Database Users

How do i get gprs / gsm web access on Exec?

Hi,
Probably a simple question...
When i don't have wifi access, how do i get web access via gprs/gsm?
Cheers

It should just connect you automatically when you open up PIE and enter a web address

cotc2001 said:
It should just connect you automatically when you open up PIE and enter a web address
Click to expand...
Click to collapse
It doesnt, which is a pain. i tried it last night for the first time. it just says it cant connect :-/

are you in corp mode ?

cotc2001 said:
are you in corp mode ?
Click to expand...
Click to collapse
ah, yes... i am..

try hard resetting and then install as normal and then going to programs/install types and then chooseing corporate install.
Same thing happened to me until i did that

cotc2001 said:
try hard resetting and then install as normal and then going to programs/install types and then chooseing corporate install.
Same thing happened to me until i did that
Click to expand...
Click to collapse
ack - is there no other way? Its taken me ages to get my XDA the way i want it to be... :'(

Err someone else will have to answer this one - thats just the way I did it and havent played around with it too much yet

Hey guys, I have been having major problems connecting aswell. I contacted o2 and they sent me the file below, containing step-by-step instructions but it still doesn't work. Can someone who has it working please post their settings. Thanks Euan
Below are the O2 XDA Exec GPRS WAP Pay Monthly Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Select 'Start'
2. Select 'Settings'
3. Select 'Connections'
4. Select 'Connections'
5. Under 'My Work Network' tap 'Manage existing connections', then tap edit. (If not present then tap 'Add a new modem connection)
6. The 'Select a Mode' drop down box should be set to 'Cellular Line (GPRS, 3G)
7. Tap 'Next'
8. Enter Access Point Name of 'wap.o2.co.uk'
9. Tap 'Next'
10. Type username of 'o2wap'
11. Type password of 'password'
12. Ignore 'Domain' this should be left blank
13. Tap 'Advanced'
14. On the 'TCP/IP' tab, only 'Use Server-assigned IP address' should be selected.
15. Tap the 'Servers' tab
16. Only 'Ise Server-assigned Address' should be selected.
17. Tap 'OK'
18. Tap 'Finish'
19. Tap 'Proxy Settings'
20. Tap 'Advanced'
21. Tap the 'WAP' field
22. In the Server field enter '193.113.200.195'
23. In the Port field enter '9201'
24. Tap 'OK' 4 times and exit
The GPRS WAP settings are now complete. However if you are still experiencing any issues using this service, please contact O2 Customer Services.
Once you have installed the settings into your handset and saved them, please switch off your handset and switch it back on. This will activate the settings for you.
If you are going to put your SIM card into another mobile, you will need new O2 settings. You can easily set up your new mobile to use O2 services and picture messaging. Simply visit our website @ http://www.o2.co.uk/productsservices/ota2/select/0,,184,00.html
Regards
O2 Customer Service

o2 GPRS

hi everyone
im on o2 pay as you go but when i want to use my gprs it connects but it wont load pages
i know going on internet sites such as.html etc wont work with gprs over o2 but how do i access wap sites...as it always replys with an error msg.
thanks in advance
sanj

and the error message is ....... ?

SBouri said:
hi everyone
im on o2 pay as you go but when i want to use my gprs it connects but it wont load pages
i know going on internet sites such as.html etc wont work with gprs over o2 but how do i access wap sites...as it always replys with an error msg.
thanks in advance
sanj
Click to expand...
Click to collapse
Why wont html work with GPRS or is that a PAYG limitation ?

