i finally found a hero rom that works for me but one thing i dislike is that popup sms is very buggy on it. ill get notified a few times for each message. ill get the same notification twice, about 20 mins apart. is there any other app out there that works like popup? i need my screen to "wake up" when i receive an SMS/MMS.
by any chance have you made sure to disable notifications in the sms settings of the device. Also check to make sure you do not have the sms popup setting for reminders enabled. Not using it right now only cause I have been toying with different roms and have been reformatting my sd card with each rom but when I was using it at first with the qtek hero rom I did not have any issues. I am about to flash the evil 1.6 and will test it on that rom and post findings.
[email protected] said:
i finally found a hero rom that works for me but one thing i dislike is that popup sms is very buggy on it. ill get notified a few times for each message. ill get the same notification twice, about 20 mins apart. is there any other app out there that works like popup? i need my screen to "wake up" when i receive an SMS/MMS.
Click to expand...
Click to collapse
Try dgAlert Classic, allows you to set some good sms mms settings including; wake up, led color etc...
yes i did have my notifications set up correctly in both popup sms and the native sms app. i will try this other app and see how it goes. thank you both for the replies.
I have been running on evil's 1.6 hero rom on tmobile mytouch and have had no issues or conflicts with sms popup
timace said:
Try dgAlert Classic, allows you to set some good sms mms settings including; wake up, led color etc...
Click to expand...
Click to collapse
does the led color settings work with the hero roms?
ok guys...a little help please. could you please navigate me to sms popup settings? not finding and since there aren't too many places to look, i'm either a doof (likely) or fatal1ty1.4hero has it removed (less likely).
has anyone else gone through this issue yet? i sort of feel like im the only one lol. im currently on modaco 2.2 but popup sms wouldnt work modaco 1.51, a few drizzy roms, and a few jac roms. on modaco it doesnt turn my screen on but when i hit a key the message with pop up notification shows up (but that sort of defeats the purpose of the app). my settings are correct (notifications in native messaging are turned off, notifications turned on in popup sms, message priority setting is on high). i also think i miss a lot of message when i have popup installed.
as a former iphone user this app is huge for me. i normally have to keep my phone on vibrate so its nice to be able to see the screen light up and also have the photo, name, reply button right on the little window. i would be extremely grateful for anyone who could help me set this up on my hero rom!
currently using tmobile mytouch 3g. modaco 2.2 32b hero rom.
SMS Popup v0.9.97 working fine here...
How to enable "play sound/repeat" in Sound & Notifications audio settings?
If I missed a notification (email or reminder) I'd like to hear a beep or other sound at selected intervals.
Thanks,
Andy
SMS Notification repeat
Since we are noobs and not real, I thought I might share my searching results. First the search only returns results with "sms repeat", and not much with the Topaz. I had the same problem with my old Kaiser, and there was a great little program on Modaco (http://www.modaco.com/downloads-file2400.html) that I think was more about led notification but worked for my need to get repeat SMS notification. (I am a network engineer that is on call a lot)
I did a bunch of registry hacks on the Kaiser but nothing that worked very well and ended up using Phils program above, but not on my Topaz yet. It is still stock ATT rom.
I did find references to 3 other programs:
MissedCallReminder
PhoneAlarm
spb phone suite
The Phone Alarm (http://www.pocketmax.net/phoneAlarm.html) has a couple of varients, and looks like it might be easy to install, and has a small footprint piece called AlarmPal that has a feature of turning on and off bluetooth that might be helpful if battery life is an issue.
Phone Alarm supposedly works on 6.5. AlarmPal looks like just 6.1 and below, but there are posts about Diamond with a WM 6.5 ROM.(less than $12.00US)
Missed Call Reminder is from here (xda-developers) and looks like one of the moderators might be using it but the post is from Nov, 2008. He has updated it and the files in the cab are from April of 2009. It uses 236K of memory. Not sure if that is alot or little.
I do not have time today to try these out, but should have a little time later in the week.
I too would like this feature enabled. There has got to be reg tweak that will enable the "repeat" box to be checked under sounds & notifications. I will search around as well.
I found this in another forum so I will post it here too. It is over a year old post so I'm not sure if it works yet but I will try it out and post my findings if you all want to wait for confirmation if it works or not on WM6.5. Thanks to Jackalz for this find (http://forums.techarena.in/tips-tweaks/992968.htm).
