Hi there.
I spotted something REALLY awkward today while trying to handle this problem with my service provider, where i keep getting PIN: PENDING, with Blackberry connect.
My provider finally asked me to give him my IMEI number so he can follow up on the matter. I gave him my IMEI number, not paying much attention as i was doing so, directly from the Blackberry Connect app's output. An hour later he calls me back to confirm the number, because it is invalid...
So i checked it out.
In Blackberry Connect, under Identity tab, it read out my IMEI number 2 digits short.
Can anybody confirm or deny that this is just a graphic glitch that the screen isn't wide enough to show the whole number, or is the app actually misreading the IMEI?
If the latter is in fact true, i think i finally coined why Pharos doesn't wanna connect Blackberry properly.
Your responses are highly appreciated.
PS: You can find your full IMEI under Settings --> System --> Device Information --> Identity.
oh crap... Im not paying attention at all!
Seems my device is reporting its own IMEI wrong... as 17 digits instead of 15...
So.. i checked the sticker under the battery on my device, and the last digits, 01, shouldnt be there.
How can i remove em? I think this may be the reason Blackberry isnt working?
Related
Hi all
I was wondering if anyone knew the answer to the above question.
to explain a bit better:
If i change the IMEI on my XDA it will obviously show up on the phone. What i want to know is will the network see the new of old IMEI. Ie whis is sent out by the phone.
Also:
From that i have found out the new service which blocks off stolen phones work that runs in the UK work by the IMEI code of the phone.
How do i make sure i don't change my IMEI to a number that is registered as stolen and in turn block my phone off.
Also again:
If at a later stage my phone does get blocked will changing it back to the original IMEI unblock it?
After all this i'm wondering if i should bother changing the IMEI. Although it would be nice to have my DOB there.
Oops I think I posted this in the rwong place!!
To Adminstrators:
Sorry
If it is in the wrong place could you move it?
The IMEI is stored in two places: one is displayed, the other is used to send to the network. The Manipulator changes both locations. The chance you'll change your IMEI to one of a stolen phone is small, very small. (It's six digits if you exclude the manufacturer part, so the chance is definitely bigger than getting hit by a meteorite, but still)
We included the IMEI change bit because:
a) We could
b) Privacy concerns: we'd like to live in a world where people can have multiple identities that are hard to connect, even if their opponents happen to run the country / telco.
WOW!!
Thanks for the great answer. As soon as it is possible to change my imei and unblock my phone i'll be doing it. (I have version 4.20 so it don't work yet).
Does anyone know of a web site where it list all the imei that are recognised as stolen or a number i can call in the UK to find out. The local police are useless and don't know anything.
A number to report a stolen phone would be useful as well cos my little sis got her knicked.
I have T-Moble here in the US and updated my Pocket PC Phone edition rom versio 4.00.16 ENG and noticed they have this call barring feature in the phone settings that lets you bar incoming or aout going calls but to activate you have to enter a call barring password does anyone know what it is.
i never used or tried it, but i was told its the last 4 digits of your social securty # or last 4 of your fone #
I tried both abd it didnt work but thanks for the info
I always thought call barring was done through the sim/service provider password.
T-Mobile also uses 1234 as a default password often.
also try 5678
Thanks again people i will try thpse suggestions today
Where did you find a 4.00.xx update for Tmobile? I just checked their site and they still had the old Nov 2002 3.16 code up there.
Thanks,
If you look at the ROM Update section of this forum you will see we have easy access to various 4.00.xx ROM updates.
SIM PIN 1 & 2
Ok, I had an experience earlier this year where one of my t-mobile phones (not the PPC) wanted "Sim Pin 2" to access a feature. I ended up getting my sim pin blocked and called up t-mo support. After a little bit of "Try to get the information out of the dumb support person" I finally had the person ask me "Well, I could give you PUK1 and PUK2, if you think that would help", I said i thought it might, and she gave me the two keys to the kingdom (Along with what SIM PIN 2 was originally, just a random string of number). The moral: Call T-Mobile, tell them you have a feature that you can't unlock and that you think you've screwed up your phone bigtime. If they ask if you want to send it in, say no, that you think you can fix the problem if they give you these weird PUK numbers or PIN numbers. They'll probably just be happy to get you off the phone, and these might be the numbers you're looking for.
