Related
I noticed the first scratch on the corner of my Jam today. Since electronics always take the most abuse on the corners, I devised a quick and easy way to protect the corners of my Jam while I'm in Europe for the next 3 weeks. Take electrical tape or clear satin tape and place a piece over the corners. Works best if you cut a slit in the tape so you can fold it around the corner without wrinkles. In all probability the device will land on its corners if dropped or take the most abuse on the corners if scraped against something. Thus, problem solved; I did it to my digital camera too. It doesn't look half bad on either device, and if you can't stand the black corners, just use clear tape. Any tape works as long as the adhesive won't stick to the advice after you remove the tape.
damn that's dead sexy :lol:
Damn! Why didn't I think of that????
Why don't you run the tape all the way round? I think it will look somewhat better!... :wink:
I'm sorry, but that has to be the stupidest looking thing I've seen in a long time. Why don't you just get a silicon case for about $10 off of EBAY? I mean, if you REALLY need electrical tape and that's all you can find...great. But just get a cheap latex or silicon case such as the ones from JavoEdge.com.
Do you put electrical tape on the front and rear bumper of your car too?
GHETTOOOOOOO
Just curious, what specifically do you expect to happen in Europe over the next three weeks that would necessitate such a precaution when you don't prepare against similar risks at home :wink: ?
hehehehe... Good point JPreston!!! :lol:
I don't get it! People seem to get very upset when they discover they scratched the ball mirror on the back of their JAM. Now we have a JAM covered in electrical tape. Should we all carry our devices in the original box? Or better yet never use them to keep them in pristine condition? I am not saying I didn't get a little ticked off when I found a nice big scratch in the corner after a small drop but come on! I think we're all getting a bit too precious. Anyway, to each their own.
Of far more concern is the gunk that gets on the screen from my face every time I hold the JAM to my head! I mean yuck! What the heck is up with that? Is there that much oil on my face??? I just washed it! I gave my phone to my friend the other day to make a call and his face left some sort of super oil on the screen that wouldn't scrub off for several minutes! Its gross and embarassing! I think we need some sort of face oil protector!
Does anybody have any idea for cheap screen protection? I think the prices are outrageous for the slices of film sold as protectors.
I use the cheapest of them all...
They are made for Palm devices and are sold on flea markets or "One Dollar" stores... :lol:
They cost $1 dollar the 12 Pack!
Just cut them to size and go!
scratch? i've droped my mini 2 times and got 3 dent edges. damn sad. The stupid casing they gave me is getting pretty loose. I put it on my belt.... so everytime i knock it seems that pouch just flings out. The screw and the plastic seems to have worn off.
I think i'm gonna go to a skinning shop to hide the dent edges.
try to buy a leather case for Nokia 7610. it fits.
You dont use that in the box lether case. It will easily fall of that tiny hook.
Wit the lether case of Nokia, it is mounted sideway into the belt by a leather that is sewed.
mine has never fallen. Even if it falls off the belt when you undress, the leather case is so stiff that it will not dent the mini.
@Emil...
Can you post a picture of your JAM in the Nokia case for us to see?
vmirage said:
scratch? i've droped my mini 2 times and got 3 dent edges. damn sad. The stupid casing they gave me is getting pretty loose. I put it on my belt.... so everytime i knock it seems that pouch just flings out. The screw and the plastic seems to have worn off.
I think i'm gonna go to a skinning shop to hide the dent edges.
Click to expand...
Click to collapse
Dropped mine on a concrete floor from about 1.5 meters and got a really ugly dent on one of the corners of the battery cover. The cover wouldn't even go back on!
Easy fixed though. Just took a plastic pen and pushed the dent out from the inside. It still shows a slight dent and small scratches if you look closely, but what the heck...
Anyone know of any metallic paint (model, SKU, UPC code) that I could use on my JAM? I rarely put on my seatbelt, and the one time that I decide to play safe, I scratch up the corner of my JAM. I'd never go "ghetto" as one person put it in the thread, but I'm sure there's something out there to match it up. Any ideas?
Get the jam off of your belt and put it in a proper car holder and you will not only protect it from getting scratches from your seatbelt, you will also get it charged while driving. And also one less reason not to wear a seatbelt that could save your life in the case of an accident.
Incidentally, can anyone recommend a decent car kit for the JAM? I want one I can mount with some amount of ease somewhere on the console... I don't like those ones that stick on the windscreen.
elyl said:
Incidentally, can anyone recommend a decent car kit for the JAM? I want one I can mount with some amount of ease somewhere on the console... I don't like those ones that stick on the windscreen.
