Hi,
i buyed an Omnia i900 last friday, everything is oky but, eyerywhere where i go, the singnal strenghts is very low when i turn on WLAN. is it possible to "boost" up the strenghts of the signal? perhaps with some regestry tweaks?
I tried to enable 802.11g, but this has no great effect. Is it posible to get a bit more power to the antenna or something like this?
thx a lot!
i have the same problem not found a fix or anything yet!
i have the same issue. upgraded to latest rom dxia5. still low signal . i guess this is a common problem.
Related
Hello.
I have recently bought for second time a Qtek 9100 and i have noticed that it has a really poor reception, regarding wifi signal.
More specifically, if i move to next room( few meters away) i loose half strength of signal, and if i move another room (less than 10 meters from my pc) i barely have signal (around 20%)!!!
With a Qtek 9000 i had before, in the same room i had around 90% wifi signal and with my laptop the same!
I have to notice that i selected "best performance" in wifi settings( but the strange thing is whether i have it in best performance or best battery life i can't see any difference).
Is this a hardware failure? If so, i should move quickly to get an exchange device before the replacement period ends.
Thanks in advance for your help!
same problem, tried the wifi g hack, no results. I suggest you try that [wifi g hack] any help from anyone else would be good though
Yes, i have tried that, but no luck.
No change with that!
Is the poor signal normal? Any other 9100/Kjam user to share his feedback?
Please tell your experience as to know if my device is defective, in order to move quickly tomorrow to exchange it.
Thanks!
well i dont know, i get normal signal at home or on anyother open home wifi network, but at school which has wpa-tsk settings, i can only access the wifi when im across the hall. they have another router in the other building, but i can be 5ft away from it and get nothing
Hmmm, i have problems whenever i try to connect to router, usb wifi key, public access point, anything. Just 10 meters away and signal goes close to nothing. So, i am convinced that it is a defective unit.
If anyone else can tell us their experience...
Ok,thank you for your help!
Ur lucky you can connect at all.
I can't even connect to my home wifi set up!
Well I can if I plug the Wizard into my laptop via USB!
Have you guys tried running this CAB? I think it does more than change one registry setting. I have a QTEK 9100 and it worked well for me. No issues with distance or performance (at least not yet). Using a Belkin Pre-N router. Make sure to soft reset after running the CAB on the device. Hope it works for you.
Did nothing for me,
Still can't connect to my home WiFi
yea i have this installed now for about 2 weeks.no additional results
Yes, i have installed it too, no luck with it...
Hmmm, things get complicated.
I tested an 9100 and a Qtek S200 in a shop (demo phones) and i have seen that their wifi is close to my 9100 as far as it concerns the signal.
So, if this is the normal, this sucks!!!
Since 3 days that i have started investigating the case, i have compared my 9100 with a Dell Axim X51v, a Palm Lifedrive and a Qtek 9000, all in the same place.
The results:
Palm lifedrive: 90% signal
Qtek 9000: 80% signal
Dell Axim 51v: 50% signal
Qtek 9100(mine): 25% signal
What the heck!!!
I start to believe that 9100/S200 have a very bad wifi module, regarding it's signal ability!
Any other feedback?
Noone uses his wifi?
Thanks!
I can only tell you that I have the same. the WIFI modukes are not the best you can get.
I can use it but it looses the signal quite often by just moving the phone. :?
Yes, i believe that all new Qtek's-after the tests i've done- have bad wifi modules( except maybe for Qtek 9000, all the others are crap)!
Is it normal that about 15-20m from my home WLAN access point, TyTN loses the signal. Even within 4m from the WLAN station, the signal bar won't go to the highest level?
Is this normal behaviour?
I have used laptops with internal WLAN cards that can reach the access point from about 50m away without any problems and signal level at good.
same happens to me, my dell laptop works just fine but my tytn looses signal 8-10 meters from wifi spot...
Change the power save mode to best performance, to see if it helps:
start - settings - connections - wireless lan - power mode
Although it doesn't sound like the case, it is possible for the radio receiver to be overloaded if the signal is too strong as would be the case with it right next to the AP.
Bit like trying to listen to music standing next to a speaker chucking out 10kW
David.
Yup, have tried that power save/performance thingie. Wasn't much difference wether the powersave or performance was at it's highest setting.
Hi, Which is your serial number...starts with HT6??? ?
Bye.
Yeah i can agree my wifi signal is poor on my MDA Vario II, worse than my Vario, and far below my laptop,
it sucks as i live just near a star bucks and have a 1 year t-ob hotspot subscription.
not sure if its the same problem but my vario2 constantly drops its wifi connection and starts searching for others regardless of signal strength. When i called T-mobile they confirmed it ws a hardware fault and are sending me a new replacement.