If its a wap site the address should be started wsp://
If its a www site the address should be started with http://

O2 GRPS
What connection settings are you using for GPRS
Charlie Grillo

padlad said:
If its a wap site the address should be started wsp://
If its a www site the address should be started with http://
Click to expand...
Click to collapse
thanks mate will try the wsp address
my gprs settings are from the forum and also confirmed by o2
Below are the O2 XDA Mini S GPRS WAP Pay as you go Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Tap Start
2. Tap Settings
3. Tap the Connections tab
4. Tap the Connections icon
5. Under 'My Work Network' tap 'Manage existing connections'
6. If a connection already exists then tap ‘Edit’. If no connections are present tap 'New’
7. In the ‘Enter a name for the connection’ field enter ‘GPRS WAP’
8. The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
9. Tap 'Next'
10. In the ‘Access Point Name’ field enter ‘payandgo.o2.co.uk’
11. Tap 'Next'
12. In the ‘Username’ field enter ‘payandgo’
13. In the ‘Password’ field enter ‘password’
14. Leave the Domain field blank
15. Tap ‘Advanced’
16. In the ‘TCP/IP’ tab ensure ‘Use server-assigned IP address’ is selected
17. Tap the ‘Servers’ tab
18. Ensure the ‘Use server-assigned address is selected
19. Tap ‘OK’ in the top right corner
20. Tap 'Finish'
21. Tap 'Proxy Settings' tab
22. Ensure that 'This network connects to the Internet' box is ticked
23. Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
24. Tap 'Advanced'
25. Tap the ‘WAP’ option
26. In the 'Server’ field enter ‘193.113.200.195’
27. In the ‘Port’ field enter ‘9201’
28. Tap 'OK' four times to exit
The GPRS WAP Pay and Go settings are now complete. However if you are still experiencing any issues using this service, please contact O2 Customer Services.
Once you have installed the settings into your handset and saved them, please switch off your handset and switch it back on. This will activate the settings for you.

Can anyone just confirm for me the difference between the settings posted above and the ones designed for pay monthly customers?
Thanks
Phil

tried the wsp addy...still didnt load a page

O2 GPRS
Pay as you go cannot use O2 Active its a problem there end.
You can still use there wap site though, use this as your wap home page."wsp://wap.o2.co.uk/" .Most links work off that page.

thanks mate will give it a go

internet access using o2 PAYG on XDA II

Hi
I followed the settings from the thread below to get full internet access using my 02 payg sim
http://forum.xda-developers.com/showthread.php?t=269023&highlight=GPRS
but am still getting "page not found". I'm not even getting wap pages
can anyone tell me how to solve this. I've done a hard reset and gone from there but nothing.
I've just switched my number to o2 and don't want to have to switch again.
thanks

Here is how to setup XDA2 on o2
Xda® II Manual Setup - GPRS WAP (Prepay)
Tap Start - Settings
Tap 'Connections' tab
Tap 'Connections' icon
Under 'My Work Network' tap 'Manage existing connections'
Tap 'Edit'
The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
Tap 'Next'
Access Point Name: payandgo.o2.co.uk
Tap 'Next'
Username: payandgo
Password: password
Domain: leave blank
Tap 'Advanced'
On the 'TCP/IP' tab, only 'Use server-assigned IP address' should be selected
Tap the 'Servers' tab
Only 'Use server-assigned addresses' should be selected
Tap 'OK'
Tap 'Finish'
Tap 'Proxy Settings' tab (*Note, the soft keyboard may be hiding this tab - tap
the keyboard icon at bottom right to clear this away)
Ensure that 'This network connects to the Internet' box is ticked
Ensure that 'This network uses a proxy server to connect to the Internet' box is
ticked
Tap 'Advanced'
In the 'WAP' field (Server) enter: 193.113.200.195
In the field to the right of this (Port) enter: 9201
Tap 'OK' and exit
MMS settings:
Please remember that you will need to enter the GPRS settings before you enter
the MMS settings. We currently do not have the specific MMS settings for the O2
XDA® II. I have listed below the generic settings for MMS:
1. Profile Name - O2 MMS
2. Server URL - http://mmsc.mms.o2.co.uk: 8002
3. Gateway IP - 193.113.200.195
4. Bearer Type - select GPRS, Press Menu select Edit
5. Access Point Name - payandgo.o2.co.uk
6. User ID - payandgo
7. User Password - Password
8. Authentication - Normal

