Database Users

Wizard O2 MMS Setting

Hello,
Is there anyone using the corporate mode and not able to send MMS ? I've been trying to change and figure the setting on my device. It seem to be not able to send MMS.
If there is someone using the corporate mode and able to send MMS please send me the configuration.
Many Thanks.

Are you using a contract line? if you are try this file. Hopefully it'll solve your problem.

Hello,
No luck, I still not able to send mms.
Are you in the corporate mode as well?

Hi Waiho,
i had this problem, what i had to do was hard reset and install it with all the O2 rubbish. I then wrote down all the details which were stored. Then hard reset in corporate mode and put the details in. Is bit lengthy but neccessary. Sorry i dont have my phone on me at the mo so can even give the details from mine.

mms disappeared
i had the problem of not seeing mms inbox because of not loading the extended rom from t Mobile.
I found out that with total commander you can go to the files in the extended rom and there i needed to execute a file called shortcut_mms1_java6xx-cv-voice-emailwiz-tmo-03nov05.cab to make it work
only need to enter the provider settings now

Hi Enervate,
Do you mind to send me the config detail ?
Thanks!

Use Basic ?
If you use the Basic setting after a hard reset (or Clear Storage) you get the MMS settings OK. Otherwise contact O2 Care and they will send you the settings.
DBo.

Hi Waiho,
ill try and post the settings tonight sometime, am at work at the mo so dont have my phone on me.

Below are the O2 XDA Mini S MMS Pay Monthly Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Select 'Start'
2. Select 'Messaging'
3. Select 'Menu'
4. Select 'MMS Configuration'
5. Select 'Servers'
6. Select 'New'
7. Type in Server name or 'O2 MMS'
8. Select 'Gateway' and type in '193.113.200.195'
9. Select 'Port number' and type in '9201'
10. Select 'Server address' and enter 'http://mmsc.mms.o2.co.uk:8002'
11. Select 'Connect via' and select 'My Work Network''
12. Click 'OK'
13. Highlight 'O2 MMS' and click on 'Set As Default'
The MMS settings are now complete. However if you are still experiencing any issues using this service, please contact O2 Customer Services.
Once you have installed the settings into your handset and saved them, please switch off your handset and switch it back on. This will activate the settings for you.

if you have hard reset in corporate mode, you will also need to enter your GPRS settings, otherwise the MMS cant dial out, ill have these for you tonight

I had them all e-mailed to me yesterday, so I have them handy. Here you go:
Below are the O2 XDA Mini S GPRS WAP Pay Monthly Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Tap Start
2. Tap Settings
3. Tap the Connections tab
4. Tap the Connections icon
5. Under 'My Work Network' tap 'Manage existing connections'
6. If a connection already exists then tap ‘Edit’. If no connections are present tap 'New’
7. In the ‘Enter a name for the connection’ field enter ‘GPRS WAP’
8. The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
9. Tap 'Next'
10. In the ‘Access Point Name’ field enter ‘wap.o2.co.uk’
11. Tap 'Next'
12. In the ‘Username’ field enter ‘o2wap’
13. In the ‘Password’ field enter ‘password’
14. Leave the Domain field blank
15. Tap ‘Advanced’
16. In the ‘TCP/IP’ tab ensure ‘Use server-assigned IP address’ is selected
17. Tap the ‘Servers’ tab
18. Ensure the ‘Use server-assigned address is selected
19. Tap ‘OK’ in the top right corner
20. Tap 'Finish'
21. Tap 'Proxy Settings' tab
22. Ensure that 'This network connects to the Internet' box is ticked
23. Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
24. Tap 'Advanced'
25. Tap the ‘WAP’ option
26. In the 'Server’ field enter ‘193.113.200.195’
27. In the ‘Port’ field enter ‘9201’
28. Tap 'OK' four times to exit
The GPRS WAP Pay Monthly settings are now complete. However if you are still experiencing any issues using this service, please contact O2 Customer Services.
Once you have installed the settings into your handset and saved them, please switch off your handset and switch it back on. This will activate the settings for you.

