Hallo,
I'm searching for a ROM with Manila 3D. I've used the Search-Function but there was only the Touch-It-ROM and it was very buggy on my Polaris and not very stable, too. Is there any other ROM with TF3D avaible?
I've just found ROMs with Manila2D but there are not many animations like Manila 3D.
Greats
mutant92
German:
Hallo,
Ich suche ein ROM mit Manila 3D. Ich habe die Suchfunktion schen benutzt, aber ich habe nur das Touch-It ROM gefunden welches TF3D enthält, und dies lief relativ fehlerhaft auch meinem Polaris. Gibt es sonst noch ein ROM mit TF3D? Es wäre schön, wenn es auch einigermaßen stabil laufen würde ;-)
Bisher fand ich hier nur ROMs mit Manila2D und da sind nicht die schönen Animationen, die es bei Manila 3D gibt (Uhr, Fotos, etc..)
no
German:
Nein ..... so lang die 3d treiber nicht richtig laufen wirds nichts. reicht dir touchflo 2d nicht aus ?
Hallo,
in Manila 2D there aren't the animations. I think the clock and the flipping pictures are cool
German:
Hallo,
ich find die Uhr beispielsweise viel besser (das Umblättern) und die ganzen anderen Animationen, die man so hat Die 3D-Treiber laufen bei mir recht gut..
Ich habe auch soeben eine Cab gefunden, und installiert. Es funktioniert auch, nur stimmt der Text überall nicht. Da ist immer ein INS_... oder sowas?!
TF3D does not work properly on our devices due to issues between TF3D and the 3d drivers that were developed by members of this forum.
cr1960 said:
TF3D does not work properly on our devices due to issues between TF3D and the 3d drivers that were developed by members of this forum.
Click to expand...
Click to collapse
its not just TF3D but all Opengl 3D applications...TF3D is just always on screen so you notice it...
pcarvalho said:
its not just TF3D but all Opengl 3D applications...TF3D is just always on screen so you notice it...
Click to expand...
Click to collapse
But is it possible to TF3D run in polaris?
psycho46 said:
But is it possible to TF3D run in polaris?
Click to expand...
Click to collapse
yes - but not without issues. read this: http://forum.xda-developers.com/showthread.php?t=465507
it's for Kaiser but the same works for Polaris.
I've installed TF3D (cab) with all the Plugins on my Polaris (HTC Official ROM) and it's very beautiful
But I can't turn off my Display. Is there a way to fix it?
mutant92 said:
But I can't turn off my Display. Is there a way to fix it?
Click to expand...
Click to collapse
Hey did you check this - http://forum.xda-developers.com/showthread.php?t=460621
Hi,
thx for this tipp! I've installed it now, but the problem isn't solved. When I push the Power-Button the backlight turns off, but my Polaris don't go into Standby-Mode. How can I fix this?
mutant92 said:
Hi,
thx for this tipp! I've installed it now, but the problem isn't solved. When I push the Power-Button the backlight turns off, but my Polaris don't go into Standby-Mode. How can I fix this?
Click to expand...
Click to collapse
you can't fix it - that's the point and why we use M2D instead of TF3D.
ah okay. This is really a pity that we can't solve this (little) problem. Is there still someone who is employed to get running TF3D on QVGA Phones like Polaris etc. ??
Theroretical it must run, doesn't it?
(Sorry for my englisch, I'm from Germany )
mutant92 said:
ah okay. This is really a pity that we can't solve this (little) problem. Is there still someone who is employed to get running TF3D on QVGA Phones like Polaris etc. ??
Theroretical it must run, doesn't it?
(Sorry for my englisch, I'm from Germany )
Click to expand...
Click to collapse
You can read all about the 3d driver project here: http://forum.xda-developers.com/showthread.php?t=426314
And your English is much better than my German
mines works fine, i push the power button, the screen dims, then goes dark leaving it in standby mode until i press the power button again and im using pdacorner rom v19 with 3d installed perfectly
fiyaburnz said:
mines works fine, i push the power button, the screen dims, then goes dark leaving it in standby mode until i press the power button again and im using pdacorner rom v19 with 3d installed perfectly
Click to expand...
