o2 GPRS - 8125, K-JAM, P4300, MDA Vario General

hi everyone
im on o2 pay as you go but when i want to use my gprs it connects but it wont load pages
i know going on internet sites such as.html etc wont work with gprs over o2 but how do i access wap sites...as it always replys with an error msg.
thanks in advance
sanj

and the error message is ....... ?

SBouri said:
hi everyone
im on o2 pay as you go but when i want to use my gprs it connects but it wont load pages
i know going on internet sites such as.html etc wont work with gprs over o2 but how do i access wap sites...as it always replys with an error msg.
thanks in advance
sanj
Click to expand...
Click to collapse
Why wont html work with GPRS or is that a PAYG limitation ?

If its a wap site the address should be started wsp://
If its a www site the address should be started with http://

O2 GRPS
What connection settings are you using for GPRS
Charlie Grillo

padlad said:
If its a wap site the address should be started wsp://
If its a www site the address should be started with http://
Click to expand...
Click to collapse
thanks mate will try the wsp address
my gprs settings are from the forum and also confirmed by o2
Below are the O2 XDA Mini S GPRS WAP Pay as you go Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Tap Start
2. Tap Settings
3. Tap the Connections tab
4. Tap the Connections icon
5. Under 'My Work Network' tap 'Manage existing connections'
6. If a connection already exists then tap ‘Edit’. If no connections are present tap 'New’
7. In the ‘Enter a name for the connection’ field enter ‘GPRS WAP’
8. The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
9. Tap 'Next'
10. In the ‘Access Point Name’ field enter ‘payandgo.o2.co.uk’
11. Tap 'Next'
12. In the ‘Username’ field enter ‘payandgo’
13. In the ‘Password’ field enter ‘password’
14. Leave the Domain field blank
15. Tap ‘Advanced’
16. In the ‘TCP/IP’ tab ensure ‘Use server-assigned IP address’ is selected
17. Tap the ‘Servers’ tab
18. Ensure the ‘Use server-assigned address is selected
19. Tap ‘OK’ in the top right corner
20. Tap 'Finish'
21. Tap 'Proxy Settings' tab
22. Ensure that 'This network connects to the Internet' box is ticked
23. Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
24. Tap 'Advanced'
25. Tap the ‘WAP’ option
26. In the 'Server’ field enter ‘193.113.200.195’
27. In the ‘Port’ field enter ‘9201’
28. Tap 'OK' four times to exit
The GPRS WAP Pay and Go settings are now complete. However if you are still experiencing any issues using this service, please contact O2 Customer Services.
Once you have installed the settings into your handset and saved them, please switch off your handset and switch it back on. This will activate the settings for you.

Can anyone just confirm for me the difference between the settings posted above and the ones designed for pay monthly customers?
Thanks
Phil

tried the wsp addy...still didnt load a page

O2 GPRS
Pay as you go cannot use O2 Active its a problem there end.
You can still use there wap site though, use this as your wap home page."wsp://wap.o2.co.uk/" .Most links work off that page.

thanks mate will give it a go

Related

How do i get gprs / gsm web access on Exec?

