Yeah, got burned on ebay with some cheap a** styli, and now Im looking where to buy the original ones that come with the phone... any ideas?
I bought mine from MSG Digital:
http://www.msgdigital.com/productdetail.asp?productid=46813
Note, these are the HTC stylus for the HTC Touch Pro, not the Fuze, so they come with the matte black tip instead of the glossy black. But they are exactly the same, unscrew with the magnetic weight inside.
BBowermaster said:
I bought mine from MSG Digital:
http://www.msgdigital.com/productdetail.asp?productid=46813
Note, these are the HTC stylus for the HTC Touch Pro, not the Fuze, so they come with the matte black tip instead of the glossy black. But they are exactly the same, unscrew with the magnetic weight inside.
Click to expand...
Click to collapse
Do they fit perfectly on the Fuze, as the original did? I dont care about the color but I do care about the fitting.... I want them to look just like the originals one that my Fuze had.
Yes, the are exactly the same. The reason for the difference is the Fuze's back is the glossy one, while the original HTC Touch Pro has a rubber like backing, so these styluses are a matte black to match the rubber backing. Otherwise, they are the exact same weight/look.
Edit: posted some pictures. The last shows how its a different finish, but fits perfectly in the phone. (Phone has invisishield applied, so it has some dust/lint)
I use this site. http://cnn.cn/shop/
How 'bout the HTC accessorystore
http://www.htcaccessorystore.com/uk/p_htc.aspx
I got a spare stylus with my fuze.
Check your box, you should have a spare.
theomni said:
I got a spare stylus with my fuze.
Check your box, you should have a spare.
Click to expand...
Click to collapse
Lost both of them already... got a spare one from a friend of mine! But Im still looking for the OEM ones... will check the link to HTC accesory store that was posted.
Droga said:
Lost both of them already... got a spare one from a friend of mine! But Im still looking for the OEM ones... will check the link to HTC accesory store that was posted.
Click to expand...
Click to collapse
I have four of them (got extra stuff through warranty, and att let me keep all the duplicates ). If you want one, I could send you one in an envelope for $5
I've dealt with these folks from Canada ... here's the USA link:
Expansys
http://www.expansys.com/p.aspx?i=169458
Related
Hi, I'm looking for a silicon protection for my kaiser. Yesterday I drop my kaiser for my first time... It has 3 horrible body scratches now... the smooth surface is anything but scrached protected...
I'm now looking for some kind of protection. My first idea was to get a silicon protector, like those used for ipods... But I have not been able to find any....
Does any of you own one of those?
Any recomendation?
http://shop.brando.com.hk/prod_detail.php?prod_id=02247&dept_id=039&cat_id=0763
Thanks for the info!!!
Are u using one of those? Are u still able to use the HTC holder (The one included in the original HTC TyTN 2 box)?
Have u buy any other product from that website?
thanks !!!!!
I am not using it for the TyTNII, but had one for the P3600. Have ordered many products from that site.....no problems whatsoever. Still think Brando screen protectors are amongst the best you can find.
Has anyone seen a similar silicone case but with a plastic screen protector like that for the wizard?
- TKN
How the Brando works if we slide and tile the screen? Anyone can post a pic for this?
they sell it on ebay for $10 shipped
Hi,i've bought one for my trinity and it was very effective.So i command one ( Brando ) for my Kaiser.I've received it today and it's really a bad product,the protection fall all the time.So i continue to use my trinity silicon case.So don't buy this !
I've got one off eBay, maybe fake who knows, but it suffers exactly as Marcdu81 says. Its rubbish, falls off all of the time, on the Artimes, I used a silicon protector in cunjunction with a slip case, and was hoping to repeat that with the kaiser. Looks like the Seido super thin case is the only way, at ~£30 to the UK. I only paid £80 + contract for the kaiser so £30 is a lot for a case. I'll carry on hunting for a good and cheap case.
DO NOT BUY THAT!!!