Wiper said:
Is it normal that about 15-20m from my home WLAN access point, TyTN loses the signal. Even within 4m from the WLAN station, the signal bar won't go to the highest level?
Is this normal behaviour?
I have used laptops with internal WLAN cards that can reach the access point from about 50m away without any problems and signal level at good.
Click to expand...
Click to collapse
poor WLAN reception was quite an issue in HTC Wizard and unfortunately problem remains with HTC Hermes/TyTN as well. big shame imho, however since i have web'n'walk deal, i don't use WLAN in my Vario II at all.
ferrari said:
Hi, Which is your serial number...starts with HT6??? ?
Bye.
Click to expand...
Click to collapse
The s/n is HT628F...
I have the same problem described above. Very weak signals and constantly dropping connection / looking for other signals. I have an M3100. Is it a ROM or hardware fault?
Same problem here.
2 laptops work fine, as did my HTC Prophet (Orange M600).
I returned the M600 and went for the M3100 instead. Little did I know the M3100 would have problems picking up the wifi signal from my router where the M600 had NO problems at all.
I've been considering replacing the wirless router for one with a bigger range, or installing a signal booster of some sort.
I thought maybe I have a duff phone, but looks like it's the norm.
So far at least my replacement Vario2 isnt displaying the previous wi-fi sigal dropping problem so maybe the problem was ironed out on the newer models - my old serial number was HTC623 and the replacement is HTC624
same here - very weak wifi on serial - HT634xxx
Yes i need to also confirm that my unit is suffering from very weak wifi signal.
Right now im siting by my 838 Pro and my notebook, my notebook has "full signal (5 bars)" but my 838 pro has "very weak signal (1 bar)"
my unit has serial number of HT634xxxxxx
bought in bangkok 4 days ago.
Thanks for any inputs
Cheers
NR
Just got my phone this week, serial number is HT635, WiFi performance is crap.
I've only managed to have it work once so far for about 20 minutes, even if I stand next to my router.
Doesn't work at work either.
magicalex said:
not sure if its the same problem but my vario2 constantly drops its wifi connection and starts searching for others regardless of signal strength. When i called T-mobile they confirmed it ws a hardware fault and are sending me a new replacement.
Click to expand...
Click to collapse
Are your sure they said it was a hardware failure??
I have the same problem. Sitting about 5 ft. from my wireless router the Tytn drops the connection, displays 2 wireless icons in the topbar and wants to connect the the wireless router of somebody else. I have to delete the wireless settings and re-enter them in order to get WiFi working again. The signal is also very weak and after 10 meters the connection is gone. HT633.
Pardon my ignorance, never tried wi-fi, but anyway... Couldn't be a reason that AFAIK 'g' mode is turned off by default? I thought I saw it in the one of the tweaking utinily...
What ??? The Wi-Fi in TyTn is that very bad ???
I hate to say that I just ordered that phone with T-Mobile NL ! And I ditched my Magician. The reason was that I want that Wi-Fi !!
Poor me
Lurker0 said:
Pardon my ignorance, never tried wi-fi, but anyway... Couldn't be a reason that AFAIK 'g' mode is turned off by default? I thought I saw it in the one of the tweaking utinily...
Click to expand...
Click to collapse
I think your point is accurate there Lurker. I've done some hunting around to find a Registry hack to enable Wifi G which I found here.
I'm happy to report that it actually made quite a difference. Previously the signal would cut out constantly in my living room and was generally useless. After applying the Wifi G hack, I get a medium to low signal in my living room, which is stable. I've tested the bandwidth and it is exactly the same as my PC gets. The Vario II Wifi reception still isn't exactly great, but it works in the rooms I need it to, so that's good enough for me.
Here is the hack (amended for Vario II):
1) Locate the following key: HKEY_LOCAL_MACHINE\COMM\TIACXWLN1\PARMS
2) Add new DWORD Value:
name: dot11SupportedRateMaskG
D value: 8
guys, this hack is for the Wizard only and does nothing on the Hermes... the Hermes comes with 802.11g wifi enabled by default.
hi!
I have really bad/no wireless signal from my router which is just 4 meters and one wall away, while my MacBook shows full strength at the same spot.
I'm using Black ROM 3.0.1. And I have set signal to "Best Performance" at the wifi settings.
Is there any SW to improve this issue? Is there anything at all to help me?
Thanks!
hmm wierd
i catch signal even 30m far from my router (behind few walls). i never had any problem with my wifi recepion, maybe radio rom is too old ,which one are u using ?
don't think so. I use 1.54.00.10. What do you think?
same here, receptioin sux...i'm using the att official wm6 rom...it happened on wm5 for me 2
I am also having the same problem. I am only 3 meters away and I have no signal. My laptop has full signal at 30 meters. Any help would be greatly appreciated.
