hi to all !
i recently got a German O2 XDA Neo and it's now 2 days i cannot get it synced with any pc... pls someone help, cause i'm desperate because of German OS (sry, i don't speak it well) and a whole bunch of contacts on my pc...
for the first time i tried to sync it with Windows Mobile Device Center on my desktop pc with Vista. but no luck, even then I opened all needed ports in windows firewall. no luck with getting it synchronized after soft or hard reset, restated my pc for a 1000 time and still no connection. when i tryed it on my brothers Win XP laptop with active sync 4.1 german (what was with the pda in a box) and with 4.5 active sync, again all needed TCP UTP ports open and restarted everything and tried every USB port around. still nothing ...
when changed USB cord and still no luck.
what can it be? can Neo's Mini USB slot just stop working?? or is it software issue? perhaps there is a way to flash it with other firmware from SD card?
please help, i'm all out of ideas ...
my friend try read this post it solve my similar problem there are a program call USBKILLER that helps you http://forum.xda-developers.com/showthread.php?p=1554592#post1554592
thanks , i've already managed to get my pda hotsynked on one very old pc . but i'll try tomorrow your solution on my desktop .
thanks!
still no luck .
does anyone had issues with connecting their XDA to Vista? please share your experience !
hello i lost my usb connection from my tilt 8925 it was working fine then it stoped cant sync my phone to my pc try reloading active sync and still is dead my sync dont read the phone or my pc.please help me fix this i have tried researching and my next step was asking all of yous for help.if all and all i have to call htc or at&t ut with having all the up grades to my phone woundering if they could help me.so please reply back with some help on how to fix this thanks..
Does the pc attempt to connect? Do you receive any error messages? Please give more information.
looking for help
no there is no connection at all. i hook up my phone using the usb cable and i reinstalled my sync software and nothing happens i get a message that usb device is not working please check and try again im woundering if when i extracted a file i might have extracted a program that i needed to make this work im not sure what i could have done....please reply back if you could help would really be nice.....thank you hope you have a answer for me............
hi everybody
i installed nataly rom but after that i cant connect diamond with pc with activesync. i try everything but result is nothing. so i cant installed new rom or application. what i have to do solve this problem. i try to format but not solving. pls help me
does your diamond recognise your pc when u connect it? does the usb2pc box pop up? if so try reinstalling active sync or wmdc
Hello guys,
I have a problem. My p3300 does not connect through Active Sync.
Its everything oright, and with my S200its orght.
The rom is not the original, is a WM 6.1
Is possible that exist some sort of problem with that rom that doesnt connect with the pc, or is the phone USB port (it charges, but don't comunicate).
How can i change the rom, without been with active sync?
I have a SD 2gb card, but i can't make a partition on it, and make a SD Flash. :S
Can anyone help me?
Thanks
de-install activesync
download and install the latest version of active sync
make sure that on the conncetions tab the USB connection is tabbed
goodluck
Hey there, and thanks,
I have already make that, and still nothing.
Reinstall the A.S. 4.5, soft reset the pda, and reconnect, restart the pc and still nothiing. :S with my S200(prophet) don't have any problem. :S
More help required :S
tnx
I have the same problem i cant sincronize the pda whith the activesync and i wish to change the rom. Now it's in france and i wish to change it to english, and it's locked to orange france i think. What can i make? It starts in bootloader, but the instalation from the card is not starting. thankx
le. and if i want to install something gives error 260
hm. well to get back at you thinking it might could be your rom, i dont think so.
did u test the usb cable?
did u test it on another pc?
...
quick question...
does it charge?
(i know sounds daft..but...)
or have trouble charging sometimes?
it could be the pins not connecting properly on the device to usb..
*______
/ . == . I
look at device, turn it upside down, now look at the charge slot on device..
Imagine the little picture iv drawn is the charge slot on the device..
''.'' are the ''pins'' on the device..
get a pin and sprize/pull them out SLIGHTLY..
the ''pins'' are hard to see but this could be the problem..
* my p3300 stopped charging, activesync, the lot.. this is MY quick fix!
(hopefull yours too!)
lol
vrumvrum said:
Is possible that exist some sort of problem with that rom that doesnt connect with the pc, or is the phone USB port (it charges, but don't comunicate).
Click to expand...
Click to collapse
just give it a try.. i now know it charges tho.lol
Yes it charges, and i tryied another pda to connect to this pc and it works fine, i changed the mini usb connector, because it was broken
mvenneker said:
hm. well to get back at you thinking it might could be your rom, i dont think so.
did u test the usb cable?
did u test it on another pc?