Click to expand...
Click to collapse
www.brodit.com
Just don't order it from Expansys as all their product descriptions for Brodit are messed up. Does anyone know where else to buy Brodit because I still need the mounting clip for my car (Expansys kept sending the wrong one). Can you buy from them (Brodit) directly?
Thanks.
Hey who has drop there 8125.. i kinda did from a foot off the ground.. It was soooo perfect. Now im mad. I wouldnt consider the scratch big but i like my stuff pretty much perfect. What about u guys?
Dropped mine from the second floor down the stairs. Broke completely and I'm pretty upset now
MAN
I feel sooooo bad.. and i thought i had it bad.. did u get a replacement or another phone?
I will file a case with my insurance company - I doubt that they will cover it, but you never know...
Was chasing the FedEx truck, don't ask why. I had it in the case that came with the 8125 which leaves the corners exposed. It unclipped and dropped on the cement sidewalk, the corner near the volume control is mashed in and two other corners are pretty scraped up the screen is fine because it was inside the case.
Ironically, if that FedEx guy didn't make me chase after him I would've gotten my activecase and anti-glare screen protector.
Thankfully after putting on the activecase not so much of the scratches can be noticed or felt.
i actually dropped mine for the first time today... i was about to sit down and i was putting it back into its case, and it fell (maybe 2 feet)... but the case cushened the blow. good thing
Wow
Man i drop my today UNPROTECTED.. man i cant believe.. it was soo clean and now it is.. Im soo mad also
Several times.... :shock:
no major malfunctions yet, but lots of chipped paint.
I dropped mine in the street getting out of a car because I had it in my hooded sweater pocket like a big dummy. It sounded like it broke in half or something (found out later it was the stylus ejecting), but nothing really happened to it besides a few corner scratches that aren't noticeable.
Sorry to hear about your drops and losses!
Does the Activecase for the 8125 have a flip cover for the screen?
Yeah the activecase covers both the back and the front so you can slide it out without altering the case. It uses hinges to cling on but I figured if I used the hinges it would loosen the front from the back so I cut off the hinges and used double sided tape to stick it to my phone. :lol:
Droped 2 time by my baby. . . she really likes my wizard. but my baby is more important than my wizard hehe.. rather have a lot of scratch on my wizard than a tiny one on my baby girl :lol:
Huyhuy said:
It uses hinges to cling on but I figured if I used the hinges it would loosen the front from the back so I cut off the hinges and used double sided tape to stick it to my phone. :lol:
Click to expand...
Click to collapse
I don't use the keyboard much on my 8125, so that part of the case that allows for keyboard use would not influence my decision to purchase or not.
What I'm really after is to know if there is a flip lid that covers the screen, and whether or not it can be opened without disengaging the entire front portion of the case from the front half of the phone.
Thanks again!
Oop
i used the carrying case that came with it but i might stich some cousion stuff where the case leaves the edges exposed
had my 8125 for about 2 weeks then when i was getting out my 66 bronco i forgot i had it in my lap and it took a dive for the pavement luckly no major defects from it just a few chips outa the keyboard side.
magnamar said:
had my 8125 for about 2 weeks then when i was getting out my 66 bronco i forgot i had it in my lap and it took a dive for the pavement luckly no major defects from it just a few chips outa the keyboard side.
Click to expand...
Click to collapse
man im sorry to hear that.. ugh i hate that i droped my phone but i kinda gotten over it
While closing the door it slipped and landed right on the topleft corner. Result was a crack in the screen topfleft to right bottom.
Of course this wasn't covered by warrenty and it cost me about 150 euros to get it fixed.
So when you drop it, try to drop it so it fall flat on it back
/Cacti
OUCH!
wow that is expenisve.. i tho i dont kno how much that is in US dollers i know that expensive.. i dont even think i could pay for that just to be replaced
Not only did i drop it, but kicked it just after... i freakin' drop-kicked it!
Was walking under a busy Moscow street and had my hands full when I received a call. I tried to answer the call while still walking and in true dork form, fumbled, dropping it as my foot came forward at the same moment and ended up kicking it another few meters.
upper corners were a little scratched, and the 2GB SD fell out, but I picked them both up, wiped it off, inserted the SD back in and it works great.
guess i lucked out!
