Database Users

Case Round-Up

I decided to round up all of the cases for the HTC Universal for reference:
Piel Frama (1 case... also available on Expansys as the "Chairmans Case")
- http://www.pielframa.com/imate_jasjar.htm
PDair (2 cases, both with belt clips)
- http://www.mobilefun.co.uk/product/7749.htm
- http://www.pdair.com/scripts/main/viewitem.php?itemid=1998&pdaid=190
XaX (2 cases)
- http://www.expansys-usa.com/product.asp?code=125516
- http://www.expansys-usa.com/product.asp?code=125869
- Nutshell
http://www.tuff-as-nuts.com/209-210.html#
I have ordered the XaX cases with the intention of sending one back... I will post a full analysis with lots of pics.... it's sad that there are not a lot of pics around of these two !

BTW, here's a nice review of the Proporta case...
http://www.clieuk.co.uk/execbookcase.htm

Thanks for the summary - very useful indeed. I'm looking for something like the Piel Frama or Xax (2) case but the keyboard must NOT be covered - which I believe it is with both of these, although it is hard to tell from the photos.

I have found another case by Krusell which looks quite good:
http://www.krusell.se/product.php?s=2&product=2095
Sold here:
http://www.expansys.com/product.asp?code=127398&asource=119353
Anyone got one?

Mods:
Should this be in accessories ?
Sorry...

@page 3:
Wow... the Krusell one looks pretty good !
Hole for ear... belt clip... window for screen... Hmmmmm.... !
The only thing its missing is elastic stretchy sides to block the SD card from falling out while still being able to open the case.

case
i like the krussel or the xax #1.
am interested in feedback on the xax, as I really just want something simple to make the carrying of it easier. if I need it, i just want to take it out of the case entirely, then when finished put it back. most cases are designed to keep it inside the case. i think the clam design prevents the need for a protective permanent case, so something to make it easier to carry it would be handy.
But yes, the krussel looks good if I felt it needed protection...
So any feedback on the Xax 1 would be good, and if any body does by the krussel, let us know.

Re: case
simon_darley said:
...any feedback on the Xax 1 would be good...
Click to expand...
Click to collapse
I've had the XAX 1 for about a week now and it's just what I was looking for. Like you, Simon, I was also interested in just something to carry the Universal as I prefer to take it out completely to use it. The XAX 1 certainly does the job.
The magnetic closures make it very easy to take it out of the case and put it away. The fit is not too tight to make it difficult to remove and replace but tight enough to feel secure. It's not going anywhere. And it may seem a small thing, but I also like that the magnets make the removal and replacement of the Universal into a silent operation without zipping or velcro or snaps to announce what you're doing. It's not a big deal, but it was a nice little bonus.
The concern I had with this case was the belt clip since it is an actual clip and not anything that locks in place. My previous "belt" cases with other PDAs had the locking type clips. This one just hooks on to the belt, but it feels very secure. There seems to be no question of it slipping off of a belt and I've even used it just hooked on to jeans (without them falling down, despite the Universal's weight!) when not wearing a belt. I can see where there is more of a chance that it could come unhooked when just on jeans like that, but I haven't had that happen yet.
One advantage to the locking clips was the ability to allow the case to swivel which this one does not have. After using it though, I like the horizontal orientation and now prefer that it doesn't swivel actually. I don't have to take the case off or swivel it around every time I sit down.
I'm planning to eventually get the PDAir (most likely) for times when I want the Universal protected even while in use, but I would only use that in certain environments where I was worried that it might get damaged if taken out completely. Most of the time I plan to use the Xax.

I am not sure I get how the Xax 1 works.
Is it like a holtster, where you just slide the JasJar in?
What is the magnetic closure for, is that a tab that closes over the top opening?
How are the sides protected?
Care to post some pictures?

I'm at work, so I can't post any pictures right now (they probably wouldn't be all that happy that I was positng in the first place, but hey, it's lunch!)
It is like a holster and the JJ just slides in. As you suspected there is a leather tab that goes over the top to help protect and hold it in (though the fit is tight enough that I don't think holding the JJ in is really all that necessary.) It doesn't go completely across the top, but leaves room on one end so that you can use the headphone jack while it's in the case (as long as you put the JJ in it with the camera facing out.) Beyond that, the top is protected. There is leather on both sides, so they are protected as well. On the bottom, there's a large cut out in the middle that allows you to push up on the JJ to take it out more easily as well as two other small cut outs for the speakers.
I'll try to see if I can get some pics together later tonight.

