Related
So this is a popular program for the Palm OS: NotifyMe! which basically is a little configurable application that would play a sound and/or vibrate if your SD card ejected.
I know a lot of people who "accidently" shoot their card out when pulling their device from a holster.
If it could have the features of "NotifyMe!" and be WM5 compatible it could be a very popular program.
TIA
malatesta said:
So this is a popular program for the Palm OS: NotifyMe! which basically is a little configurable application that would play a sound and/or vibrate if your SD card ejected.
I know a lot of people who "accidently" shoot their card out when pulling their device from a holster.
If it could have the features of "NotifyMe!" and be WM5 compatible it could be a very popular program.
TIA
Click to expand...
Click to collapse
Hi,
I saw your request 2 days ago, and I said why not! I checked the GUI of the NotifyMe application for Palm and I decided to make one for PPC.
Installation:
1) just unrar the file and copy the exe on your ppc (it may be installed on the sd card and launched from there, it works when sd card is removed, but don't select a music file from the sd card, no sound will be played of course):wink:
2) launch the exe. The first time it will install the config control panel applet and launch it.
3) just configure the notif application and start it.
Useful infos:
This program has been tested on my ppc (see signature), on WM2005 ppc emulators and WM2003SE emulators.
There is no builtin sounds as the one for the Palm, but it can play different music type files like midi, wave, mp3 and wma files.
The app has been UPXed, so it is very small.
The notification stops either by pushing on the stop button or by putting the sd card back into its slot.
Enjoy,
Cheers,
.Fred
ps.: feedback appreciated...
Here is the app and some screenshots:
Thanks .Fred!!! :wink:
vivi said:
Thanks .Fred!!! :wink:
Click to expand...
Click to collapse
Hey Man,
Still living ?!?! :lol:
It's a long time now! :wink:
Greetings,
.Fred
Ha Ha Ha..
Yesssss , I am here.
Now I am using Blue Angel.
So I'm here these days.
But still have a look at Buzzdev.
Nice to meet you here.
:wink:
I've tried it.
It works.
If I choose "Show message and Vibrate and Play sound", it doesn't vibrate and play wav as I choose.
I choose Alarm1.wav which is in ROM.
It only pops up sound and shows message on the today screen, no vibration and no sound.
But if I choose "Show message and Play sound" or "Show message and vibrate",it works fine.
I use BA WM5 AKU3.2 ROM(Helmi 1.3.2)
Thanksss.
vivi
vivi said:
Ha Ha Ha..
Yesssss , I am here.
Now I am using Blue Angel.
So I'm here these days.
But still have a look at Buzzdev.
Nice to meet you here.
:wink:
I've tried it.
It works.
If I choose "Show message and Vibrate and Play sound", it doesn't vibrate and play wav as I choose.
I choose Alarm1.wav which is in ROM.
It only pops up sound and shows message on the today screen, no vibration and no sound.
But if I choose "Show message and Play sound" or "Show message and vibrate",it works fine.
I use BA WM5 AKU3.2 ROM(Helmi 1.3.2)
Thanksss.
vivi
Click to expand...
Click to collapse
You're right Vivi, when I make the test, it works, but when it should be done by the app, it doesn't...
Ok I will investigate this!
Ok, it's done, stupid of me! :x
Version 1.1 is available now...
Thanks for the feedback!
.Fred
Thanks again .Fred.
The new version works completly!!!
vivi
dotfred said:
I saw your request 2 days ago, and I said why not! I checked the GUI of the NotifyMe application for Palm and I decided to make one for PPC.
Click to expand...
Click to collapse
holy cow! I forgot about this request
Thanks so much, I'm going to install now and pass the word around.
thanks!
--Mal
nice program, very nice of you
nice program, very nice of you
dotfred
btw, just for info purposes:
- How would one remove the entry from the Settings tab to configure the program?
- I don't think this is working as it should on the Treo 700wx, but that is probably due to Palm's modifications of the OS. Basically, it only works when the device is powered on. If the device is in standby it doesn't "wakeup the device".
malatesta said:
dotfred
btw, just for info purposes:
- How would one remove the entry from the Settings tab to configure the program?
- I don't think this is working as it should on the Treo 700wx, but that is probably due to Palm's modifications of the OS. Basically, it only works when the device is powered on. If the device is in standby it doesn't "wakeup the device".
Click to expand...
Click to collapse
- it is possible, but tricky.