Click to expand...
Click to collapse
Hello,
Yes, i tested with other pc (4 pcs in total), and the P3300(artemis) isn't recognize by Active sync, but it charges through the usb, but with my S200(prophet) don't have any kind of problem, and connect a Razr X (motorola) to test the cable to and keep working to, so the problem is in the phone.
I tried to clean the conector and all usb contacts still in place and working (have te 5 pins and they move up and down, normally)
in bootload mode it recognize by apearing in the bootom left the USB indication, but have the 260 error in everyway i try to connect the phone to pc.
any help?? :s
Thanks
...
try this out for now..... just try it...
* disconnect the device from pc..
* hard reset the device..
* reinstall active sync..
* turn pc off and then on again..
* reinstall active sync..
* turn pc off and then on again..
- when the pc has fully start up..
* connect device..
* i know you already said you have tried uninstalling activesync and reinstalling it but just try it again but this time reseting your pc once its uninstalled.
...
download this..
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/activesync-download.mspx
raving_nanza said:
try this out for now..... just try it...
* disconnect the device from pc..
* hard reset the device..
* reinstall active sync..
* turn pc off and then on again..
* reinstall active sync..
* turn pc off and then on again..
- when the pc has fully start up..
* connect device..
* i know you already said you have tried uninstalling activesync and reinstalling it but just try it again but this time reseting your pc once its uninstalled.
Click to expand...
Click to collapse
Hy there, i done it more than 5 or 10 times in the 2 home pc's. and nothing.. been the same.
raving_nanza said:
download this..
microsoft.com/windowsmobile/en-us/downloads/microsoft/activesync-download.mspx
Click to expand...
Click to collapse
Hi there,
I have already download the most recent version (AS 4.5), 3 times, and reeinstaled more than 5 ou 10 times, on the office pc, and home pc's.
It's still the same, no connection or syncronising :S
Don0t know more what to do.. :S
...
if that does not work, i dont know what it can be.. sorry mate, if i find out why its not connecting ill let you know..
Just an idea.
On your device (not on PC)
Go to Start->Settings->Connections->USB to PC and change the setting (tick or untick the extended network option)
BR
Scootie
scootie said:
Just an idea.
On your device (not on PC)
Go to Start->Settings->Connections->USB to PC and change the setting (tick or untick the extended network option)
BR
Scootie
Click to expand...
Click to collapse
done and nothing, it still the same.. :s
but thanx anyway
regards
Have you try Hard Reset ?
Hi,
My first post here and try to help !
Do you know how to hard reset your Artemis ? it has works for me one time with the same problem...
But you have to save ALL your data first and reinstall everything after...
(you will find in the forum if you don't know how to hard reset)
Good luck !
i don it a couple of times, with no sucess. :S
I tried to flash a new rom throught the SD Card, but with no sucess to..
i download several ones, and keep to tell that its a invalid certificate, and tried othr been from HTC, tht dont do anything, pass directly to the 3 color bar menu. nothintg more hapend.. :S
If it help.. :
Rom version Touch_AF pTG - WM6.1
radio version 02.94.90
OS: 4.1.0.7
IPL:3.13.0001
SPL.3.13.0000
Cheers
Wrong SPL I think...
It help ! But I think it's not a good news...
It seems that you haven't CID unlock your device before flashing a new ROM... but you need to have a good working active sync connection to do it !
see : artemis USPL in the forum or artemisUSPL_nosize (i cant' post url)
(with the second one you can flash any ROM size without any problem)
Maybe if you find a way to do it with SDCARD, you will be able to flash a new ROM, but maybe you have a hardware failure...
Castorlama said:
It help ! But I think it's not a good news...
It seems that you haven't CID unlock your device before flashing a new ROM... but you need to have a good working active sync connection to do it !
see : artemis USPL in the forum or artemisUSPL_nosize (i cant' post url)
(with the second one you can flash any ROM size without any problem)
Maybe if you find a way to do it with SDCARD, you will be able to flash a new ROM, but maybe you have a hardware failure...
Click to expand...
Click to collapse
Hi,
but theres my problem.. i dont have a working A.S. connection between the phone ad the pc. :s
most probably is the rom that don't communicate with the computer, because it charge, so the usb is ok. :s
ill try through Blue ttooth to syncro the Uspl, and then try to change the rom through sdflash.. i'll pray to God to this work..