Let me first apologize. I've spent hours and hours trying to find a solution to this problem with no luck. I'm also sure I'm not posting this in the right place but I just can't look for the correct place anymore. Hopefully you'll have mercy on me...
I used SEUS to update my X1i. Since I have an X1i I used the UK update. There was an update available. I tried to install it but it stopped at 1%. SEUS told me to retry, I did. Still error. I've tried soft/hard resets. I spoke to SE customer service which was a joke. There answer is to send it in for repair.
Has anyone else had this problem? If so, were you able to fix it?
Thanks!
You are correct this is in the Incorrect Place. This Section is "About XDA-Developers"
This is for informatio0n for and about this Forum. At the bottom of the list is the Sony X1 Section.
This thread has been moved there.
Again, My apologies. Thank you for moving the thread Mr. McGee.
Flash it yourself. SEUS crapped on me too, but my x1 wasn't bricked. I don't know why people still use that trash to update, considering all the problems it causes.
http://forum.xda-developers.com/showthread.php?t=446070
If you're scared, then just send it to SE.
Well
I have been using the memory card method but I decided to use SEUS today for the new R2AA_10.
Worked fine for me with no problems. Surprising considering I'm running VIsta Ultimate 64bit and most other things don't work correctly.
Anyway, back to the point, did you have any luck using the SD card method of updating?
Related
Hi Everyone, noob here.
I cant remember the exact procedure that i took, but i rooted my phone, and used x-restore to load floyo onto my x8, i did not really like it and wanted to try a newer version of cyanogenmod -7.1 and i had to flash custom Kernel on.. anyway - i tried flash tool and it said restart your phone and under app settings check the box for allow unrecognized or unsupported files or something like that - sorry i don't recall what it was exactly.. this is my first time doing this. it failed again, so disconnected my phone and just restored floyo and decided i was going to be happy with it.. i had tried to use the plugin to unlock the bootloader after testing it to make sure it could be done.. as the forum said.. and all looked good. but i forgot to close flashtools when i was done trying.. i restored floyo and and then made the mistake of plugging the phone in while flashtool was still on and looking for the phone.. the next thing i see a message pop up saying bootloader unlocked successfully or something similar.. restarting phone.. then my phone restarted and it did something else.. i waited for it to Finnish and then my phone went off..
Now it wont come on at all, no LED, nothing.. The phone is one week old.. i fully charged the battery last night so its not the batter i have Hard Bricked it.. and im freaking out..
I am a computer tech that has never failed to fix any computer problem and have repaired thousands.. i have experience in electrical work and have built tonnes of gadgets like small amps etc... but when it comes to this.. i am a complete Noob and i accept that.. ive screwed up and all i can do is ask for help..
i read through tonnes of forums but none seem to match my case so i thought it ok to ask for help.
What can i do, other than own a $300 paper weight.
Just restore with SEUS or PC companion and install something good like Semc Debrand Engine
I'm sorry to tell u that
u have to go to SEMC to repair it
unless u unbricked it by PCC or SESU
as if u want to fix it u'll pay 100$ or above to fix it
Hey man,
im sorry for what happened to your phone.
http://forum.xda-developers.com/showthread.php?p=12442257#post12442257
have you tried to use that guide? i also bricked my X8, the guide helped me very good and now my x8 runs on Android 2.3.7
Chris95X8 said:
Just restore with SEUS or PC companion and install something good like Semc Debrand Engine
Click to expand...
Click to collapse
Thanks, but how do i do that when it is not even coming on ??
shallondb said:
Now it wont come on at all, no LED, nothing.. The phone is one week old.. i fully charged the battery last night so its not the batter i have Hard Bricked it.. and im freaking out.. I saved months to get that thing here in Zimbabwe.. i paid $300 for it here which is sadly the going price..
Click to expand...
Click to collapse
The symptom you describe there is a HARD BRICK. No LED, no display, no vibration, no nothing means it's DEAD - HARD BRICKED.
There's nothing you can do yourself other than to send it to Sony Ericsson for repair.
Since you said "Zimbabwe" I doubt you have repair shops with the required equipment and technicians to try a JTAG restore.
So I'd say your only option left is to send it off to SE - and once you get it back you better don't mess around with it if the $300 you mentioned means US Dollar (insane price).
EDIT: And the mistake you made ... you somehow made Flashtool to unlock your boot loader on a device that's most likely past a manufacturing date of 11W29. This kills the phone and you simply can't repair it yourself anymore ... see the Hard brick warning - read before boot loader unlock sticky in the X8 General board. There are several posts clearly telling you that everyone who managed to hard brick the phone sent it off to SE as there's simply no "fix it yourself" method available.