It's a piece of junk just like everyone said. The best protection currently for this device is the Seidio rubberized case. I know it's pricey, but it's well worth it.
Trust me, I tried the cheap way and got that piece of crap from ebay. Do like I did and bite the bullet. You can get the Seidio rubberized case for a few bucks cheaper on ebay.
http://cgi.ebay.com/724-Seidio-Rubb...ryZ20337QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Actually, once you get the Seidio case, the crappy silicone case fits much better when you use both at the same time.
do they sell the Seidio rubberized case without the hole for the second camera in the front? my tilt doesnt have the second camera.
gotdibz said:
do they sell the Seidio rubberized case without the hole for the second camera in the front? my tilt doesnt have the second camera.
Click to expand...
Click to collapse
Unfortunately, they don't... Yet. They say they MIGHT in the future but I wouldn't hold my breath. Believe me, the beauty of this case makes up for the useless hole.
Is this the one you guys are saying is crap? >>>http://www.buy.com/retail/product.asp?sku=207883654&listingid=21964170&dcaid=17902
This is the one i have and it fits like a globe.
you can find it on ebay onder this name: Seidio Rubberized Case HTC Tilt 8925/Kaiser/TyTN 2
or go to tiltsite.com and seach for seidio brand
mobits said:
Is this the one you guys are saying is crap? >>>http://www.buy.com/retail/product.asp?sku=207883654&listingid=21964170&dcaid=17902
Click to expand...
Click to collapse
Yes that's the one they're saying is rubbish. I ordered one too and the thing just will not stay on. I hate it when the rubber falls off
elypsar said:
Yes that's the one they're saying is rubbish. I ordered one too and the thing just will not stay on. I hate it when the rubber falls off
Click to expand...
Click to collapse
THAT'S WHAT SHE SAID! HAHAHAHAHAHAHAHAHAHAHAHA
But Anyway I have to second or third the notion about the Seido Rubberized Case. It stays on the Phone SO well and you can slide a tilt with ease. It's so awesome.
Thanks guys, I'm going to bite the bullet and get the Seidio rubberized case then. Hopefully there won't be problems with this rubber falling off!
mobits said:
Thanks guys, I'm going to bite the bullet and get the Seidio rubberized case then. Hopefully there won't be problems with this rubber falling off!
Click to expand...
Click to collapse
and... i'll pay US$10 for such a case on ebay or some other B2C website...not very cheap...
I've been looking and I want A Seidio innocase but they're not in production yet.So are there any good ones yet?
Daikazetatsu said:
I've been looking and I want A Seidio innocase but they're not in production yet.So are there any good ones yet?
Click to expand...
Click to collapse
Just turned in my Diamond for a Pro and have ordered a Krusell leather belt clip case for it. Had one on my Diamond and it was very good. Another is the Noreve cases. Both very good quality. Prefer a case to a skin.
Pouch from PDair
I have ordered and still waiting. It takes about 2 weeks to reach Malaysia as what they mentioned.
http://www.pdair.com/catalog/index.php?cPath=10100000_900000_11000489
By skin I Meant those rubber or silicone one.Not the graphic kind
vyap said:
I have ordered and still waiting. It takes about 2 weeks to reach Malaysia as what they mentioned.
http://www.pdair.com/catalog/index.php?cPath=10100000_900000_11000489
Click to expand...
Click to collapse
Which model did you order? How much bulk does it add to? Would like to order to be send to M'sia. let me know how long it takes when you get the case.
willbeh said:
Which model did you order? How much bulk does it add to? Would like to order to be send to M'sia. let me know how long it takes when you get the case.
Click to expand...
Click to collapse
Leather Case for HTC Touch Pro - Flip Type (Black)
Car Mount for PDair Leather Case
Both items at USD40, No additional charges as what been mentioned.
Will provide additional info when I get both items.