street_hawk said:
I had them all e-mailed to me yesterday, so I have them handy. Here you go:
Below are the O2 XDA Mini S GPRS WAP Pay Monthly Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Tap Start
2. Tap Settings
3. Tap the Connections tab
4. Tap the Connections icon
5. Under 'My Work Network' tap 'Manage existing connections'
6. If a connection already exists then tap ‘Edit’. If no connections are present tap 'New’
7. In the ‘Enter a name for the connection’ field enter ‘GPRS WAP’
8. The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
9. Tap 'Next'
10. In the ‘Access Point Name’ field enter ‘wap.o2.co.uk’
11. Tap 'Next'
12. In the ‘Username’ field enter ‘o2wap’
13. In the ‘Password’ field enter ‘password’
14. Leave the Domain field blank
15. Tap ‘Advanced’
16. In the ‘TCP/IP’ tab ensure ‘Use server-assigned IP address’ is selected
17. Tap the ‘Servers’ tab
18. Ensure the ‘Use server-assigned address is selected
19. Tap ‘OK’ in the top right corner
20. Tap 'Finish'
21. Tap 'Proxy Settings' tab
22. Ensure that 'This network connects to the Internet' box is ticked
23. Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
24. Tap 'Advanced'
25. Tap the ‘WAP’ option
26. In the 'Server’ field enter ‘193.113.200.195’
27. In the ‘Port’ field enter ‘9201’
28. Tap 'OK' four times to exit
The GPRS WAP Pay Monthly settings are now complete. However if you are still experiencing any issues using this service, please contact O2 Customer Services.
Once you have installed the settings into your handset and saved them, please switch off your handset and switch it back on. This will activate the settings for you.
Click to expand...
Click to collapse
Thanks For the Information.
I have the exactly setting like above.
The only different make my device able to send MMS is remove :8002 port at the [MMS configuration] but im not able to receive my MMS without putting the port back.
Is really strange.
Guys really thanks for the help....
Is there any other way?

Can Someone post the O2 MMS CAB files ? My MMS INBOX IS not there after I have upgrade.
Thanks.

Has anyone got the settings for pay as you go i can't connect to the internet with my settings. :?
Thanks.

How to send mms o2 xda mini s

Hey could anyone please tell me how to send mms on the o2 xda mini s. I think iv got the settings correct but every time I try to send it just saves to the out box

Talk to your customer services people... its possible mms is not active for your number...
You might try talking to the tech support team if possible.... they might check the settings on your xda

Thanks bud. il give them a ring.

all the settings can be found on filesaveas.com
depends whether you are contract or payg. I think all new sims accounts are mms enabled. It took me a little while to get my payg sim to send mms in the mini s but found a walkthru on the expansys board in the end
http://www.expansys.com/forumthread.asp?code=129999&thread=27
the problem is you need to set up your gprs wap connection 1st then point the mms connection to use this wap connection to send/receive. I think thats the case anyway. If you have any probs let me know and i'll try to take you thru all my settings.

Im having the same problems.
I have phoned them 3 times asking what the problem was and they kept trying to tell me it was my settings, until one day they said they hadnt set itup on my account. They trhen said it would take 24hours .... that was 3 days ago !!!
Anyhoo, they sent me these emails wit hthe settings required for the CONTRACT settings :
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
Code:
Below are the O2 XDA Mini S MMS Pay Monthly Settings
1. Select 'Start'
2. Select 'Messaging'
3. Select 'Menu'
4. Select 'MMS Configuration'
5. Select 'Servers'
6. Select 'New'
7. Type in Server name or 'O2 MMS'
8. Select 'Gateway' and type in '193.113.200.195'
9. Select 'Port number' and type in '9201'
10. Select 'Server address' and enter 'http://mmsc.mms.o2.co.uk:8002'
11. Select 'Connect via' and select 'My Work Network''
12. Click 'OK'
13. Highlight 'O2 MMS' and click on 'Set As Default'
Code:
Below are the O2 XDA Mini S GPRS WAP Pay Monthly Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Tap Start
2. Tap Settings
3. Tap the Connections tab
4. Tap the Connections icon
5. Under 'My Work Network' tap 'Manage existing connections'
6. If a connection already exists then tap ‘Edit’. If no connections are present tap 'New’
7. In the ‘Enter a name for the connection’ field enter ‘GPRS WAP’
8. The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
9. Tap 'Next'
10. In the ‘Access Point Name’ field enter ‘wap.o2.co.uk’
11. Tap 'Next'
12. In the ‘Username’ field enter ‘o2wap’
13. In the ‘Password’ field enter ‘password’
14. Leave the Domain field blank
15. Tap ‘Advanced’
16. In the ‘TCP/IP’ tab ensure ‘Use server-assigned IP address’ is selected
17. Tap the ‘Servers’ tab
18. Ensure the ‘Use server-assigned address is selected
19. Tap ‘OK’ in the top right corner
20. Tap 'Finish'
21. Tap 'Proxy Settings' tab
22. Ensure that 'This network connects to the Internet' box is ticked
23. Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
24. Tap 'Advanced'
25. Tap the ‘WAP’ option
26. In the 'Server’ field enter ‘193.113.200.195’
27. In the ‘Port’ field enter ‘9201’
28. Tap 'OK' four times to exit
HTH