In Registry Editor, navigate to the following registry key branch:
HKEY_CURRENT_USER\ControlPanel\Notifications
There is a lot of registry sub-key inside the Notifications folder. Search through one by one to find and locate a registry entry that has its Default (REG_SZ) value as the name of the event. For example, Messaging: New e-mail message, Messaging: New text message, Messaging: New MMS message, Phone: Missed call and etc.
Once found the correct registry sub-key that represents the event that you want to enable the “Repeat” option, edit the value data for Options value name. Change the value to 1073741835 (in Decimal base) or 4000000B (in Hexadecimal HEX base format). Save and exit from registry editor.
Now the Repeat check box is enabled, and user should be able to set repetitive and recurring event notifications.
EDIT: I have just verified that these registry settings worked. I was able to enable the repeat option for New emails, new text and new mms message. CHEERS!
Edited post: I did the above registry tweak and as in the kaiser, It would not stop repeating after reading the sms. I deselected the repeat option and set the registry key back to 0000000b. back happy again..
Old post:
I will try that one.. On the old Kaiser, it would repeat, but unable to turn it off. It kept repeating, no matter what I did to turn it off.. Thanks,
Jack
SMS repeat notification
AlarmPal worked... and even quit "reminding" me after I turned it off..
SMS repeat notification program testing results
Missed Call Reminder: looks like low footprint but repeated Voicemail notification even when I did not have voice or voicemail notification on. Only way to turn off the voicemail notification was to actually listen to the voicemail, just acknowledging it would not turn off the alert. Also after opening it up once, have to reboot the phone to get back into the configuration. Not a problem if I was able to turn off the voicemail alerts.
Alarm Pal worked as advertised but memory usage climbed from 72% to 82% in 14hrs. Will reinstall and continue monitoring.
ramseyjack said:
Missed Call Reminder: looks like low footprint but repeated Voicemail notification even when I did not have voice or voicemail notification on. Only way to turn off the voicemail notification was to actually listen to the voicemail, just acknowledging it would not turn off the alert. Also after opening it up once, have to reboot the phone to get back into the configuration. Not a problem if I was able to turn off the voicemail alerts.
Alarm Pal worked as advertised but memory usage climbed from 72% to 82% in 14hrs. Will reinstall and continue monitoring.
Click to expand...
Click to collapse
ah, maybe that's why they disabled it in the first place. haven't experienced that issue with email's or text messages on mine.
Repeat Notification SMS
Have been using Alarm Pal for a few weeks, and it works quite well. I still have the memory usage pump up to above 80% pretty quickly (8-16hrs) but I am a real heavy user of both email, text, alarms and phone. Any others using something different with a smaller memory footprint?
ramseyjack said:
Have been using Alarm Pal for a few weeks, and it works quite well. I still have the memory usage pump up to above 80% pretty quickly (8-16hrs) but I am a real heavy user of both email, text, alarms and phone. Any others using something different with a smaller memory footprint?
Click to expand...
Click to collapse
I used MSentinel, you could try that! (after installing you should check the settings - mine checked the status every 1s and drained the battery very fast)
http://forum.xda-developers.com/showthread.php?t=529227
On my Typhoon I used an modified version of MortScript-based reminder - it does not stay in memory, uses wm-s notifications system and executes itself after given time (made also a full hour bell from it ). Its even possible to create a custom scheduled task with it - for example run pim backup every saturday night.. The original script came with a rom from xda-dev. - dont remember the name of it
MortScript:
http://www.sto-helit.de/index.php?module=page&entry=ms_overview&action=view&menu=29
Something like that:
http://discussion.treocentral.com/showpost.php?p=1184745&postcount=17
Hello Guys,
First I just want to say I love the forum, read many threads on here last night and despite being a total noob to flashing, developing etc I thought I'd have ago and flashing my G1.
Well it went well, love the new software, but I have one problem - I can't download from the Market place - whatever application I choose to download just stays as 'downloading' but nothing actually comes down - my data connection works just fine, with normal internet browsing working normally.
I wonder if anyone could make a suggestion - please find my phone set up data
HTC G1/Dream
Firmware 2.1-update1
Baseband version 62.505.20.17H_2.22.19.26I
Kernel version 2.6.34-cyanogenmod
Mod Version CyanogenMod-5.0.8-DS
Build Number EPE54B
Thanks again!
Also noticed that despite inside the notifications menu, I have the LED turned on - when I receive a text the light doesn't flash?
Thanks
Ok, thats one problem fixed - the issue with downloads looks like a Marketplace issue - so that's all good!