The control panel applet shown on the Settings/Personal Tab can be found in /windows/NotifyMeCpl.cpl. The trick would be to change the extension .cpl by .dll then open the notifyme.exe in an hex editor and replace notifymecpl.cpl by notifymecpl.dll.
To configure the program, you will need then to launch /windows/ctlpnl.exe notifymecpl.dll
I hope it's clear. :roll:
- I don't know how it works on a Treo, but I just use the standard notification api... On my ppc, whenever I pull the SD card out of its slot, the device wakes up... If you want I can try to add this functionality but I'm not sure if it will work. Maybe the program won't receive the notification that the sd card was retrieved.
Cheers,
.Fred
dotfred,
Actually, I just meant how to remove the control panel applet (my sentence was a bit garbled!) e.g. if I just wanted to remove the program from my device.
In that case, is it just a matter of deleting /windows/NotifyMeCpl.cpl ?
As far as the Treo, don't worry about it for now. Palm did lots of trickery (for the better actually) such as changing registry entries so most "tricks" don't work now.
Once the 750v comes out for you GSM users, I'm sure more about how the OS is orientaited and organized will come out. Then it might be easier for us to nail down the problem (I unforutnately don't know enough to be of much help!) :lol:
very sweet, however i just tried out the program and am having a small issue. after i ejected my SD card the alarm worked as it should, i turned it off and reinserted my SD card and now i have a new "Storage Card2" on my device all my programs are on "Storage Card2" instead of my original "Storage Card" can't rename the file either??? anybody with a suggestion would be greatly appreciated. thanks in advance
1. delete "Storage card"
2. rename "Storage Card2" to "Storage Card" on pdaphone, if it doesnt work, try to activesync with PC and rename it on pc
trying... trying...trying,,,
i cannot delete the folder it has the temp internet files and i get an error trying to delete it. same with rename???? all my programs are on the storage card so now nothing works URGHHHHH!!!!
any other suggestions?
thanks
i have the same problem few days ago, dont remember actually how i fix it.
1. try to fix it on pdaPhone
2. activesync with pc and fix it on pc
or try total commander..
http://www.ghisler.com/ce.htm
if u still cant fix it, do a backup of your pdaphone and copy the backup file to your pc, then do a hardreset and try again
bigedmiami said:
trying... trying...trying,,,
i cannot delete the folder it has the temp internet files and i get an error trying to delete it. same with rename???? all my programs are on the storage card so now nothing works URGHHHHH!!!!
any other suggestions?
thanks
Click to expand...
Click to collapse
read here:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=230&more=1&c=1&tb=1&pb=1#more230
malatesta said:
dotfred,
Actually, I just meant how to remove the control panel applet (my sentence was a bit garbled!) e.g. if I just wanted to remove the program from my device.
In that case, is it just a matter of deleting /windows/NotifyMeCpl.cpl ?
As far as the Treo, don't worry about it for now. Palm did lots of trickery (for the better actually) such as changing registry entries so most "tricks" don't work now.
Once the 750v comes out for you GSM users, I'm sure more about how the OS is orientaited and organized will come out. Then it might be easier for us to nail down the problem (I unforutnately don't know enough to be of much help!) :lol:
Click to expand...
Click to collapse
If you just want to remove thr program from the device, just delete the /windows/notifymecpl.cpl and delete the notifyme.exe whereever you put it on the pda.
If you want to clean the registry as well, delete the entries under
-HKCU/Software/FdcSoft/NotifyMe
-HKCU/ControlPanel/SoundCategories/NotifyMeCat
-HKCU/ControlPanel/Sounds/NotifyMeSound
Cheers,
.Fred
bigedmiami said:
trying... trying...trying,,,
i cannot delete the folder it has the temp internet files and i get an error trying to delete it. same with rename???? all my programs are on the storage card so now nothing works URGHHHHH!!!!
any other suggestions?
thanks
Click to expand...
Click to collapse
Try using the memory card reader.
This is a config editor for Grump's iPhone LookAlike which can be found here:
http://forum.xda-developers.com/showthread.php?t=302739
Features:
Ill write them down when i feel like it.
Installation : (Ill create a cab file eventually)
1. Put iConfig.exe in "\Program Files\IPhone" or wherever you put iPhone.exe
2. Extract the files from FileDialogChanger.zip and put both files in \windows\
3. Soft-Reset your device
4. Goto Settings -> System -> FileDialogChanger and check the box and press ok
5. Run iConfig.exe
Requires .net CF 2.
http://www.microsoft.com/downloads/...88-59e2-4eba-a70e-4cd851c5fcc4&displaylang=en
How to Use:
Ill get back to you on that.