Dropped mine multiple times. Stock case was useless. The alum case I have from BoxWave is equally useless. Damn thing flies open way too easy. And, my 8125 has therefore taken several spills.
So far, my personal best was when I essentially threw it about 7 or 8 feet from a height of about 3 1/2 feet onto concrete. It "shattered" in that the stylus came out, battery, sim, and all that came out. A couple of more dents and scratches in the case, but the display itself is fine. I do have a screen protector on it, and I quesiton whether or not that's the only reason the screen has been saved.
Other than that, mostly about 1 1/2 feet drops, generally falling out of the aluminum case while getting out of the chair at my office.
Rugged little device, that's for sure..
Anyone else buy and have problems with it? I searched around after thinking I saw a complaint on it like I've got but couldn't find.
Basicly, I put it on started noticing the top was putting pressure onto the screen I think. THe touch screen got extremely laggy, unresponsivess, and just seemed to go crazy. I'm going to try sanding it down on the inside but I think that just sucks.
On top of that the phone fell out of the back/belt clip half one night and caused a nice freakin dent in my phone and allowed the battery to flip out almost down a sewer.
Anyone care to give me a positive review so I don't just throw this thing out?
Also - is it possible to buy a new physical case to replace a scratched/dented case? Not the body glove I mean the actual phone casing.
chibahawk said:
Anyone else buy and have problems with it? I searched around after thinking I saw a complaint on it like I've got but couldn't find.
Basicly, I put it on started noticing the top was putting pressure onto the screen I think. THe touch screen got extremely laggy, unresponsivess, and just seemed to go crazy. I'm going to try sanding it down on the inside but I think that just sucks.
On top of that the phone fell out of the back/belt clip half one night and caused a nice freakin dent in my phone and allowed the battery to flip out almost down a sewer.
Anyone care to give me a positive review so I don't just throw this thing out?
Also - is it possible to buy a new physical case to replace a scratched/dented case? Not the body glove I mean the actual phone casing.
Click to expand...
Click to collapse
I have this case and had the same problem. I have read that many others have had it too. Honestly I dont know why a company would put out a product like this. They all should be recalled, however me being me decided to just fix it by Taking a dremel tool and shaving some of the inside part of the screen protector off, making it put less pressure on the screen. It fixed it immediately. The case does a great job in protecting the phone, just a major flaw that can be fixed if you have the time and tools. If you dont, ***** to the company and get your money back and try something else.
Praygo said:
I have this case and had the same problem. I have read that many others have had it too. Honestly I dont know why a company would put out a product like this. They all should be recalled, however me being me decided to just fix it by Taking a dremel tool and shaving some of the inside part of the screen protector off, making it put less pressure on the screen. It fixed it immediately. The case does a great job in protecting the phone, just a major flaw that can be fixed if you have the time and tools. If you dont, ***** to the company and get your money back and try something else.
Click to expand...
Click to collapse
Yes I could see that the inside casing was a bit rough so sanding should stop the problem - but seriously that's a major issue.
Have you found that it holds the phone well though? Because I'm very upset that my phone fell out of it once already but maybe it was an error on my part and it wasn't secure enough...
I've never had the phone fall out of the body glove case.
i mangled my body glove case.
someone bumped into me and the phone fell out of the case AGAIN.
i ripped it to shreds and left it on the side of the road to rot into plastic hell.
i dont recommend this product.
I returned mine. I had the exact same issues (screen and phone falling out). It also didn't attach properly on the top left corner, it was always bowed out. I don't recommend it either.
Anyone got any else to share?
I was THIS CLOSE ( || ) to buying it. lol
Is there anything out there that's similar to it in design, but better?
returned
When all the way snapped on, mine pushed the top left corner so hard the entire screen would not respond to touch. Returned it.
My friend and i had the same issue. We just took it off messed around with it and put it back and it works fine, SOMETIMES it happens again but we just take it off and put it on.
Since there is not any other case that provides this type of protection we are keeping it. I rather my phone be safe than anything else.
I just ordered mine yesterday so I'm anxiously awaiting its arrival.
What exactly did you have to mod to get it to work? According to my readings, you just need to sand down the edges that connect with the screen right?
I may just buy the case and sand down what was mentioned. I like the design of the case..only one so far I really like.
I've been using one for about two weeks and am very happy with it. Had read about the screen pressure issue on other posts (searching helps folks), and scraped down the top corners before I put it on. Don't need a dremel tool or sandpaper. No problems, fits perfectly. The only warning is that it's a little dicey to take off once it's on -- it really fits snugly.
