Anytime turn off wifi no 3g available anymore! - Touch HD General

Anytime I turn off wifi connection and try to connect with 3g after it there´s no application can get any access to internet.
Even softreset or deleting and typing new ISP settings don´t work except hardreset until I turn on wifi and turn it off again.
Really weird!
Can anyone help me please!?
Thanks!

I had an issue recently that sounds very similar. I altered some wi-fi settings, specifically to have a fixed IP address on my home network and when I was away from my network, 3G stopped working.
My fix was to use the wizard to set up my data access again from scratch (Start - Settings - Connections - Connections Setup). After this, everything worked again. Not sure if this'll help, but might be worth a try.
I still don't know why one affected the other, but if I go anywhere near my data settings, it happens and is repeatable.

Problem fixed with original rom
Thanks for answer, but I tried your advice couple of times before.
No result!
but its the same, I have static IP at home too and connection works fine but after disabling wifi no internet connect available.
Now I flashed original HTC rom and I have no problem anymore. It has to deal with the cooked roms of Dutty (both versions v1.7 and v1.8 extreme).
I would like use one of these roms but I have to fix that!

I've had the problem and was fixed by - in connections... "Programs that access the internet use:" was "My work network" -ie wifi.. instead should be "Internet over GPRS"
changing it fixed it.
i find it annoying it should have "Try wifi first, if no access THEN use the Expensive data plan"

I´ve had tried that options too...no result!
But it has to deal with your hint I think. Maybe my settings don´t effect like it does with your handheld. Maybe something´s wrong with writing settings in registry?

I have a same issue.

there´re lot of people having that same issue....
Maybe Dutty by himself is able to give us answer?!

I´ve flashed Dutty´s 1.9 now but I have same issue again.
What´s wrong with my settings?
Same settings worked very well in original htc rom.
What the heck is going on?

Related

no WiFi success after ROM update on 8125 -- ideas?

updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
danrw84 said:
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
Click to expand...
Click to collapse
Does wifi turn on? (Does the left LED blink like it does when wifi is turned on?)
If not, then it could be related to a cingular cab - did you install any of the cabs from the original cingular extended rom?
left led does blink.
ive also gotten as far as picking up a network.
i have tried everything, i cannot get my wifi to work at all. i dont know whats up.
the settings i needed (which i replicated for the new rom) on the old rom, was this
I would select networks, MY work network, this connects to the internet.
then in the WLAN adapter i had to manual enter my dns servers.
thats pretty much it to get it to work, but now with this rom it wont
Similar or different problem? Not sure. PARTLY SOLVED!
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
Click to expand...
Click to collapse
Hi NG,
I updated my O2 XDA mini s (German) from OS 1.3.4.2 to 2.16.9.1. (Radio 02.07.10 included). To be honest, I was never really happy with the quality and reliabilty of the radio. 4 out of 5 times it did work, but once in a while, especially while roaming, it gave me a headache. After unlocking and updating to the new version, WLAN looks to be working quite well, at least for connecting to access points, but it seems that it can't browse external websites. VXutils give back a socket error trying to access external (outside my home network) websites/Email.
Internal (inside my home network) connections work like a charm. Termincal Services client accesses my Win2003 Server no problem and I can also connect to a website hosted on my internal server. (http://servername:port).
Whenever I try to connect to external sources, the browser stops afer not successfully "locating" the respective server. On the other hand locating might not be the problem. Performing a ping to an external site with VXutils properly picks up the right ip address but cannot send/receive ping!
GPRS works as supposed. Can connect to sites with no problem.
May be somebody experiences the same problem or, even better, has a solution.
By the way I used @Work for all possible settings. The work profile is set up for both connection types.
Besides that, the new rom is really nice
EDIT Well after some time playing around, I have solved the problem or better the problem partly disapeared. In 'Settings' 'Network Adapters' I switched from Use server-assigned IP address to manual and entered IP, DNS, Gateway, etc. With these settings it everything worked after a soft-reset. Going back to DHCP and soft-reset, it first worked an now it doesn't anymore. At least there is a work around and I'm trying now some other things. All machines currently work with the DHCP settings correct. I will check and keep you updated if the problems comes from Server settings or from something in the PDA EDIT
Lars
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
did you change your Wizard to 802.11g. I found that once I did that, the card stopped working.. the setting was 4, but when i changed it to 8 it stopped worked..
it was some registry key. 802dotg or something ..
sorry i cant rember excatly.
did you change your Wizard to 802.11g. I found that once I did that, the card stopped working.. the setting was 4, but when i changed it to 8 it stopped worked..
it was some registry key. 802dotg or something ..
sorry i cant rember excatly.[/quote]
Darn it. I did. I'll re-wipe and not load the 54g upgrade. Thx.
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
Did you by chance install anything from the cingular extended ROM after you installed the imate ROM?
no i didnt load anything
but i want this wifi to work! what the heck!!
try this
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
Danrw. Concerning the registry settings, after patching the os I did change the registry settings. One already existed with the right value as shown in the 802.11g thread. The other one, DotG, I added.
After that, it did pick up a only G router!
As far as setting DNS manually. It is not enough to just cange the dns setting. You have to enter all the information and even after a soft-reset it takes some time to have the settings picked up... Use vxUTIL 'Info'-Screen to check the current settings. I did test wlan before and after applying packages from the extended rom. No change on reliability or performance on WLAN IMHO.
As far as I understand. Your problem is actually connecting to the router/Access Point. For testing please disable all security on your router and do a soft-reset before trying to access. Also since we have heard of several problems with model 9100 not realizing if an access point is available or not. Also change the SSID of your router and if possible the MAC Address of the router.
Don't forget to soft-reset and first try SDIO Adapter inyour pda with auto IP/DNS/etc. settings.