Hi,
Probably a simple question...
When i don't have wifi access, how do i get web access via gprs/gsm?
Cheers
It should just connect you automatically when you open up PIE and enter a web address
cotc2001 said:
It should just connect you automatically when you open up PIE and enter a web address
Click to expand...
Click to collapse
It doesnt, which is a pain. i tried it last night for the first time. it just says it cant connect :-/
are you in corp mode ?
cotc2001 said:
are you in corp mode ?
Click to expand...
Click to collapse
ah, yes... i am..
try hard resetting and then install as normal and then going to programs/install types and then chooseing corporate install.
Same thing happened to me until i did that
cotc2001 said:
try hard resetting and then install as normal and then going to programs/install types and then chooseing corporate install.
Same thing happened to me until i did that
Click to expand...
Click to collapse
ack - is there no other way? Its taken me ages to get my XDA the way i want it to be... :'(
Err someone else will have to answer this one - thats just the way I did it and havent played around with it too much yet
Hey guys, I have been having major problems connecting aswell. I contacted o2 and they sent me the file below, containing step-by-step instructions but it still doesn't work. Can someone who has it working please post their settings. Thanks Euan
Below are the O2 XDA Exec GPRS WAP Pay Monthly Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Select 'Start'
2. Select 'Settings'
3. Select 'Connections'
4. Select 'Connections'
5. Under 'My Work Network' tap 'Manage existing connections', then tap edit. (If not present then tap 'Add a new modem connection)
6. The 'Select a Mode' drop down box should be set to 'Cellular Line (GPRS, 3G)
7. Tap 'Next'
8. Enter Access Point Name of 'wap.o2.co.uk'
9. Tap 'Next'
10. Type username of 'o2wap'
11. Type password of 'password'
12. Ignore 'Domain' this should be left blank
13. Tap 'Advanced'
14. On the 'TCP/IP' tab, only 'Use Server-assigned IP address' should be selected.
15. Tap the 'Servers' tab
16. Only 'Ise Server-assigned Address' should be selected.
17. Tap 'OK'
18. Tap 'Finish'
19. Tap 'Proxy Settings'
20. Tap 'Advanced'
21. Tap the 'WAP' field
22. In the Server field enter '193.113.200.195'
23. In the Port field enter '9201'
24. Tap 'OK' 4 times and exit
The GPRS WAP settings are now complete. However if you are still experiencing any issues using this service, please contact O2 Customer Services.
Once you have installed the settings into your handset and saved them, please switch off your handset and switch it back on. This will activate the settings for you.
If you are going to put your SIM card into another mobile, you will need new O2 settings. You can easily set up your new mobile to use O2 services and picture messaging. Simply visit our website @ http://www.o2.co.uk/productsservices/ota2/select/0,,184,00.html
Regards
O2 Customer Service