Yout're talking about the "sand texture" clip-on case, right? If so, yes, I bought the case too. The top cover was too tight and caused the screen issue people are mentioning. That was an easy fix by shaving down the edges that were pressing too hard (actually, I just cleaned off the coating from the plastic that was causing it... The bottom of the case however wouldn't fit at all. no matter what I tried, I couldn't get all of the clips to lock over the edges of the phone. I removed the felt lining and still had issues. I got around it by using thin double sided tape (for a temporary fix until I got a new case). I wouldn't trust the belt clip with the double stick tape though. I ordered the rubberized case on ebay and the fit is perfect. Just get that one. I sent an e-mail in to Body Glove and have had no response yet. We should all get our money back on these cases, or at least a redesigned bottom case that fits correctly. Right now it was just a complete waste of money. It's a shame, because I really liked the feel of the case.
Torkrench said:
Yout're talking about the "sand texture" clip-on case, right? If so, yes, I bought the case too. The top cover was too tight and caused the screen issue people are mentioning. That was an easy fix by shaving down the edges that were pressing too hard (actually, I just cleaned off the coating from the plastic that was causing it... The bottom of the case however wouldn't fit at all. no matter what I tried, I couldn't get all of the clips to lock over the edges of the phone. I removed the felt lining and still had issues. I got around it by using thin double sided tape (for a temporary fix until I got a new case). I wouldn't trust the belt clip with the double stick tape though. I ordered the rubberized case on ebay and the fit is perfect. Just get that one. I sent an e-mail in to Body Glove and have had no response yet. We should all get our money back on these cases, or at least a redesigned bottom case that fits correctly. Right now it was just a complete waste of money. It's a shame, because I really liked the feel of the case.
Click to expand...
Click to collapse
Could you give us the link for the ebay one please!
http://cgi.ebay.com/NEW-RUBBERIZED-...5|66:2|65:12|39:1|240:1318|301:1|293:1|294:50
That is the one I ordered, and the fit is perfect. The only thing I wish it had was the belt clip insert for the case included. I don't know where to find one, but I mostly keep it in my pocket anyway.
you guys want a good case that protects? check out the monaco aluminum case, it comes with a clear lens on it which I haven't removed but you could if you wanted quick access to the touchscreen. I work in the construction field and have yet to have it fall off my clip. I also dropped my tilt (when I used it) from about 8" off a ladder and it was perfectly fine. The aluminum case for the fuze isn't any more bulky than the body glove case either.
bilbobrian said:
check out the monaco aluminum case
Click to expand...
Click to collapse
I've got one of these as well...and while it does protect the phone very well it will also lower your signal strength. I've had these type cases for the Wizard and Tilt and now the Fuze...whenever I'm in an area where the signal was a little iffy to begin with I WILL either drop the call or be unable to answer with the metal case. So, stay away from the aluminum ones if you go into lower coverage areas (and no...the slots they cut in the back to help improve the signal don't actually help.)
Something I always liked about my Kaiser was having a lanyard attached to it. I did this after dropping it a couple of times due to it slipping out of my hand.
As the HD2 is even more slippery in my fingers and probably more likely to shatter or break on dropping, I was disappointed that there was no lanyard hole.
I contemplated drilling a hole in battery cover but didn't have a drill. So I've duct taped a lanyard onto the back, a la the attached pic.
First I lay the lanyard ring on the back and threaded duct tape through it, locking the lanyard ring to the phone. Then I layered a bit more duct tape on top to give it some strength.
It may look a bit messy and I could have done it neater. At the end of the day it will (hopefully) stop me dropping and breaking a £500 phone which I'm happy about. It's also surprisingly strong and will give an indication before it eventually gives way. Takes about 2 minutes.
Edit: Ugly duct tape method replaced by neater black tape version.
Edit2: Video howto added: http://www.youtube.com/watch?v=yL3owsWT3E4
Disclaimer: If you try this and end up dropping your HD2 anyway, I accept no responsibility!
That could be the worst monstrosity to a HD2 Ive ever seen.
Haha, you may be right. But I don't have a mobile phone to look pretty, I have it to use it and rely on it to be working when I need it, not broken into 100 pieces on the floor.
Here's a neater black tape version. Not sure it will be as strong as the first though.
