm5 and the most recent att rom update posted on htc site...
hoping for some solution...
I have similar problem too with my cingular 8525. I unlock it to work with t-mobile and also upgrade to wm6 . Now, I can not connect to my home wlan. If I click on wlan, it show my wireless network. But if I click on internet explorer, it show me the default internet window explorer with at & t and window mobile icons. when I click on either one, it take me to media net log in screen. help me
ok, i dont know how but my wifi started working last night!!! b4 it always looked for IP address and eventually disconnects b4 connecting to home network. so i installed "hitchhiker" but no luck either...so i uninstalled and then tried but this time it said connected to network and as soon as i open IE, it disconnects...it looked like wifi connects but then disconnects or timeout due to power settings, so i changed power settings under wifi settings to best performance and now it just connects right away...
--
ellisos020 said:
Just wanted to let everyone know that switching from "best battery" to "best performance" also solved the "incorrect network key" error for me. Thanks Chakli!
Click to expand...
Click to collapse
Thank You Thank you Thank You. I've been at this for a few days now. It would have to be that simple.
Just remember you need to run the remove proxy cab file if proxy is has been set to use GPRS/WAP. Also make sure the right network interface is selected - like work uses 802.11 etc..
After many hours tinkering around with my i770 I cannot get it to tether with my laptop for the world. I would like to use ICS (Internet Connection Sharing) in order to tether, and at first just use USB. At a later point I might use wifirouter, but I'm first focused on getting the USB to work. So I grabbed the .cab and installed fine onto the device. When I run it, there is a dropdown box with "Network Connection:", but there is no options to select, regardless if my broadband connect (#777) is connected or not. I looked through the registry a little bit, but couldn't find any subdirectory for connection sharing, or any significant values to change. All other threads I've read say there is no other adjustments required, just to install the missing cab, run, and connect. I've also tried using PDAnet to no avail, it gave me a standard issue connection failed error, can't remember verbatim what it was at the time though, would have to go back and look.
Any idea's?
Hi, I wonder if someone can help me with this problem. I recently got a Shift X9501 from China, it is already liberated with WM6 working (it has Start menu, internet explorer, USB Tools, etc.). However, the only thing I couldn't find is the Internect sharing application. It doesn't show up in the Start -> Programs folder nor can I find it in the Windows folder. I was testing the 3G connection on the Shift using my iPhone SIM card, and it only worked on the WinMo side not the Vista side. I called HTC and AT&T customer services and was told that it was because my SIM card won't allow desktop Windows to use the 3G service. So I'm guessing my only solution is to use the Internet Sharing. Please, anyone could give me a hand on this? Thx!!
Internet sharing is possible. There is nothing that you need to do or run on the WM side.
Internet sharing can only be done from the Windows side as wifi and bluetooth is only accessible there, for connection to your external device, e.g. laptop or iphone.
Check this thread for instruction on internet sharing.
http://forum.xda-developers.com/showthread.php?t=488872&highlight=sharing
If it doesn't work then you may need to check your windows services to check that the internet sharing service is enabled.
Then it should work.
Hi Flanimal, thanks for the reply. But I don't think that's what I am meaning. From what I learned from the forum and other sources, I think the original Shift should come with an application called internet sharing in Snapvue even without liberation, and it can share the 3G connection from Snapvue to Vista. The application is also a standard one for WM6. I was wondering since mine is of model X9501 and it's already liberated when I got it. I doubt is it possible that the liberation deleted that function? Please help if you have any idea, a great many thanks!
I got a partial solution here by myself, and am writing it here in case anyone has similar problem. I tried to download an application named ICS Control 0.21, and copied the required IPNat.dll to the windows directory, and it turned out this way won't work as it told me loading the NAT driver failed. Then I tried to copy the IntShrUI.exe and intshare.dll to the windows directory (which are official WM6 files downloaded from somewhere else in this forum), and they also didn't work, and when I run the internet sharing application (IntShrUI.exe), it prompted that the connection could not be established with unknown reason. I then tried to backup my ROM and flash with a new one from the forum, and I failed and the SnapVue was dead. Then I found a tread in the forum telling me how to hard reset the SnapVue, and restored to the original state when I got the Shift. I thought it was really the original state, but this time the IntShrUI.exe worked! Vista is now connected with SnapVue and used it as an internet connection (later I did some registry work and the problem occured again, which forced me to hard reset my Shift again). However, the problem is that the connection is still restricted to local access only. I would guess that this is still my SIM card's fault, since it is for iPhone, and both AT&T and HTC people believed it won't work for desktop windows like Vista. I'm about to give up further exploring on this, and maybe I'll get a SIM card for laptop to have a try. Still, if anyone has any good solution for this, please reply to this thread. Any help will be appreciated.