Another thought. Embarassing, but once I messed around with trying to get a new pda online and forgot to disable the mac filter settings in the router, which resulted in being able to see the active router but it didn't let me connect. After those two days I was missing a lot of hair.
Good luck
Lars
summiter said:
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
Did you by chance install anything from the cingular extended ROM after you installed the imate ROM?
Click to expand...
Click to collapse
I did but only the minimum. I trimmed down their install to the basics. I narrowed it down to one of two CABs. Either the gprsstall or EnableEONS. I didn't install either of those and I"m now back up and running. Of course, I still can't get it to prefer WiFi to EDGE.
I had experienced the same problem with home wifi network after upgrading my rom. I saw in my laptop that the key was set to 2. I went to the network cards, clicked on my wifi network, and under Network Key swithed the value from 1 to 2. I can now connect to my wifi network at home.
eb said:
I had experienced the same problem with home wifi network after upgrading my rom. I saw in my laptop that the key was set to 2. I went to the network cards, clicked on my wifi network, and under Network Key swithed the value from 1 to 2. I can now connect to my wifi network at home.
Click to expand...
Click to collapse
I had same problem after upgrading mda pro with new imate rom 1.30. Can you provide step-by-step tutorial please?I use d-link DSL-G604T wifi router; can connect to home network but when try to surf the web from ppc it always connect through gprs; no access if phone is off.Where can I find Network Key to switch?Any set-up on ppc?
Thanks
I had same problem after upgrading mda pro with new imate rom 1.30. Can you provide step-by-step tutorial please?I use d-link DSL-G604T wifi router; can connect to home network but when try to surf the web from ppc it always connect through gprs; no access if phone is off.Where can I find Network Key to switch?Any set-up on ppc?
Thanks[/quote]
I do not know if my solution will work for you because I upgraded my rom to 2.16 but lets give it a try. I use d-link DI-524 wifi router. Start menu > Settings > Connections (tab) > Network Cards [I must admit earlier today when I was trying to connect my k-jam to the wifi, I did get as far as it asking me for my authentication code and afterwards it timed-out] --> select your wifi network [at this moment as I'm trying this out my wifi on my k-jam is off] --> Network Key (tab) > it was the key index that I had to change from 1 to 2. Before doing this though, go to your router's wireless configuration page through your webbrowser and make sure the keyX (it looks for d-link this can be from key1 to key4 or at least on mine) and make sure the key index you select on your mda is the same number that is used on your router for code authentication.
Also I noticed after resetting my k-jam that I could get connected to my wifi but I could not surf, in wifi setting on my k-jam I had to hit renew ip and then I was able to surf.
I hope this works for you. Good luck and many late nights.
no luck with this for me
even tried removing wep all together. tried multiple routers.
i can detect the ssid's, but i cant connect to them. times out on the connect.
Mine worked no problem...you may already have had this suggestion but here was my process.
Unlocked with lokwiz
Upgraded
Reset before extended ROM apps installed
Installed total commander
deleted extended ROM
Upgraded again
i re-installed the CINGULAR ROM and WiFi works like a charm
......any clues?
Here's what I ended up finding out for mine. First, at the time I wrote this, I was running the 2.16 ROM. Now I'm running the 2.17, but the fix is the same with either.
Don't load the cingular add-ins GPRSSTALL or EONS. I narrowed it down to those two that were causing the issue. So, the only ones I install now are CingularMMSAccount, EdgeIcon, TimeStyle, WiFiRate4, and SmartDialingEnable. Thats it, and its all I've seen to be necessary from Cingular's little bundle 'o fun. Everything else I haven't found interferes with my ability to use the phone at all.
Hope this helps...
kristiandg said:
Here's what I ended up finding out for mine. First, at the time I wrote this, I was running the 2.16 ROM. Now I'm running the 2.17, but the fix is the same with either.
Don't load the cingular add-ins GPRSSTALL or EONS. I narrowed it down to those two that were causing the issue. So, the only ones I install now are CingularMMSAccount, EdgeIcon, TimeStyle, WiFiRate4, and SmartDialingEnable. Thats it, and its all I've seen to be necessary from Cingular's little bundle 'o fun. Everything else I haven't found interferes with my ability to use the phone at all.
Hope this helps...
Click to expand...
Click to collapse
What does timestyle and wifirate4 do? I don't have these installed and haven't seen any problems.