Hi everyone,
I got the XaX #2 case today (the magnetic snap one, NOT the belt clip) and well... it's not that great.
First of all, the Jasjar won't fully close when it's inside... the leather strip that holds down the keyboard gets in the way of the screen. I've tried a bunch of different positions, and no dice.
Also, the camera hole is uncovered, but the earpiece is not so you can't use the phone when the case is closed.
The magnetic snap is nice and strong though, and the leather is of good quality.
However, in terms of functionality, it's not that great. I'll post pics later.

ikaris said:
...the Jasjar won't fully close when it's inside...
Click to expand...
Click to collapse
So I guess XaX may have a hit and a miss with their two cases. Thanks for passing that along because I think that is a concern.
I've wondered if the Piel Frama case will have the same "closing" issue. In some of the pictures on their website it looked like the JJ may not have been all the way closed. I had one of their cases for a Dell Axim 5 and it was of very high quality but the "closing" question concerns me.
I'd love to hear from anyone who gets a Piel Frama.

Same here. I am interested in the Piel Frama case or the Krusell. Both look pretty nice and seem to have the proper cut outs for all buttons and such. Just wondering which one seems to fit the device better.

I am currently using the case that came with the iPaq 5500 series. This fits the XDA Exec perfectly and is ideal if you want to use the case for storing the Exec and taking it out of the case for use.
Simon

kelford said:
So I guess XaX may have a hit and a miss with their two cases. Thanks for passing that along because I think that is a concern.
I've wondered if the Piel Frama case will have the same "closing" issue. In some of the pictures on their website it looked like the JJ may not have been all the way closed. I had one of their cases for a Dell Axim 5 and it was of very high quality but the "closing" question concerns me.
I'd love to hear from anyone who gets a Piel Frama.
Click to expand...
Click to collapse
I have received my Pielframa case a couple of days ago. The Pielframa does not have a closing issue. Also it fits perfectly. Besides that it does not use a plastic 'pouch'. That is terrible. I owned a Qtek 9090 which the case also had a plastic 'pouch' to cover the keyboard. It is a dust collector. My keyboard got very dirty and I could not get the stain away. Luckily Pielframa did not use this design.

simba said:
I have received my Pielframa case a couple of days ago. The Pielframa does not have a closing issue. Also it fits perfectly. Besides that it does not use a plastic 'pouch'. That is terrible. I owned a Qtek 9090 which the case also had a plastic 'pouch' to cover the keyboard. It is a dust collector. My keyboard got very dirty and I could not get the stain away. Luckily Pielframa did not use this design.
Click to expand...
Click to collapse
Just want to confirm 100% before ordering the Pielframa case - you are saying that the keyboard is NOT covered by any plastic? It isn't clear from the photo. Thanks.

simba said:
I have received my Pielframa case a couple of days ago. The Pielframa does not have a closing issue. Also it fits perfectly. Besides that it does not use a plastic 'pouch'. That is terrible. I owned a Qtek 9090 which the case also had a plastic 'pouch' to cover the keyboard. It is a dust collector. My keyboard got very dirty and I could not get the stain away. Luckily Pielframa did not use this design.
Click to expand...
Click to collapse
Thanks for giving an update! That's good news that the Piel Frama doesn't have the closing issues that was found with the XaX 2 case. I know how well PF cases are made, so I may have to get one of these (or at least put it on a gift wish list!) since I find I like to use different cases depending on circumstances.
How does it feel in terms of added bulk? It seems designed to be on the device most if not all of the time, so I wondered how it really feels when used every day?

Take a look at this one: http://www.mobilefun.co.uk/product/7866.htm
seems reasonalbly priced
One thing though..........
Click on larger image.
first pic you see is the belt clip side
click the next pic and where you would expect to see the closing flap thingy, you see a plain flat side!?!?
Am I missing something?