Biffy said:
Here's a neater black tape version. Not sure it will be as strong as the first though.
Click to expand...
Click to collapse
looks sooo fragile , also u should try take it to a gravire-er if u dont have a drill and make a hole suitable
Job done no messing!
I can't understand why HC didnt add a lanyard bar and at the end of the day your solution will work and probably save your phone one day.
Nice graduated background on your photo and good image quality, what camera did you use?
It's the Panasonic FT1. A little waterproof compact.
Combining duct tape as the first layer and then black tape over for neatness is the best solution so far.
I've also considered super gluing the lanyard into the 3.5mm jack, but know I'd regret doing it straight after!
well, you guys aint the first to do this.
i invented a similar design a few weeks ago, mine used a 1" belt, meaning it can be strapped to your waist any time you like, safe as houses and pretty cool aesthetically
Final version
After a bit of testing, this is the final method I will use.
Some folded black tape under the battery cover. The battery cover adds extra strength to the tape and it looks so much neater than the Duct tape.
to be honest, that is just ugly. sorry.
I also missed such a whole for it, as I also did that with my Kaiser.
Now I sticked to a Silicon/Plastic Combi Case
why dont you get a jelly case or something like that and you can make hole in it. tape will hold fora few days only
I'm going to get a case as well I think. But the tape solution outlined which is partly under the battery case will last a lot longer than a few days.
The tape should only be under any pressure if you're about to drop your HD2, which won't be that often and then the weight isn't that great.
I think it's a great idea, and the 'under battery cover' mod (V 1.3? ) looks fine. I'm going to try copying it so I can clip it to my handbag, but with fishing line for the loop.
Mariad said:
I think it's a great idea, and the 'under battery cover' mod (V 1.3? ) looks fine. I'm going to try copying it so I can clip it to my handbag, but with fishing line for the loop.
Click to expand...
Click to collapse
Yeah, I agree. The third version looks nice and clean! The only question is: What did you attach the tape to? To the cover itself? Because I wonder how much strength it requires to pull off the cover and if that wouldn't happen if the device falls...
EDIT: I love how you labeled this a "hack"!
I attached the tape to the plastic under the cover, where the sim card is. I'll put a quick video together to illustrate.
I left it hanging by the lanyard last night, for about 7 hours, 7 feet in the air, no probs. It's not intended to be pulled as hard as a regular lanyard loop may be, but for a precaution if the phone slips from your hands. And then it will be fine.
And here's the not very good howto video: http://www.youtube.com/watch?v=yL3owsWT3E4
I dont mean to jinx you or anything, but the piece of string from the lanyard could easily split the single layer of duct tape where it's folded.. that's going to be where the weak point is....especially considering the weight of the HD2. It's not going to matter how many pieces of tape you've got under the batter cover.
Now if you were to have your HD2 on a desk or in your pocket, the temptation of grabbing it by the lanyard will be there... or if someone else decided to yank the lanyard.....
I'd suggest trying that method of attachment on something of a similar weight and shaking it around for a bit to see how the duct tape handles.
Remember... the HD2 screen is thin glass... One drop on a hard surface or if it lands at the wrong angle, it'll be time to order a new one!
I've tested it by pulling far more strongly on the lanyard than it ever would be subjected to in real use. I was able to pull it hard about 20 times before the tape started to give way. By then it was visibly starting to tear away, so you should have a good warning before it breaks. It will perfectly suit my needs anyway and I might try doubling the tape up for more strength next. Also, I think this could be improved by using even stronger tape.
Very good on the last release.
Great idea, man.
I'm going to try, but I've only two left hands....
Pink strap should be nice too ;-)
Hey all, I have a LARGE spec of dust thats "stuck" on the inside of the plastic housing for my camera.
Ive tried bouncing it gently around, and trying to move it, but its firmly planted nicely there.
Is that a sealed unit, is there any "easy" access to inside or am I pretty much hooked. I took out all the screws to see if there was any easy access , but with them all removed, I couldnt get the back inside to come off, and didnt want to destroy my phone or ruin anything.
All for ONE spec of tiny dust!
Yea, I have the same problem.
I was bothered at first, but it didn't actually affect any of the pictures
so now i'm just living with it.
I would love to get it out though.
If anyone knows how to, please share!
Thanks in advance.
Take the back part of the case off and clean the lens.
This is on a Fascinate, but the only difference is the back door. Everything is the same on the interior.
I took my I9000M apart and it's the same.
Ian