Proporta Alu-Leather Case - Flip Type : Link
Proporta Maya Case : Link
HTC Pouch S280 : Link
HTC Pouch S322 : Link
PDair Leather Case for : Link
Beyzacases UniSR VS1 Leather Case : Link
Pielframa : Link
CarryMobile : Link
PDAir : Link
Krussel : Krusell HTC Touch Pro
vyap said:
I have ordered and still waiting. It takes about 2 weeks to reach Malaysia as what they mentioned.
http://www.pdair.com/catalog/index.php?cPath=10100000_900000_11000489
Click to expand...
Click to collapse
I believe what you ordered is branded Monaco
http://www.wirelessground.com/htctouchpro.html
http://www.touchdepot.com/monaco-book-type-leather-case/4A22A3889.htm
both have the product. Let me know how well it works, I really want to get one.
($24USD from wirelessground)
Careful!!!!!
Guys, be careful with those flip leather bags!
I'm having really bad experience with this one. It has a sheet of protective foil (0.5 mm thick) over the keyboard, so when the screen is closed, this foil is pushing the screen away from the keyboard.
One week of using this crap bag and now I can actually pull the screen away from the keyboard 1mm or so (left side in closed position). And when I shake the closed phone holding the keyboard, i can see and hear the screen flapping.
Apparently the hinges are not stable enough to resist any objects between them. I don't see a way of tightening them up myself. (Although I'm pretty do-it-myself guy, don't feel like taking this thing apart without instructions).
So I'm just getting myself an aluminium case, at least it won't get worse, 'cause the screen and keyboard are allways fixed against each other.
And I strongly recommend you consider whether you want to ruin an expensive unit with a cheap bag.
I add this one. It's a high quality leather case.
A little bit expansive but i'm so glad to have it, it's really good.
I really want this case, but does anyone know of a side case that exposes the miniusb, so I can plug in my headphones
Kraize92 said:
I really want this case, but does anyone know of a side case that exposes the miniusb, so I can plug in my headphones
Click to expand...
Click to collapse
Cut it out, if they dont make them that way DIY
xboxhaxorz said:
DIY
Click to expand...
Click to collapse
I'm trying to. No idea how. Just cut open the leather?
slimeSickle said:
Guys, be careful with those flip leather bags!
I'm having really bad experience with this one. It has a sheet of protective foil (0.5 mm thick) over the keyboard, so when the screen is closed, this foil is pushing the screen away from the keyboard.
One week of using this crap bag and now I can actually pull the screen away from the keyboard 1mm or so (left side in closed position). And when I shake the closed phone holding the keyboard, i can see and hear the screen flapping.
Apparently the hinges are not stable enough to resist any objects between them. I don't see a way of tightening them up myself. (Although I'm pretty do-it-myself guy, don't feel like taking this thing apart without instructions).
So I'm just getting myself an aluminium case, at least it won't get worse, 'cause the screen and keyboard are allways fixed against each other.
And I strongly recommend you consider whether you want to ruin an expensive unit with a cheap bag.
Click to expand...
Click to collapse
Agreed, I personaly refused to use that type of case after seeing another touch pro flapping after it got taken out its case. Mines thankfully has never been in such case and is still like new. Avoid may well be the best advise. However it does limit what you can pick though. I use the HTC sleve, and then put that in my mini s belt case. A bit bulky, but until a good solution comes about, it'll have to do.
I too use the sleeve that comes with it but my problem is when I keep it in my pocket , sometimes when I receive a call , it answers on its own , very irritating
leigo said:
I believe what you ordered is branded Monaco
http://www.wirelessground.com/htctouchpro.html
http://www.touchdepot.com/monaco-book-type-leather-case/4A22A3889.htm
both have the product. Let me know how well it works, I really want to get one.
($24USD from wirelessground)
Click to expand...
Click to collapse
I received both items yesterday (31.10.08). Very nice and i like it.