Codiac said:
Am I missing something?
Click to expand...
Click to collapse
I don't understand that either. Where did the flap go?
I'm supposed to be getting pictures together (having regular PC issues at home) so I can show the XaX 1 in use, but the general construction looks similar to the one in the link, but the XaX has a bigger flap. And it doesn't hide anywhere either!

page3 said:
Just want to confirm 100% before ordering the Pielframa case - you are saying that the keyboard is NOT covered by any plastic? It isn't clear from the photo. Thanks.
Click to expand...
Click to collapse
Yes, it is not covered by any plastic.
The case does make it feel more 'bulky'. In the daily usage you could leave the it in case without the need of taking it out. I can answer the phone by not having to open the case. Of course you do need to open it to be able to make a phone call.

Silicon Protection

Hi, I'm looking for a silicon protection for my kaiser. Yesterday I drop my kaiser for my first time... It has 3 horrible body scratches now... the smooth surface is anything but scrached protected...
I'm now looking for some kind of protection. My first idea was to get a silicon protector, like those used for ipods... But I have not been able to find any....
Does any of you own one of those?
Any recomendation?

http://shop.brando.com.hk/prod_detail.php?prod_id=02247&dept_id=039&cat_id=0763

Thanks for the info!!!
Are u using one of those? Are u still able to use the HTC holder (The one included in the original HTC TyTN 2 box)?
Have u buy any other product from that website?
thanks !!!!!

I am not using it for the TyTNII, but had one for the P3600. Have ordered many products from that site.....no problems whatsoever. Still think Brando screen protectors are amongst the best you can find.

Has anyone seen a similar silicone case but with a plastic screen protector like that for the wizard?
- TKN

How the Brando works if we slide and tile the screen? Anyone can post a pic for this?

they sell it on ebay for $10 shipped

Hi,i've bought one for my trinity and it was very effective.So i command one ( Brando ) for my Kaiser.I've received it today and it's really a bad product,the protection fall all the time.So i continue to use my trinity silicon case.So don't buy this !

I've got one off eBay, maybe fake who knows, but it suffers exactly as Marcdu81 says. Its rubbish, falls off all of the time, on the Artimes, I used a silicon protector in cunjunction with a slip case, and was hoping to repeat that with the kaiser. Looks like the Seido super thin case is the only way, at ~£30 to the UK. I only paid £80 + contract for the kaiser so £30 is a lot for a case. I'll carry on hunting for a good and cheap case.

DO NOT BUY THAT!!!
It's a piece of junk just like everyone said. The best protection currently for this device is the Seidio rubberized case. I know it's pricey, but it's well worth it.
Trust me, I tried the cheap way and got that piece of crap from ebay. Do like I did and bite the bullet. You can get the Seidio rubberized case for a few bucks cheaper on ebay.
http://cgi.ebay.com/724-Seidio-Rubb...ryZ20337QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Actually, once you get the Seidio case, the crappy silicone case fits much better when you use both at the same time.

do they sell the Seidio rubberized case without the hole for the second camera in the front? my tilt doesnt have the second camera.

gotdibz said:
do they sell the Seidio rubberized case without the hole for the second camera in the front? my tilt doesnt have the second camera.
Click to expand...
Click to collapse
Unfortunately, they don't... Yet. They say they MIGHT in the future but I wouldn't hold my breath. Believe me, the beauty of this case makes up for the useless hole.

Is this the one you guys are saying is crap? >>>http://www.buy.com/retail/product.asp?sku=207883654&listingid=21964170&dcaid=17902

This is the one i have and it fits like a globe.
you can find it on ebay onder this name: Seidio Rubberized Case HTC Tilt 8925/Kaiser/TyTN 2
or go to tiltsite.com and seach for seidio brand

mobits said:
Is this the one you guys are saying is crap? >>>http://www.buy.com/retail/product.asp?sku=207883654&listingid=21964170&dcaid=17902
Click to expand...
Click to collapse
Yes that's the one they're saying is rubbish. I ordered one too and the thing just will not stay on. I hate it when the rubber falls off

elypsar said:
Yes that's the one they're saying is rubbish. I ordered one too and the thing just will not stay on. I hate it when the rubber falls off
Click to expand...
Click to collapse
THAT'S WHAT SHE SAID! HAHAHAHAHAHAHAHAHAHAHAHA
But Anyway I have to second or third the notion about the Seido Rubberized Case. It stays on the Phone SO well and you can slide a tilt with ease. It's so awesome.