Hey guys, i cant do any of those suggestions because my phone is not coming on at all ... is there anything else i can do ? anyone ?
shallondb said:
Hey guys, i cant do any of those suggestions because my phone is not coming on at all ... is there anything else i can do ? anyone ?
Click to expand...
Click to collapse
B.Jay said:
There's nothing you can do yourself other than to send it to Sony Ericsson for repair.
Click to expand...
Click to collapse
Feel free not to believe me, but the is NO other way left anymore.
B.Jay said:
Feel free not to believe me, but the is NO other way left anymore.
Click to expand...
Click to collapse
Thanks B.Jay
Sorry my last post was delayed, i was still sending it when you reply came through. I do believe you. i am going to attempt taking it back to the small shop that sold it to me and see what they recommend..
Evening all,
I have a DHD that is stuck in HBOOT/FASTBOOT, or at least that and the stock recovery program is all I can get to.
I tried an AAHK, and it basically tried to do a downgrade and has left the phone with no data, still at s-on, and I can't find an operator RUU(three uk) to flash it back to a useable state.
Is there a three RUU available?
I'm running around in circles as I can't make a gold card, due to not having another DHD available to retrieve the MMC2. All I need is a goldcard and then I can flash a WWE, but I cant find anywhere to make one without the phone or a similar one.
I dont think it turned the microsd properly into a gc, before it tried to downgrade. Is their anyway I can test to see if the memory card has been successfully goldcarded?
Any help would be greatly appreciated.
Thanks
James
This might help
http://forum.xda-developers.com/showthread.php?p=29203392
Sent from a dream.
Teichopsia said:
This might help
http://forum.xda-developers.com/showthread.php?p=29203392
Sent from a dream.
Click to expand...
Click to collapse
Mine has a lot of those symptoms to be honest. If I vol down/power to get to Hboot, it sits there with no keys being able to be pressed, just highlighted blue FASTBOOT and not even checking for files on memory card
If I just turn it on, it sits at the three splash screen, which i assume is the equivalent of the HTC one for branded phones.
I have now turned it on and left it on as per those linked threads, in the hopes the sd is a proper gold card and it is just slow. Fingers crossed.
Thanks for the pointer
James
There are many threads for your problem, do a search, check what it might be. I believe in the second page of that link has another link, check it out. Find out what is wrong before trying anything. If you have any questions, let us know what are the symptoms, what you have done and so on.
Sent from a dream.
Teichopsia said:
There are many threads for your problem, do a search, check what it might be. I believe in the second page of that link has another link, check it out. Find out what is wrong before trying anything. If you have any questions, let us know what are the symptoms, what you have done and so on.
Sent from a dream.
Click to expand...
Click to collapse
Well what I did, was follow the AAHK instructions, cleaned up my environment etc, went through the install. When it asked to do the downgrade, I said yes, then it asked about wiping and was I sure, so I said yes. It then rebooted the phone and it is now as it is. I pulled the battery and tried vol-down/power, which brings up HBOOT, but it doesnt let me do anything, vol keys and power do not work and it doesnt start looking for image files.
From that thread, it was mentioned it just could be going very slow, and people have just left it overnight. This is what I have done now, and will see if it has accessed the files on the memory card and downgraded properly in the morning.
Thanks
James
Have you tried looking for the RUU here?
Last I remember when aahk downgrades, you will be asked to reboot to basic recovery twice
Panic over, thankfully! Not my phone, you see!
It was so easy to root my S2 and the X10 before that, and the iP3G before that(and custom winmo, and nokia etc etc), I said give it to me, i'll sort you out with some ICS rom action.
Then it all went wrong as explained in my previous posts.
2 days later, i finally found the H3G RUU I needed to get an system on it. Silly branded phones. Took 4 hours to download as it was on a throttled download service(my 100MB leased line usually eats 300MB in seconds, but not this time)
So long story short, into FASTBOOT USB, ran the RUU and it completed and put froyo on the phone, and as a happy coincidence it was at a level that didn't need a downgrade, so AAHK ran through like a trooper, busybox installed and hey presto, ENG S-OFF. IceColdSandwich installed through cwm and one happy mate, who then proceeded to ring his wife and tell her to rent a film, as he would be tinkering with the phone all night lol
It was getting to the point I was going to have to give him my S2, and as I've just taken possession of a Sony SmartWatch, I didn't want to do that!!