GPRS tries to connect when already connected to Wifi

Hi, i have a very strange and unpleasant problem with my Hermes.. At home I am using my wifi connection to receive mails etc. My Hermes connects to the wifi network normally, but when I want to use internet connection (IE, Outlook..) it will start GPRS. I have to turn wifi of and back on to be able to use it. It is pretty annoying as you can imagine. Now I am using latest Tytn WWE rom, but i have had same problems with T-mobile rom.
My old Wizard is connecting normally and has never done something stupid like this Do anyone have some clue what may cause this strange behaviour?
Have you confirmed that the home WiFi connection is configured as 'Connects to: The Internet'? In comm manager turn off the WiFI then go into settings/connections/Network Cards and you will be presented with all the networks used or previously found by your TyTn wireless card.
Select you named home wireless connection and you will be presented with the screen "Configure Wireless Network". Make sure that the entry against "Connects to:" i sset to The Internet - then press OK (top right), then dismiss the settings windows.
Try the connection again - it worked for me a while back. If already set at "connects to the Internet" then try deleting the settings and creating the entry again: press and hold on the connection (your home WiFi) then select "Remove Settings". Then turn on networked and set it up again remembering to select "connects to the Internet" when asked during the configuration of the WiFi connection. Of course you will again be prompted for a network key if you have a secure wireless router.
- if you all this then sorry but you didn't say. Hope it helps
I have already set it to connect to the internet few days ago. But i will try to remove those settings and do it again.. Hope it will solve the problem.
Thanks for your help. I'll report later..
naciniak said:
I have already set it to connect to the internet few days ago. But i will try to remove those settings and do it again.. Hope it will solve the problem.
Thank's for your help. I'll report later..
Click to expand...
Click to collapse
Mine does the same thing and I am set the same way, even though it connects to GPRS etc it still uses the WiFi (ran speed test on IE to confirm)
Hi
I hear good things about Danielherrero's bandswitch app. This is a long thread and I think there are revisions along the way so best read through a sample of the pages:
http://forum.xda-developers.com/showthread.php?t=286844&highlight=danielherrero
Whether it will solve your particular issue I don't know - but worth a look?
Mike
mikechannon said:
Hi
I hear good things about Danielherrero's bandswitch app. This is a long thread and I think there are revisions along the way so best read through a sample of the pages:
http://forum.xda-developers.com/showthread.php?t=286844&highlight=danielherrero
Whether it will solve your particular issue I don't know - but worth a look?
Mike
Click to expand...
Click to collapse
Hmm.. I am already using that band switcher. Really a great program but unfortunatelly it cannot solve this issue.
But.. I can see a light at the end of the tunnel I've deleted my network settings and than set it again. And now it seems to be working! Hmm.. cannot be quite sure if it isn't just lucky day, but I've tested it more than 10 times and it seems to be OK.
Anyway... thanks for your help
Hopefully it will continue to work.
PS Is "cancer man" still alive or have the ciggies killed him off?
Mike
Glad to hear it worked OK. I too found it was teh only way to get mine initially working - since deleting and recreating the link it has worked OK (3 mths plus)
Aaah.. I heard that cancer man is still alive. But.. trust no one Hope he will not follow the Marlboro Man..
And by the way.. After few hours it still seems to be working. Thanks guys!!
Out of a month of use it has happened to me only once. I just turned off wifi then turned it back on. I believe the tytn is not recognising that it has a valid Internet connection.

PiE not Browsing over 3G

Hi All
Sorry if this is a duplicate thread, I searched but coudln't find anything.
My PiE works fine only under WiFi, but never seems to want to work over my mobile data connection.
My BBConnect, and HTC Home Weather can establish and use the connection no problems, but not with PiE.
Any suggestions on how I can fix this up
Thank you!
...actually pie isn't working at all even over WiFi.
I click on any link, it says connecting then it stops...
i would
1 check the setting in connection advanced to see if it was set to use the right connection to access the internet
2 try another browser then pie (it being the worst browser on the planet could be an issue)
3½ if special network settings for gateway and or dns was set i would remove them or change them to the connect ones
Rudegar said:
i would
1 check the setting in connection advanced to see if it was set to use the right connection to access the internet
2 try another browser then pie (it being the worst browser on the planet could be an issue)
3½ if special network settings for gateway and or dns was set i would remove them or change them to the connect ones
Click to expand...
Click to collapse
My other programs (BBConnect, HTC Weather) have no problems getting on.
Just PIE (was set for Rogers Internet) I also tried My Blackberry and HTC Home still updates, but not PIE....
I thought I would bump this.
I gave up and did a re-install. Everything was fine for a bit, and its back again.
All I have installed is SyncML Client, VJDevice Lock, Today Agenda, voice command BBConnect.
Its ONLY IE that won't work. I would really appreciate some help with this one!
So it is the blackberry software that is doing it. I think it is forcing you to use that, rather than the regular data connection.
If anyone can help me manage this, I would appreciate it.
Thank you!
I have a similar browser related problem...
Everything works on 3G, GPRS, WiFi, etc... EXCEPT PIE only does not work with WiFi, same symptoms you are receiving. I have to turn off the WiFi to get PIE to work. With WiFi on, email and all other connectivity programs can stilll get data from the web.
There is something here where PIE settings are somehow slightly different than the WiFi connection....
Anyone have any ideas? The fix for me would also fix the same issue for you...
...and a follow up to the issue, if I wanted to change the default browser in WM6 to NetFront of Opera, how would I go about doing that?