So, just one other thing - when voicemails or texts are received the light doesn't flash - even though I've got it set up correctly in the settings....
Anyone else with this problem or have any tips?
The notificaton LEDs only work when the screen is off. You really don't need them when it's on.
Sure, but even when my screen is off and I get a text the LED doesn't blink.
Try checking that the missed call LED is checked under call settings.
All of a sudden without doing anything at all, it's working now - very odd.
This new OS is pretty Juicy on the battery, but not sure if its the fact I've been getting to know it all day.
A bug found by the looks of things - none of my contacts will save?
I've added the same person 3 times and it says saving contacts but when I got back in to contacts it isn't there .......anyone offer some suggestion(s)?
I've tried to synch with google and nothing happens - why doesn't the contact save to the phone or SIM? I'm not overly interested in storing contacts on Google - the standard firmware for the phone stores them on the phone/sim - where in the settings does it dictate where a contact is stored to ?
Thanks
Solved, the contact wasn't displayed as some of the boxes under contact settings weren't ticked - why on earth would I want to "hide" my contacts?? Oh well ......thanks
Ok, so, I was providing this in the HD2 apps forum and it kept being suggested to me to start my own thread, so, im thinking.. why do that just there? Its for wvga devices and people use it on multiple ones, so why not post it somewhere that everyone can see it?
So, what I'm going to be doing, is providing the newest versions here in cab and ext if requested.
Also, I'll try to provide some extra cabs here every once in awhile (like network settings,graphics tweaks,etc.).
So, here you go:
Current Version:
Pyrorob HTC Messaging Client v1.8.20193733.00.cab(btw, without securebox/vip)
UPDATE: Anyways.. Ive been playing around with some stuff regarding the 3733 client and i think i fixed the securebox/vip issue.. when you add a contact to the vip section now, there messages are forwarded to the secure box and there is a notification, but only in the notification bar, I would recommend to go to Settings/Sounds & Notifications/Notifications/Event:"Message:New Message" and check "Display message on screen" it will then have a pop up that tells you that its a vip message and from whom..
here for those that want to check it out:3733 Messaging_secure_vip_fix.cab
[BETA TESTING]:
//\\
LEAVE FEEDBACK PLEASE.
[/BETA TESTING]
Click to expand...
Click to collapse
Languages:
French Language add-on (install after main install)
View attachment 378429(20173127)
German Language Add-on (Install After Main Install)(credit goes to Sqoerk)
View attachment 389777(will work with newer versions until noted)
View attachment 379087
View attachment 374946(20173127)
Install this after the german language pack: pyrorob german files 2.cab
Color Icons/Notifications:
Color notification icons to match the energy rom theme
,
pyrorob energyrom htc messaging color icons.cab (Updated 8/27 to be compatible with new htc client versions.)
Color Icons For various functions (credit for most of the icons goes to Sergio76),
pyrorob HTC Messaging Color Function Icons.cab
Extras:
T-Mobile US MMS settings,
pyrorob T-Mobile MMS for htc messaging.cab (For USA BTW)
View attachment 394777
Extra Info/FAQ:
How To Install:
(If you already Have the htc messaging client installed)
First Method: (Download:View attachment 374936) run the OFF cab (First), Soft reset (Second), Install Client (Third), and soft reset (Fourth)
Secondary method:
now for the people that are having problems installing/upgrading, the most common reason is due to the fact that if you had the client installed before, it installs a service, which is an actively running dll that runs in the background (like an openly running exe, BUT IT IS NOT AN EXE!) you have to shutdown the dll to overwrite it or you will face issues.
Now in energy roms, you can go to start/tools/ and open task manager, after it loads, touch in the top right where the little arrow is and go to "services" NOT PROCESSES, find "messaging service" and touch and hold on it and set it for manual and soft reset.
If the client was installed by you, then go to remove programs and uninstall any mods for it, then the client itself, soft reset,then install the client you want.
if it was pre-installed, just install.
If your not running an energy rom, Download:dotfred's taskmgr and follow the same directions after install.
IF YOU DO NOT DO THIS LIKE I HAVE SAID, (NOTICE I SAID NOTHING OF "MESSAGING CLIENT.EXE") THEN THE DLL MIGHT NOT BE OVERWRITTEN/UNINSTALLED.
To install (if the htc client isnt installed):
Just install.
How to uninstall:
(You cannot uninstall a cooked in client, so just follow the install directions)
The uninstall procedure is really simple, basically, run the off cab, soft reset, uninstall any addons you installed for the client, then uninstall the client, soft reset, thats it.