3 dollars cheaper then the one's from PDAir (Aluminium case). Regular price 39,95 Fall sale my ass
Technocel case at Sprint
Just got Touch Pro and new case from Sprint - rubberized and textured (like my Seidio case) - I LOVE It for $25 retail...ask for a discount on ur accesories!!!
willgagnon said:
Just got Touch Pro and new case from Sprint - rubberized and textured (like my Seidio case) - I LOVE It for $25 retail...ask for a discount on ur accesories!!!
Click to expand...
Click to collapse
did u order it from online .. my local store has nothing ...
http://nextelonline.nextel.com/NASA...ryID=ZCH6855R&topPageNumber=0&subPageNumber=0
i only see this one online.. leather coated .. not rubber and the lady stated that the clip looks like this :
http://nextelonline.nextel.com/NASA...yID=CBU2380_C&topPageNumber=0&subPageNumber=0
is this the one u have ... do u havea link on where to purchase it .. what disconnect did they offer u
hey, i'm lookin for a leather pouch type case w/ no belt clip like the one that comes with the european version of the touch pro. I would really like to have the soft cloth inside to clean the screen as well, any suggestions?
i have the sprint touch pro
Are there any non glossy rubberized replacement back cover for the touch pro? I hate the current one...
My Touch Pro has a rubberized non-glossy back out of the box. Not yours?
I'd like a replacement back that is fully flat, without the "diamond" facets though.
Mine has a fully flat back, from o2 UK. I think Vodafone UK has a Diamond style angluar back, though.
Aar0n said:
Mine has a fully flat back, from o2 UK. I think Vodafone UK has a Diamond style angluar back, though.
Click to expand...
Click to collapse
I'd love the flat back like the O2 one but apparently they're not interchangeable, there are other differences in the case.
Here's one thing you could try to hold ya over till the rubber back comes out. What I did was to take car wax and wax the back of my Fuze. It's still a finger print magnate but it is not as noticeable and cleans easier. Also, for some reason it is not as slippery and grips a little better.
It's a fuze. Will the original touch pro back cover fit on it?
Ayle said:
It's a fuze. Will the original touch pro back cover fit on it?
Click to expand...
Click to collapse
If you compare the pics here, you'll see that the sides of the case are different. So I doubt it'll fit.
I got my Fuze a couple of weeks ago but the glossy black panel on the back is already showing scratches. I would like to know if anybody knows a place where they sell replacements or if they make a rubberized one or not. I just ordered a case so it won't be much of an issue but I'm sure I'll need to replace it eventually. Any info on this would be greatly appreciated.
To anyone reading this thread and wondering, see this thread:
http://forum.xda-developers.com/showthread.php?t=444619
Yea I saw that but does that rubberized one fit this phone because it doesn't look like it from the picture and the clear plastic part where the camera/LED is located on the phone seems to small to fit over both on the Fuze. Just want confirmation that this cover fits on the Fuze. Thanks for the input.
MAN i really hope they come out with some aftermarket understated back covers. If the sprint version didnt have the ugly chrome trim id be all over it.
Couldn't agree more. I'd buy a "Tilt" like back cover for the AT&T Fuze in a heartbeat.
thedogger said:
Couldn't agree more. I'd buy a "Tilt" like back cover for the AT&T Fuze in a heartbeat.
Click to expand...
Click to collapse
Was Fuze's back some sort cheesy homage to the Touch Diamond?
dpittman said:
Was Fuze's back some sort cheesy homage to the Touch Diamond?
Click to expand...
Click to collapse
http://www.wmexperts.com/articleimages/2008/11/fuze/att-fuze-13.jpg
Fingerprint magnet & slides all over the place if you set it down on something & try to use it.
Guys I'm looking for a good screen protector for my new Magic...don't want to open it without adding one. Any suggestions? I guess you guys must have bought a few good ones...Kindly help out..
maneck35 said:
Guys I'm looking for a good screen protector for my new Magic...don't want to open it without adding one. Any suggestions? I guess you guys must have bought a few good ones...Kindly help out..