Check the following as well . . . .
http://forum.xda-developers.com/showthread.php?t=286351

o2 pay as you go
jadegirl said:
Hi
I followed the settings from the thread below to get full internet access using my 02 payg sim
http://forum.xda-developers.com/showthread.php?t=269023&highlight=GPRS
but am still getting "page not found". I'm not even getting wap pages
can anyone tell me how to solve this. I've done a hard reset and gone from there but nothing.
I've just switched my number to o2 and don't want to have to switch again.
thanks
Click to expand...
Click to collapse
Hey,
I have Nokia C3 Grey Mobile Phone on O2 Pay as You Go and when I first time connect with O2 i also have the same problem but I prefer to go with its official site and steps and they solve my problem very easily, I hope you should also follow the same here i suggest you the link http://getsettings.o2.co.uk/ServeSettingsWebApp/
Good Luck!

help setting up mobile internet (wap/gprs)

Hey guys.
Can someone help me out with this...
I had a tmobile MDA (wizard), i have since upgraded to the Kaiser. But my mum wants to use the old wizard. The wizard is already unlocked (lokiwiz yay) so i just put my mums O2 sim in the phone and it works. But things like going online won't work, i assume i need to enter some settings somewhere. (which settings and where???)
I tried ringing O2 to get the info, but they started asking what phone i had and then they said they didnt have the MDA/Wizard, and so i said a sony erricson just so that she would send info, but when i recieved the text message it was blank or at least appeared blank.
Can someone from here tell me which settings i need to enter and where.
Also i am still running the wizard on the tmobile rom (second one they made for MDA). is there a better rom for me to use.
Thanks guys.

MrPresident said:
Hey guys.
Can someone help me out with this...
I had a tmobile MDA (wizard), i have since upgraded to the Kaiser. But my mum wants to use the old wizard. The wizard is already unlocked (lokiwiz yay) so i just put my mums O2 sim in the phone and it works. But things like going online won't work, i assume i need to enter some settings somewhere. (which settings and where???)
I tried ringing O2 to get the info, but they started asking what phone i had and then they said they didnt have the MDA/Wizard, and so i said a sony erricson just so that she would send info, but when i recieved the text message it was blank or at least appeared blank.
Can someone from here tell me which settings i need to enter and where.
Also i am still running the wizard on the tmobile rom (second one they made for MDA). is there a better rom for me to use.
Thanks guys.
Click to expand...
Click to collapse
Unfortunately, the sim card controls the internet, texting, and online accesses. By putting your mom's O2 sim in your old wizard doesn't change anything. These sim cards have numbers on them to identify them with the type of device activated for. What you need to do is contact your carrier and explain to them what you said in your post, and get the sim re-activated.

Thanks for the help hotdog.
I'll ring the O2 people again and explain things. Only reason i didn't go into depth with them before was because i thought they would tell me im not allowed to use an O2 sim in an unlocked Tmobile phone.