Click to collapse
Can you post the site of this rom please??? The one that i found is for Kaiser...Thanks
cr1960 said:
...
And your English is much better than my German
Click to expand...
Click to collapse
That's good
Thanks for your posts
@fiyaburnz: Could I have a link for download please?
What have you installed ? which files ?
thx
B
mutant92 said:
I've installed TF3D (cab) with all the Plugins on my Polaris (HTC Official ROM) and it's very beautiful
But I can't turn off my Display. Is there a way to fix it?
Click to expand...
Click to collapse
ähm... I've downloaded it here.
I've founded this link in Forum for Kaiser.
But were can I download the Rom from PDACorner (V19 TF3d Polaris) ???
Thank you....!!!
B
mutant92 said:
ähm... I've downloaded it here.
I've founded this link in Forum for Kaiser.
But were can I download the Rom from PDACorner (V19 TF3d Polaris) ???
Click to expand...
Click to collapse
You can post here, when it works on your polaris
Related
Is there any newer Version of the Camera Software than 3.00 (Build 22764)?
Greetings MrMmmkay
Sorry das ich Deutsch schreib, mein Englisch is net so gut, will grad eh nur die Deutschsprachigen anschreiben ^^.
Kann mal bitte jemand der das aktuelle deutsche AKU 3.3 von t-mobile drauf hat gucken was er für ne Version der Kamera Software hat? und falls die neuer als 3.00 (Build22764) ist mal die camera.exe aus dem Windows verzeichnis hochladen?
Danke!
Gruß MrMmmkay
I have Camera v.3.0 build 22844
Oh, good to know that there are still new versions ^^.
Can you please load up the camera.exe in your windows directory here?
Greets
here you go,let me know if it works or you need some .dll's
Thanks!
If there are any newer Version out there, please load it up here ;-)
Greets
EDIT: Works fine, looking now for any improvements
Nobody out there with German AKU3.3?
Thank you very much.
unapproachable2kx said:
here you go,let me know if it works or you need some .dll's
Click to expand...
Click to collapse
thanks a lot
The Camera-Build of the German AKU3.3 is 25626!
I've added a complete OEM-Package with the German MUI-File.
Now hello people, I simply opens sometimes nen new subject, because I really in despair am. So I begin at the beginning sometimes. I wanted to me how I have already written in the other Tread, the m amine 2.0 flashen. If this has also acted like in the instructions described. So HrdSPL has folded everything. Only when I wanted then Rome Flashen, nothing has happened and I had my normal O2 Rome on it again. Then ahbe I the shaking it tries out where I had then the problem which I had no more receipt what I wanted to repair by another radio Rome. If everything has used, however, nothing. Now I have downloaded to me \ " 3LIT3 \ " IV Rome. everything is also quite good so far, only everything is there, unfortunately, on in English and I have Tom Tom 7 where my old maps do not go any more. When I now tried ahe, over again the m amine 2.0 to flashen, came he to 100% and then went out. . it came fehlermeldung image \ " corruptet \ " is and on the orbit 2 then the boat screen with the SPL 2.20 and on the right odebn RUUNBH. wars came.... Now I know really nciht more what I should do .... everything an O2 Rome tries to flaschen also miss. I hope somebody can help me here as fast as possible. Thank you schonmal in prerau. Now Olli Having tries sometimes the M.Amine Lite to flaschen, however, WWE. There everything claps funny enough
Hi 'oliver12685'
Nice Post ! But the problem is can not understand one bit of it .. though you tried hard ..
Hy,
sorry for my BAD english! it´s not so good.
can i write this in German??
oliver12685 said:
Hy, can i write this in German??
Click to expand...
Click to collapse
Well, I don't know German, probably you can write in German and try to give an English translation, and hope for any German friends on the forum to help.