Tmobile has a special plan called the "data-only" plan that automatically blocks all incoming or outgoing calls. However, it still allows emergency dialing (911) and 611 calls... Just call a rep and have them set you up with that plan! Everything costs the same...
My provider, Fido, offers a service where the name of the caller and telephone number show up. It's called name display. Unfortunately, on the hermes, the name does not show up. I only get the telephone number.
I have used another phone with this service and the service works.
I have been through several roms and they all give the same result. Any clues to what could be going on?
bump bump77
I never knew there was this funtionality from the provider......
Always thought there was a conversion on the phone when there comes a call in. Number recognition is we'll known, name send with the provider I have never heard off.....
Hope someone has an answer for you!
http://www.fido.ca/portal/en/support/namedisplay.shtml#q01
"What is Name Display?
It's a unique service exclusively offered by Fido and Rogers that lets you see on your handset display a caller's NAME and phone number from Fido, Rogers Wireless and landline callers across the nation, even if it isn't entered in your phone book. So you'll always know who's calling you. "
dying to find a solution
I have Hermes from Rogers. I have name display and of course stop working after upgrading to WM6.
just to prevent duplication, please read what I've done so far at the following link:
http://forum.xda-developers.com/showpost.php?p=3078617&postcount=9
I don't have enought info or experience. Can anybody help? Work together or direction whatever...
This cannot be impossible. I don't think HTC developed a driver only for Rogers.
The sticker and box say one thing, but the IMEI on the handset is different.
All I have ever done to the phone was soft/hard (I forget which) SPL so that I could flash WinMo 6.5 following the instructions on the wiki, and everything has been fine since I did this back in May/June time.
Now I have decided to unlock it as I am on O2 with an iPhone, and thought I would use my HD as a backup phone, so I bought a credit on HTCCode.com after seeing several success stories, and it failed on the login with the software. No big concerns just yet, I emailed him the details to sort it, however as I was typing out the IMEI from the box, I thought to double check on the handset, and discovered they are different.
Is this something likely to have been changed by the SPL thing when I flashed it?
I assume I can get it unlocked via the IMEI which is currently on the handset, but I am concerned that this is not the correct one.
Any help?
TIA
ive seen other threads for other devices where ppl have claimed flashing hardspl has changed there imei number ..... just use the one ur fone reports and nt the one on the box .... no big deal
Yeah I realise it works and it's not a problem, but it may look a little bit dodgy if I choose to sell it.
The unlock worked fine anyway, just seems a little odd that the IMEI is so easy to change on these handsets. I thought it was supposed to be almost impossible.
Oh well.
You've probably looked at your phone's system properties to see what it says the IMEI number is. You can also dial *#06# on your phone's key pad. When the final # is entered, a 15-digit number will appear. This is a free call regardless of whether you have a SIM card installed.
As long as you're not doing anything illegal, you should be okay. Within the past couple of days, I read something about crooks changing IMEI numbers mostly with stolen phones but also to evade the law.
I registered my new Blackstone Clone with T-Mobile today on their prepaid plan. I asked them what IMEI number they showed and the operator said she not disclose the number but could confirm it if I, the phone's owner, gave it to her. When I dialed in *#06# (I was on a land line) on the Clone, she confirmed the IMEI when I gave it to her.
Select type, mobile. Ok, that works.
Select sub type, Galaxy Tab. Right, done.
Ok, next 2 boxes don't appear as there's no submodels to the Tab.
Fill in rest of the data, hit submit and...
Must fill in those fields that if I select Galaxy Tab, don't have anything in.
Np, will pretend it's a phone to get the serial number in, and...
No go. It knows the Imei is for a Tab.
Bit of a blunder releasing the device and you can't register. No problem, I'll just submit a... oh. I need to be registered... doh!