Wizard O2 MMS Setting

Hello,
Is there anyone using the corporate mode and not able to send MMS ? I've been trying to change and figure the setting on my device. It seem to be not able to send MMS.
If there is someone using the corporate mode and able to send MMS please send me the configuration.
Many Thanks.
Are you using a contract line? if you are try this file. Hopefully it'll solve your problem.
Hello,
No luck, I still not able to send mms.
Are you in the corporate mode as well?
Hi Waiho,
i had this problem, what i had to do was hard reset and install it with all the O2 rubbish. I then wrote down all the details which were stored. Then hard reset in corporate mode and put the details in. Is bit lengthy but neccessary. Sorry i dont have my phone on me at the mo so can even give the details from mine.
mms disappeared
i had the problem of not seeing mms inbox because of not loading the extended rom from t Mobile.
I found out that with total commander you can go to the files in the extended rom and there i needed to execute a file called shortcut_mms1_java6xx-cv-voice-emailwiz-tmo-03nov05.cab to make it work
only need to enter the provider settings now
Hi Enervate,
Do you mind to send me the config detail ?
Thanks!
Use Basic ?
If you use the Basic setting after a hard reset (or Clear Storage) you get the MMS settings OK. Otherwise contact O2 Care and they will send you the settings.
DBo.
Hi Waiho,
ill try and post the settings tonight sometime, am at work at the mo so dont have my phone on me.
Below are the O2 XDA Mini S MMS Pay Monthly Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Select 'Start'
2. Select 'Messaging'
3. Select 'Menu'
4. Select 'MMS Configuration'
5. Select 'Servers'
6. Select 'New'
7. Type in Server name or 'O2 MMS'
8. Select 'Gateway' and type in '193.113.200.195'
9. Select 'Port number' and type in '9201'
10. Select 'Server address' and enter 'http://mmsc.mms.o2.co.uk:8002'
11. Select 'Connect via' and select 'My Work Network''
12. Click 'OK'
13. Highlight 'O2 MMS' and click on 'Set As Default'
The MMS settings are now complete. However if you are still experiencing any issues using this service, please contact O2 Customer Services.
Once you have installed the settings into your handset and saved them, please switch off your handset and switch it back on. This will activate the settings for you.
if you have hard reset in corporate mode, you will also need to enter your GPRS settings, otherwise the MMS cant dial out, ill have these for you tonight
I had them all e-mailed to me yesterday, so I have them handy. Here you go:
Below are the O2 XDA Mini S GPRS WAP Pay Monthly Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Tap Start
2. Tap Settings
3. Tap the Connections tab
4. Tap the Connections icon
5. Under 'My Work Network' tap 'Manage existing connections'
6. If a connection already exists then tap ‘Edit’. If no connections are present tap 'New’
7. In the ‘Enter a name for the connection’ field enter ‘GPRS WAP’
8. The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
9. Tap 'Next'
10. In the ‘Access Point Name’ field enter ‘wap.o2.co.uk’
11. Tap 'Next'
12. In the ‘Username’ field enter ‘o2wap’
13. In the ‘Password’ field enter ‘password’
14. Leave the Domain field blank
15. Tap ‘Advanced’
16. In the ‘TCP/IP’ tab ensure ‘Use server-assigned IP address’ is selected
17. Tap the ‘Servers’ tab
18. Ensure the ‘Use server-assigned address is selected
19. Tap ‘OK’ in the top right corner
20. Tap 'Finish'
21. Tap 'Proxy Settings' tab
22. Ensure that 'This network connects to the Internet' box is ticked
23. Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
24. Tap 'Advanced'
25. Tap the ‘WAP’ option
26. In the 'Server’ field enter ‘193.113.200.195’
27. In the ‘Port’ field enter ‘9201’
28. Tap 'OK' four times to exit
The GPRS WAP Pay Monthly settings are now complete. However if you are still experiencing any issues using this service, please contact O2 Customer Services.
Once you have installed the settings into your handset and saved them, please switch off your handset and switch it back on. This will activate the settings for you.
street_hawk said:
I had them all e-mailed to me yesterday, so I have them handy. Here you go:
Below are the O2 XDA Mini S GPRS WAP Pay Monthly Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Tap Start
2. Tap Settings
3. Tap the Connections tab
4. Tap the Connections icon
5. Under 'My Work Network' tap 'Manage existing connections'
6. If a connection already exists then tap ‘Edit’. If no connections are present tap 'New’
7. In the ‘Enter a name for the connection’ field enter ‘GPRS WAP’
8. The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
9. Tap 'Next'
10. In the ‘Access Point Name’ field enter ‘wap.o2.co.uk’
11. Tap 'Next'
12. In the ‘Username’ field enter ‘o2wap’
13. In the ‘Password’ field enter ‘password’
14. Leave the Domain field blank
15. Tap ‘Advanced’
16. In the ‘TCP/IP’ tab ensure ‘Use server-assigned IP address’ is selected
17. Tap the ‘Servers’ tab
18. Ensure the ‘Use server-assigned address is selected
19. Tap ‘OK’ in the top right corner
20. Tap 'Finish'
21. Tap 'Proxy Settings' tab
22. Ensure that 'This network connects to the Internet' box is ticked
23. Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
24. Tap 'Advanced'
25. Tap the ‘WAP’ option
26. In the 'Server’ field enter ‘193.113.200.195’
27. In the ‘Port’ field enter ‘9201’
28. Tap 'OK' four times to exit
The GPRS WAP Pay Monthly settings are now complete. However if you are still experiencing any issues using this service, please contact O2 Customer Services.
Once you have installed the settings into your handset and saved them, please switch off your handset and switch it back on. This will activate the settings for you.
Click to expand...
Click to collapse
Thanks For the Information.
I have the exactly setting like above.
The only different make my device able to send MMS is remove :8002 port at the [MMS configuration] but im not able to receive my MMS without putting the port back.
Is really strange.
Guys really thanks for the help....
Is there any other way?
Can Someone post the O2 MMS CAB files ? My MMS INBOX IS not there after I have upgrade.
Thanks.
Has anyone got the settings for pay as you go i can't connect to the internet with my settings. :?
Thanks.