Hi, I´m from Germany, but I don't understand your problem in English
German:
Hi, Ich bin Deutsch, aber kann dein Problem leider nicht auf Englisch verstehen. Schreib es bitte auf Deutsch und Englisch.
Ok I Try it in english
ok, now on my Handy I have the "3LIT3_VI_Full" Rom from this Forum.
The Problem is, its now in english.
I would the M.Amine 2.0 Rom in German, But its dosn´t work.
when i flash the Hard SPL its all fine. But when I Flash the M.Amine Rom it get to 100 % and than there comes an Error.
After a Restart comes the Reboot Screen . in the right corner is "RUUNBH" .
Why it dosn´t work?? Hard SPL 2.20 is flased.
So, I hope you understand me now
You needn't to re-Hard-SPL. When it's flashes once time, you needn't to do it a second time.
Have you tried it by another ROM? Is there the same problem?
German:
Du musst Hard-SPL nicht flashen, wenn du es schon einmal gemacht hast, des seit denn du hast den originalen Bootloader wieder geflasht.
Hast du es schon einmal mit einem anderen ROM versucht? Also kein M-Amine oder 3LIT3? Tritt da dasselbe Problem auf?
mutant92 said:
You needn't to re-Hard-SPL. When it's flashes once time, you needn't to do it a second time.
Have you tried it by another ROM? Is there the same problem?
German:
Du musst Hard-SPL nicht flashen, wenn du es schon einmal gemacht hast, des seit denn du hast den originalen Bootloader wieder geflasht.
Hast du es schon einmal mit einem anderen ROM versucht? Also kein M-Amine oder 3LIT3? Tritt da dasselbe Problem auf?
Click to expand...
Click to collapse
Das ist ja das Koriose, ich habe das Light M-Amine Rom WWE geflasht und da ging alles einwandfrei. und vorher hatte ich Bepe´s Rom. Da hatte ich das Problem, das ich so gut wie keinen empfang mehr hatte.
I have tryed the M-Amine Lite WWE Rom and its worked fine. But the Full Rom doesn´t work
Hast du Skype ?
English:
Do you have Skype?
Hi,
How are your flashing? And what is the error at 100%. Check the corresponding error code in the readme.doc from OEM. If you are flashing using SD card, better run from Win-XP (preferably). Do a Hard Reset, connect to ActiveSync and run the RUU at 'align screen'. Good Luck . !
mutant92 said:
Hast du Skype ?
Click to expand...
Click to collapse
Ja ich habe skype.
Could I get your Skype-Name (PM?!) please to help you?
German:
Kannst du mir bitte deinen Skype-Namen geben, damit ich dir besser helfen kann?
mutant92 said:
Could I get your Skype-Name (PM?!) please to help you?
Click to expand...
Click to collapse
At last there a German hand holding another. Enjoy ..
I think it's your Radio-Version that make problems. To solve the problem flash this
sorry for my poor english!!!
i have the same problem.
i have download an original rom : RUU_Polaris_HTC_WWE_1.25.405.1_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
on xda
and install it.
after i sucessfull intall the amine in french...
It can be your Radio! Please look at the Link given in this Thread, there you can download the Radio and your problem should be solved
Good Luck!
Hey guys,
could somebody post the cab for the panel manager which is used originally on itjes Touch It 4.5?
I installed the new panel manager but i have problem with it.
kann man den neuen panel manager einfach drüber installieren?...oder muss man den erstmal entfernen(und das geht ja net ^^ muss ja in die rom gekocht werden)
You can simply install the new one.
Deutsch:
Du kannst den neuen einfach drüber installieren. Nur weg kriegst du ihn dann nicht mehr wie ich feststellen musste ^^
Check here, post #54
http://forum.xda-developers.com/showthread.php?t=494026&page=6
Thank you. I feel the Panel Manager which is usen in the Touch it ROM looks diffrent from the one which is used in the original ROM. There are no icons for settings and changing view. And the vibration is missing and the panel icons are smaller. Do somebody know where I can find the cab of the panel manager from original ROM?