Thanks guys, I'm going to bite the bullet and get the Seidio rubberized case then. Hopefully there won't be problems with this rubber falling off!

mobits said:
Thanks guys, I'm going to bite the bullet and get the Seidio rubberized case then. Hopefully there won't be problems with this rubber falling off!
Click to expand...
Click to collapse
and... i'll pay US$10 for such a case on ebay or some other B2C website...not very cheap...

Another case thread...Slimmest Kaiser Case?

Well there seems to be a lot of views about the best cases out there, just wondered what the most 'pocket friendly' case was?
Don't care about the material as long as it isn't a sock or a stick-on option (ie an actual case)
Definitely no belt loop, preferably a very low profile clasp etc...
Basically just want something that is likely to stop it getting scratched up in a bag or if it was dropped, but don't need full armour!
Any good suggestions?

I've been looking for something pocket friendly as well... I'm almost ready to just get a thin sunglass pouch... currently I'm using a case for a Sprint Mogul, but it has a belt clip...

i use an ipod slip case, and have pulled off the belt clip, gives good protection to the screen,
going to order a leater slip case from www.pdair.com to see what thats like

I've got one of these - http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=6561
Doesn't add much to the size at all, and I keep mine in my pocket all the time.

Here is what I'm using, it comes in Black, Brown or Pink:
http://www.wirelessground.com/tiltflipblack.html
It covers the back and front very well, the cut outs are aligned very well, it has a slimmer form factor than the Krussel Orbit I normally use.
Here is the one my spouse uses, it comes in Black or White:
http://www.boxwave.com/products/dlsleeve/at_t-tilt-designio-leather-sleeve_2906.htm

I just ordered one of these yesterday. I will let you know how it is hopefully tomarrow or over the weekend.
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

SpeedRazr said:
I just ordered one of these yesterday. I will let you know how it is hopefully tomarrow or over the weekend.
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
i would be interested in your opinions and if you could confirm these points for me:
1) Can you still use the touch screen?
2) If the slide up and tilt works fine with the case on
3) The general quality and how bulky it is in a pocket
this looks perfect for me as i wanted a 2 piece armour case where i could still slide open the phone

scharnet said:
Here is what I'm using, it comes in Black, Brown or Pink:
http://www.wirelessground.com/tiltflipblack.html
It covers the back and front very well, the cut outs are aligned very well, it has a slimmer form factor than the Krussel Orbit I normally use.
Here is the one my spouse uses, it comes in Black or White:
http://www.boxwave.com/products/dlsleeve/at_t-tilt-designio-leather-sleeve_2906.htm
Click to expand...
Click to collapse
The "tiltflipblack" is made by PDair and is available for 1/2 that price. I've had one for several weeks and it still looks new, and I wear it every day. It's the perfect case for me.

The slimest most "pocketable" case I've found yet, is the formfitting Noreve case as seen here:
http://www.pocketpcfreak.com/archive/00006945.htm
It is also one of the very few - true - formfitting cases (using a laminated leather design, w/o the ugly and disturbing plasting cover over the KB. It protects the front and back really well, if not so much the sides. Easy to use and good workmanship.
Actually it IS meant (IMO) for pocket carrying.
Have it for about a month, still looks as new. If however looking for a drawback, then to my daily use pattern there is one. While in the case using the Kaiser/Tilt for navigation (in a cradle) needs taking it out of the case.
======
Saar