Note:
Step 2-4 are Optional but Highly Recommended (If you skip this the app would be limited in use)
Tip: Put a shortcut to iPhone and iconfig in \windows\start menu\programs\ for easy acess
Thanks to:
Grumps - For iPhone and coding help/suggestions
Almerchant - For finding FiledialogChanger, testing, suggestions
Glipsie - Code Support
Version History :
0.1 - 0.7 - Internal test versions
0.8 - First Release
0.81 - Added support for an upcoming feature in iPhone
0.9 - Updated
Current Version : 0.9
So, some of you asked what the different settings does.
BatteryClick - close or minimize the program when you click the battery-icon
Time - 24 or 12 hour time format
Speed - time used for animation when starting an application
Cool ****
This should make configuration much easier.
Nice lil app
Simple
Stable
Works
Nice app going mate
Makes life easy
Keep up the good work.
Al
Very nice !
Great!
Great Work!
it just simply works
I get a "corrupted/file not found error".
I have a MDA Compact II, using the Charmer WM6 ROM.
tman_ca said:
I get a "corrupted/file not found error".
I have a MDA Compact II, using the Charmer WM6 ROM.
Click to expand...
Click to collapse
Im aware of it, this is probably because iphone.txt isnt "updated" or contains all settings.
going to fix it so it loads it anyway, but currently all you have to do is to goto menu, settings and set all settings, like timeformat, close or minimize, iconpopaway-speed etc and press apply ( remember to press "Set" button for the speed)
Tell me if that helps
Very nice this definitl makes the Iphone app complete ...good job!
just follow the directions.......
tman_ca said:
I get a "corrupted/file not found error".
I have a MDA Compact II, using the Charmer WM6 ROM.
Click to expand...
Click to collapse
you are going to get that the 1st time you run the file dialogue changer...because the iphone.txt file was not created yet...just follow the directions and check the box and hit ok ...soft reset and run the file dialogue changer app again this time applying whatever setting you want and you will not get that message again......
On a side note .....try figuring it out yourself before getting all frazzeled at the 1st error you get......
ljinsane said:
you are going to get that the 1st time you run the file dialogue changer...because the iphone.txt file was not created yet...just follow the directions and check the box and hit ok ...soft reset and run the file dialogue changer app again this time applying whatever setting you want and you will not get that message again......
On a side note .....try figuring it out yourself before getting all frazzeled at the 1st error you get......
Click to expand...
Click to collapse
You mean the first time you run iConfig right?
and if you already had iPhone.txt its because it adds a setting, which will be used in the next iPhone build, (current is 0.986)
Edit: The next iPhone build is 0.987+
Inphyy; Thanks for response mate. I'll have a go and let you know how it goes.
ljinsane; wtf, I'm not "frazzeled"; how'd you surmise that from my 2 line message anyway. ?
I'm using the latest; 0.986
tman_ca said:
I'm using the latest; 0.986
Click to expand...
Click to collapse
I meant 0.987+
have you gotten the message more than once?
I just started using iConfig but haven't really mucked with it much yet. However, I did see that when I changed the level indicator (1-5), the icon for the currently selected spot didn't update to match the new level. You have to click off and back on to see it.
nice work...
I just started using iConfig but haven't really mucked with it much yet. However, I did see that when I changed the level indicator (1-5), the icon for the currently selected spot didn't update to match the new level. You have to click off and back on to see it.
Click to expand...
Click to collapse
Yes, i know, just forgot about it, ill look into it on monday
i have a problem:
it says something about " your version of .NET compact framework isn´t up to date"
i have wm2003
lamandrion said:
i have a problem:
it says something about " your version of .NET compact framework isn´t up to date"
i have wm2003
Click to expand...
Click to collapse
You need .net CF 2
http://www.microsoft.com/downloads/...88-59e2-4eba-a70e-4cd851c5fcc4&displaylang=en
0.82 Released
replace all 3 sounds
--------------------------------------------------------------------------------
Here is a zip file to replace all 3 default sounds on your wing. Just unzip, copy and paste these into the window directory on your phone thru ActiveSync and replace the default sounds.
You can rename all three
HKLM\Software\HTC\SlidingSound......