To Upgrade:
Follow the uninstall procedure, then the install procedure.
How do i set my MMS server as default?:
In the htc messaging client, go to menu/settings/options/ then again at the bottom, menu/mms server, Highlight the mms settings and while its highlighted go to, at the bottom, menu/ "set as default". now hit back, done and you should be done.
Your on T-Mobile and are receiving SMS's titled "129" that have some weird text in them?:
Congratulations! You have The Visual Voice Mail Service!
Install: Tmobile Visual VoiceMail 1_1_1_0_24_00.cab(soft reset after)
That should remove them when you get them or at the very least make them blank.
On Verizon and are receiving weird SMS's after a voicemail?
You might have the Visual Voicemail Service too!
Try this: pyrorob VZW_VisualVoiceMail_1_1_12_11.cab
About Energy Roms:
On Energy Roms there is no sms client installed besides the winmo stock one, so you just install the cab and thats it.
To adjust the outgoing message size?:
Go to your MMS server options and adjust the size to 1024. (settings/options/menu/mms server/(mms server name)/ "message size limit")
Contacts show as a number?:
it only happens when the contact has more than one number (example:cell and home) stored.
Wheres the bubbles from that picture i saw?:
yeah,no... that was a mistake by the guy who posted the article, if you looked at the pic it says in it "sense 2.1 messaging mod"
What about CDMA? Why doesnt MMS work on CDMA?:
Well, at the moment as its very tricky. Some people say they can get it working, but from what i have seen most cant.
There has been some success with verizon in post #636 and im working on sprint, but as for others.. it remains to be seen.
from angeldeath:
Adjust the number of messages shown at one time in reading pane (only works for traditional mode):
"HKEY_LOCAL_MACHINE\Software\HTC\HTCMessaging\Harvey"
"MaxMessagesForOnePage"=dword:500
setting at around 50 or 100 should give a quicker loading time.
Click to expand...
Click to collapse
EXT Packages (For cooks):
(post a request for a newer one and ill be more then happy to post it up)
Pyrorob_HTCMessaging_Client_1_8_20193733_00_package.rar
Pyrorob HTCMessaging_Client_1_8_20181630_Package.rar
pyrorob HTCMessaging_Client_1_8_20173127_package.rar
pyrorob HTC Messaging Color Function Icons_package.rar
Older Cabs:
pyrorob HTCMessaging_Client_1_8_20192421_01.cab
pyrorob HTCMessaging_Client_1_8_20191825_00.cab
pyrorob HTCMessaging_Client_1_8_20183727_00.cab
pyrorob HTCMessaging_Client_1_8_20183325_00.cab
pyrorob HTCMessaging_Client_1_8_20182814_00.cab
pyrorob HTCMessaging_Client_1_8_20182222_00.cab
Pyrorob HTCMessaging_Client_1_8_20181630.cab
pyrorob HTCMessaging_Client_1_8_20173820_00.cab
pyrorob HTCMessaging_Client_1_8_20173127.cab
Pyrorob HTCMessaging_Client_1_8_20171628.cab
pyrorob HTCMessaging_Client_1_5_20143625.cab
pyrorob HTCMessaging_Client_1_5_20142622.cab
French:
pyrorob HTCMessaging_Client_1_8_20173127_040C_FRENCH.cab
I'm running your newest cab (3127) and I've noticed the notification icons (at the top bar that shows battery/signal) have changed. I now get the same icon (letter envelope) for SMS's and Emails
well, the htc messaging client uses the same notification icon for mms and sms, which kinda sucks, imo. but it doesn't touch the one for email.. it doesn't even have anything to do with email..
Ok, this time I'm sure I followed pyrorob instructions step by step. I checked the About in the Messaging Client says "Version 1.8 (Build 2017.3127)".
How can I check the right DLL is installed?
By the way, after installation of the new Messaging Client the SMS were not send, so I tried starting the Messaging Client service and the SMS were send.
Does this have to be done or it is an indication that something went wrong?
Another issue is that the SMS Sending Network shows "Ask me" and I can't change that option, so I have to select the Sending Network each time.
Thanks in advance, pyrorob, in case you can help me.
Thanks for sharing!
aaamador said:
Ok, this time I'm sure I followed pyrorob instructions step by step. I checked the About in the Messaging Client says "Version 1.8 (Build 2017.3127)".
How can I check the right DLL is installed?