o2 GPRS Setup

for some reason i cant get the following method to work on my MDA Vario?? when i try to connect in internet explorer is comes up with unkwon application...
1. Tap Start
2. Tap Settings
3. Tap the Connections tab
4. Tap the Connections icon
5. Under 'My Work Network' tap 'Manage existing connections'
6. If a connection already exists then tap Edit. If no connections are present tap 'New
7. In the Enter a name for the connection field enter GPRS WAP
8. The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
9. Tap 'Next'
10. In the Access Point Name field enter payandgo.o2.co.uk
11. Tap 'Next'
12. In the Username field enter payandgo
13. In the Password field enter password
14. Leave the Domain field blank
15. Tap Advanced
16. In the TCP/IP tab ensure Use server-assigned IP address is selected
17. Tap the Servers tab
18. Ensure the Use server-assigned address is selected
19. Tap OK in the top right corner
20. Tap 'Finish'
21. Tap 'Proxy Settings' tab
22. Ensure that 'This network connects to the Internet' box is ticked
23. Ensure that 'This network uses a proxy server to connect to the Internet' box is
ticked
24. Tap 'Advanced'
25. Tap the WAP option
26. In the 'Server field enter 193.113.200.195
27. In the Port field enter 9201
28. Tap 'OK' four times to exit
Appreciate your effort, but next time do a search first
http://forum.xda-developers.com/viewtopic.php?t=48186&highlight=
http://forum.xda-developers.com/viewtopic.php?t=13861&highlight=
got it working mate. thanks
I have followed these instructions carefully, setting up the "work connection" as instructed. This works to give me internet access - good.
But it doesn't give me email access over GPRS. If I try to use email I get the "cannot connect with the current connection settings" error message.
Does email access expects to use "my ISP" instead of "work connection"? Does anyone have a solution to this?
Julian
PS Agile Messenger also fails to work with these GPRS settings.
A nice man at O2 data support just answered my question fully:
The "work connection" settings should be wap.o2.co.uk, o2wap/password with proxy settings 193.113.200.195 (WAP port 9201).
The "my ISP" settings should be mobile.o2.co.uk, o2web/password, and DNS 192.113.200.200/192.113.200.201.
Now I've set both these up correctly GPRS access now works as I would hope - both email and web access nice and fast.
The man also confirmed that wifi takes precedence over GPRS - if you have a wifi connection that will be used, with a GPRS connection being made only if a wifi one is not in place.
Julian happy again