No idea .. I could give it to you .. yesterday .. but today I already have the new one .. and I don't see why I'd go back, since this one is like 100 times faster.
R3A rom looks really promising !
Where did you download the new Panel Manager?
Both new camera and panel manager files:
http://rapidshare.com/files/213857684/Camera-PanelM.rar.html
Copy them to program files (you may have to use a file explorer to do that).
vector4agn said:
Both new camera and panel manager files:
http://rapidshare.com/files/213857684/Camera-PanelM.rar.html
Copy them to program files (you may have to use a file explorer to do that).
Click to expand...
Click to collapse
The link don't work, please reply new link..
X4B4R4S said:
The link don't work, please reply new link..
Click to expand...
Click to collapse
http://www.filefactory.com/file/af761ed/n/Camera-PanelM_rar
after upgrading my charmer to the version 6.5. the camera is not function anymore. has someone an idea how I can solve this problem?
Thanks a lot
pumukel
habari00 said:
after upgrading my charmer to the version 6.5. the camera is not function anymore. has someone an idea how I can solve this problem?
Thanks a lot
pumukel
Click to expand...
Click to collapse
Hi!
I answered in your other thread.Please don't make more threads for the same issue.
BR
Scootie
bei mir ging die Cam auch nicht mehr
Nach etlichen Flashversuchen mit verschiedenen Roms bin ich bei einem 6.5er Rom vom HTC Prophet hängen geblieben.
Ein Rom vom Prophet auf dem Charmer. Komischerweise läuft das und auch die Cam geht
Never recommend that!!!
On 90% of the Charmers the Prophet ROMs don't even boot and I never saw a Prophet ROM with working Camera on Charmer. The picture is always upside down.
thx too much sir
benefit for all
Hello,
Im a user from Germany and my English is notso good, but I hope you can help me.
My Problem: I have a ACer BeTouch E200. After installing a ROM Udate (acer orgininal) I can only see on my display: Download incomplete: WM HEX. Wath could I do? I hope you can help me. Thanks
try to flesh it agan if you still can !
I dont come in the bootloader
so I really don't know..anyway at the worst if you can't get anything bring it to acer assistance, it seems that it's not your fault, you should be cover by warranty ! try to ask brainmaster is deutch too maybe he can help, at least with languages !
okay, now on my display please wait... I think im in the bootloader? but i need a ROM
niemzi said:
okay, now on my display please wait... I think im in the bootloader? but i need a ROM
Click to expand...
Click to collapse
I found a ROM but only in English: Download.
Thanks for your help, but i have started the bootloader yesterday and today i see the same words at the display: please wait...
personally i think i must send the device to acer.
Maybe, you have a idea? Could I install a ROM over the MicroSD card?
niemzi said:
Thanks for your help, but i have started the bootloader yesterday and today i see the same words at the display: please wait...
personally i think i must send the device to acer.
Maybe, you have a idea? Could I install a ROM over the MicroSD card?
Click to expand...
Click to collapse
You can´t flash ROM over the MicroSD Card. I think that there is nothing you can do - so you need to send it to Acer.
Hi schick mir mal ne deine Mail per PN ich schau morgen mal ob ich dir ne Anleitung schicken kann damit du uns das E200 nicht schicken musst.
MfG
chris
ShadowK10 said:
Hi schick mir mal ne deine Mail per PN ich schau morgen mal ob ich dir ne Anleitung schicken kann damit du uns das E200 nicht schicken musst.
MfG
chris
Click to expand...
Click to collapse
Kommst du von Acer Service?
Ja , werde aber keine Geheimnisse ausplaudern
Bin auch nur hier weil ich eigentlich überzeugter HTC user bin und die MODs für das S200 total genial finde.
Gefällt Ihr auch mein Modulares ROM?
Restoring acer e200 not using ActiveSync, thanks to emulator WM PC
Russian manual http://acer-club.ru/-t3975.html
thanks Russian men nowaym, slav375, DeadMan
Good luck
wo kriegt man eigentlich ein deutsches ROM her?