Is there anything to rectify the signal issues on the niki?
I have touch which has fine signal and dual which always loses signal gms and 3g.
they are both in the same place and i get drop outs from one second to the next.
I dont think i am running a special rom other than the original orange uk rom. i could be wrong mind...
same issue here
i am running nikki,s rom now and have tryed every radio on my mda touch plus but signal is very bad al the time with every radio version i think it is a issue off this phone or does anybody have tips to improve signal.
Hi, in my country there is Only GSM 900mhz Signal. So I don't care 3G.
I have recently acquire a HTCTouchCruise. What happens is that the signal strength is very Low. For Example in indoors there is no signal at all where my Blackberry8320 works like a charm.
The original ROM that came was Aserg In Russian. I don't Speak Russian..
What do I do was to upgrade to Sirius uDk R7. The same situation almost no Signal. NO improvement at all. The camera was not working until I change to Radio version 1.59.x.x. Even with 1.59 No signal improvement ....
The solution seems to be a Murata Radio Version. But R7 requires a Radio version 1.59.x.x but all Murata version I found was for 1.58.x.x. Even with Murata 1.58.25.14 or 1.58.21.23 the signal was the same.
What I am asking is some successfully configurations that IMPROVE RADICALLY the signal. My TouchCruise looks like an IPOD with poor signal...
ROM VERSION???
RADIO VERSION????
Some tips and Solution.
THANKS in ADVANCE!!!!!!!!!!!!!!!!!!!!
try this http://forum.xda-developers.com/showthread.php?t=470510
Why is this your recommendation to improve signal??????
Sorry, i was in a hurry.. Why does this ROM will be the best for improve my signal. Did you have the same trouble and this one help you???
THANKS!!!!!!!!!!!
You can use any ROM based on 1.31 or 1.60 drivers with 1.58.xx.xx murata Radio ROM.
ROMs based on 3.13, 3.18 or 3.19 drivers only work with 1.59.xx.xx Radio ROMs.
Sascha
I will give it a try and then will post the result....
Posting results....
Hi folks... NEED HELP....
First or all I installed the original rom
* RUU_Polaris_HTC_SPA_3.13.412.0_radio_sign_25.85.30.07_1.59.42.15_Ship.exe
In a short story the same NO signal in my phone where almost any phone catch signal. Cant try 1.58.x.x Radio because they were designed for 1.60 drivers.
then I pass to
* c_shekhar_Pola_16021014aCS_Build21014_Public.rar
I made every step posible. Downgrade the Radio version and then Installed the ROM. No change!!!!
Tried then
* Radio_Murata_PPAS_1.58.21.23 and then * Radio_Murata_1.58.25.14. Nothing change also...
The rom is great but the same signal.
If I try to catch the signal inside my room what i get is "Denied, Searching" but if I go outside I catch the signal and can call and check balance. As soon as I enter in to the House the signal remain the same but the phone is not reachable. If I try to check balance inside Home with the signal that remains from outside is says:
"Waiting......
Session Terminated"
Please could someone indicate me what to do to recover signal I leave in a City so lost signal here is no usual.
Hi, hell.cu
There is No point in updating two threads. Looks like you have a hardware problem. Get in 'touch' with HTC support as there seems to be no solution available at present with software. Good Luck ....!
that is too bad.. I cant get back to HTC. i didnt buy there... So there is no solution????
Hi people. Just to inform you that havent found any solution... Just send the phone back. Too bad it was a really nice phone.
I love my BlackBerry 8320 so I maintain this phone.
For the record I believe that HTC makes good phones, desing, funionality and even software. But I have seen to many problems also in hardware respect HTC phones. First was a Excalibur and know is the Polaris.
No luck over here...
Maybe there is just no witchcraft to do my friend.
Maybe the signal strength is just the way it is and can't be improved.
I have same problem here and noticed that it is very depending on the weather how strong the signal is.
If you have the same trouble you wouldn't have that phone. Just in the House i have no signal. It is like if i doesn't have phone at all.
Only in the middle of the street i have signal.
hell.cu said:
If you have the same trouble you wouldn't have that phone. Just in the House i have no signal. It is like if i doesn't have phone at all.
Only in the middle of the street i have signal.
Click to expand...
Click to collapse
have you tried playing around with your Settings/Phone? there is a band selection that can be selected either manually or automatically.
Yes I play around like a monkey. But nothing seems to change the Signal strength. I think that some (not all) Polaris has this issues.
Thanks for the reply. You could also check http://forum.xda-developers.com/showthread.php?p=3348474