I've tried several ...
Tothotspur said:
i would be interested in your opinions and if you could confirm these points for me:
1) Can you still use the touch screen?
2) If the slide up and tilt works fine with the case on
3) The general quality and how bulky it is in a pocket
this looks perfect for me as i wanted a 2 piece armour case where i could still slide open the phone
Click to expand...
Click to collapse
Just wanted to add my comments based on owning 4 different cases for the Tilt/Kaiser ...
The PDAir aluminum cased is good and pocketable. It is a little on the heavy side, but I've carried it arond now for a couple of weeks and it's all right. The downside is that there is a hard plastic protector over the touchscreen of the Tilt. You have to open the case to use the touchscreen or you have to take the hard plastic out. You can either cut out or push it out with some force, but the plastic is glued in and is under the neoprene that cushions the Tilt against the case. Not the smallest feel in the pocket, but no leather covered cardboard bulk feel. The size of this reminds me of a naked 8125 in my pocket (did that without disaster for almost 2 years).
I also tried the PDAir leather flip case. That one is definitely not pocketable unless you have some REALLY big pockets. And I'm not a big flip cover guy. Another strike is the plastic keyboard cover.
I also tried the Noreve and it's a nice leather case. I would consider this one pocketable, it's rather slim. But it has the flip cover. The good thing is that it has no plastic keyboard cover. It's a little loose when you close the cover with the snap. It's not loosely held in ... that's a good fit. But the snap doesn't hold the flip cover down as firmly as I'd like.
Lastly, I JUST snapped on one of the plastic snap-on kind. Good fit, but not sure how much the plastic will help in a fall. It snapped on tightly ... so tightly it took 15 minutes to get it off! I did not like that at all. If something goes wrong and you need to drop the battery quickly ... 'quickly' won't happen with this case. You can still use the touchscreen and it's a very tight snap on fit. Doesn't add much bulk or weight for pocket storage. NOTE: if you pick one of these up, be careful and check whether the belt clip button on the case is screw on or permanent. The permanent ones won't be pocketable.
The best feel in the pocket is the plane Tilt/Kaiser with no case. But I know I'm pushing my luck if I continue to do that. Still switching up to see what I end up liking most. Hope this info helps folks.

Tothotspur said:
i would be interested in your opinions and if you could confirm these points for me:
1) Can you still use the touch screen?
YES!
The openings for the keypad and LCD are tappered to provide the best access to the edges but they become alittle harder to get at due to the thickness of the plastic.
2) If the slide up and tilt works fine with the case on
Yes the screen slides out and up to the normal position. The upper softkeys are silightly harder to get at when tilted due to the tickness of the plastic.
3) The general quality and how bulky it is in a pocket
Fit was tight, and snapped into place. I do not plan to use the clip as it is optional, but I will follow up with a proper review and test it out. I will get exact mesuraments later but it is not a big change and well worth the extra size.
this looks perfect for me as i wanted a 2 piece armour case where i could still slide open the phone
Click to expand...
Click to collapse
Yup! Cheap Too!
I will follow up with a better review tonight.

What I do not understand about using the transparent plastic snap, is why the hack would one need a case at all when all the really "pocket sensitive" components (Touch screen, Camera lens) are not covered at all... IMO if one is indiferent to this, they may not need a case at all.
I guess that all cases are kind of trade offs. Whatever protects adds bulk in the zones protected, light protection protects less than heavy armor but presents snappier use and so on.
The potentially best solution I've seen yet is actually not offered for the Tilt/Kaiser. It is made by EB Cases and called the eNovo. It is made of sturdy yet thin laminated leather, offering a form fitting case with an optional leather flip.
http://www.ebcases.com/-strse-3333/eNOVO-PAQ-6500/Detail.bok
I'm trying for some time to convince EB, Noreve and BoxWave (the ones apparently having the technology) to think about it...
Cheers,
======
Saar

thanks kahibbi and SpeedRazr for your input, i look forward to your review

SpeedRazr said:
I just ordered one of these yesterday. I will let you know how it is hopefully tomarrow or over the weekend.
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
I picked this up from DayDeal.com and it didnt' fit my ATT tilt. the back does but the front will not stay on
i picked up the alum. case for travel and biking it is perfect. also from DayDeal

NoreveUSA 15% off coupon

http://www.noreveusa.com/
http://www.noreveusa.com/category/S...0_-_HTC_Touch_Pro_Tradition_leather_case.html
Code: Holiday08
Exp: 12/31/08
I have the case and I love it. I'm thinking of using the code for the new metal clip.

looks nice. but kinda pricey for a lether case =T

Yea, it looks really nice.
I wonder how stable it is in the case once it slides open.

The leather case looks sweet....but does it work ok with the slider?
Anyone use it?

I use it and love it. The phone is totally secure inside even when using the slider.

The case holds the phone quite snug even in the open position.
The new belt clip is so much better than the one they used just a year ago.
The warranty on the case is lifetime, my kaiser case wore through around the GPS ant opening and they replaced it no questions asked.
It's worth the expense, paired with InvisibleSHEILD on the face only (had to buy the full body and only use the face pieces as the case is too snug for the full skin)

I just received this horizontal case from boxwave http://www.boxwave.com/products/dlcase/at_t-fuze-designio-leather-case_3350.htm
I didn't realize that it did not come with a belt clip, also the fact that the keyboard is covered by the plastic worries me, (Keyboard paint will stick to the plastic overtime?)
So just to reiterate what Kyphur said, this Norve case does come with a belt clip?