The battle for wifi

Hi guys. If you don't remember me - here's my story in a nutshell. I got a 8525 about a week ago. Since day one I tried and tried and tried but never managed to get the wifi working... (as you can imagine I am beyond desperate at this point)
Anyway last night I got thinking and decided to give it another stab. I hard reset, messed with the settings again...and this time manage to get a little further. My phone is now showing me as "connect to network", only problem is I get a message saying "Cannot connect with current connection settings. To change connection settings, tap Settings." each time I try to access anything internet related. I know I'm close especially since I'm actually connected now, I think it's just AT&T's rom doing everything it can to get me to use their networks (I'm on T-Mobile and don't have a dataplan anyway...).
Anyway can you guys think of what the problem might be? I'm so close I can taste it! Thanks.....
Bump... Anyone home?
where did you get your 8525? my wifi on my 8525 works perfectly fine, have u tried upgrading to WM6?
I have WM6 already. I got it off ebay. Everything is perfectly fine with it, it just doesn't want to use the wifi connection to get online.
Try a hard rest.
my 1st 8525 i got off ebay, and it worked great up until a few weeks ago, when the screen stopped functioning it just turned white, i called AT&T and they sent me a new 1 i just got it this morning and now, i cant make calls >.> it will ring then my phone will say i have no service when i have full service and the call will end. but my wifi is fine... did u use the WM6 upgrade that was released by AT&T
No thanks re: the hard reset. I've already done that... If I can't figure this out I'm going to sell my phone and steer clear of ppc phones. I like it, but I bought it for wifi and this is just getting ridiculous. I have tried everything. I've spent hours and hours on this. I've reset my router god knows how many times, played with security settings, reset my phone over and over to start over.....
The worst part now is that I know it's connected. The wifi aspect is fine. It's just the stupid phone not wanting to use the wifi connection for the internet.
Maybe someone with a 8525 and a Linksys router can post ALL of their wireless related settings for me.
Ekh
Yes I used the AT&T update.....
i use wifi and my linksys router, the 8525's range isnt that great u need to be within a few feet of the router to get good reception, im about 30 feet from mine and i get 2 Wifi signal bars and an ok speed. but try this
Start > Programs > Proxy Manager > Disable Proxy
then try to use your wifi, then go back and restore the proxy when your done, i think some 1 told me to do that because att uses that so u can use their internet service or sumthin
Thanks but I'm way ahead of you. I've already tried every piece of advice I've come across on xda. My last hope is someone elses detailed settings.
is your network passworded by a WEP or TKIP ?
It's WPA... My device has the password, and I added the MAC to my router table. It's connecting to the router/wifi...
...it's just that my device won't use the connection
* Sigh * Looks like another one of my please help me posts has gone dead...again...
olly666 said:
...it's just that my device won't use the connection
Click to expand...
Click to collapse
Your problem may be one of the following:
1. The wifi connection is specified as connecting to "work" and programs are set to use an internet connection.
2. The wifi connection is specified as connecting to "internet" and programs are set to use a work connection.
Nope that's not it. But it does remind me of something so thanks. I deleted all the connections seeing as I don't have a dataplan... I made a new connection called "Wifi". BUT, it's not like I can specify any connection for it so it's just blank (no connection specified). By this I mean the options for a connection are:
bluetooth, cellular line, cellular line (GPRS, 3G), Generic IrDA, Hanes...COM1. No option for wireless...
Does that help?
Check that your router is set to allow connections by devices with 802.11b, which the Hermes uses. Most default to 802.11g only.
It's set for b and g
Helloooo...?
Hallelujah!!!!!
People, I have WIFI!!!
Thanks to everyone who tried to give a helping hand... It's really appreciated.
For future reference to those who are suffering from the same problem - this is what seemed to fix it... I entered google into IE via it's IP address rather than it's name (open command prompt, ping google.com...). To my surprise the page quickly loaded. I then instantly realized that the problem was with the DNS settings. I opened up "Wi-Fi" in settings, went to the "Network Adapters" tab at the bottom and entered in the DNS addresses for "IEEE 802.11b/g...". If you need help with this just PM me (I consider myself somewhat of an expert on this topic now).
I thought I was never going to get online. There IS a god!