0 = change to "Star Trek Door"
1 = change to "Whistle"
2 = change to "Transformers"
Enjoy !!!!!!
hi i tried this and its giving me an error saying make sure u have enough memory or its not overwrite protection or something like? iam not sure wat iam doin wrong can u help please
not sure
I tested these sounds on my phone. Just unzip, copy, then paste them into your windows directory on your wing. It should just ask you if you want to overwrite the ones already there.
If you are having Memory problems maybe you change your Pagepool size to 6.
Memmaid is also a really good program to free up memory or manage your memory.
try this
Try to copy and paste each sound into windows one at a time instead of all 3.
boyet804 said:
hi i tried this and its giving me an error saying make sure u have enough memory or its not overwrite protection or something like? iam not sure wat iam doin wrong can u help please
Click to expand...
Click to collapse
if it's an issue of write protection try using a different file explorer like TC to change the permissions of that file. Then rename it so the file names are the same and it should allow you to replace the one in the windows folder with this edited one.
I'm not sure about you guys but I can't stand the sliding sounds... this is the first thing I turn off everytime I do a reset...but hey thats just me
neptune said:
I'm not sure about you guys but I can't stand the sliding sounds... this is the first thing I turn off everytime I do a reset...but hey thats just me
Click to expand...
Click to collapse
I concur... I use my phone too much and it would get quite irritating to hear
"teem tum.... toom teem" over and over!!
so i installed the sounds and i get the star trek sound
i looked everywhere to find out where to change or turn off the sounds
im using touch it 2.3 and i swore i fiddled with it before the update
uues said:
so i installed the sounds and i get the star trek sound
i looked everywhere to find out where to change or turn off the sounds
im using touch it 2.3 and i swore i fiddled with it before the update
Click to expand...
Click to collapse
There should be a box you uncheck in settings/sliding keyboard.
Found this new one -- made it my third one
This one is really cool. When you open your keyboard you hear a lock and load of a gun. Close it and it fires a gunshot. Its funny.
I've found the way to add the sounds instead of overwrite them. Here the registry changes:
Code:
REGEDIT4
[HKEY_LOCAL_MACHINE\Software\HTC\SlidingSound]
"ActiveSlidingSound"=dword:00000003
"SlidingSoundEffect"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\HTC\SlidingSound\4]
"out"="Tr_out.wav"
"in"="Tr_in.wav"
@="Transformers"
[HKEY_LOCAL_MACHINE\Software\HTC\SlidingSound\3]
"out"="Slider0_out.wav"
"in"="Slider0_in.wav"
@="Star Trek"
[HKEY_LOCAL_MACHINE\Software\HTC\SlidingSound\2]
@="Xylophone"
"out"="2_out.wav"
"in"="2_in.wav"
[HKEY_LOCAL_MACHINE\Software\HTC\SlidingSound\1]
@="Piano"
"out"="1_out.wav"
"in"="1_in.wav"
[HKEY_LOCAL_MACHINE\Software\HTC\SlidingSound\0]
@="Wind Chimes"
"out"="0_out.wav"
"in"="0_in.wav"
0,1 and 2 were the original sounds. I added 3 and 4...
This works on a Herald with Touch IT...
Gentlemen,
I was successful at tweaking the registry and adding a folder to use the transformer sound but when I add my own wav sound, it does not work. Any info ????
it works fine love the gun one THANKS
Still cant get it
Can someone please give me some more in depth instructions? I cant find the folder to save the sounds to. I dont know how to make it copy to the correct folder when I sync. Any help?
Gimpy
Airman Gimpy said:
Can someone please give me some more in depth instructions? I cant find the folder to save the sounds to. I dont know how to make it copy to the correct folder when I sync. Any help?
Gimpy
Click to expand...
Click to collapse
Are you using Windows Vista to Sync Up to your phone?
(Vista hides the windows folder on your phone)
No im using Xp with SP2. I know reading the manual would have prolly helped in all this, but for now Im just concerned with the slider sounds. So if anyone has the time and patience to give me a bit of a dumbed down short walk thru to either sync the wavs for the slider sound, or to copy the files into the phone from SD card that would be great.
Thanks for the reply and any other help I can get.
Gimpy
Airman Gimpy said:
No im using Xp with SP2. I know reading the manual would have prolly helped in all this, but for now Im just concerned with the slider sounds. So if anyone has the time and patience to give me a bit of a dumbed down short walk thru to either sync the wavs for the slider sound, or to copy the files into the phone from SD card that would be great.