i have the pay and go settings!!!!
heres the pay and go settings for you with guide. i hope it helps if not at least u'll be able to get the net via wap. let me know if u want the mms settings via privet message.
Below are the O2 XDA Mini S GPRS WAP Pay as you go Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Tap Start
2. Tap Settings
3. Tap the Connections tab
4. Tap the Connections icon
5. Under 'My Work Network' tap 'Manage existing connections'
6. If a connection already exists then tap ‘Edit’. If no connections are present tap 'New’
7. In the ‘Enter a name for the connection’ field enter ‘GPRS WAP’
8. The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
9. Tap 'Next'
10. In the ‘Access Point Name’ field enter ‘payandgo.o2.co.uk’
11. Tap 'Next'
12. In the ‘Username’ field enter ‘payandgo’
13. In the ‘Password’ field enter ‘password’
14. Leave the Domain field blank
15. Tap ‘Advanced’
16. In the ‘TCP/IP’ tab ensure ‘Use server-assigned IP address’ is selected
17. Tap the ‘Servers’ tab
18. Ensure the ‘Use server-assigned address is selected
19. Tap ‘OK’ in the top right corner
20. Tap 'Finish'
21. Tap 'Proxy Settings' tab
22. Ensure that 'This network connects to the Internet' box is ticked
23. Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
24. Tap 'Advanced'
25. Tap the ‘WAP’ option
26. In the 'Server’ field enter ‘193.113.200.195’
27. In the ‘Port’ field enter ‘9201’
28. Tap 'OK' four times to exit
Pay monthly settings for you
Go to [Start]
Tap [Settings]
Tap [Connections]
Under [My ISP] tap [Manage Existing Connections]
Tap [Edit]. If this is not present tap [Add a new modem connection]
The [Select a Modem] drop-down box should be set to: [Cellular Line (GPRS)]
Tap [Next]
The [Access Point Name] should be set to: mobile.o2.co.uk
Tap [Next]
The [Username] shouldbe set to: o2web
The [Password] should be set to: password
Leave [Domain] blank
Tap [Advanced]
On the [TCP/IP] tab, only [Use Server-assigned IP Address] should be selected
Tap the [Servers] tab
Select [ Use Specific Server Addresses]
DNS: 193.113.200.200
Alt DNS: 193.113.200.201
Tap [ok]
Tap [Finish]

god bless you vj4.
that worked like a charm.
thanks.

HTC HD (TIM branded) with uk O2 sim and web bolt on

First of all excuse my English, sorry if it is not the right section for posting this. I'm in London and I bought a O2 sim with the "web bolt on" option (7,50 £/month and max 200 mb). But, even if i setup my TIM (telecom italia mobile - I'm Italian) htc touch hd as the "o2 man" tell me to do, it doesn't work anymore.
The setting is this=
apn mobile.o2.co.uk
username o2web
password password
dns 193.113.200.200 /201
is it correct?
Is "web bolt on" option right for my touch hd?
What can I do?
Tnx a lot

I always refer to the following page if I'm having problems.....
http://www.filesaveas.com/gprs.html
Try mobileweb as a username.
It should work OK assuming o2 have enabled everything....

polino said:
dns 193.113.200.200 /201
is it correct?
Is "web bolt on" option right for my touch hd?
What can I do?
Tnx a lot
Click to expand...
Click to collapse
Your settings are correct. I did not input the dns I selected Use Server assigned addresses.
I think the web bolt on is the right choice if you want to be connected all the time. Mind you some apps seem to connect online or want to connect all the time. I am using a Touch Hd

Those settings are for people on o2 contracts, since you are talking about web bolt ons, you must be on pay and go. Here are the settings straight form o2 themselves.
.
*PLEASE NOTE* - All steps must be completed to ensure the settings are correctly configured.
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Tap 'Start'.
2. Tap 'Settings'.
3. Tap the 'Connections' tab.
4. Tap 'Connections'.
5. Under the 'Mobile Web' section tap 'Add a new modem connection'.
6. Enter name for connection of 'O2 Mobile Web'.
7. Select modem type, choose 'Cellular Line (GPRS , 3G).
8. Tap 'Next'.
9. Enter Access Point Name of 'payandgo.o2.co.uk'.
10. Tap 'Next'.
11. Enter the User name of 'payandgo'.
12. Enter the password of 'password'.
13. Tap 'Advanced'.
14. On the TCP/IP tab, tap 'Use server-asssigned IP address.
15. Tap the 'Servers' tab and tap 'Use specific server address'.
16. Tap on 'DNS' and enter '193.113.200.200'.
17. Tap on 'Alt DNS' and enter '193.113.200.201'.
18. Tap 'OK'.
19. Tap 'Finish'.
20. Under the 'Mobile Web' section tap 'Manage existing connections'.
21. Tap your new connection so it has a spot next to it, this will make it your active settings.
22. Tap 'OK'.