By the way, after installation of the new Messaging Client the SMS were not send, so I tried starting the Messaging Client service and the SMS were send.
Does this have to be done or it is an indication that something went wrong?
Another issue is that the SMS Sending Network shows "Ask me" and I can't change that option, so I have to select the Sending Network each time.
Thanks in advance, pyrorob, in case you can help me.
Click to expand...
Click to collapse
Ok, first, the about wont show you anything regarding the version of that service and even if you pulled the file out of windows and checked, theres no version number shown..
Second, it depends on if you had htc messenger pre-installed.. if it was, when you set the service to manual it doesnt load at startup so its not being used, so it will be able to be overwritten by the one in the cab.
now if its part of a htc messener client cab you installed previously, after you set it to manual, soft reset and uninstall the old one, if you go to services youll see thats its no longer there. so when you install the new one you can be absolutely sure its the newer dll (the only way it will still be there, is if it was cooked into the rom (pre-installed) in the first place)
Third, if after you install and you have the sms not sent issue its because, like you pointed out, the services is not running at startup automatically. go to services and touch and hold on messaging service and set to automatic, thats fixes that.
Fourth, ( i assume you mean mms) in htc messenger go to menu/settings/options/ then again at the bottom, menu/mms server, open up whatever mms server you have there to use, and two things, make sure the "Connect via" is set for your main data connection (the one that is used for you to access the internet) and press back, the mms settings name will be highlighted and while its highlighted go to, at the bottom, menu/ "set as default". now hit back, done and you should be done.
Now, if it still shows "ask me" ill need more information, such as what cell provider your using and what options it gives you under "ask me" also, you might want to check under start/settings/connections/"advanced network" and go to the sms service tab and see what its set for.
ugh, to be honest im not a big fan of typing long paragraphs...
but i hope this answers those questions.
pyrorob said:
Fourth, ( i assume you mean mms) in htc messenger go to menu/settings/options/ then again at the bottom, menu/mms server, open up whatever mms server you have there to use, and two things, make sure the "Connect via" is set for your main data connection (the one that is used for you to access the internet) and press back, the mms settings name will be highlighted and while its highlighted go to, at the bottom, menu/ "set as default". now hit back, done and you should be done.
Now, if it still shows "ask me" ill need more information, such as what cell provider your using and what options it gives you under "ask me" also, you might want to check under start/settings/connections/"advanced network" and go to the sms service tab and see what its set for.
Click to expand...
Click to collapse
Messaging Client version 1.8 Build 2016.xxx is pre-installed in the NhatHoa ROM I'm using, so it think the issue with the service in your new Messaging Client is completely solved.
The other issue is still there, because at the new Messaging Client Settings the "Sending Network" option is set to "Ask me" for SMS and MMS and this option is gray out so it can't be changed.
When I tried to send a SMS, the Messaging Client shows a window to select the "Sending Network" which shows three options: C - No operator, G - No operator, Cancel.
I've been selecting G - No operator and the SMS is send without problems.
By the way, my phone is connected through GSM to my cellular provider, called ICE.
What do you think pyrorob?
aaamador said:
Messaging Client version 1.8 Build 2016.xxx is pre-installed in the NhatHoa ROM I'm using, so it think the issue with the service in your new Messaging Client is completely solved.
The other issue is still there, because at the new Messaging Client Settings the "Sending Network" option is set to "Ask me" for SMS and MMS and this option is gray out so it can't be changed.
When I tried to send a SMS, the Messaging Client shows a window to select the "Sending Network" which shows three options: C - No operator, G - No operator, Cancel.
I've been selecting G - No operator and the SMS is send without problems.
By the way, my phone is connected through GSM to my cellular provider, called ICE.
What do you think pyrorob?
Click to expand...
Click to collapse
ok, i assume you have a world phone tp2? thats both cdma and gsm? cause thats what the c and the g are for..
now the only line in the reg that i could see that could relate to this issue is here: [HKEY_LOCAL_MACHINE\Software\Jataayu\Messaging\Network]
"SMSPreferredNetwork"=dword:00000002
since theres no way for me to test the values and what effect they would have you might want to try changing it to 0 or 1 and seeing what the effects are.
pyrorob said:
ok, i assume you have a world phone tp2? thats both cdma and gsm? cause thats what the c and the g are for..
now the only line in the reg that i could see that could relate to this issue is here: [HKEY_LOCAL_MACHINE\Software\Jataayu\Messaging\Network]
"SMSPreferredNetwork"=dword:00000002
since theres no way for me to test the values and what effect they would have you might want to try changing it to 0 or 1 and seeing what the effects are.
