Hello all,
1st Thank to all of you about your efforts helping such like me.
2nd Is there any way to upgrade ROM from SD card? I'm not able to connect the Artemis to any PC trough Active Sync and also trough bootloader mode the device is not visible for the upgrade wizard.
Many Thanks in advance
SD Flashing....
I'm in the same boat...my USB port on the Artemis must be bad as it only allows charging..can't sync with WinXP computer at all. No problems with other WinMo phones. Besides forking out some $$ to get a USB port fix, can't I flash a new ROM to the Artemis (both Radio or ROM) via SD? It seems I recall doing this for my PPC-6700 at one point. Anyways, I would love to resurrect this phone as I really liked it and the new ROM(s) and Radios out there would help it a lot.
Any ideas?
Thanks!
~Dubhead
Normally u remove your sd and sim card b4 u flash but if it still doesn't work then here's a link-
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
But read this first b4 u brick your phone.
http://forum.xda-developers.com/showthread.php?t=331845
Related
I downloaded the upgrade from Siemens web site and ran the program.
my phone is now stuck in the upgrade window and will not reboot.
Any Sugestions?
RE:
Phone will not reconect to activesync either.
RE:
Tried a hard reset and soft reset no results.
I think I'm Screwd
You need to get an sd memory card and card reader/writer, using the tools available here on the site you will need to write a rom to the sd card through sd card reader on your pc, then you go to bootloader mode and the sd card will burn the rom to your xda.
Thanks for the advise. I have a 1Gb sd card so I will get a reader.
I'm kind curious about Bootloader? Can Anyone enlighten me or point me to posts that have the info I'll need.
My computer is running windows is this ok?
All advise is much appreciated
Thanks For all the help. I fixed the Problem with the Bootloader. Finished the upgrade to A.30.09.
I just wanted to say that it is AWESOME to have a sight like this when the manufacturer doesn't have a clue how to answer many of these Q's.
THANK YOU QMAN (i got the info off one of your posts) AND ALL WHO PASS ON KNOWLEDGE HERE!!!!!!!!!!!1
Hi i have previously read on the hermes forum that it is possible to ugrade by using only the memory card. My dilemma was my USB mini port wont work and i need to reflash a new radio and rom to my dopod 838. can anyone hlep and guide me on this? like how do i start? what files do i need? etc... its my first time to reflash this phone and i am afraid i might brick it. thank you.
http://forum.xda-developers.com/showthread.php?t=276963
you may check steps 1-6 to see how to get a ROM dump on a SD card.
if you have a SD card with the ROM dump just use step 7 to upload from SD into ROM.
did it only with a dump from my own Wizard and back into it but not with a dump from another Wizard so better read through the thread yourself carefully first.
Hello I have an HTC tytn (hermes200) and its on sweedish lang I would like it to instal a new rom to bo on english. I instaled SIM and CID unlocker and it works fine. But when I trie to instal a rom like CRC r13.5 it disconects my phone from the computer, I use an USB conection via ActiveSync. That conection works fine when I transfer files or something else and the only time it disconects is when I trie to instal the new ROM, please help I tried everything and btw I dont have a SD card my curent OS is Win 6.0 Pro but I dont understand a word of the lang heh, but the phone is so cool and I just cant give it away.
Please help guys..... Sorry for my english...!!!
btw I instaled Hard SPL v7 and SIM and CID unloacker without any problems, the only problem is instaling the ROM...!!!
re-installHard SPL V3 if you installed before the sim/cid unlocker.
Use the sd card method to install a new rom... Just make sure you have a 2Gb sd card or less and its formatted FAT32(they are default FAT).
copy the .nbh file of the rom you want on to it and rename to hermimg.nbh. insert into hermes, reset into bootloader(tri-colour screen) and follow the prompts. If you did it right then you now have a new os on your Hermes.
Depending on the os on your pc it could be a few different things...
If you're using XP then upgrade the .net framework to 3.5.
Vista and 7 I can't say...
Ok thx I will trie to flash from the SD card I hope it works...
This may help..
http://forum.xda-developers.com/showthread.php?t=640485
i have a problem, my slot for memory card is broken, last month i updated my rom to 2.1 (memori cart is worked then) and i dont like it. Now I am trying to get back to 1.6 but i can not sucsess.