Thanks for the reply and any other help I can get.
Gimpy
Click to expand...
Click to collapse
Did you download ActiveSync 4.5 from Microsoft?
http://download.microsoft.com/download/5/4/6/5467c040-a935-4987-aa30-5dcbc36a57db/setup.msi
First, you need to install Activesync to your PC, then sync up your phone to where it says connected.
I have the Wing with Touch 2.3 and I looked everywhere for the sliding keyboard setting. I looked under my settings tab but cant seem to find the setting plz help
handsome22 said:
I have the Wing with Touch 2.3 and I looked everywhere for the sliding keyboard setting. I looked under my settings tab but cant seem to find the setting plz help
Click to expand...
Click to collapse
They probably cooked it out of that ROM.
some users don't like the keyboard sounds.
zcink said:
Did you download ActiveSync 4.5 from Microsoft?
http://download.microsoft.com/download/5/4/6/5467c040-a935-4987-aa30-5dcbc36a57db/setup.msi
First, you need to install Activesync to your PC, then sync up your phone to where it says connected.
Click to expand...
Click to collapse
So with this new activesync are there just more options for the sync? Does it open up a sounds, or slider sounds file? I also keep gettin an error msg when try to download it. It is supost to be run on my pc and not the wing correct? Isnt there an easier way to copy the modified sounds from my SD card straight to a folder? And where is the directory....I cant seem to find it.
Thanks
Gimpy
Airman Gimpy said:
So with this new activesync are there just more options for the sync? Does it open up a sounds, or slider sounds file? I also keep gettin an error msg when try to download it. It is supost to be run on my pc and not the wing correct? Isnt there an easier way to copy the modified sounds from my SD card straight to a folder? And where is the directory....I cant seem to find it.
Thanks
Gimpy
Click to expand...
Click to collapse
Also, I think I may have already had 4.5 on my pc which is where the error msg was coming from. I uninstalled and then reinstalled. Im gonna get into that fat wing user manual and try to learn more about active sync. in the mean time if there is anyway to copy it from my SD to a folder that would be a big help.
Thanks again
Gimpy
I've seen a HTC-made animated launcher in another topic.
( http://forum.xda-developers.com/showthread.php?t=329694 )
The prog can be downloaded at http://rapidshare.com/files/55485726/HTC_TOUCH.rar
Some forum mates have successfuly installed it, but the big problem is that the prog is in Chinese...
Would anyone try to make an English version of it?
Thanks in advance!
cheers,
English Would def. be nice this thing is pretty sweet and easy on the memory
Really nice application just tried it.
Works wonderfully, hope someone can make an english version.
not working for me (mda compact/wm2003)
Bumping this because it takes the least amount of mem. and is very fast please someone see if they can fiddle with it an get english working.
Just a little help from my friends?!... (Joe Coker)
cheers,
Doesn't work on my Touch. Says it's not signed or something like that (rough translation)
Well i like it very much and it is sort of working , but no english , looked in the app folders and the registry but i cannot recognize what to change so i removed it
Hopefully someone can translate it because i find it very usefull
Nice Launcher
Hello,
I was able to install it ion Hermes (WM6) and runs smoothly.
I dug into it and by trial/error I was able to delete/create new shortcuts for system setings.
For some obscure reason I was not able to assign any new applications.
Can anybody who owns a Chinese enabled device, try this and maybe help us understand the menu/options?
Thanks.
STANUL said:
Hello,
I was able to install it ion Hermes (WM6) and runs smoothly.
I dug into it and by trial/error I was able to delete/create new shortcuts for system setings.
For some obscure reason I was not able to assign any new applications.
Can anybody who owns a Chinese enabled device, try this and maybe help us understand the menu/options?
Thanks.
Click to expand...
Click to collapse
I'm working on it.....I am modifying the dDockView.xml now....
dcoloane said:
I'm working on it.....I am modifying the dDockView.xml now....
Click to expand...
Click to collapse
great dcoloane..make this an english. and dont forget this to post in our ATOM forum
There are people doing it here as well. Make sure you guys exchange findings and stuff... dont waste double efforts on it
http://forum.xda-developers.com/showthread.php?t=316026
hanmin said:
There are people doing it here as well. Make sure you guys exchange findings and stuff... dont waste double efforts on it
http://forum.xda-developers.com/showthread.php?t=316026
Click to expand...