Yes it does.
I got the Proporta case first and it had the plastic over the keyboard, I didn't like that at all.

Order Submitted, Thanks.

kyphur said:
The case holds the phone quite snug even in the open position.
The new belt clip is so much better than the one they used just a year ago.
The warranty on the case is lifetime, my kaiser case wore through around the GPS ant opening and they replaced it no questions asked.
It's worth the expense, paired with InvisibleSHEILD on the face only (had to buy the full body and only use the face pieces as the case is too snug for the full skin)
Click to expand...
Click to collapse
Hm I was really looking forward to installing BodyGuardz and then using the Noreve Case. But from what I heard is that the BodyGuardz case is thicker than the InvisibleSHIELD. So from what kyphur says, I probably couldn't install BG and use this case?

The Noreve case is too snug for any full body protector. You will only be able to use the front face.
papercut2199 said:
Hm I was really looking forward to installing BodyGuardz and then using the Noreve Case. But from what I heard is that the BodyGuardz case is thicker than the InvisibleSHIELD. So from what kyphur says, I probably couldn't install BG and use this case?
Click to expand...
Click to collapse

Best &/Or Thinnest Cases for TMOBILE USA HD2 ?

I have ordered a few cases before I was told that the TMobile USA HD2 is a slightly different size than others and now I have received those cases and they don't fit, now I am dissapointed and back out on the search for a case that actually looks nice and fits as well...Any advice? One case I do like is this :
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150398009772&ssPageName=STRK:MEWNX:IT
But please dont let this limit your advice/recommendations... I am looking for any kind of case other than a leather pouch type case and I also do not wish to have those leather cases which have a flap that covers the screen..... any advice ?

I have been using a T-mobile Wing case I found for $5 at the tmo store on clearance. Good fit but it snaps on the front and it makes me nervous every time i push on them and they push against the glass. Still looking for a better case.
Someone told me the type that are held closed using a magnet may cause the famed "newton ring" so i'm not sure what to get.

erebusting said:
I have ordered a few cases before I was told that the TMobile USA HD2 is a slightly different size than others and now I have received those cases and they don't fit, now I am dissapointed and back out on the search for a case that actually looks nice and fits as well...Any advice? One case I do like is this :
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150398009772&ssPageName=STRK:MEWNX:IT
But please dont let this limit your advice/recommendations... I am looking for any kind of case other than a leather pouch type case and I also do not wish to have those leather cases which have a flap that covers the screen..... any advice ?
Click to expand...
Click to collapse
Don't get that one. I ordered the exact one weeks before I got TMOUS hd2, and it doesn't fit.
I mean, it fits, but not perfectly. Plus, the material was too rubbery.
I don't even know if that's the word, but it's very shiny and doesn't feel that great in my hands.
It gives killer grip on any surface, though.
But once again, that cover does not fit your device perfectly.
I threw it away. such a waste...
I'm using the default gel skin it came with.
It's very nice, surprisingly. it's not the normal silicone cover that attracts every sort of dust in your pocket.

yeah i ordered two cases off ebay and one came in guess what they don't fit lol..awaiting more cases

I ordered and received that case already, but I wanted one that fits my phone...it does not fit completely but it will do , it is very nice in my opinion, shiny and slick , I do not like the stock one too much as it causes my fingers to feel dry and sticks in my pockets so it doesn't slide out easily enough...
any advice...anything like a 'barely there' case for our phone ?...
please post any ideas/ advice/ experiences/ anything..

jcbofkc said:
Someone told me the type that are held closed using a magnet may cause the famed "newton ring" so i'm not sure what to get.
Click to expand...
Click to collapse
I don't have an HD2, yet, but...
I've used a horizontal belt holster with a magnetic clasp for my TP2 since I got it in September. It's in the holster everyday, and I have yet to see a Newton Ring develop on my screen.
When I get an HD2, I'll be calling my local T-Mo store every week to inquire about future cases (like the one erebusting purchased) for the HD2 -- I'm afraid a 3ft drop would cause the thin phone to break in half! I also want a thin, hard case so I can still put the phone in a horizontal belt holster (I hate putting my phones in my pants pockets).