Yes, I've been trying to register for the last 2 days, its bothering me. What about a phone call?
Ditto, I'm mainly stuck at the serial number part. There is no serial number anywhere on this unit. I tried entering the MEID but that wouldn't take.
Also they don't have my specific model number all mine has on the unit and the box is SCHI800BKV but the site has two versions with an A and an L in the model number.
I was able to register 2 days ago. I was having the same issues before.
I think for the sub category, pick GTab again instead of TMobile Gtab, etc.
After that I was able to pick the other drop downs.
Having the same issue the Samsung customer service employee told me I needed to wait 2 days for what IDK
What you need to do is select 'Cell phone' istead of galaxy tab, and then enter the IMEI number in the serial number box. May take a bit of fighting with it, but it worked for me.
Nope, i think it's only taking IMEIs (GSM equipment), not ESNs (CDMA Equipment)...
I found the serial number in the "about phone" section - status. It lists the IMEI and the serial number. Had to trouble registering my Tab without the serial number at first.
MizGarfield said:
I found the serial number in the "about phone" section - status. It lists the IMEI and the serial number. Had to trouble registering my Tab without the serial number at first.
Click to expand...
Click to collapse
Your equipment is GSM, i believe. CDMA equipment doesnt show a s/n under settings ~~> about phone ~~> status. Our equipment only show ESN #s in Dec and Hex.
XCellPhoneSalesRep said:
Your equipment is GSM, i believe. CDMA equipment doesnt show a s/n under settings ~~> about phone ~~> status. Our equipment only show ESN #s in Dec and Hex.
Click to expand...
Click to collapse
This is ridiculous!
How do you have a registration page that only caters to one type of device? Not only that...when you try to register over the phone, no one can help you either!!!
So Not Kewl!
Do everything as you are supposed to on the page, selecting "Galaxy Tab." Then put in the Hex version of the IMEI starting after the first two characters, "0x" in my case. For example, your Hex IMEI code will look something like:
0xA1234567899ASA
but only put in:
A1234567899ASA
and it will fill in the greyed out boxes for you.
beestee said:
Do everything as you are supposed to on the page, selecting "Galaxy Tab." Then put in the Hex version of the IMEI starting after the first two characters, "0x" in my case. For example, your Hex IMEI code will look something like:
0xA1234567899ASA
but only put in:
A1234567899ASA
and it will fill in the greyed out boxes for you.
Click to expand...
Click to collapse
i assume you mean "put in the HEX version of the ESN," not of the IMEI.
Anyway, still doesn't register for me
I can't register my at&t tab! It says invalid imei, serial number. Little help please!
Sent from my Galaxy Tab using XDA App
Managed to get registered last night in the end, silly faffy todo. Perhaps this should be done automatically when you buy it at the store
XCellPhoneSalesRep said:
i assume you mean "put in the HEX version of the ESN," not of the IMEI.
Anyway, still doesn't register for me
Click to expand...
Click to collapse
Yes, MEID accessed through settings->about device->status->MEID.
My model is a verizon. Not sure if that would make any difference.
Using the HEX worked for me.
Sprint.
Has anyone with an AT&T Tab been able to register? This is highly frustrating!!
No luck wit at&t tab. Can't get my $50.
Sent from my Galaxy Tab using XDA App
I called a half hour ago and they said "We are still updating our data base with serial numbers and imei numbers." Please try again in 24 hours. I said ok but its been 24 hours since I originally tried. Then he said try again in another 48 hours. i said wait you just told me to wait 24. and then he said yes 24 hours.
they don't know what's going on.
hybred-nexus said:
I called a half hour ago and they said "We are still updating our data base with serial numbers and imei numbers." Please try again in 24 hours. I said ok but its been 24 hours since I originally tried. Then he said try again in another 48 hours. i said wait you just told me to wait 24. and then he said yes 24 hours.
they don't know what's going on.
Click to expand...
Click to collapse
Which brand Tablet do you have?
I don't get a serial or IMEI error, I get an error about the sub-category fields not being populated.
It's like the form isn't checking my AT&T IMEI number.