Thank for everyone's help and pointers, not sure what went wrong the first time(probably a memory card/incompatibility/goldcard problem), but all sorted now.
James
Hello all,
My friend just gave me his Verizon Sony Xperia Play to root, no big deal. Read you have to downgrade from 2.3.4 to 2.3.3... download flash tool. Try to flash r800.ftf firmware a few times.. never works. Then, I tried to boot it up and it just shows the Sony Ericsson logo then, white triangle with orange exclamation point. PLEASE help, I don't know what to do I think it is bricked.
-thanks
PLEASE!? Does someone know how to help? I am freaking out right now.
Don't know why flashtool wouldn't work. If I were you, id try repairing with Sony PC Companion.
Code:
http://www.sonymobile.com/gb/tools/pc-companion/
Install it. Navigate: Support Zone > Phone Software Update > Repair phone
You would likely get more replies if this was posted this in Q&A section.
Also, try being more clear when asking a question. "firmware a few times.. never works." what does never works mean to someone reading this? it could mean any number of things. Why didn't it work, did you get some sort of an error message?
LordBattleBeard said:
Don't know why flashtool wouldn't work. If I were you, id try repairing with Sony PC Companion.
Install it. Navigate: Support Zone > Phone Software Update > Repair phone
You would likely get more replies if this was posted this in Q&A section.
Also, try being more clear when asking a question. "firmware a few times.. never works." what does never works mean to someone reading this? it could mean any number of things. Why didn't it work, did you get some sort of an error message?
Click to expand...
Click to collapse
Well I ran the 2.3.3 .ftf file again for like the 13th time and this time it worked. It booted normally and is now running 2.3.3. Unfortunately it is extremely buggy and force closes apps a lot. So now is the time when I 'repair' It with the PC Companion I think. Thank you very much for your help! :highfive:
flyinghipposquared said:
Well I ran the 2.3.3 .ftf file again for like the 13th time and this time it worked. It booted normally and is now running 2.3.3. Unfortunately it is extremely buggy and force closes apps a lot. So now is the time when I 'repair' It with the PC Companion I think. Thank you very much for your help! :highfive:
Click to expand...
Click to collapse
No problem. Glad to hear you got it working again
FYI. Depending on the firmware it restores to, you can use DooMLoRD_v4_ROOT-zergRush-busybox-su method to root GB 2.3.4. It can't root the absolute latest version (I think .62) which already patched the exploit, but mine always repairs to 4.0.2.A.0.42 and that roots just fine.
Hello, my DVP suddenly went bonkers and all i get is the DELL boot logo. I tried going into recovery to restore but pc wont detect. I cant do anything. i cant install anything using cab sender since cant detect and i cant unbrick due to same reason....anyone know how to fix this? Thank you in advance.
It sounds like the internal SD card crapped out. You could try my unbrick method but it sounds like it isnt being detected. Check in device manager to see if the USB device is being detected.
no detection at all. my friend told me he installed something on it using cab sender. Don't know what files were used but if need ill ask him. If only connection still worked i can restore stupid phone.
Anyone has any idea what to do? phone is just being paper weight now would like to use it again
dinhy34 said:
Hello, my DVP suddenly went bonkers and all i get is the DELL boot logo. I tried going into recovery to restore but pc wont detect. I cant do anything. i cant install anything using cab sender since cant detect and i cant unbrick due to same reason....anyone know how to fix this? Thank you in advance.
Click to expand...
Click to collapse
i had the same problem with other DVP, and i think that the processor is dead, because the snapdragon QSD8250 have this issue, i know but some month´s ago, i buyed two non working hd2, thinking that have problems of software and after research many days, i find this problem ,this proccesor dies for overheating , to solve this i buyed two hd2 with broken display and change the board, for this reason, buyed a broken dvp to do the same, ...sorry for the bad news,
Im pretty sure its not a cpu issue, i mentioned my friend force install something using cab sender and the issue happened because of that. Im trying to figure out how to recovery from this issue. thanks for help anyways
dinhy34 said:
Im pretty sure its not a cpu issue, i mentioned my friend force install something using cab sender and the issue happened because of that. Im trying to figure out how to recovery from this issue. thanks for help anyways
Click to expand...