Click to collapse
Hmm....that one is a Simplify Chinese Version....this one is Traditional Chinese Version.....
Anyway, it is more likely the same, just change the wordings in the xml file and you will get a working English version.
Uploaded but deleted due to failure of installation, repost again later.
Useful tips on creating links:http://forum.xda-developers.com/showthread.php?t=302739&page=41
Control Panel
Connections:
Beam: 8#"ctlpnl"cplmain.cpl,15,0?shellres.dll,-13910
Bluetooth: 8#"ctlpnl"cplmain.cpl,23,0?shellres.dll,-13909
Connections: 8#"ctlpnl"cplmain.cpl,19,0?shellres.dll,-13953
Network cards: 8#"ctlpnl"cplmain.cpl,17,0?shellres.dll,-13888
Personal:
Buttons: 8#"ctlpnl"cplmain.cpl,12,0?shellres.dll,-13944
Input: 8#"ctlpnl"cplmain.cpl,8,0?shellres.dll,-13936
Lock: 8#"ctlpnl"cplmain.cpl,1,0?shellres.dll,-13942
Menus: 8#"ctlpnl"cplmain.cpl,11,0?shellres.dll,-13937
Owner Info: 8#"ctlpnl"cplmain.cpl,2,0?shellres.dll,-13841
Phone: 8#"ctlpnl"cplmain.cpl,20,0?shellres.dll,-13954
Sounds: 8#"ctlpnl"cplmain.cpl,9,0?shellres.dll,-13924
Today: 8#"ctlpnl"cplmain.cpl,13,0?shellres.dll,-13952
System:
about: 8#"ctlpnl"cplmain.cpl,5,0?shellres.dll,-13899
Certificates: 8#"ctlpnl"cplmain.cpl,22,0?shellres.dll,-13941
Clock n Alarm: 8#"ctlpnl"cplmain.cpl,16,0?shellres.dll,-13840
Error Reporting: 8#"ctlpnl"cplmain.cpl,24,0?shellres.dll,-13997
Memory: 8#"ctlpnl"cplmain.cpl,4,0?shellres.dll,-13900
Power: 8#"ctlpnl"cplmain.cpl,3,0?shellres.dll,-13895
Regional Settings: 8#"ctlpnl"cplmain.cpl,18,0?shellres.dll,-13901
Remove Programs: 8#"ctlpnl"cplmain.cpl,10,0?shellres.dll,-13943
Screen: 8#"ctlpnl"cplmain.cpl,7,0?shellres.dll,-13906
*additional info:
You might've noticed, there're 2 number delimited by comma in every shortcut. Eg. Bluetooth, the 2 numbers are "23,0". The first number is the id for Bluetooth, while the second number is the tab's id. If you open up the bluetooth setting, you will see 3 tabs: Mode, Devices, and COM Ports. 0 is for the first tab, 1 is for the second, and so on. So if you wish to open up Bluetooth and point straight to the Devices tab, just change it to "23,1".
SMS & Mail
SMS list view: 20#"\Windows\tmail.exe"-service "SMS"
New SMS: 20#"\Windows\tmail.exe"-service "SMS" -to "" -body ""
Email list view: 20#"\Windows\tmail.exe"-service "Name of email account"
New Email: 20#"\Windows\tmail.exe"-service "Name of email account" -to "" -body ""
*additional info:
The name for the default "Outlook" account is "ActiveSync" (case sensitive). To open up your own email account, make sure you type the exact name inside the quotes, including symbols and punctuations if necessary (case sensitive, too).
Phone Dialer
Phone dialer: 20#"\Windows\cprog.exe"
Prompt to call 1234567: 20#"\Windows\cprog.exe"-url tel: 1234567
*some phones use vtkey.exe instead of cprog.exe. I believe cprog.exe is used by Atoms only.
Important:
1) make sure you encase the path with quotes. eg. "\Windows\cprog.exe"
2) make sure there is no space between the path and the parameters. eg. "ctlpnl"cplmain.cpl
3) the number preceding the # character is the length of the path including the quotes (" "). eg. The length of "\Windows\cprog.exe" is 20.
tried to install to my Wizard, it just shows up with "Installation of HTC Touch.cab was unsuccessfull"
Anyway, thanks.
Just use the original cab to install the app, and copy this xml to \windows\.
I also tried to make a cab with just the replaced xml and kept failing.