internet access using o2 PAYG on XDA II

Hi
I followed the settings from the thread below to get full internet access using my 02 payg sim
http://forum.xda-developers.com/showthread.php?t=269023&highlight=GPRS
but am still getting "page not found". I'm not even getting wap pages
can anyone tell me how to solve this. I've done a hard reset and gone from there but nothing.
I've just switched my number to o2 and don't want to have to switch again.
thanks
Here is how to setup XDA2 on o2
Xda® II Manual Setup - GPRS WAP (Prepay)
Tap Start - Settings
Tap 'Connections' tab
Tap 'Connections' icon
Under 'My Work Network' tap 'Manage existing connections'
Tap 'Edit'
The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
Tap 'Next'
Access Point Name: payandgo.o2.co.uk
Tap 'Next'
Username: payandgo
Password: password
Domain: leave blank
Tap 'Advanced'
On the 'TCP/IP' tab, only 'Use server-assigned IP address' should be selected
Tap the 'Servers' tab
Only 'Use server-assigned addresses' should be selected
Tap 'OK'
Tap 'Finish'
Tap 'Proxy Settings' tab (*Note, the soft keyboard may be hiding this tab - tap
the keyboard icon at bottom right to clear this away)
Ensure that 'This network connects to the Internet' box is ticked
Ensure that 'This network uses a proxy server to connect to the Internet' box is
ticked
Tap 'Advanced'
In the 'WAP' field (Server) enter: 193.113.200.195
In the field to the right of this (Port) enter: 9201
Tap 'OK' and exit
MMS settings:
Please remember that you will need to enter the GPRS settings before you enter
the MMS settings. We currently do not have the specific MMS settings for the O2
XDA® II. I have listed below the generic settings for MMS:
1. Profile Name - O2 MMS
2. Server URL - http://mmsc.mms.o2.co.uk: 8002
3. Gateway IP - 193.113.200.195
4. Bearer Type - select GPRS, Press Menu select Edit
5. Access Point Name - payandgo.o2.co.uk
6. User ID - payandgo
7. User Password - Password
8. Authentication - Normal
Check the following as well . . . .
http://forum.xda-developers.com/showthread.php?t=286351
o2 pay as you go
jadegirl said:
Hi
I followed the settings from the thread below to get full internet access using my 02 payg sim
http://forum.xda-developers.com/showthread.php?t=269023&highlight=GPRS
but am still getting "page not found". I'm not even getting wap pages
can anyone tell me how to solve this. I've done a hard reset and gone from there but nothing.
I've just switched my number to o2 and don't want to have to switch again.
thanks
Click to expand...
Click to collapse
Hey,
I have Nokia C3 Grey Mobile Phone on O2 Pay as You Go and when I first time connect with O2 i also have the same problem but I prefer to go with its official site and steps and they solve my problem very easily, I hope you should also follow the same here i suggest you the link http://getsettings.o2.co.uk/ServeSettingsWebApp/
Good Luck!

HTC HD (TIM branded) with uk O2 sim and web bolt on

First of all excuse my English, sorry if it is not the right section for posting this. I'm in London and I bought a O2 sim with the "web bolt on" option (7,50 £/month and max 200 mb). But, even if i setup my TIM (telecom italia mobile - I'm Italian) htc touch hd as the "o2 man" tell me to do, it doesn't work anymore.
The setting is this=
apn mobile.o2.co.uk
username o2web
password password
dns 193.113.200.200 /201
is it correct?
Is "web bolt on" option right for my touch hd?
What can I do?
Tnx a lot
I always refer to the following page if I'm having problems.....
http://www.filesaveas.com/gprs.html
Try mobileweb as a username.
It should work OK assuming o2 have enabled everything....
polino said:
dns 193.113.200.200 /201
is it correct?
Is "web bolt on" option right for my touch hd?
What can I do?
Tnx a lot
Click to expand...
Click to collapse
Your settings are correct. I did not input the dns I selected Use Server assigned addresses.
I think the web bolt on is the right choice if you want to be connected all the time. Mind you some apps seem to connect online or want to connect all the time. I am using a Touch Hd
Those settings are for people on o2 contracts, since you are talking about web bolt ons, you must be on pay and go. Here are the settings straight form o2 themselves.
.
*PLEASE NOTE* - All steps must be completed to ensure the settings are correctly configured.
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Tap 'Start'.
2. Tap 'Settings'.
3. Tap the 'Connections' tab.
4. Tap 'Connections'.
5. Under the 'Mobile Web' section tap 'Add a new modem connection'.
6. Enter name for connection of 'O2 Mobile Web'.
7. Select modem type, choose 'Cellular Line (GPRS , 3G).
8. Tap 'Next'.
9. Enter Access Point Name of 'payandgo.o2.co.uk'.
10. Tap 'Next'.
11. Enter the User name of 'payandgo'.
12. Enter the password of 'password'.
13. Tap 'Advanced'.
14. On the TCP/IP tab, tap 'Use server-asssigned IP address.
15. Tap the 'Servers' tab and tap 'Use specific server address'.
16. Tap on 'DNS' and enter '193.113.200.200'.
17. Tap on 'Alt DNS' and enter '193.113.200.201'.
18. Tap 'OK'.
19. Tap 'Finish'.
20. Under the 'Mobile Web' section tap 'Manage existing connections'.
21. Tap your new connection so it has a spot next to it, this will make it your active settings.
22. Tap 'OK'.

Categories

Resources