Click to expand...
Click to collapse
It worked! I found [HKEY_LOCAL_MACHINE\Software\Jataayu\Messaging\Network] "SMSPreferredNetwork" was set to 0 (dword:00000000), so I first changed to 1 and this set the "Sending Network" to CDMA at SMS Settings, so I changed to 2 and this set the "Sending Network" to GSM at SMS Settings.
I guess it will work the same on MMS, but this service is not available at my cellular provider for my phone, so there's not need to fix it.
Thanks pyrorob!
By the way. So far, on this new Messaging Client I haven't seen the weird behavior of previous builds, because its memory usage doesn't increase suddenly and for no particular reason and also its CPU usage doesn't increase suddenly and for no particular reason, too.
Actually, CPU usage seems to stay at zero when there's no messaging traffic.
aaamador said:
By the way. So far, on this new Messaging Client I haven't seen the weird behavior of previous builds, because its memory usage doesn't increase suddenly and for no particular reason and also its CPU usage doesn't increase suddenly and for no particular reason, too.
Actually, CPU usage seems to stay at zero when there's no messaging traffic.
Click to expand...
Click to collapse
cool, glad its working good.
pyrorob said:
I dont know about that bug. what is it?
Click to expand...
Click to collapse
It was a big thing with th_graf's cabs, but it seemed to me like it only affected tmous users. Every picture that was texted was just a tiny preview version, not the full size. From what I've read it wasn't fixed, just kind of not talked about now. I'm a bit cautious since I've had to hard reset a couple times because of it. I think I may have tried your first cab too, but it was a while ago I'm not sure.
slackersink said:
It was a big thing with th_graf's cabs, but it seemed to me like it only affected tmous users. Every picture that was texted was just a tiny preview version, not the full size. From what I've read it wasn't fixed, just kind of not talked about now. I'm a bit cautious since I've had to hard reset a couple times because of it. I think I may have tried your first cab too, but it was a while ago I'm not sure.
Click to expand...
Click to collapse
oh, you meant as in "5KB" as in the size of the file.. you had put down 5k which i was confused with cause it seemed like you were talking about something to do with 5000..
ok, well, using this cab, i sent myself a photo i took with the camera on my hd2, while it got sent out at 600KB (which is the size it was originally) it gets received at 72KB, which is because of tmobile. it seems while they have a maximum outgoing cap of 1024kB (i think) they resize the incoming picture for mms to under 75KB, now i have seen on other threads that this only happens to mms, if your were to send out the file to an email address using the messaging client, it would be received at the size it was originally sent at. to me it seems tmo needs to update there systems to resize to a higher size..
pyrorob said:
what was this all about? i was asleep an missed the hoopla. someone wana pm me what it said ?
Click to expand...
Click to collapse
Pyrob, you will be informed if anything regarding your work is reported or under dispute.
Till then feel free to post whatever you need too.
Madnish30.
aaamador said:
It worked! I found [HKEY_LOCAL_MACHINE\Software\Jataayu\Messaging\Network] "SMSPreferredNetwork" was set to 0 (dword:00000000), so I first changed to 1 and this set the "Sending Network" to CDMA at SMS Settings, so I changed to 2 and this set the "Sending Network" to GSM at SMS Settings.
I guess it will work the same on MMS, but this service is not available at my cellular provider for my phone, so there's not need to fix it.
Thanks pyrorob!
Click to expand...
Click to collapse
It just happened that the registry settings form "SMSPreferredNetwork" and "MMSPreferredNetwork" changed automatically back to 0, which seems to mean "Ask me".
I manually changed them back to 2, but after a while they went automatically back again to 0.
What can be happening pyrorob?
im not sure, im thinking it might be something outside of the messaging client causing that issue..
hi pyrorob
is your cab fixing the problem on Diamond2 (WVGA) SMS when in conversation mode there is many SMS ?
brunoisa10 said:
hi pyrorob
is your cab fixing the problem on Diamond2 (WVGA) SMS when in conversation mode there is many SMS ?
Click to expand...
Click to collapse
what? i dont know, i dont even know what your talking about.. try it and find out..
hi my friend do you have also :
*disable SMS Sent NotiFIcation?
*Fixed The VIP/Password Managment bug appering under "Options" in Non-Secure mode?
Cool man, this works great. thanks for the hard work!