BTW you cannot use "&" in the xml else the app fails, so you cannot launch the picture viewer now, you got to change it in start menu, or make a direct link to it.
ATM translating the exe but can't read Chinese, but succesfully translated some random text.
medkid said:
tried to install to my Wizard, it just shows up with "Installation of HTC Touch.cab was unsuccessfull"
Anyway, thanks.
Click to expand...
Click to collapse
Same here.
dcoloane said:
Hmm....that one is a Simplify Chinese Version....this one is Traditional Chinese Version.....
Anyway, it is more likely the same, just change the wordings in the xml file and you will get a working English version.
Uploaded
Click to expand...
Click to collapse
Should make some modifications in exe/dll files too. The application is trying to access \Windows\“开始”菜单\程序\ folder instead of \Windows\Start Menu\Programs\
That should be changed to be able to use the full functionality of the program, and it is not in XML file, unfortunately
Cheers
A resource hacker is a no-go, if you want to change specific strings you can't run the app anymore.
I already figured out what's doing what and how I should translate it, but it's just no use.
dev's homepage?
http://www.studiokuma.com/wm/?section=s1
This is a partial translation, install the original cab, and replace the exe and xml from both this zip and the one I posted earlier.
Sometimes I had to come up with funny translations as the programe would else crash, thus cancel became no, custom icon just icon, and provider became net.
Other parts I couldn't get working in a right way so are still as they were.
Maybe someone else can translate it better.
I tried to use the Internet Sharing option when connecting to a laptop - just like I did with the original ATT Tilt - but I always get Invalid APN. Does everybody get the same and is there a work-around?
tethering
check to see (upon running Internet Sharing)
under Network Connection
my TP2 shows 2 options
MEdia Net
and one for GPRS A&T
the only one that works for me it MEdia Net
please post if you have those options and if it worked.
internet sharing
OK
Thanks for posting the issue with internet sharing
Here's the fix
Use reg edit and change these values:
HKCU\SOFTWARE\MICROSOFT\INTERNETSHARING\LASTCELLCALL CHANGE TO "MEdia Net"
HKLM\Comm\InternetSharing\ForceCellConnection change to "MEdia Net"
AT&T blocked option to change connection type so you have to change that in reg.
Now just softreset and enjoy.
PS
I'm using it right now
tether tweak cab for att stock?
emilware_v1.1 said:
OK
Thanks for posting the issue with internet sharing
Here's the fix
Use reg edit and change these values:
HKCU\SOFTWARE\MICROSOFT\INTERNETSHARING\LASTCELLCALL CHANGE TO "MEdia Net"
HKLM\Comm\InternetSharing\ForceCellConnection change to "MEdia Net"
Click to expand...
Click to collapse
Hey I don't have my Tilt 2 yet so I can't test this but I cabbed up your changes. Maybe one of you with Tilt2 MEdia Net could test this sucker out? First make sure you are currently unable to tether and then install and soft reset to see if it fixed it. Report back!
edit: cab removed, report of no success
Doug
d0ugie said:
Hey I don't have my Tilt 2 yet so I can't test this but I cabbed up your changes. Maybe one of you with Tilt2 MEdia Net could test this sucker out? First make sure you are currently unable to tether and then install and soft reset to see if it fixed it. Report back!
Doug
Click to expand...
Click to collapse
Doug, it didnt work for me...
This is the correct reg
"HKCU\SOFTWARE\MICROSOFT\INTERNETSHARING\LASTCELLCONNECTION CHANGE TO "MEdia Net""
I updated it manually and it doesnt stick. Its forcing me to the other APN still....
bhyde said:
Doug, it didnt work for me...
This is the correct reg
"HKCU\SOFTWARE\MICROSOFT\INTERNETSHARING\LASTCELLCONNECTION CHANGE TO "MEdia Net""
I updated it manually and it doesnt stick. Its forcing me to the other APN still....
Click to expand...
Click to collapse
Thanks for reporting back, removed the cab from my post. So yours is the correct key but it doesn't stick.... hmm. Sounds like flashing a custom rom might be the only way out unless you put a registry tweaking thing in startup.
I just tried this using AT&T Tilt 2 on the stock ROM and it worked.
I could not find any such key called "HKCU\SOFTWARE\MICROSOFT\INTERNETSHARING" so I ignored that part.
I changed HKLM\Comm\InternetSharing\ForceCellConnection to "MEdia Net".
I reset the phone.