cool! thanks for the help!

o2 GPRS

hi everyone
im on o2 pay as you go but when i want to use my gprs it connects but it wont load pages
i know going on internet sites such as.html etc wont work with gprs over o2 but how do i access wap sites...as it always replys with an error msg.
thanks in advance
sanj

and the error message is ....... ?

SBouri said:
hi everyone
im on o2 pay as you go but when i want to use my gprs it connects but it wont load pages
i know going on internet sites such as.html etc wont work with gprs over o2 but how do i access wap sites...as it always replys with an error msg.
thanks in advance
sanj
Click to expand...
Click to collapse
Why wont html work with GPRS or is that a PAYG limitation ?

If its a wap site the address should be started wsp://
If its a www site the address should be started with http://

O2 GRPS
What connection settings are you using for GPRS
Charlie Grillo

padlad said:
If its a wap site the address should be started wsp://
If its a www site the address should be started with http://
Click to expand...
Click to collapse
thanks mate will try the wsp address
my gprs settings are from the forum and also confirmed by o2
Below are the O2 XDA Mini S GPRS WAP Pay as you go Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Tap Start
2. Tap Settings
3. Tap the Connections tab
4. Tap the Connections icon
5. Under 'My Work Network' tap 'Manage existing connections'
6. If a connection already exists then tap ‘Edit’. If no connections are present tap 'New’
7. In the ‘Enter a name for the connection’ field enter ‘GPRS WAP’
8. The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
9. Tap 'Next'
10. In the ‘Access Point Name’ field enter ‘payandgo.o2.co.uk’
11. Tap 'Next'
12. In the ‘Username’ field enter ‘payandgo’
13. In the ‘Password’ field enter ‘password’
14. Leave the Domain field blank
15. Tap ‘Advanced’
16. In the ‘TCP/IP’ tab ensure ‘Use server-assigned IP address’ is selected
17. Tap the ‘Servers’ tab
18. Ensure the ‘Use server-assigned address is selected
19. Tap ‘OK’ in the top right corner
20. Tap 'Finish'
21. Tap 'Proxy Settings' tab
22. Ensure that 'This network connects to the Internet' box is ticked
23. Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
24. Tap 'Advanced'
25. Tap the ‘WAP’ option
26. In the 'Server’ field enter ‘193.113.200.195’
27. In the ‘Port’ field enter ‘9201’
28. Tap 'OK' four times to exit
The GPRS WAP Pay and Go settings are now complete. However if you are still experiencing any issues using this service, please contact O2 Customer Services.
Once you have installed the settings into your handset and saved them, please switch off your handset and switch it back on. This will activate the settings for you.