Click to collapse
I agree with you. I have the same problem because of skipped upgrading of ROM, form 7004 to 7720. I have tried some steps on the device,
and find JTAG pins on board, now I'm seeking a riffbox to fix the problem, maybe Nosker can answer if this is feasible. I had followed his thread here:http://forum.xda-developers.com/showthread.php?t=1207805
Just for your reference...
seems very interesting. I hope you guys are able to proceed with what you guys are doing. I read the thread, so if i were to fix it i would need a riftbox? im very noobie in the stuff mentioned in the thread but if you guys are able to give a guide then i can follow it . best of luck to you guys!
did you guys ever got this resolved? i'm having the same problem.
ok... anyone tell me, what's happen, when we re-write sd card from another device?
my dell venue pro stock won't boot normally
MJCS said:
It sounds like the internal SD card crapped out. You could try my unbrick method but it sounds like it isnt being detected. Check in device manager to see if the USB device is being detected.
Click to expand...
Click to collapse
my DVP can't(won't) boot its stock on its logo dell, what can i do, but i try your step i can't download your driver. can you help me or there's another way to restore or to flash my DVP THANKSS
same issue
Any ideas anyone.
norvymariano said:
my DVP can't(won't) boot its stock on its logo dell, what can i do, but i try your step i can't download your driver. can you help me or there's another way to restore or to flash my DVP THANKSS
Click to expand...
Click to collapse
dell venue pro
Has anyone come up with a fix for this issue? my DVP will come on and the DELL logo will appear for a few seconds then the connect to pc screen
comes up and thats all it will do. when this first started happening I could take the battery out and put it back in like 50 times and it would finally start working and it would stay working until the battery went dead now I can't get it to boot at all. any info would be great thanks
Hi guys, Last night I accidently unplugged my phone while installing ClockWORKMOD recovery. Now when I boot my device it is stuck on the Downloading screen. I tried everything including the posts here but the Odin software doesn't see my phone and removing the battery and reinstalling does nothing. I even wiped the phone and factory reset via the clockwork... No Luck. It will not install the Crash ROM either. I get error 7.
It seems like I bricked the phone but I know there is always a way back to life. At least I hope. Any help guys would be great.
thxs
Carlo
shpack said:
Hi guys, Last night I accidently unplugged my phone while installing ClockWORKMOD recovery. Now when I boot my device it is stuck on the Downloading screen. I tried everything including the posts here but the Odin software doesn't see my phone and removing the battery and reinstalling does nothing. I even wiped the phone and factory reset via the clockwork... No Luck. It will not install the Crash ROM either. I get error 7.
It seems like I bricked the phone but I know there is always a way back to life. At least I hope. Any help guys would be great.
thxs
Carlo
Click to expand...
Click to collapse
You need to properly install the correct drivers on your PC. There should be no reason that ODIN doesn't see your phone if they are installed correctly. A quick search of the forums should get you the proper drivers to install. You can also try Kies emergency recovery, but it is hit and miss. Good luck.
+1 if you can get into download you can Odin. Use the usb ports in the back of the pc. You might have to use a different computer also. For the life of me I can't get Odin on my pc to recognize the device but I have no problem with my laptop.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Wow, didn't we just fix this problem like 2-3 threads ago, IN THIS FORUM?
TheAxman said:
Wow, didn't we just fix this problem like 2-3 threads ago, IN THIS FORUM?
Click to expand...
Click to collapse
That's the thing, these exact same types of threads just keep rolling through one after the other...people don't search and they don't read. That's the reason they are in the situation they are in to begin with and it seems they just don't learn.
Fortunately, the AT&T S4 forum has come far enough along that the sticky threads and the threads like your guide can be linked for these people to put a little time into finding a solution for themselves. Most of them don't like it (they want it done for them), but if it is all they get, they will finally have to do something the right way on their own.
Actually, a few people are thankful for being pointed in the right direction, but most are still pissed because it means they have to do what they should have done in the first place...follow XDA rules, use the search function, and read. If you don't do everything for them and hand it to them on a plate they call you names and say you are a ****, unhelpful, etc... I just laugh about it because it becomes clear why their phone is F'ed up in the first place. The thing is, sometimes you just can't help people. Just every now and then, someone comes along that needs help and is willing to do things the right way.
You can NOT have kies drivers and samsung drivers loading at the same time, I do not use kies at all, and my pc has NEVER gave me a issue yet using odin, including in my G3 days. uninstall that worthless kies and proceed. If you have to use kies, load it as needed then remove it.
And as always with the lovely microsoft windows, after you un-install anything you have to reboot, for it to work properly.
Linux is my BUD!