I tried to share through a USB connection, but it kept appearing on my computer as a hard drive despite selecting the option for Internet Sharing.
So instead I tried sharing through Bluetooth PAN. It was actually easier than it used to be on WM6.1. I selected Connect from the Internet Sharing program and it brought up a list of Bluetooth pairings. I selected my laptop (win7), which I had previously paired for ActiveSync purposes. The phone said "connecting to computer" and then "connecting to internet" and then it was done.
I accessed websites on my computer and refreshed to make sure it wasn't cached. I checked that my computer's wifi was disabled and that the phone's wifi was not on. Looks like it works.
HKLM\Comm\InternetSharing\Settings\ForceCellConnection to "MEdia Net"
and
HKLM\Comm\InternetSharing\Status\Enabled to "1"
I changed HKLM\Comm\InternetSharing\Settings\ForceCellConnection to "MEdia Net" and it worked. Thanks for the help.
Question...on the stock ROM, does the built-in connection use the wap.cingular connection or the isp.cingular?
I heard it was wrong to use isp.cingular. Should we create a new profile specifically for wap.cingular?
emilware_v1.1 said:
OK
Thanks for posting the issue with internet sharing
Here's the fix
Use reg edit and change these values:
HKCU\SOFTWARE\MICROSOFT\INTERNETSHARING\LASTCELLCALL CHANGE TO "MEdia Net"
HKLM\Comm\InternetSharing\ForceCellConnection change to "MEdia Net"
AT&T blocked option to change connection type so you have to change that in reg.
Now just softreset and enjoy.
PS
I'm using it right now
Click to expand...
Click to collapse
It Works!!!
thanks
Thank You! I am using it now.... Only After installing TotalCommander ( in the Rhodium Software sticky) to eaily do the regedits,
Worked for me. Nicely done!
emilware_v1.1 said:
OK
Thanks for posting the issue with internet sharing
Here's the fix
Use reg edit and change these values:
HKCU\SOFTWARE\MICROSOFT\INTERNETSHARING\LASTCELLCALL CHANGE TO "MEdia Net"
HKLM\Comm\InternetSharing\ForceCellConnection change to "MEdia Net"
AT&T blocked option to change connection type so you have to change that in reg.
Now just softreset and enjoy.
PS
I'm using it right now
Click to expand...
Click to collapse
This method worked for me. Thankfully I have a tetherable TP2 now ^^...only thing is the connection sucks until AT&T fixes their network. Takes forever to load a simple page....
Why can i not find the HKLM folder in total commander.... cause id love to be able to tether my phone....
hixmatt said:
HKLM\Comm\InternetSharing\Settings\ForceCellConnection to "MEdia Net"
and
HKLM\Comm\InternetSharing\Status\Enabled to "1"
Click to expand...
Click to collapse
That works great for me, but after soft reset "HKLM\Comm\InternetSharing\Status\Enabled" reverts back to Value of "0". To use Internet Sharing, I have to edit this value after every soft reset. Any possible fixes for this? Thanks in advance!
Stock AT&T Tilt 2
Edited To Add: It finally stuck! No idea why it took so long.
calexan said:
Why can i not find the HKLM folder in total commander.... cause id love to be able to tether my phone....
Click to expand...
Click to collapse
Doesn't sound like your ready to play with registry (no offense). Always know you can cripple Windows if your not careful. You have to open the "\\Plugins" folder at the top of the root dir of the phone and then select registry. Follow the given instruction from there. Again though, be careful.
Oh im sure im not.... I dont think ive messed with a registry since my Moto v620 years ago. My Tre0 750, just had every cab i ever needed already made.
If its not sticking though... i guess theres really know point till someone figures this thing out. I hate how AT&T blocks certain features....
calexan said:
Oh im sure im not.... I dont think ive messed with a registry since my Moto v620 years ago. My Tre0 750, just had every cab i ever needed already made.
If its not sticking though... i guess theres really know point till someone figures this thing out. I hate how AT&T blocks certain features....
Click to expand...
Click to collapse
======== (UPDATED 11-30-2009) ========
NOTE! -- THIS IS ONLY FOR AT&T CUSTOMERS
I have made a cab version of my fix so that mortscript isn't required. Simply install and restart your phone and your ready to go! (much easier instructions eh?)
That's it!
Works great on my end.... other than AT&T's terrible internet service.
I appreciate the time you took to write the scripts. Havnt figured if they stick though, but now that its easily changed back no worries.
Thanks man