No Data Connection after flashing!!

Hey guys, i have flashed to a few ROMs in the past and my phone would always give me the trouble of no data connection. My tmobile wing is hard spl and running currently on papa's black diamond. whenever i tried to go to the comm manager to activate the data connection, it just wont turn on while other buttons i have no problem turning on such as wlan and bluetooth.
i've also tried launching internet but it just says there's no data connection and ask me to go to settings. i still can make calls but just completely no data connections. i have also soft resetted it several time and no luck. =/
help would be great!
ps. i've looked up several other threads with the same problem, however, theres really nothing under connections except add new so it didnt help much.
cbbplanet said:
Hey guys, i have flashed to a few ROMs in the past and my phone would always give me the trouble of no data connection. My tmobile wing is hard spl and running currently on papa's black diamond. whenever i tried to go to the comm manager to activate the data connection, it just wont turn on while other buttons i have no problem turning on such as wlan and bluetooth.
i've also tried launching internet but it just says there's no data connection and ask me to go to settings. i still can make calls but just completely no data connections. i have also soft resetted it several time and no luck. =/
help would be great!
ps. i've looked up several other threads with the same problem, however, theres really nothing under connections except add new so it didnt help much.
Click to expand...
Click to collapse
AHHHHHHHHHHHHHHHHHHHHHHHHHHAAAAAAAAAAAAAAAAAAAHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHAAAAAAAAAAAAAAAA!
cbbplanet said:
Hey guys, i have flashed to a few ROMs in the past and my phone would always give me the trouble of no data connection. My tmobile wing is hard spl and running currently on papa's black diamond. whenever i tried to go to the comm manager to activate the data connection, it just wont turn on while other buttons i have no problem turning on such as wlan and bluetooth.
i've also tried launching internet but it just says there's no data connection and ask me to go to settings. i still can make calls but just completely no data connections. i have also soft resetted it several time and no luck. =/
help would be great!
ps. i've looked up several other threads with the same problem, however, theres really nothing under connections except add new so it didnt help much.
Click to expand...
Click to collapse
I think you have to use the Network Wizard. If it is not in that rom, can install it using the cab, it's should be around this forum.
thanks live! but i'm not sure which network wizard cab file works and which doesnt.. so a friend helped me set it up manually. thanks though!!
papamopps said:
AHHHHHHHHHHHHHHHHHHHHHHHHHHAAAAAAAAAAAAAAAAAAAHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHAAAAAAAAAAAAAAAA!
Click to expand...
Click to collapse
What, have you heard that question before?
Ryan
yes my fone is having the same problem and now i cant flash to a new rom
i flashed for the first time yesterday, and had the same problem. just call tmobile and tell them somehow your data connection information has deleted, and they will run u through what to put in the fields. and don't forget to go to the network wizard, to make sure its on the right network.
Same problem except it WAS working (my gprs/edge) until I added my first wlan entry.. of my apartment's wifi which works. But after I was done using it i turned the wlan off from comm manager and expected to see the big E for edge and instead just see the two arrows with the little x under it. I can no longer connect to gprs/edge. If i open the internet explorer to view a page, it flashes a "G" with the arrows like it's trying to connect forever. At that point it will not even let me make or receive calls until I reboot the ppc. Network wizard won't fix it as I've already tried, twice... no change. My data connection for T-mobile is set up already under "connections tab" but it just doesn't work. My best guess is something has gone wrong in the registry... but as much as I've searched for this kind of problem I find nothing... just stuff how to fix wlan problems. btw, i'm on tmobile. Oh, it won't even activesync if my wlan is off now... I have to enable the wlan and let it connect to my home network... and THEN it will go through activesync without error. This is nuts, I already hard resetted once because of this and now it's the same story. Maybe it's just a prob with the opentouch 6.5 nofrills version that's just basic and let's the users add their own apps.

Categories

Resources