Can anyone just confirm for me the difference between the settings posted above and the ones designed for pay monthly customers?
Thanks
Phil

tried the wsp addy...still didnt load a page

O2 GPRS
Pay as you go cannot use O2 Active its a problem there end.
You can still use there wap site though, use this as your wap home page."wsp://wap.o2.co.uk/" .Most links work off that page.

thanks mate will give it a go

internet access using o2 PAYG on XDA II

Hi
I followed the settings from the thread below to get full internet access using my 02 payg sim
http://forum.xda-developers.com/showthread.php?t=269023&highlight=GPRS
but am still getting "page not found". I'm not even getting wap pages
can anyone tell me how to solve this. I've done a hard reset and gone from there but nothing.
I've just switched my number to o2 and don't want to have to switch again.
thanks

Here is how to setup XDA2 on o2
Xda® II Manual Setup - GPRS WAP (Prepay)
Tap Start - Settings
Tap 'Connections' tab
Tap 'Connections' icon
Under 'My Work Network' tap 'Manage existing connections'
Tap 'Edit'
The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
Tap 'Next'
Access Point Name: payandgo.o2.co.uk
Tap 'Next'
Username: payandgo
Password: password
Domain: leave blank
Tap 'Advanced'
On the 'TCP/IP' tab, only 'Use server-assigned IP address' should be selected
Tap the 'Servers' tab
Only 'Use server-assigned addresses' should be selected
Tap 'OK'
Tap 'Finish'
Tap 'Proxy Settings' tab (*Note, the soft keyboard may be hiding this tab - tap
the keyboard icon at bottom right to clear this away)
Ensure that 'This network connects to the Internet' box is ticked
Ensure that 'This network uses a proxy server to connect to the Internet' box is
ticked
Tap 'Advanced'
In the 'WAP' field (Server) enter: 193.113.200.195
In the field to the right of this (Port) enter: 9201
Tap 'OK' and exit
MMS settings:
Please remember that you will need to enter the GPRS settings before you enter
the MMS settings. We currently do not have the specific MMS settings for the O2
XDA® II. I have listed below the generic settings for MMS:
1. Profile Name - O2 MMS
2. Server URL - http://mmsc.mms.o2.co.uk: 8002
3. Gateway IP - 193.113.200.195
4. Bearer Type - select GPRS, Press Menu select Edit
5. Access Point Name - payandgo.o2.co.uk
6. User ID - payandgo
7. User Password - Password
8. Authentication - Normal

Check the following as well . . . .
http://forum.xda-developers.com/showthread.php?t=286351

o2 pay as you go
jadegirl said:
Hi
I followed the settings from the thread below to get full internet access using my 02 payg sim
http://forum.xda-developers.com/showthread.php?t=269023&highlight=GPRS
but am still getting "page not found". I'm not even getting wap pages
can anyone tell me how to solve this. I've done a hard reset and gone from there but nothing.
I've just switched my number to o2 and don't want to have to switch again.
thanks
Click to expand...
Click to collapse
Hey,
I have Nokia C3 Grey Mobile Phone on O2 Pay as You Go and when I first time connect with O2 i also have the same problem but I prefer to go with its official site and steps and they solve my problem very easily, I hope you should also follow the same here i suggest you the link http://getsettings.o2.co.uk/ServeSettingsWebApp/
Good Luck!

Virgin 3G Settings

Virgin 3G settings
1. On the handset, tap on Start.
2. Tap on Settings.
3. Tap on Connections tab.
4. Tap on the Connections icon.
5. Tap on Add a new modem connection under My Work Network.
6. Enter Virgin 3G in the Enter a name for the connection field.
7. Select Cellular Line (GPRS) in the drop down list of Select a modem.
8. Tap on Next.
9. Enter goto.virginmobile.uk in the Access point name field. Tap on Next.
10. Enter user in the User name field.
11. Enter in the Password field.
12. Tap Advanced...
13. Select Use server-assigned IP address. Tap on ok.
14. Tap on Finish.
15. Tap on Set up my proxy server or Edit my proxy server if one exists, under My Work Network.
16. Ensure that checkboxes of This network connects to the Internet and This network uses a proxy server to connect to the Internet are checked.
17. Tap on Advanced...
18. Tap on HTTP.
19. Enter 193.030.166.004 in the Server field.
20. Enter 8080 in the Port field.
21. Tap on ok 4 times and close the window to return to the main screen