Click to expand...
Click to collapse
find a protector for the iphone, cut it a little with a scissor and it sould be it
I have a Brando Ultraclear in the mail. I have used those for all my devices since the S/E K750i. Their fit is not always 100% but they do the job well
http://brando.com.hk/bw-ultraclear-pda-s-p-htc-magic-_p03408c1060d039.html
cagra said:
I have a Brando Ultraclear in the mail. I have used those for all my devices since the S/E K750i. Their fit is not always 100% but they do the job well
http://brando.com.hk/bw-ultraclear-pda-s-p-htc-magic-_p03408c1060d039.html
Click to expand...
Click to collapse
well, the screen is different than normal touch phones.. uses the same mechanism as the iphone were it registeres the electricity in your finger's instead of the actual pressure.. thats why it needs to be some kind of speciel protector.. so my guess is that one that works on the iphone would work on the magic
I got this from Amazon:
http://www.amazon.co.uk/exec/obidos/ASIN/B0028E7HMU/ref=ox_ya_oh_product
and its REALLY great: perfect fit, bubble free, absolutely transparent
I like the Invisible Shield full body skin. Unfortunately they haven't made on for the Magic yet, BUT they have made it for the G1 and you can either get the full body or just the screen. Now I am assuming the screen on the G1 and the Magic are the same so if you just want the screen protection, go for that one.
http://www.zagg.com/invisibleshield/t-mobile-g1-cases-screen-protectors-covers-skins-shields.php
good news
"
The product you submitted to our Hot Gadget Team has been created an is now listed on our website. You can find it using the link below:
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
"
ostendk said:
well, the screen is different than normal touch phones.. uses the same mechanism as the iphone were it registeres the electricity in your finger's instead of the actual pressure.. thats why it needs to be some kind of speciel protector.. so my guess is that one that works on the iphone would work on the magic
Click to expand...
Click to collapse
they also use that one for iPhones, so I assume it works
dju said:
good news
"
The product you submitted to our Hot Gadget Team has been created an is now listed on our website. You can find it using the link below:
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
"
Click to expand...
Click to collapse
Thanks. Ordered mine, it's backordered. Anyone who orders you can use the coupon code PROTECT20 to get 20% off.
Awesome, thanks for the promocode.
excellent. thank you for the promo code.
TheStrider said:
Thanks. Ordered mine, it's backordered. Anyone who orders you can use the coupon code PROTECT20 to get 20% off.
Click to expand...
Click to collapse
thanks but... Doh! Too late for me
ive installed invisbile skin on ipod touch before and are there like places where water can get in when applying the skin onto the magic?
I must say that the InvisibleShield is rather a sh*t product. I bought the full body kit and was not happy at all. It was not cut properly and what even worse looked cheap on my phone. I removed all of the parts but screen and back panel. After 2 weeks the back panel went yellow and all the edges lost the glue making it fold outside. What even worse is that on the description it says that all the micro bubles will disappear in time. Well they do not. Oh one more thing, while mounting it on your phone you will have to wet it all with some kind spray they provide and leave it for like 24h to let it dry. DUDE THAT IS THE WORST THING THAT EVER HAPPENED TO ME.
got mine from ebay user dcmugen. i got the matte finish one and it of the same quality as all other screen protectors. the matte one has this grainy look to it though but all of them have that as well so no deal breaker there.
http://www.dcmugen.com/
you can check the various different screen protectors there. plus he has videos of what they all look like. has privacy glass, mirror finish, matte finish, regular gloss and whatever else there.
My t-mo phone came with one, I would imagine that they sell them in the stores as well?
ya i didnt like the one that came with the mytouch. way too greasy and fingerprint magnet. aftermarket ones are much better imo
I tried a screen protector I got off eBay, there are heaps of Chinese dudes selling them for a few bucks plus postage.
I didn't like it, it made the touch screen less responsive and imprecise. I ended up taking it off.