I try 'android 1.65.405.1 one click backup' but the error 171 usb connection is consistently appearing...
I try on several computers but the same message always comes out...
Can you help me?
Sorry for my english....
Here.
http://theunlockr.com/2010/03/30/how-to-unroot-the-htc-tattoo/
don't know if it's possible without a working memory card slot...
You can do the unrooting with an app, look for it in the forum, but i don't know about that error. I am sure someone knows something about this!
back to original rom
just download original ROM this one or from shipped-roms.com
connect your tattoo with USB to PC
run downloaded ROM it will work for you
if problem appear install HTC sync from htc site then retry
i done many time it it work fine
i try that but i don't have working memory card can this make this problem?
ststeva said:
i try that but i don't have working memory card can this make this problem?
Click to expand...
Click to collapse
I didn't get ur problem please explain it
If u install Stock ROM from ruu it not matter memory card no role of memory card in installing
Hello guy's
I recently bought a second hand HD2 by internet (NLD)
I was so happy .... but when i switching the hd2 on I got to see UPDATE FAILED!!!.
(see pictures)
and this is the bootloader
http://imageshack.us/photo/my-images/802/dscn5268mobile.jpg/
i've tried to connect de hd2 to my comp. but it does not regonize it
I looked around on the net and here on the forum but I do not get it
can you pleassse help me with the correct links !!!
try this:
plug into pc - install drivers
(instead of serial, there need to be "USB")
then do a task29 (delete nand)
then try to flash your fav. winmo rom again!
(if you dont want winmo, you need to flash another hspl version for android)
come in this chat: http://www.chatzy.com/577626290448
oke, but there is no way....that i can connect my HD2 by usb
so far only by sdcard
I tried to delete HSPL en go Back to SPL ...with stock rom (htc-website)
(sdcard trick) still failed....
i think i am doing something wrong
can somebody help me...with the right files
Most often the reason the SD card method fails is because a 8GB or greater SD Card is used.
A 1 or 2GB SD Card would be a bettter option.
fred_up said:
Most often the reason the SD card method fails is because a 8GB or greater SD Card is used.
A 1 or 2GB SD Card would be a bettter option.
Click to expand...
Click to collapse
OKE ...maybe thats the problem...i tried every methode
REMOVE HSPL, uploading a new custom rom, radio etc
and all FAIL!!! still having a non working HD2
<<< To be continued >>>
passievrucht82 said:
OKE ...maybe thats the problem...i tried every methode
REMOVE HSPL, uploading a new custom rom, radio etc
and all FAIL!!! still having a non working HD2
<<< To be continued >>>
Click to expand...
Click to collapse
You need to have HSPL to flash custom ROMs.
Have a good read * HERE *. These are the instructions I followed when I first got my HD2.
It is a bit of a read, but it is very well worth it.
First off did you use your serial number to download the Windows Mobile ROM from the HTC site?
Second, yes a 2 gig or smaller SD card works best but have you tried doing a complete formatting the SD card using Fat 32, also did you rename the file LEOIMG.nbh and place it on the root of your SD card? It has to be named LEOIMG.nbh cause the bootloader will not recognize any other file name, and it has to be on the root of your SD card or it will not detect it.
Third, do you see Serial or USB in the white bar of bootloader when you try to flash via RUU? If it says Serial you do not have the HTC USB Sync connection between your computer and HD2. If it says USB you should have the HTC USB Sync connection.
Fourth like member fred_up said you have to have HSPL to flash any custom Windows Mobile ROM, and you have to have HSPL 2.08 to flash MAGLDR and a 2.07.50.xx or higher radio too, and you have to have HSPL to flash cLK also.
Fifth your battery has to be 50% or more to be able to flash via RUU or it will not let it. But if you do not have a working Windows Mobile ROM, MAGLDR Android or WP7 ROM, or a working cLK ROM, you can not charge your HD2 cause it does not charge in bootloader. Although if you can get cLK to flash you might be able to let it charge while it is off, not 100% positive about that though.
Last have you downloaded and tried out the HD2 NAND Toolkit? if you have not I suggest you do as it might make things a lot simpler for you. Also take a look at my guide linked in my sig as it might help you understand your HD2 a little better.